'use strict';

TABS.pid_tuning = {
    controllerChanged: false
};

TABS.pid_tuning.initialize = function (callback) {
    var self = this;
    if (GUI.active_tab != 'pid_tuning') {
        GUI.active_tab = 'pid_tuning';
    }

    // requesting MSP_STATUS manually because it contains CONFIG.profile
    MSP.promise(MSP_codes.MSP_STATUS).then(function() {
        if (GUI.canChangePidController) {
            return MSP.promise(MSP_codes.MSP_PID_CONTROLLER);
        }
        return true;
    }).then(function() {
        return MSP.promise(MSP_codes.MSP_PIDNAMES)
    }).then(function() {
        return MSP.promise(MSP_codes.MSP_PID);
    }).then(function() {
        return MSP.promise(MSP_codes.MSP_RC_TUNING);
    }).then(function() {
        return MSP.promise(MSP_codes.MSP_SPECIAL_PARAMETERS);
    }).then(function() {
        return MSP.promise(MSP_codes.MSP_ADVANCED_TUNING);
    }).then(function() {
        return MSP.promise(MSP_codes.MSP_FILTER_CONFIG);
    }).then(function() {
        $('#content').load("./tabs/pid_tuning.html", process_html);
    });

    function pid_and_rc_to_form() {
        // Fill in the data from PIDs array
        var i = 0;
        $('.pid_tuning .ROLL input').each(function () {
            switch (i) {
                case 0:
                    $(this).val(PIDs[0][i++]);
                    break;
                case 1:
                    $(this).val(PIDs[0][i++]);
                    break;
                case 2:
                    $(this).val(PIDs[0][i++]);
                    break;
            }
        });

        i = 0;
        $('.pid_tuning .PITCH input').each(function () {
            switch (i) {
                case 0:
                    $(this).val(PIDs[1][i++]);
                    break;
                case 1:
                    $(this).val(PIDs[1][i++]);
                    break;
                case 2:
                    $(this).val(PIDs[1][i++]);
                    break;
            }
        });

        i = 0;
        $('.pid_tuning .YAW input').each(function () {
            switch (i) {
                case 0:
                    $(this).val(PIDs[2][i++]);
                    break;
                case 1:
                    $(this).val(PIDs[2][i++]);
                    break;
                case 2:
                    $(this).val(PIDs[2][i++]);
                    break;
            }
        });

        i = 0;
        $('.pid_tuning .ALT input').each(function () {
            switch (i) {
                case 0:
                    $(this).val(PIDs[3][i++]);
                    break;
                case 1:
                    $(this).val(PIDs[3][i++]);
                    break;
                case 2:
                    $(this).val(PIDs[3][i++]);
                    break;
            }
        });

        i = 0;
        $('.pid_tuning .Pos input').each(function () {
            $(this).val(PIDs[4][i++]);
        });

        i = 0;
        $('.pid_tuning .PosR input').each(function () {
            switch (i) {
                case 0:
                    $(this).val(PIDs[5][i++]);
                    break;
                case 1:
                    $(this).val(PIDs[5][i++]);
                    break;
                case 2:
                    $(this).val(PIDs[5][i++]);
                    break;
            }
        });

        i = 0;
        $('.pid_tuning .NavR input').each(function () {
            switch (i) {
                case 0:
                    $(this).val(PIDs[6][i++]);
                    break;
                case 1:
                    $(this).val(PIDs[6][i++]);
                    break;
                case 2:
                    $(this).val(PIDs[6][i++]);
                    break;
            }
        });

        i = 0;
        $('.pid_tuning .LEVEL input').each(function () {
            switch (i) {
                case 0:
                    $(this).val(PIDs[7][i++]);
                    break;
                case 1:
                    $(this).val(PIDs[7][i++]);
                    break;
                case 2:
                    $(this).val(PIDs[7][i++]);
                    break;
            }
        });

        i = 0;
        $('.pid_tuning .MAG input').each(function () {
            $(this).val(PIDs[8][i++]);
        });

        i = 0;
        $('.pid_tuning .Vario input').each(function () {
            switch (i) {
                case 0:
                    $(this).val(PIDs[9][i++]);
                    break;
                case 1:
                    $(this).val(PIDs[9][i++]);
                    break;
                case 2:
                    $(this).val(PIDs[9][i++]);
                    break;
            }
        });

        // Fill in data from RC_tuning object
        $('.pid_tuning input[name="rc_rate"]').val(RC_tuning.RC_RATE.toFixed(2));
        $('.pid_tuning input[name="roll_pitch_rate"]').val(RC_tuning.roll_pitch_rate.toFixed(2));
        $('.pid_tuning input[name="roll_rate"]').val(RC_tuning.roll_rate.toFixed(2));
        $('.pid_tuning input[name="pitch_rate"]').val(RC_tuning.pitch_rate.toFixed(2));
        $('.pid_tuning input[name="yaw_rate"]').val(RC_tuning.yaw_rate.toFixed(2));
        $('.pid_tuning input[name="rc_expo"]').val(RC_tuning.RC_EXPO.toFixed(2));
        $('.pid_tuning input[name="rc_yaw_expo"]').val(RC_tuning.RC_YAW_EXPO.toFixed(2));
        $('.pid_tuning input[name="rc_rate_yaw"]').val(SPECIAL_PARAMETERS.RC_RATE_YAW.toFixed(2));

        $('.tpa input[name="tpa"]').val(RC_tuning.dynamic_THR_PID.toFixed(2));
        $('.tpa input[name="tpa-breakpoint"]').val(RC_tuning.dynamic_THR_breakpoint);

        if (semver.lt(CONFIG.apiVersion, "1.10.0")) {
            $('.pid_tuning input[name="rc_yaw_expo"]').hide();
            $('.pid_tuning input[name="rc_expo"]').attr("rowspan", "3");
        }

        $('.pid_filter .gyro').val(FILTER_CONFIG.gyro_soft_lpf_hz);
        $('.pid_filter .dterm').val(FILTER_CONFIG.dterm_lpf_hz);
        $('.pid_filter .yaw').val(FILTER_CONFIG.yaw_lpf_hz);

        if (CONFIG.flightControllerIdentifier == "BTFL" && semver.lt(CONFIG.flightControllerVersion, "2.8.1")) {
            $('.pid_filter').hide();
            $('.pid_tuning input[name="rc_rate_yaw"]').hide();
        }
    }

    function form_to_pid_and_rc() {
        // Catch all the changes and stuff the inside PIDs array
        var i = 0;
        $('table.pid_tuning tr.ROLL input').each(function () {
            PIDs[0][i++] = parseFloat($(this).val());
        });

        i = 0;
        $('table.pid_tuning tr.PITCH input').each(function () {
            PIDs[1][i++] = parseFloat($(this).val());
        });

        i = 0;
        $('table.pid_tuning tr.YAW input').each(function () {
            PIDs[2][i++] = parseFloat($(this).val());
        });

        i = 0;
        $('table.pid_tuning tr.ALT input').each(function () {
            PIDs[3][i++] = parseFloat($(this).val());
        });

        i = 0;
        $('table.pid_tuning tr.Vario input').each(function () {
            PIDs[9][i++] = parseFloat($(this).val());
        });

        i = 0;
        $('table.pid_tuning tr.Pos input').each(function () {
            PIDs[4][i++] = parseFloat($(this).val());
        });

        i = 0;
        $('table.pid_tuning tr.PosR input').each(function () {
            PIDs[5][i++] = parseFloat($(this).val());
        });

        i = 0;
        $('table.pid_tuning tr.NavR input').each(function () {
            PIDs[6][i++] = parseFloat($(this).val());
        });

        i = 0;
        $('table.pid_tuning tr.LEVEL input').each(function () {
            PIDs[7][i++] = parseFloat($(this).val());
        });

        i = 0;
        $('table.pid_tuning tr.MAG input').each(function () {
            PIDs[8][i++] = parseFloat($(this).val());
        });

        // catch RC_tuning changes
        RC_tuning.RC_RATE = parseFloat($('.pid_tuning input[name="rc_rate"]').val());
        RC_tuning.roll_pitch_rate = parseFloat($('.pid_tuning input[name="roll_pitch_rate"]').val());
        RC_tuning.roll_rate = parseFloat($('.pid_tuning input[name="roll_rate"]').val());
        RC_tuning.pitch_rate = parseFloat($('.pid_tuning input[name="pitch_rate"]').val());
        RC_tuning.yaw_rate = parseFloat($('.pid_tuning input[name="yaw_rate"]').val());
        RC_tuning.RC_EXPO = parseFloat($('.pid_tuning input[name="rc_expo"]').val());
        RC_tuning.RC_YAW_EXPO = parseFloat($('.pid_tuning input[name="rc_yaw_expo"]').val());
        SPECIAL_PARAMETERS.RC_RATE_YAW = parseFloat($('.pid_tuning input[name="rc_rate_yaw"]').val());

        RC_tuning.dynamic_THR_PID = parseFloat($('.tpa input[name="tpa"]').val());
        RC_tuning.dynamic_THR_breakpoint = parseInt($('.tpa input[name="tpa-breakpoint"]').val());
        FILTER_CONFIG.gyro_soft_lpf_hz = parseInt($('.pid_filter .gyro').val());
        FILTER_CONFIG.dterm_lpf_hz = parseInt($('.pid_filter .dterm').val());
        FILTER_CONFIG.yaw_lpf_hz = parseInt($('.pid_filter .yaw').val());
    }
    function hideUnusedPids(sensors_detected) {
      $('.tab-pid_tuning table.pid_tuning').hide();
      $('#pid_main').show();

      if (have_sensor(sensors_detected, 'acc')) {
        $('#pid_accel').show();
      }
      if (have_sensor(sensors_detected, 'baro')) {
        $('#pid_baro').show();
      }
      if (have_sensor(sensors_detected, 'mag')) {
        $('#pid_mag').show();
      }
      if (bit_check(BF_CONFIG.features, 7)) {   //This will need to be reworked to remove BF_CONFIG reference eventually
        $('#pid_gps').show();
      }
      if (have_sensor(sensors_detected, 'sonar')) {
        $('#pid_baro').show();
      }
    }
    function process_html() {
        // translate to user-selected language
        localize();

        hideUnusedPids(CONFIG.activeSensors);

        $('#showAllPids').on('click', function(){
          if($(this).text() == "Show all PIDs") {
            $('.tab-pid_tuning table.pid_tuning').show();
            $(this).text('Hide unused PIDs');
          } else {
            hideUnusedPids(CONFIG.activeSensors);
            $(this).text('Show all PIDs');
          }
        });

        $('#resetPIDs').on('click', function(){
          MSP.send_message(MSP_codes.MSP_SET_RESET_CURR_PID, false, false, false);
          updateActivatedTab();
        });

        $('.pid_tuning tr').each(function(){
          for(i = 0; i < PID_names.length; i++) {
            if($(this).hasClass(PID_names[i])) {
              $(this).find('td:first').text(PID_names[i]);
            }
          }
        });


        pid_and_rc_to_form();

        var pidController_e = $('select[name="controller"]');


        var pidControllerList;

        if (semver.lt(CONFIG.apiVersion, "1.14.0")) {
            pidControllerList = [
                { name: "MultiWii (Old)"},
                { name: "MultiWii (rewrite)"},
                { name: "LuxFloat"},
                { name: "MultiWii (2.3 - latest)"},
                { name: "MultiWii (2.3 - hybrid)"},
                { name: "Harakiri"}
            ]
        } else {
            pidControllerList = [
                { name: ""},
                { name: "Integer"},
                { name: "Float"},
            ]
        }
        
        for (var i = 0; i < pidControllerList.length; i++) {
            pidController_e.append('<option value="' + (i) + '">' + pidControllerList[i].name + '</option>');
        }
       
        
        var form_e = $('#pid-tuning');

        if (GUI.canChangePidController) {
            pidController_e.val(PID.controller);
        } else {
            GUI.log(chrome.i18n.getMessage('pidTuningUpgradeFirmwareToChangePidController', [CONFIG.apiVersion, CONFIGURATOR.pidControllerChangeMinApiVersion]));

            pidController_e.empty();
            pidController_e.append('<option value="">Unknown</option>');

            pidController_e.prop('disabled', true);
        }

        if (semver.lt(CONFIG.apiVersion, "1.7.0")) {
            $('.tpa .tpa-breakpoint').hide();

            $('.pid_tuning .roll_rate').hide();
            $('.pid_tuning .pitch_rate').hide();
        } else {
            $('.pid_tuning .roll_pitch_rate').hide();
        }

        function drawRateCurve(rateElement, expoElement, canvasElement) {
            var rate = parseFloat(rateElement.val()),
                expo = parseFloat(expoElement.val()),
                context = canvasElement.getContext("2d");

            // local validation to deal with input event
            if (rate >= parseFloat(rateElement.prop('min')) &&
                rate <= parseFloat(rateElement.prop('max')) &&
                expo >= parseFloat(expoElement.prop('min')) &&
                expo <= parseFloat(expoElement.prop('max'))) {

                var rateHeight = canvasElement.height;
                var rateWidth = canvasElement.width;

                // math magic by englishman
                var ratey = rateHeight * rate;

                // draw
                context.clearRect(0, 0, rateWidth, rateHeight);
                context.beginPath();
                context.moveTo(0, rateHeight);
                context.quadraticCurveTo(rateWidth * 11 / 20, rateHeight - ((ratey / 2) * (1 - expo)), rateWidth, rateHeight - ratey);
                context.lineWidth = 2;
                context.strokeStyle = '#ffbb00';
                context.stroke();
            }
        }

        // UI Hooks
        // curves
        $('.pid_tuning').on('input change', function () {
            setTimeout(function () { // let global validation trigger and adjust the values first
                var rateElement = $('.pid_tuning input[name="rc_rate"]'),
                    expoElement = $('.pid_tuning input[name="rc_expo"]'),
                    yawExpoElement = $('.pid_tuning input[name="rc_yaw_expo"]'),
                    rcCurveElement = $('.pitch_roll_curve canvas').get(0),
                    rcYawCurveElement = $('.yaw_curve canvas').get(0);

                    drawRateCurve(rateElement, expoElement, rcCurveElement);
                    drawRateCurve(rateElement, yawExpoElement, rcYawCurveElement);
            }, 0);
        }).trigger('input');

        $('a.refresh').click(function () {
            GUI.tab_switch_cleanup(function () {
                GUI.log(chrome.i18n.getMessage('pidTuningDataRefreshed'));
                TABS.pid_tuning.initialize();
            });
        });

        form_e.find('input').each(function (k, item) {
            $(item).change(function () {
                pidController_e.prop("disabled", true);
                TABS.pid_tuning.controllerChanged = false;
            })
        });

        pidController_e.change(function () {
            if (PID.controller != pidController_e.val()) {
                form_e.find('input').each(function (k, item) {
                    $(item).prop('disabled', true);
                    TABS.pid_tuning.controllerChanged = true;
                });
            }
        });

        $('.delta select').val(ADVANCED_TUNING.deltaMethod).change(function() {
            ADVANCED_TUNING.deltaMethod = $(this).val();
        });

        if (CONFIG.flightControllerIdentifier == "BTFL" && semver.lt(CONFIG.flightControllerVersion, "2.8.2")) {
            $('.delta').hide();
        }

        // update == save.
        $('a.update').click(function () {
            form_to_pid_and_rc();
            if (GUI.canChangePidController && TABS.pid_tuning.controllerChanged) {
                PID.controller = pidController_e.val();
                MSP.send_message(MSP_codes.MSP_SET_PID_CONTROLLER, MSP.crunch(MSP_codes.MSP_SET_PID_CONTROLLER), false, function () {
                    MSP.send_message(MSP_codes.MSP_EEPROM_WRITE, false, false, function () {
                        GUI.log(chrome.i18n.getMessage('pidTuningEepromSaved'));
                    });
                    TABS.pid_tuning.initialize();
                });
            } else {
                if (TABS.pid_tuning.controllerChanged) { return; }
                MSP.promise(MSP_codes.MSP_SET_PID, MSP.crunch(MSP_codes.MSP_SET_PID)).then(function() {
                    if (TABS.pid_tuning.controllerChanged) { Promise.reject('pid controller changed'); }
                    if (CONFIG.flightControllerIdentifier == "BTFL" && semver.gte(CONFIG.flightControllerVersion, "2.8.1")) {
                        return MSP.promise(MSP_codes.MSP_SET_SPECIAL_PARAMETERS, MSP.crunch(MSP_codes.MSP_SET_SPECIAL_PARAMETERS));
                    }
                }).then(function() {
                    if (TABS.pid_tuning.controllerChanged) { Promise.reject('pid controller changed'); }
                    return MSP.promise(MSP_codes.MSP_SET_ADVANCED_TUNING, MSP.crunch(MSP_codes.MSP_SET_ADVANCED_TUNING));
                }).then(function() {
                    if (TABS.pid_tuning.controllerChanged) { Promise.reject('pid controller changed'); }
                    if (CONFIG.flightControllerIdentifier == "BTFL" && semver.gte(CONFIG.flightControllerVersion, "2.8.1")) {
                        return MSP.promise(MSP_codes.MSP_SET_FILTER_CONFIG, MSP.crunch(MSP_codes.MSP_SET_FILTER_CONFIG));
                    }
                }).then(function() {
                    return MSP.promise(MSP_codes.MSP_SET_RC_TUNING, MSP.crunch(MSP_codes.MSP_SET_RC_TUNING));
                }).then(function() {
                    return MSP.promise(MSP_codes.MSP_EEPROM_WRITE);
                }).then(function() {
                    GUI.log(chrome.i18n.getMessage('pidTuningEepromSaved'));
                });
            }
        });

        // status data pulled via separate timer with static speed
        GUI.interval_add('status_pull', function status_pull() {
            MSP.send_message(MSP_codes.MSP_STATUS);
        }, 250, true);

        GUI.content_ready(callback);
    }
};

TABS.pid_tuning.cleanup = function (callback) {
    if (callback) {
        callback();
    }
};