Miguel Angel Mulero Martinez
2db22c9536
Add 10 and 25 gyro scales to motor tab
2019-09-12 16:51:30 +02:00
Miguel Angel Mulero Martinez
abb9997d1d
Add paste from clipboard option to VTX tab
2019-09-12 15:41:43 +02:00
Michael Keller
9442e9d940
Clean up and improve receiver tab style ( #1643 )
...
Clean up and improve receiver tab style
2019-09-12 07:44:36 +12:00
IvoFPV
073eeb0663
Fix vtx tab animation on init
2019-09-11 19:58:18 +02:00
IvoFPV
02a6610a99
Improve filter tuning tip
2019-09-11 10:04:36 +02:00
Michael Keller
62a0ba51a9
Further work: consider versions for unified targets ( #1626 )
...
Further work: consider versions for unified targets
2019-09-11 19:12:19 +12:00
Kyle K
000e537283
Finish up work on unified targets
2019-09-10 22:32:04 +00:00
IvoFPV
3c8fc20e1b
Clean up receiver tab
2019-09-10 16:08:46 +02:00
Michael Keller
d155ce035a
Fix rateprofiles not working after saving ( #1639 )
...
Fix rateprofiles not working after saving
2019-09-11 00:22:35 +12:00
Miguel Angel Mulero Martinez
d54b9d1045
Reorder and make more consistent the Motor/ESC Configuration box
2019-09-10 22:24:11 +12:00
Michael Keller
845155c8e2
Fixes clicking on helpicon affects input ( #1637 )
...
Fixes clicking on helpicon affects input
2019-09-10 20:54:16 +12:00
IvoFPV
cf112f8992
Remove clickable labels for switches
2019-09-09 22:11:53 +02:00
IvoFPV
69f3387a02
Fix rateprofiles
2019-09-09 14:41:40 +02:00
Michael Keller
68d076c714
Fixed duplication of 'gyro_to_use'. ( #1629 )
...
Fixed duplication of 'gyro_to_use'.
2019-09-09 01:09:11 +12:00
Miguel Angel Mulero Martinez
25fe13be25
Add RPM filter configuration
2019-09-07 15:35:45 +02:00
Michael Keller
fe08a7833e
Merge pull request #1598 from IvoFPV/addtuningsliders
...
Add tuning sliders
2019-09-07 23:11:36 +12:00
Michael Keller
78227fefd7
Merge pull request #1627 from IvoFPV/pid-tuning-tab-fix
...
Fix PID tuning tab active subtab
2019-09-07 23:07:20 +12:00
mikeller
7d6effca85
Fixed duplication of 'gyro_to_use'.
2019-09-07 23:06:50 +12:00
IvoFPV
35dd326778
Add tuning sliders
2019-09-07 13:00:39 +02:00
IvoFPV
faf4a26360
Fix pid tuning tab active subtab
2019-09-07 10:27:38 +02:00
Michael Keller
9c98bbfd79
Move ESC_SENSOR to the ESC/Motor box ( #1622 )
...
Move ESC_SENSOR to the ESC/Motor box
2019-09-07 12:35:03 +12:00
Michael Keller
19f3548fa7
Fix vtx table inputs not always responsive ( #1619 )
...
Fix vtx table inputs not always responsive
2019-09-07 12:32:48 +12:00
Michael Keller
633955e098
Merge pull request #1617 from IvoFPV/d-min-fix
...
Fix dmin on/off calculation and dmin limit
2019-09-07 12:30:38 +12:00
Michael Keller
9f63b994b9
Merge pull request #1616 from etracer65/mode_show_arming_disabled
...
Add visual indicator on ARM mode when arming is disabled by the firmware
2019-09-07 12:30:18 +12:00
Michael Keller
2ba51a8019
Merge pull request #1615 from IvoFPV/vtx-warning
...
Add warning if Smartaudio port assigned and VTX table not set up
2019-09-07 12:30:03 +12:00
Kyle K
59d9832efa
stop board selection from being dropped
2019-09-06 22:13:09 +00:00
Kyle K
f6934f234f
consider versions for unified targets
2019-09-06 10:05:29 +00:00
Kyle K
0c4e53e4aa
clean up, refactor a little
2019-09-06 01:38:37 +12:00
Miguel Angel Mulero Martinez
85e2472010
Move ESC_TELEMETRY to the ESC/Motor box
2019-09-05 09:21:09 +02:00
Kyle K
f7275c25f3
translate the (Legacy) bit, and only show it where needed
2019-09-05 04:15:22 +00:00
Kyle K
c46631d7a2
Ensure that loading message is provided.
2019-09-05 04:15:22 +00:00
Kyle K
16cabc93a4
initial go at flashing unified target with a config
2019-09-05 04:15:22 +00:00
Michael Keller
386c757e45
Removed Dshot1200 protocol. ( #1614 )
...
Removed Dshot1200 protocol.
2019-09-05 02:09:00 +12:00
Bruce Luckcuck
d6a86dd3c3
Add visual indicator on mode when arming is disabled
...
If arming is disabled (at the firmware level) but the channel is withing the arming mode activation range, display the mode in red to indicate arming not available.
2019-09-04 07:44:25 -04:00
Michael Keller
7f1934b946
Merge pull request #1612 from McGiverGim/vtx_load_save
...
Add save/load buttons for the VTX Table
2019-09-04 23:30:16 +12:00
IvoFPV
26706f289a
Fix dmin on/off calculation and dmin limit
2019-09-04 12:42:40 +02:00
Miguel Angel Mulero Martinez
ca6b1f4e0e
Add save/load buttons for the VTX Table
2019-09-04 12:03:00 +02:00
IvoFPV
df79e2cb96
Fix vtx table inputs
2019-09-04 11:23:12 +02:00
IvoFPV
5b7d9bfa52
Add warning if SA port assigned and no Vtx Table
2019-09-03 19:35:08 +02:00
Michael Keller
054ab5e02a
Added 0 terminator to custom defaults before flashing. ( #1611 )
...
Added 0 terminator to custom defaults before flashing.
2019-09-04 01:11:09 +12:00
Michael Keller
4985e86ecc
Keep active subtab selected on PID Tuning tab, change displayed… ( #1610 )
...
Keep active subtab selected on PID Tuning tab, change displayed data …
2019-09-04 01:08:24 +12:00
mikeller
7e77e91597
Removed Dshot1200 protocol.
2019-09-03 23:00:20 +12:00
Michael Keller
cd7f305bef
Merge pull request #1605 from McGiverGim/msp_multiple_msp
...
Add MSP_MULTIPLE_MSP command
2019-09-02 22:52:23 +12:00
Miguel Angel Mulero Martinez
bb2334ca56
Add MSP_MULTIPLE_MSP command
2019-09-02 12:32:01 +02:00
Károly Kiripolszky
f1ce8075ad
keep active subtab selected on PID Tuning tab, change displayed data only
2019-09-02 11:25:36 +02:00
mikeller
2336f6bd6f
Added 0 terminator to custom defaults before flashing.
2019-09-02 20:55:51 +12:00
Miguel Angel Mulero Martinez
0daa22d5ea
Gyro filtering restructure debug modes
2019-08-30 13:58:25 +02:00
Michael Keller
9d6f35c7f5
Change the tooltip attach method ( #1604 )
...
Change the tooltip attach method
2019-08-30 01:31:27 +12:00
Michael Keller
19106ae6cb
Merge pull request #1602 from McGiverGim/add_telem_info_motors
...
Add telemetry dshot data info to the motors tab
2019-08-30 01:19:01 +12:00
Miguel Angel Mulero Martinez
34f735e1e7
Change the tooltip attach method
2019-08-28 11:59:19 +02:00
