Translate the pmaports channels "stable" to "v20.05" and "stable-next"
to "v21.03", so these have the same channel name as the pmaports.git
branch name.
The original plan was to switch the "stable" channel from the "v20.05"
branch to the "v21.03" branch when the release is done. However, now
that we are close to that, I'm realizing that this would not be useful.
It would lead to conflicts in the dir with locally built packages
(default: ~/.local/var/pmbootstrap/packages/$CHANNEL). And it would make
it awkward to go back to a previous branch (we may name it old-stable
for the time being, but what after that, old-old-stable?).
Unmaintained devices are device packages that:
- Are known to be broken in some way without an active maintainer
who can investigate how to fix it, or
- Have not received any updates for a very long time, or
- Are discouraged from using because they are just intended for testing.
An example for this are ports using the downstream kernel for devices
which have a mainline port that is working quite well.
Unmaintained devices are still built by bpo (otherwise it would not make
sense to keep them), but they do not show up in "pmbootstrap init".
However, it is possible to manually select them by entering the name.
pmbootstrap will warn in that case.
Unmaintained packages should have a # Unmaintained: <reason> comment
in the APKBUILD, this comment is displayed in "pmbootstrap init"
so that the user knows why the device should not be used unless they
know what they are doing.
Packages like binutils-*, busybox-static-*, gcc-*, grub-efi-*, musl-*
are only needed for the native architecture during cross compilation.
Don't bother with trying to build them for other arches to save time and
to avoid getting stuck frequently at "armv7/binutils-aarch64" etc.
A few people like to use pmbootstrap on aarch64 hosts (e.g. PineBook
Pro), so let's make it available for aarch64 again when we can build
aarch64 packages natively in CI and bpo. (They do get stuck there right
now, because of qemu user emulation.)
Related: https://gitlab.com/postmarketOS/build.postmarketos.org/-/issues/75
Some Mediatek devices have a special 512-byte header around the zImage
which must be generated so the device boots.
Support for that exists for a while in postmarketOS but detection was
missing. Add that.
Let UI meta-packages specify apps in "pmb_recommends" to be explicitly
installed by default, and not implicitly as dependency of the UI
meta-package ("depends"). Therefore make these apps uninstallable,
without removing the meta-package.
Add pmbootstrap install --no-recommends to disable this feature.
Copy from current pmaports master, so pmbootstrap doesn't complain about
missing deviceinfo_codename when parsing it. Right now pmbootstrap
doesn't complain about this, but with the next patch it will attempt to
parse the file.
This replaces the year from 1337 to 2012 too, but let's rather have it
slightly more maintainable than introducing a diff for a funny reference.
"Chassis" defines the what kind of device a device is. Currently the
following standardized types exist:
"desktop", "laptop", "convertible", "server", "tablet", "handset",
"watch", "embedded", "vm", "container"
This property is exposed by org.freedesktop.hostname1 (e.g.
openrc-settingsd) and can be used by applications for example to display
appropriate strings instead of "About this phone" for non-phone devices.
Use mirrordir_pmos and mirrordir_alpine from channels.cfg to generate
the mirror URLs for postmarketOS and Alpine, which get written to
/etc/apk/repositories and which postmarketOS uses to download the
APKINDEX files.
Remove hardcoded "master" at the end of the postmarketOS mirror and use
mirrordir_pmos instead (which is "master" for the edge channel). Let the
postmarketOS mirror end in a '/' for consistency with the Alpine mirror
in pmb/config/__init__.py.
Remove obsolete --alpine-version. To experiment with a different Alpine
version, one should pass a custom --config-channels from now on.
Prepare to base postmarketOS on Alpine stable by parsing the new
channels.cfg file in pmaports.git, that describes which channel
needs which branches and mirror dirs from postmarketOS and Alpine.
Use the information in pmb.helpers.git.get_branches_official() first,
more is coming in follow-up commits.
Read the file from origin/master, so we get the latest fetched version
even if the last checked out master branch is not up-to-date (think of
currently checked out release branch instead of master, master will
never be updated to point to latest origin/master). Allow to override
the file with a new --config-channels parameter.
Related: https://postmarketos.org/channels.cfg
Let apkbuild-lint check options again, and pass the pmbootstrap specific
options with the new CUSTOM_VALID_OPTIONS variable. Add a test case and
adjust pmb.helpers.lint.check to return the output of apkbuild-lint, so
we can properly test it.
Related: https://gitlab.alpinelinux.org/Leo/atools/-/merge_requests/28
Fixes: pmaports#553
In the future, device ports will be located in a subdirectory
below device/... (e.g. device/testing/device-...).
Replace all occurrences of device/* with a glob that checks the
subdirectories instead.
Note: To ensure that this always works properly we should also add some
checks that all devices are indeed located under one of the supported
subdirectories (i.e. testing/community/main).
Change the glob for pmaports to <aports>/**/APKBUILD.
This allows using subdirectories for organization outside of device/
as well.
At the moment we have a simple subpkgdesc() function that can only
parse "pkgdesc" from subpackages, without support for any variables.
But we have a quite nice variable parser now that can be extended
to work for subpackages.
Simply put this works by:
- Finding the lines that belong to the subpackage function
- Stripping indentation (tab)
- Parsing relevant attributes similar to the apkbuild() function
The "subpackages" in the parsed APKBUILD are replaced by a dict
of subpkgname: {"pkgdesc": "...", "depends": "..."} which are
parsed from the subpackage function (if found).
This makes it possible to get the "depends" of a subpackage.
At the moment we parse all attributes, split them, and eventually
join them back together for variable replacement.
Replacing variables immediately after parsing (before splitting)
has several advantages:
- No need to handle different value types
(e.g. lists by joining them every time they are accessed)
- Variables like depends="$depends ..." are handled directly
by the variable parser
- APKBUILDs are shell scripts, so we match abuild more closely
if variables defined later do not affect previous attributes
When defining a new kernel subpackage with a "-" in it
(e.g. $pkgname-kernel-mainline-modem), then pmbootstrap is unable to
find the function that builds the subpackage:
ERROR: Could not find subpackage function, no line starts with 'kernel_mainline-modem() {'
This is because it assumes that a $pkgname-kernel-<name> subpackage
is built by a kernel_<name> function, but this does not have to be the case.
We should really respect the name of the subpackage function that
is specified when defining the subpackage, but unfortunately it is
stripped away in cut_off_function_names().
For now let's fix this by replacing "-" with "_", but ideally the
APKBUILD parser API should be refactored to expose the subpackage
function in the future.
postmarketOS/pmaports!700 adds a new "deviceinfo_bootimg_dtb_second"
option that places the DTB in the "second" area of the Android boot
image.
Attempt to detect this automatically by checking the extracted
second binary for the FDT magic (0xd00dfeed).
This MR add the --fork-alpine argument to the pmboostrap aportgen
command, which downloads the APKBUILD and related files and copies them
into the pmaports/temp folder.
Properly handle the following two cases in APKBUILDs:
* depends="$depends ..."
* depends="${depends} ..."
First I've attempted to refactor the parsing code to do this in a more
generic way. But I've realized that it would make more sense to retire
the python based APKBUILD parsing approach altogether and finally use a
shell script parser. Let's discuss this in #1801.
Explicitly depend on mpc1. Our generated gcc aports use the !tracedeps
option, so we need to explicitly set the libraries it depends on.
This has mostly not been an issue, as we are installing our gcc
packages together with Alpine's gcc package, which causes the libraries
to get installed anyway.
Related: pmaports#236
Provides a quick way to incrementally compile a kernel and push it to
device.
Example usage.
Compile the kernel:
$ cd /src/linux/
$ source /src/pmbootstrap/helpers/envkernel.sh
$ make tegra_postmarketos_defconfig
$ make -jX
Package kernel and flash to device:
$ pmbootstrap build --envkernel linux-samsung-p4wifi
$ pmbootstrap flasher flash_kernel
Modify kernel source then incremental compile, package, and flash:
$ make -jX
$ pmbootstrap build --envkernel linux-samsung-p4wifi
$ pmbootstrap flasher flash_kernel
APKBUILD should be indented with tabs not spaces.
This also resolves a bug which the replace_functions feature was always
trimming off the beginning of a line.
For example:
replace_functions = {"build": "return 0"}
would be formatted as "rn 0".
test_aportgen.py fails because some test data is missing.
Make the test pass by fixing the test data with the following changes:
- Update testdata pmaports/cross/*
- Don't git ignore test/testdata/aportgen directory
- Add testdata aports/main/* from upstream Alpine Linux aports
Patch files in pmaports/cross/binutils-armhf were removed, as they are
not needed to test the pmbootstrap code.
* Travis and Coveralls badges
* aports: instead of <https://github.com/postmarketOS>, use
<https://postmarketos.org>
* References to full URLs to issues and pull requests replaced with
a hash and the number
* grsec check: simplify error message, remove link to github issue
(nobody is using that anymore anyway)
`pmbootstrap pkgrel_bump --auto` automatically increases the pkgrel for
packages linking against libraries, which don't exist anymore (because
the soname has been changed). The feature is explained in detail in
The previous implementation did not detect soname breakage, when a
subpackage linked against a certain library, but the main package
did not (e.g. `qt5-qtbase-mysql` and `qt5-qtbase`). This was, because
we iterated over the aports/* to find the packages to be checked.
To fix this, we are iterating over the packages found in the APKINDEX
files instead (of both the locally compiled packages and the downloaded
index from the pmOS mirror).
Details:
* `pmb/helpers/pkgrel_bump.py`:
* Rewrite `auto_apkindex_package()` to act upon a given parsed
`aport` and `apk` (from the index) instead of finding the `apk`
dict by itself (we need it earlier anyway).
* Rewrite `auto()` to iterate over APKINDEX files instead of aports
* Skip packages already found, so the `pkgrel` does not get
increased multiple times when the same package was found in
multipe index files.
* Put the package name at the beginning of the log messages to make
them more readable
* testdata: Create a new `testsubpkg` aport, where only the subpackage
links against `testlib`
* Adjust testing code to test everything with `testsubpkg` as well.
NOTE: This makes the command a bit slower, but we could improve
performance again by smart caching of `pmb.parse.apkindex.depends()`.
This could come in a future PR, the important part here is that the
command is bug-free again with this fix.
