this turns out to have never been set??? We have config.device anyways,
so let's use that instead.
Tweaked-by: Oliver Smith <ollieparanoid@postmarketos.org>
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
One flaw of pathlib is that Path("/tmp/") / "/some/relative/path"
results in Path("/some/relative/path")....
Fix the places in the codebase where we get this wrong.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Introduce a Deviceinfo class and use it rather than the dictionary. This
gives us sweet sweet autocomplete, and lays the foundation for having a
proper deviceinfo validator in the future.
Additionally, continue refactoring out args...
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Cease merging pmbootstrap.cfg into args, implement a Context type to let
us pull globals out of thin air (as an intermediate workaround) and rip
args out of a lot of the codebase.
This is just a first pass, after this we can split all the state that
leaked over into Context into types with narrower scopes (like a
BuildContext(), etc).
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
With the new chroot type, we can now write fancy paths in the pythonic
way. Convert most of the codebase over, as well as adding various other
type hints.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
We use a custom verbose log level in pmbootstrap, unfortunately it isn't
possible to correctly type this due to some limitations in the logging
library [1], [2].
Given that our usecase is fairly simple, we can just wrap the module
with our own so we only have to tell mypy to ignore the error once
instead of at every callsite.
[1]: https://github.com/cryptax/droidlysis/issues/15
[2]: https://github.com/python/typing/discussions/980
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Introduce a new module: pmb.core to contain explicitly typed pmbootstrap
API. The first component being Suffix and SuffixType. This explicitly
defines what suffixes are possible, future changes should aim to further
constrain this API (e.g. by validating against available device
codenames or architectures for buildroot suffixes).
Additionally, migrate the entire codebase over to using pathlib.Path.
This is a relatively new part of the Python standard library that uses a
more object oriented model for path handling. It also uses strong type
hinting and has other features that make it much cleaner and easier to
work with than pure f-strings. The Chroot class overloads the "/"
operator the same way the Path object does, allowing one to write paths
relative to a given chroot as:
builddir = chroot / "home/pmos/build"
The Chroot class also has a string representation ("native", or
"rootfs_valve-jupiter"), and a .path property for directly accessing the
absolute path (as a Path object).
The general idea here is to encapsulate common patterns into type hinted
code, and gradually reduce the amount of assumptions made around the
codebase so that future changes are easier to implement.
As the chroot suffixes are now part of the Chroot class, we also
implement validation for them, this encodes the rules on suffix naming
and will cause a runtime exception if a suffix doesn't follow the rules.
* Check that we're not already running lk2nd as flashing boot partition
inside lk2nd is different to flashing boot partition outside. We could
improve this in the future to use "flash lk2nd lk2nd.img" as
documented in the file.
* Grab the lk2nd package from the device package and install that. The
device package is expected to have a dependency on the correct lk2nd
package.
* Remove some log message in unusual styles for pmbootstrap.
* Group flash_lk2nd action together with the other flash actions and use
string comparison.
See also: https://gitlab.com/postmarketOS/pmaports/-/issues/2074
Reviewed-by: Oliver Smith <ollieparanoid@postmarketos.org>
Link: https://lists.sr.ht/~postmarketos/pmbootstrap-devel/%3C20230605104026.744005-1-luca@z3ntu.xyz%3E
When using a kernel from Alpine the kernel configuration cannot be
found in pmaports. We cannot check the kernel config for missing
options in that case, but that's no reason to break the flasher
entirely.
kernel is named /boot/vmlinuz now, looking at the filename will no
longer tell us what flavor it is. This now will look at
/usr/share/kernel, which has always contained the kernel 'flavor', and
since we currently only install 1 kernel these days, guarding this with
pmaports.cfg should be unnecessary. In the worst case (if there are
multiple kernel 'flavors' installed), it'll just grab the first one and
return it.
Flashes device vbmeta partition (can be overriden with
"flash_fastboot_partition_vbmeta" setting in deviceinfo)
with custom vbmeta.img which has verity flag disabled,
so device can boot postmarketOS with no problems.
While at it, also remove unnecessary "#!/usr/bin/env python3" in files
that only get imported, and adjust other empty/comment lines in the
beginnings of the files for consistency.
This makes files easier to read, and makes the pmbootstrap codebase more
consistent with the build.postmarketos.org codebase.
asus-me176c has a Fastboot interface that can be used for flashing,
but in postmarketOS we do not use Android boot images for it.
This is because is it not very practical - the boot partition is
quite small and there is a (custom) EFI bootloader that can boot
directly from any other FAT32 partition.
At the moment the installation process is manual:
1. pmbootstrap install --split to have separated boot (FAT32)
and rootfs images
2. pmbootstrap export
3. Flash boot and rootfs images manually using Fastboot
The "fastboot-bootpart" flasher implements that process in a more
convenient way. When a device uses the "fastboot-bootpart" flasher:
- We generate --split images on "pmbootstrap install" by default.
(This can be disabled using --no-split instead.)
- pmbootstrap flasher flash_kernel flashes the raw boot partition
(not an Android boot image) using Fastboot, just like the rootfs.
There are some limitations that could be improved in the future:
- "fastboot-bootpart" is not offered in the device wizard.
I think it is special enough that no-one will be starting with it,
and the difference to normal "fastboot" might be confusing.
- Support "pmbootstrap flasher boot". asus-me176c does not support
"fastboot boot" properly, but theoretically we could still generate
Android boot images to use when booting an image directly.
- At the moment the boot partition image is not regenerated when
using "pmbootstrap flasher flash_kernel" (unlike when using Android
boot images). "pmbootstrap install" needs to be run manually first.
At the moment, pmbootstrap updates the kernel and the initfs whenever
using the flasher or export. This is useful, but sometimes you just want
to boot exactly the same kernel several times. In that case, having to wait
several seconds for the (redundant) update to complete is quite annoying.
Add a --no-install option that allows skipping the kernel/initfs update.
Follow-up to !1373, where `pmbootstrap flasher flash_system` was
replaced with `pmbootstrap flasher flash_rootfs`. We still had used
terms like "system partition" in a lot of places.
This commit replaces it everywhere, so it's clear that we're talking
about the pmOS rootfs (which may or may not be installed to Android's
system partition).
* Change `pmbootstrap flasher flash_system` command to
`pmbootstrap flasher flash_rootfs`
* The old command still works, but all references have been changed to
the new command
* Remove obsolete `pmbootstrap flasher export` (that was changed to
`pmbootstrap export` a few months ago)
* Update `README.md` and ZSH auto completion
* Change the description of the generated rootfs image (not talking
about a system image anymore, mention that it has subpartitions)
* Better description of `pmbootstrap flasher flash_rootfs --partition`
* Rename deviceinfo variable flash_methods to flash_method
* Update pmb.config.deviceinfo_attributes / add sanity check
* Add test case that parses all deviceinfo files
This adds a new deviceinfo 'flash_fastboot_max_size' used for
preventing fastboot from flashing a system partition that is too
large. Some devices do not support flashing over a certain size
(e.g. 500MB).
* Allow to specify a custom username in "pmbootstrap init"
* Build chroots have "pmos" instead of "user" as username now
* Installation user UID is 1000 now (as in all other Linux distributions)
* Adjust autologins
* postmarketos-base: enable wheel group for sudo, removed previous sudoers file
* Implement safe upgrade path:
We save the version of the work folder format now, in $WORK/version.
When this file does not exist, it defaults to 0.
In case it does not match the currently required version
(pmb.config.work_version), then ask the user if it should
automatically be upgraded.
* Check kernel config
* Allow specifying multiple kernel packages, and also no packages
which defaults to scanning all kernel configs (it is super fast
anyway)
* Add the check to Travis CI
* Adjust existing kernel configs, so they pass the kconfig_check.
(We've had to put in a lot of defaults in the aarch64
linux-postmarketos configs, that's why the diff is a bit unclean.)
* Increase modified kernel pkgrels
* moved export code to pmb/export and split it up
* added deprecation notice to "pmbootstrap flasher export"
* made "pmbootstrap export" work
* adjusted the "pmbootstrap flasher export" hints in the code
