mirror of
https://github.com/betaflight/betaflight.git
synced 2025-07-24 08:45:36 +03:00
PICO: Adding tinyUSB library
This commit is contained in:
blckmn
parent
1774693395
commit
0109f50909
1507 changed files with 299535 additions and 0 deletions
236
lib/main/tinyUSB/hw/bsp/lpc54/family.c
Normal file
236
lib/main/tinyUSB/hw/bsp/lpc54/family.c
Normal file
|
|
@ -0,0 +1,236 @@
|
|||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2018, hathach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#include "fsl_device_registers.h"
|
||||
#include "fsl_gpio.h"
|
||||
#include "fsl_power.h"
|
||||
#include "fsl_iocon.h"
|
||||
#include "fsl_usart.h"
|
||||
|
||||
#include "bsp/board_api.h"
|
||||
#include "board.h"
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// MACRO TYPEDEF CONSTANT ENUM
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
// IOCON pin mux
|
||||
#define IOCON_PIO_DIGITAL_EN 0x80u // Enables digital function
|
||||
#define IOCON_PIO_FUNC0 0x00u
|
||||
#define IOCON_PIO_FUNC1 0x01u // Selects pin function 1
|
||||
#define IOCON_PIO_FUNC7 0x07u // Selects pin function 7
|
||||
#define IOCON_PIO_INPFILT_OFF 0x0100u // Input filter disabled
|
||||
#define IOCON_PIO_INV_DI 0x00u // Input function is not inverted
|
||||
#define IOCON_PIO_MODE_INACT 0x00u // No addition pin function
|
||||
#define IOCON_PIO_MODE_PULLUP 0x10u
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u // Open drain is disabled
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u // Standard mode, output slew rate control is enabled
|
||||
|
||||
// Digital pin function n enabled
|
||||
#define IOCON_PIO_DIG_FUNC0_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_INPFILT_OFF | IOCON_PIO_FUNC0)
|
||||
#define IOCON_PIO_DIG_FUNC1_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_INPFILT_OFF | IOCON_PIO_FUNC1)
|
||||
#define IOCON_PIO_DIG_FUNC4_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_INPFILT_OFF | IOCON_PIO_FUNC4)
|
||||
#define IOCON_PIO_DIG_FUNC7_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_INPFILT_OFF | IOCON_PIO_FUNC7)
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Forward USB interrupt events to TinyUSB IRQ Handler
|
||||
//--------------------------------------------------------------------+
|
||||
void USB0_IRQHandler(void) {
|
||||
tusb_int_handler(0, true);
|
||||
}
|
||||
|
||||
void USB1_IRQHandler(void) {
|
||||
tusb_int_handler(1, true);
|
||||
}
|
||||
|
||||
/****************************************************************
|
||||
name: BOARD_BootClockFROHF96M
|
||||
outputs:
|
||||
- {id: SYSTICK_clock.outFreq, value: 96 MHz}
|
||||
- {id: System_clock.outFreq, value: 96 MHz}
|
||||
settings:
|
||||
- {id: SYSCON.MAINCLKSELA.sel, value: SYSCON.fro_hf}
|
||||
sources:
|
||||
- {id: SYSCON.fro_hf.outFreq, value: 96 MHz}
|
||||
******************************************************************/
|
||||
void BootClockFROHF96M(void) {
|
||||
/*!< Set up the clock sources */
|
||||
/*!< Set up FRO */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_FRO_EN); /*!< Ensure FRO is on */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change voltage without
|
||||
accidentally being below the voltage for current speed */
|
||||
POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
|
||||
CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */
|
||||
|
||||
CLOCK_SetupFROClocking(96000000U); /*!< Set up high frequency FRO output to selected frequency */
|
||||
|
||||
/*!< Set up dividers */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
|
||||
|
||||
/*!< Set up clock selectors - Attach clocks to the peripheries */
|
||||
CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */
|
||||
|
||||
/*!< Set SystemCoreClock variable. */
|
||||
SystemCoreClock = 96000000U;
|
||||
}
|
||||
|
||||
void board_init(void) {
|
||||
// Enable IOCON clock
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
// Init 96 MHz clock
|
||||
BootClockFROHF96M();
|
||||
|
||||
// 1ms tick timer
|
||||
SysTick_Config(SystemCoreClock / 1000);
|
||||
|
||||
#if CFG_TUSB_OS == OPT_OS_FREERTOS
|
||||
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
|
||||
NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
|
||||
#endif
|
||||
|
||||
// Init all GPIO ports 54114 only has 2 ports.
|
||||
GPIO_PortInit(GPIO, LED_PORT);
|
||||
GPIO_PortInit(GPIO, BUTTON_PORT);
|
||||
|
||||
// LED
|
||||
IOCON_PinMuxSet(IOCON, LED_PORT, LED_PIN, IOCON_PIO_DIG_FUNC0_EN);
|
||||
gpio_pin_config_t const led_config = { kGPIO_DigitalOutput, 0};
|
||||
GPIO_PinInit(GPIO, LED_PORT, LED_PIN, &led_config);
|
||||
|
||||
board_led_write(0);
|
||||
|
||||
// Button
|
||||
IOCON_PinMuxSet(IOCON, BUTTON_PORT, BUTTON_PIN, IOCON_PIO_DIG_FUNC0_EN | IOCON_PIO_MODE_PULLUP);
|
||||
gpio_pin_config_t const button_config = { kGPIO_DigitalInput, 0};
|
||||
GPIO_PinInit(GPIO, BUTTON_PORT, BUTTON_PIN, &button_config);
|
||||
|
||||
#ifdef UART_DEV
|
||||
// UART
|
||||
IOCON_PinMuxSet(IOCON, UART_RX_PINMUX);
|
||||
IOCON_PinMuxSet(IOCON, UART_TX_PINMUX);
|
||||
|
||||
// Enable UART when debug log is on
|
||||
CLOCK_AttachClk(kFRO12M_to_FLEXCOMM0);
|
||||
usart_config_t uart_config;
|
||||
USART_GetDefaultConfig(&uart_config);
|
||||
uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE;
|
||||
uart_config.enableTx = true;
|
||||
uart_config.enableRx = true;
|
||||
USART_Init(UART_DEV, &uart_config, 12000000);
|
||||
#endif
|
||||
|
||||
// USB
|
||||
IOCON_PinMuxSet(IOCON, USB0_VBUS_PINMUX);
|
||||
|
||||
#if defined(FSL_FEATURE_SOC_USBHSD_COUNT) && FSL_FEATURE_SOC_USBHSD_COUNT
|
||||
// LPC546xx and LPC540xx has OTG 1 FS + 1 HS rhports
|
||||
#if defined(BOARD_TUD_RHPORT) && BOARD_TUD_RHPORT == 0
|
||||
// Port0 is Full Speed
|
||||
POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); /*< Turn on USB Phy */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 1, false);
|
||||
CLOCK_AttachClk(kFRO_HF_to_USB0_CLK);
|
||||
|
||||
/*According to reference manual, device mode setting has to be set by access usb host register */
|
||||
CLOCK_EnableClock(kCLOCK_Usbhsl0); /* enable usb0 host clock */
|
||||
USBFSH->PORTMODE |= USBFSH_PORTMODE_DEV_ENABLE_MASK;
|
||||
CLOCK_DisableClock(kCLOCK_Usbhsl0); /* disable usb0 host clock */
|
||||
|
||||
CLOCK_EnableUsbfs0DeviceClock(kCLOCK_UsbSrcFro, CLOCK_GetFroHfFreq());
|
||||
#endif
|
||||
|
||||
#if defined(BOARD_TUD_RHPORT) && BOARD_TUD_RHPORT == 1
|
||||
// Port1 is High Speed
|
||||
POWER_DisablePD(kPDRUNCFG_PD_USB1_PHY);
|
||||
|
||||
/*According to reference manual, device mode setting has to be set by access usb host register */
|
||||
CLOCK_EnableClock(kCLOCK_Usbh1); /* enable usb1 host clock */
|
||||
USBHSH->PORTMODE |= USBHSH_PORTMODE_DEV_ENABLE_MASK;
|
||||
CLOCK_DisableClock(kCLOCK_Usbh1); /* enable usb1 host clock */
|
||||
|
||||
CLOCK_EnableUsbhs0DeviceClock(kCLOCK_UsbSrcUsbPll, 0U);
|
||||
#endif
|
||||
#else
|
||||
// LPC5411x series only has full speed device
|
||||
POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); // Turn on USB Phy
|
||||
CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); /* enable USB IP clock */
|
||||
#endif
|
||||
}
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Board porting API
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
void board_led_write(bool state) {
|
||||
GPIO_PinWrite(GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON));
|
||||
}
|
||||
|
||||
uint32_t board_button_read(void) {
|
||||
// active low
|
||||
return BUTTON_STATE_ACTIVE == GPIO_PinRead(GPIO, BUTTON_PORT, BUTTON_PIN);
|
||||
}
|
||||
|
||||
int board_uart_read(uint8_t* buf, int len) {
|
||||
(void) buf;
|
||||
(void) len;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_uart_write(void const* buf, int len) {
|
||||
USART_WriteBlocking(UART_DEV, (uint8_t const*) buf, len);
|
||||
return 0;
|
||||
}
|
||||
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
volatile uint32_t system_ticks = 0;
|
||||
|
||||
void SysTick_Handler(void) {
|
||||
system_ticks++;
|
||||
}
|
||||
|
||||
uint32_t board_millis(void) {
|
||||
return system_ticks;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#ifndef __ICCARM__
|
||||
// Implement _start() since we use linker flag '-nostartfiles'.
|
||||
// Requires defined __STARTUP_CLEAR_BSS,
|
||||
extern int main(void);
|
||||
TU_ATTR_UNUSED void _start(void) {
|
||||
// called by startup code
|
||||
main();
|
||||
while (1) {}
|
||||
}
|
||||
|
||||
#ifdef __clang__
|
||||
void _exit (int __status) {
|
||||
while (1) {}
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
Loading…
Add table
Add a link
Reference in a new issue