Miguel Angel Mulero Martinez
85e2472010
Move ESC_TELEMETRY to the ESC/Motor box
2019-09-05 09:21:09 +02:00
Kyle K
f7275c25f3
translate the (Legacy) bit, and only show it where needed
2019-09-05 04:15:22 +00:00
Kyle K
c46631d7a2
Ensure that loading message is provided.
2019-09-05 04:15:22 +00:00
Kyle K
16cabc93a4
initial go at flashing unified target with a config
2019-09-05 04:15:22 +00:00
Michael Keller
386c757e45
Removed Dshot1200 protocol. ( #1614 )
...
Removed Dshot1200 protocol.
2019-09-05 02:09:00 +12:00
Michael Keller
4e6076756e
refactor CSS references to Open Sans font ( #1613 )
...
refactor CSS references to Open Sans font
2019-09-05 01:55:31 +12:00
Bruce Luckcuck
d6a86dd3c3
Add visual indicator on mode when arming is disabled
...
If arming is disabled (at the firmware level) but the channel is withing the arming mode activation range, display the mode in red to indicate arming not available.
2019-09-04 07:44:25 -04:00
Michael Keller
7f1934b946
Merge pull request #1612 from McGiverGim/vtx_load_save
...
Add save/load buttons for the VTX Table
2019-09-04 23:30:16 +12:00
IvoFPV
26706f289a
Fix dmin on/off calculation and dmin limit
2019-09-04 12:42:40 +02:00
Miguel Angel Mulero Martinez
ca6b1f4e0e
Add save/load buttons for the VTX Table
2019-09-04 12:03:00 +02:00
IvoFPV
df79e2cb96
Fix vtx table inputs
2019-09-04 11:23:12 +02:00
Miguel Angel Mulero Martinez
a3042e39cc
Fix CSS button at the MSP TX window
2019-09-04 08:39:09 +02:00
IvoFPV
5b7d9bfa52
Add warning if SA port assigned and no Vtx Table
2019-09-03 19:35:08 +02:00
Michael Keller
054ab5e02a
Added 0 terminator to custom defaults before flashing. ( #1611 )
...
Added 0 terminator to custom defaults before flashing.
2019-09-04 01:11:09 +12:00
Michael Keller
4985e86ecc
Keep active subtab selected on PID Tuning tab, change displayed… ( #1610 )
...
Keep active subtab selected on PID Tuning tab, change displayed data …
2019-09-04 01:08:24 +12:00
mikeller
7e77e91597
Removed Dshot1200 protocol.
2019-09-03 23:00:20 +12:00
Kyle K
ae875339da
refactor CSS references to Open Sans font
...
The old way of using Open Sans was taking some browser quirk into consideration, instead of asking for the web font such as 'Open Sans' in bold, css would ask for a font called 'open_sansbold'
I also found two instances of 'regularbutton' class being defined for tabs, while the class is styled globally in main.css
This fixes a bug I caused where on Windows you can just ask for a bold version of a font, and it'll do it. macOS doesn't really do this properly, so the langauge selector was hard to see.
2019-09-03 08:03:25 +00:00
Michael Keller
cd7f305bef
Merge pull request #1605 from McGiverGim/msp_multiple_msp
...
Add MSP_MULTIPLE_MSP command
2019-09-02 22:52:23 +12:00
Miguel Angel Mulero Martinez
bb2334ca56
Add MSP_MULTIPLE_MSP command
2019-09-02 12:32:01 +02:00
Károly Kiripolszky
f1ce8075ad
keep active subtab selected on PID Tuning tab, change displayed data only
2019-09-02 11:25:36 +02:00
mikeller
2336f6bd6f
Added 0 terminator to custom defaults before flashing.
2019-09-02 20:55:51 +12:00
Michael Keller
f547d84eef
Gyro filtering restructure debug modes ( #1607 )
...
Gyro filtering restructure debug modes
2019-09-01 15:41:18 +12:00
Miguel Angel Mulero Martinez
0daa22d5ea
Gyro filtering restructure debug modes
2019-08-30 13:58:25 +02:00
Michael Keller
9d6f35c7f5
Change the tooltip attach method ( #1604 )
...
Change the tooltip attach method
2019-08-30 01:31:27 +12:00
Michael Keller
19106ae6cb
Merge pull request #1602 from McGiverGim/add_telem_info_motors
...
Add telemetry dshot data info to the motors tab
2019-08-30 01:19:01 +12:00
Miguel Angel Mulero Martinez
34f735e1e7
Change the tooltip attach method
2019-08-28 11:59:19 +02:00
Miguel Angel Mulero Martinez
b065c8f4f7
Add telemetry dshot data info to the motors tab
2019-08-28 11:50:47 +02:00
Michael Keller
a1349e6ac5
Merge pull request #1599 from IvoFPV/add-auto-smoothness-to-ui
...
Add rc smoothing auto smoothness to UI, fix refresh button and slowdown
2019-08-28 17:21:53 +12:00
Michael Keller
ed824563a1
Fixed structure of VTX tab Introduction string ( #1600 )
...
Fixed structure of VTX tab Introduction string
2019-08-28 12:08:11 +12:00
Leo Bottaro
67e11bb6e0
Fixed typo on vtxTablePowerLevelsTableHelp
...
County -> Country
2019-08-27 08:38:07 -03:00
Leo Bottaro
759265cf8f
Fixed structure of VTX tab Introduction string
...
From:
You can configure here the values for your Video *Trasmitter* (VTX). You can consult and configure the values of the transmission including the VTX Tables if the flight controller and the VTX support it
To:
Here you can configure the values for your Video Transmitter (VTX). You can view and change the transmission values, including the VTX Tables, if the flight controller and VTX support it
2019-08-26 16:54:20 -03:00
IvoFPV
c51217a585
Indentation, remove parsing
2019-08-26 10:36:33 +02:00
IvoFPV
70464f5ff2
Add rcsmoothing auto smoothness to UI
2019-08-25 20:06:09 +02:00
Michael Keller
e3e79f6e81
Merge pull request #1584 from IvoFPV/piduiov2
...
Improve PID Tuning tab style and layout
2019-08-25 13:44:10 +12:00
Michael Keller
1cefc1303a
Merge pull request #1595 from Docteh/sensors
...
reorder config requests on sensors tab
2019-08-25 11:12:31 +12:00
Michael Keller
c77fe48be9
Merge pull request #1582 from hydra/support-reboot-to-flash-bootloader
...
Replace legacy firmware reboot sequence with MSP based sequence.
2019-08-25 10:26:39 +12:00
Hydra
4c0e9f06e5
Replace legacy firmware reboot sequence with MSP based sequence.
...
This allows two things:
1. good user experience when flashing devices that use FLASH
bootloaders. previously users would have to use `bl flash` or enter
flash bootloader manually.
2. arbitrary setting of cli reboot character without breaking ability to
reboot flash via configurator.
Squashed commits:
* Extract MSPConnector from code in stm32.js to allow reuse.
* Use reboot_baud when connecting via MSP.
* Ensure GUI connect is unlocked after connect failures.
* Support legacy reboot method for old firmware.
* Don't treat MSPConnector as a singleton.
* Fix `port` usage in handlers.
* Add short delay after closing serial port before re-opening it again.
2019-08-24 22:11:35 +02:00
IvoFPV
34ca57fec2
Fix wrapping
2019-08-24 18:19:51 +02:00
IvoFPV
61d0b1e857
Dmin set per default ratio
2019-08-24 09:57:35 +02:00
IvoFPV
72b00c1d91
Add dmin note, remove spacer on wrap
2019-08-24 09:21:51 +02:00
IvoFPV
0c267265d4
Clean up css
2019-08-23 17:20:45 +02:00
Kyle K
715ca02a8b
reorder config requests on sensors tab
2019-08-23 05:58:42 +00:00
Michael Keller
1a1133903b
Ignore the l10n_master branch for CI purposes ( #1591 )
...
Ignore the l10n_master branch for CI purposes
2019-08-23 09:17:53 +12:00
Michael Keller
1b84527296
Added .nvmrc file to enable automatic node version selection wi… ( #1590 )
...
Added .nvmrc file to enable automatic node version selection with 'nvm'.
2019-08-23 01:38:48 +12:00
IvoFPV
b3a5865a65
Fix messages
2019-08-22 14:05:04 +02:00
IvoFPV
39a81a0728
Improve pid tuning tab style and layout
2019-08-22 12:17:22 +02:00
Kyle K
b547c8a85f
Ignore the l10n_master branch for CI purposes
...
https://docs.travis-ci.com/user/customizing-the-build/#building-specific-branches
Documentation says that the .travis.yml file needs to be present on all active branches of the project.
I don't know if that means we need to have this change in the branch for it to take effect.
Also exiting builds early if
2019-08-21 21:11:40 +00:00
mikeller
4cac52b3d3
Added .nvmrc file to enable automatic node version selection with 'nvm'.
2019-08-22 01:31:03 +12:00
Michael Keller
c3a492f9b8
Merge pull request #1589 from mikeller/require_node_10
...
Added requirement for node version 10.
2019-08-22 00:21:44 +12:00
Michael Keller
b60c57c135
Merge pull request #1585 from mikeller/add_unified_target_flashing
...
Added flashing of Unified Targets from configurations.
2019-08-21 23:09:02 +12:00
