Mirror/betaflight-configurator
1
0
Fork 0
mirror of https://github.com/betaflight/betaflight-configurator.git synced 2025-07-25 09:15:49 +03:00
Code Issues Wiki Activity

jBox Tooltip implementation using i18n_title instead of jBox:Content - reduces DOM element counts

Browse source
This commit is contained in:
tricopterY 2015-12-18 21:36:31 +11:00
parent c46fc423a7
commit 50f1269e0b
1 changed files with 2 additions and 2 deletions
Download patch file Download diff file Expand all files Collapse all files

4
_locales/en/messages.json
View file

@ -965,7 +965,7 @@
"message": "<strong>Motor Test Mode Notice:</strong><br />Moving the sliders will cause the motors to <strong>spin up</strong>.<br />In order to prevent injury <strong style=\"color: red\">remove ALL propellers</strong> before using this feature.<br />"
},
"motorsEnableControl": {
"message": "I understand the risks, propellors are removed - Enable motor control."
"message": "I understand the risks, propellers are removed - Enable motor control."
},
"sensorsInfo": {
@ -1199,7 +1199,7 @@
"message": "<strong>Recovery / Lost communication<strong>"
},
"firmwareFlasherRecoveryText": {
"message": "If you have lost comminication with your board follow these steps to restore communication: <ul><li>Power off</li><li>Enable 'No reboot sequence', enable 'Full chip erase'.</li><li>Jumper the BOOT pins or hold BOOT button.</li><li>Power on (activity LED will NOT flash if done correctly).</li><li>Release BOOT button if your FC has one.</li><li>Flash with correct firmware (using manual baud rate if specified in your FC's manual).</li><li>Power off.</li><li>Remove BOOT jumper.</li><li>Power on (activity LED should flash).</li><li>Connect normally.</li></ul>"
"message": "If you have lost communication with your board follow these steps to restore communication: <ul><li>Power off</li><li>Enable 'No reboot sequence', enable 'Full chip erase'.</li><li>Jumper the BOOT pins or hold BOOT button.</li><li>Power on (activity LED will NOT flash if done correctly).</li><li>Release BOOT button if your FC has one.</li><li>Flash with correct firmware (using manual baud rate if specified in your FC's manual).</li><li>Power off.</li><li>Remove BOOT jumper.</li><li>Power on (activity LED should flash).</li><li>Connect normally.</li></ul>"
},
"firmwareFlasherButtonLeave": {
"message": "Leave Firmware Flasher"