Building packages without git installed caused error messages from git
appearing on the screen, and I patched it upstream (see #1209).
However, this introduced a regression: when git *is* installed and the
aport folder *is not* part of a git repository (like we do it with
pmbootstrap), the build gets aborted now with git complaining that
the folder is not a valid git folder.
But the only case where this happens is, when abuild is trying to
include the git repositories' commit hash for the APKINDEX description.
This pmbootstrap commit hardcodes "postmarketOS" as APKINDEX
description, so it does not fail anymore.
## Introduction
In #1302 we noticed that `pmb.chroot.user()` does not escape commands
properly: When passing one string with spaces, it would pass them as
two strings to the chroot. The use case is passing a description with
a space inside to `newapkbuild` with `pmboostrap newapkbuild`.
This is not a security issue, as we don't pass strings from untrusted
input to this function.
## Functions for running commands in pmbootstrap
To put the rest of the description in context: We have four high level
functions that run commands:
* `pmb.helpers.run.user()`
* `pmb.helpers.run.root()`
* `pmb.chroot.root()`
* `pmb.chroot.user()`
In addition, one low level function that the others invoke:
* `pmb.helpers.run.core()`
## Flawed test case
The issue described above did not get detected for so long, because we
have a test case in place since day one, which verifies that all of the
functions above escape everything properly:
* `test/test_shell_escape.py`
So the test case ran a given command through all these functions, and
compared the result each time. However, `pmb.chroot.root()`
modified the command variable (passed by reference) and did the
escaping already, which means `pmb.chroot.user()` running directly
afterwards only returns the right output when *not* doing any escaping.
Without questioning the accuracy of the test case, I've escaped
commands and environment variables with `shlex.quote()` *before*
passing them to `pmb.chroot.user()`. In retrospective this does not
make sense at all and is reverted with this commit.
## Environment variables
By coincidence, we have only passed custom environment variables to
`pmb.chroot.user()`, never to the other high level functions. This only
worked, because we did not do any escaping and the passed line gets
executed as shell command:
```
$ MYENV=test echo test2
test 2
```
If it was properly escaped as one shell command:
```
$ 'MYENV=test echo test2'
sh: MYENV=test echo test2: not found
```
So doing that clearly doesn't work anymore. I have added a new `env`
parameter to `pmb.chroot.user()` (and to all other high level functions
for consistency), where environment variables can be passed as a
dictionary. Then the function knows what to do and we end up with
properly escaped commands and environment variables.
## Details
* Add new `env` parameter to all high level command execution functions
* New `pmb.helpers.run.flat_cmd()` function, that takes a command as
list and environment variables as dict, and creates a properly escaped
flat string from the input.
* Use that function for proper escaping in all high level exec funcs
* Don't escape commands *before* passing them to `pmb.chroot.user()`
* Describe parameters of the command execution functions
* `pmbootstrap -v` writes the exact command to the log that was
executed (in addition to the simplified form we always write down for
readability)
* `test_shell_escape.py`: verify that the command passed by reference
has not been modified, add a new test for strings with spaces, add
tests for new function `pmb.helpers.run.flat_cmd()`
* Remove obsolete commend in `pmb.chroot.distccd` about environment
variables, because we don't use any there anymore
* Add `TERM=xterm` to default environment variables in the chroot,
so running ncurses applications like `menuconfig` and `nano` works out of
the box
The `suffix` argument was not specified in chroot commands executed in
`pmb.build._package.override_source()`. Because of that, it was not
possible to use "build --src" when compiling in a non-native chroot,
for example:
```
$ pmbootstrap build hello-world --arch=armhf
...
(native) % rm /tmp/APKBUILD.append
rm: can't remove '/tmp/APKBUILD.append': No such file or directory
```
### Only download APKINDEX for relevant architectures
We're downloading the APKINDEX files for all architectures supported by
postmarketOS currently (x86, x86_64, armhf, aarch64). Most of the time,
we only need it for the native and device arch, so this PR reduces the
downloaded files to what is really necessary.
### Intuitive pmbootstrap update logic
* pmb.helpers.repo.update():
* Default is updating all arches where the APKBUILD files exist
* Add existing_only parameter
* Return True when files have been downloaded
* Properly print which arches will be updated
* Print update reason only in verbose log
* Add and improve comments
* pmb.parse.arguments(), update action:
* Add --non-existing parameter
* Default for --arch is None (instead of arch.native)
* pmb.helpers.frontend.update():
* Inform about --non-existing if no APKBUILDs have been updated
* The APKINDEX parser used to return a dictionary with one package for
a given package name. This works for the installed packages database,
because there can only be one provider for a package. But when
parsing packages from binary repositories, we need to support
multiple providers for one package. It is now possible to get a
dictionary with either multiple providers, or just a single provider
for each package.
* Dependency parsing logic has been adjusted, to support multiple
providers. For multiple providers, the one with the same package
name as the package we are looking up is prefered. If there is none
(eg. "so:libEGL.so.1" is provided by "mesa-egl"), it prefers packages
that will be installed anyway, and after that packages that are
already installed. When all else fails, it just picks the first one
and prints a note in the "pmbootstrap log".
* Added testcases for all functions in pmb.parse.apkindex and
pmb.parse.depends
* pmbootstrap chroot has a new "--add" parameter to specify packages
that pmbootstrap should build if neccessary, and install in the
chroot. This can be used to quickly test the depencency resolution
of pmbootstrap without doing a full "pmbootstrap install".
Fixes#1122.
* New "pmbootstrap build --src=/local/source/path hello-world" syntax
* The local source path gets mounted inside the chroot
* From there, a copy of the source code gets created with rsync (so
we can write into the source folder if necessary, for better
compatibility with all kinds of APKBUILDs)
* After the aport gets copied into the chroot before building (as
usually), we extend the APKBUILD with overrides to make it use
mountpoint's source instead of downloading the package's source
from the web as usually
* The package built with the local source gets _pYYYYMMDDHHMMSS
appended to the pkgver
* linux-postmarketos-mainline: use $builddir, fix patch checksum
Right now, they appear on screen when using --details-to-stdout. This
does not work well with Travis CI and screws up the log.
Disabling the progress bars in abuild works just like Alpine does it in
their Travis CI script: Exporting SUDO_APK as
"abuild-apk --no-progress" instead of "abuild-apk".
test_check_checksums.py: Run "pmbootstrap build_init" before building
any packages, so it is a bit less verbose (downloading the APKINDEX
files etc.). Later we run the build init code again (because we use
--strict while building the packages), but then the APKINDEX files
are already present. So overall the log is a bit shorter before the
building starts. (It is still logged to the logfile, which gets
printed on error anyway.)
Follow up to #1162.
* `pmb.build.buildinfo()`: Used to record the build environment. It is
flawed because it scans the repo APKINDEX files instead of using the
actually installed packages list. When it was implemented we were not
able to do the latter. After this is removed, `pmb.parse.depends` can
be simplified (it needs to be rewritten for #1122).
* `pmb.helpers.repo.diff()` and `pmb.helpers.repo.files()`: These were
used exclusively by `pmb.build.buildinfo()`, to learn about which
files have been changed in the local repository folder after a
package was built. The idea was, that we could find subpackages that
way. But this information is present in the installed package list as
well, which is a much cleaner approach.
* ccache: Fix for distcc cross-compiling / various improvements
* Make ccache work when cross-compiling with distcc (fix#716)
* Allow to configure the ccache size in "pmbootstrap init"
* Moved ccache stats code from pmb/build/other.py to
pmb/helpers/frontend.py
* Grouped job count, ccache size and timestamp based rebuilds
together to "build options" and allow to skip them
* Sorted config options that had to be modified anyway
alphabetically
* Improve comment in arch-bin-masquerade APKBUILD
* Rename pmb/build/package.py to pmb/build/_package.py, so we can
access the functions it contains in testcases, and still use
pmb.build.package()
* Refactor the entire file. Instead of one big function that does
too many things, we have many small ones now, that are tested
in the testsuite and easier to modify
* Whenever building a package, pmbootstrap does not only build and
install the "makedepends" (like we did before), now it does the
same for the "depends". That's required to be compatible with
abuild. The old behavior can still be used with 'pmbootstrap
build --ignore-depends'.
* Because of that change, noarch packages can no longer be built in
the native chroot if we need them for a foreign chroot. A device-
package depending on a kernel would pull in the same kernel for
the native architecture otherwise.
* Running 'pmbootstrap build device-...' without '--ignore-depends'
and without a matching '--arch' displays a note that explains
this change to the user and tells how to use it instead.
* Noarch packages no longer get symlinked. That was only
implemented for packages built in the native chroot, and now that
is not always the case anymore. Symlinking these packages creates
packages with broken dependencies anyway (e.g.
device-samsung-i9100 can't be installed in x86_64, because
linux-samsung-i9100 is armhf only).
* Rename "carch" to "arch" wherever used. Naming it "carch"
sometimes is confusing with no benefit.
* Add a testcase for the aarch64 qemu workaround (because it failed
first and I needed to know for sure if it is working again).
* Improved some verbose logging, which helped with development of
this feature.
* Removed the old "build" test case (which was disabled in
testcases_fast.sh) as the new "build_package" test case covers its
functionallity.
* Only build indexes if the packages folder exists for that arch (Travis
couldn't run a test case otherwise)
