mirror of
https://github.com/betaflight/betaflight.git
synced 2025-07-25 01:05:27 +03:00
Add VCP driver (work in progress)
This commit is contained in:
parent
294f09bc91
commit
3f8a6c0e20
39 changed files with 6912 additions and 7 deletions
259
lib/main/STM32_USB-FS-Device_Driver/inc/usb_core.h
Normal file
259
lib/main/STM32_USB-FS-Device_Driver/inc/usb_core.h
Normal file
|
@ -0,0 +1,259 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file usb_core.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief Standard protocol processing functions prototypes
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USB_CORE_H
|
||||
#define __USB_CORE_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
typedef enum _CONTROL_STATE
|
||||
{
|
||||
WAIT_SETUP, /* 0 */
|
||||
SETTING_UP, /* 1 */
|
||||
IN_DATA, /* 2 */
|
||||
OUT_DATA, /* 3 */
|
||||
LAST_IN_DATA, /* 4 */
|
||||
LAST_OUT_DATA, /* 5 */
|
||||
WAIT_STATUS_IN, /* 7 */
|
||||
WAIT_STATUS_OUT, /* 8 */
|
||||
STALLED, /* 9 */
|
||||
PAUSE /* 10 */
|
||||
} CONTROL_STATE; /* The state machine states of a control pipe */
|
||||
|
||||
typedef struct OneDescriptor
|
||||
{
|
||||
uint8_t *Descriptor;
|
||||
uint16_t Descriptor_Size;
|
||||
}
|
||||
ONE_DESCRIPTOR, *PONE_DESCRIPTOR;
|
||||
/* All the request process routines return a value of this type
|
||||
If the return value is not SUCCESS or NOT_READY,
|
||||
the software will STALL the correspond endpoint */
|
||||
typedef enum _RESULT
|
||||
{
|
||||
USB_SUCCESS = 0, /* Process successfully */
|
||||
USB_ERROR,
|
||||
USB_UNSUPPORT,
|
||||
USB_NOT_READY /* The process has not been finished, endpoint will be
|
||||
NAK to further request */
|
||||
} RESULT;
|
||||
|
||||
|
||||
/*-*-*-*-*-*-*-*-*-*-* Definitions for endpoint level -*-*-*-*-*-*-*-*-*-*-*-*/
|
||||
typedef struct _ENDPOINT_INFO
|
||||
{
|
||||
/* When send data out of the device,
|
||||
CopyData() is used to get data buffer 'Length' bytes data
|
||||
if Length is 0,
|
||||
CopyData() returns the total length of the data
|
||||
if the request is not supported, returns 0
|
||||
(NEW Feature )
|
||||
if CopyData() returns -1, the calling routine should not proceed
|
||||
further and will resume the SETUP process by the class device
|
||||
if Length is not 0,
|
||||
CopyData() returns a pointer to indicate the data location
|
||||
Usb_wLength is the data remain to be sent,
|
||||
Usb_wOffset is the Offset of original data
|
||||
When receive data from the host,
|
||||
CopyData() is used to get user data buffer which is capable
|
||||
of Length bytes data to copy data from the endpoint buffer.
|
||||
if Length is 0,
|
||||
CopyData() returns the available data length,
|
||||
if Length is not 0,
|
||||
CopyData() returns user buffer address
|
||||
Usb_rLength is the data remain to be received,
|
||||
Usb_rPointer is the Offset of data buffer
|
||||
*/
|
||||
uint16_t Usb_wLength;
|
||||
uint16_t Usb_wOffset;
|
||||
uint16_t PacketSize;
|
||||
uint8_t *(*CopyData)(uint16_t Length);
|
||||
}ENDPOINT_INFO;
|
||||
|
||||
/*-*-*-*-*-*-*-*-*-*-*-* Definitions for device level -*-*-*-*-*-*-*-*-*-*-*-*/
|
||||
|
||||
typedef struct _DEVICE
|
||||
{
|
||||
uint8_t Total_Endpoint; /* Number of endpoints that are used */
|
||||
uint8_t Total_Configuration;/* Number of configuration available */
|
||||
}
|
||||
DEVICE;
|
||||
|
||||
typedef union
|
||||
{
|
||||
uint16_t w;
|
||||
struct BW
|
||||
{
|
||||
uint8_t bb1;
|
||||
uint8_t bb0;
|
||||
}
|
||||
bw;
|
||||
} uint16_t_uint8_t;
|
||||
|
||||
typedef struct _DEVICE_INFO
|
||||
{
|
||||
uint8_t USBbmRequestType; /* bmRequestType */
|
||||
uint8_t USBbRequest; /* bRequest */
|
||||
uint16_t_uint8_t USBwValues; /* wValue */
|
||||
uint16_t_uint8_t USBwIndexs; /* wIndex */
|
||||
uint16_t_uint8_t USBwLengths; /* wLength */
|
||||
|
||||
uint8_t ControlState; /* of type CONTROL_STATE */
|
||||
uint8_t Current_Feature;
|
||||
uint8_t Current_Configuration; /* Selected configuration */
|
||||
uint8_t Current_Interface; /* Selected interface of current configuration */
|
||||
uint8_t Current_AlternateSetting;/* Selected Alternate Setting of current
|
||||
interface*/
|
||||
|
||||
ENDPOINT_INFO Ctrl_Info;
|
||||
}DEVICE_INFO;
|
||||
|
||||
typedef struct _DEVICE_PROP
|
||||
{
|
||||
void (*Init)(void); /* Initialize the device */
|
||||
void (*Reset)(void); /* Reset routine of this device */
|
||||
|
||||
/* Device dependent process after the status stage */
|
||||
void (*Process_Status_IN)(void);
|
||||
void (*Process_Status_OUT)(void);
|
||||
|
||||
/* Procedure of process on setup stage of a class specified request with data stage */
|
||||
/* All class specified requests with data stage are processed in Class_Data_Setup
|
||||
Class_Data_Setup()
|
||||
responses to check all special requests and fills ENDPOINT_INFO
|
||||
according to the request
|
||||
If IN tokens are expected, then wLength & wOffset will be filled
|
||||
with the total transferring bytes and the starting position
|
||||
If OUT tokens are expected, then rLength & rOffset will be filled
|
||||
with the total expected bytes and the starting position in the buffer
|
||||
|
||||
If the request is valid, Class_Data_Setup returns SUCCESS, else UNSUPPORT
|
||||
|
||||
CAUTION:
|
||||
Since GET_CONFIGURATION & GET_INTERFACE are highly related to
|
||||
the individual classes, they will be checked and processed here.
|
||||
*/
|
||||
RESULT (*Class_Data_Setup)(uint8_t RequestNo);
|
||||
|
||||
/* Procedure of process on setup stage of a class specified request without data stage */
|
||||
/* All class specified requests without data stage are processed in Class_NoData_Setup
|
||||
Class_NoData_Setup
|
||||
responses to check all special requests and perform the request
|
||||
|
||||
CAUTION:
|
||||
Since SET_CONFIGURATION & SET_INTERFACE are highly related to
|
||||
the individual classes, they will be checked and processed here.
|
||||
*/
|
||||
RESULT (*Class_NoData_Setup)(uint8_t RequestNo);
|
||||
|
||||
/*Class_Get_Interface_Setting
|
||||
This function is used by the file usb_core.c to test if the selected Interface
|
||||
and Alternate Setting (uint8_t Interface, uint8_t AlternateSetting) are supported by
|
||||
the application.
|
||||
This function is writing by user. It should return "SUCCESS" if the Interface
|
||||
and Alternate Setting are supported by the application or "UNSUPPORT" if they
|
||||
are not supported. */
|
||||
|
||||
RESULT (*Class_Get_Interface_Setting)(uint8_t Interface, uint8_t AlternateSetting);
|
||||
|
||||
uint8_t* (*GetDeviceDescriptor)(uint16_t Length);
|
||||
uint8_t* (*GetConfigDescriptor)(uint16_t Length);
|
||||
uint8_t* (*GetStringDescriptor)(uint16_t Length);
|
||||
|
||||
/* This field is not used in current library version. It is kept only for
|
||||
compatibility with previous versions */
|
||||
void* RxEP_buffer;
|
||||
|
||||
uint8_t MaxPacketSize;
|
||||
|
||||
}DEVICE_PROP;
|
||||
|
||||
typedef struct _USER_STANDARD_REQUESTS
|
||||
{
|
||||
void (*User_GetConfiguration)(void); /* Get Configuration */
|
||||
void (*User_SetConfiguration)(void); /* Set Configuration */
|
||||
void (*User_GetInterface)(void); /* Get Interface */
|
||||
void (*User_SetInterface)(void); /* Set Interface */
|
||||
void (*User_GetStatus)(void); /* Get Status */
|
||||
void (*User_ClearFeature)(void); /* Clear Feature */
|
||||
void (*User_SetEndPointFeature)(void); /* Set Endpoint Feature */
|
||||
void (*User_SetDeviceFeature)(void); /* Set Device Feature */
|
||||
void (*User_SetDeviceAddress)(void); /* Set Device Address */
|
||||
}
|
||||
USER_STANDARD_REQUESTS;
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
#define Type_Recipient (pInformation->USBbmRequestType & (REQUEST_TYPE | RECIPIENT))
|
||||
|
||||
#define Usb_rLength Usb_wLength
|
||||
#define Usb_rOffset Usb_wOffset
|
||||
|
||||
#define USBwValue USBwValues.w
|
||||
#define USBwValue0 USBwValues.bw.bb0
|
||||
#define USBwValue1 USBwValues.bw.bb1
|
||||
#define USBwIndex USBwIndexs.w
|
||||
#define USBwIndex0 USBwIndexs.bw.bb0
|
||||
#define USBwIndex1 USBwIndexs.bw.bb1
|
||||
#define USBwLength USBwLengths.w
|
||||
#define USBwLength0 USBwLengths.bw.bb0
|
||||
#define USBwLength1 USBwLengths.bw.bb1
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
uint8_t Setup0_Process(void);
|
||||
uint8_t Post0_Process(void);
|
||||
uint8_t Out0_Process(void);
|
||||
uint8_t In0_Process(void);
|
||||
|
||||
RESULT Standard_SetEndPointFeature(void);
|
||||
RESULT Standard_SetDeviceFeature(void);
|
||||
|
||||
uint8_t *Standard_GetConfiguration(uint16_t Length);
|
||||
RESULT Standard_SetConfiguration(void);
|
||||
uint8_t *Standard_GetInterface(uint16_t Length);
|
||||
RESULT Standard_SetInterface(void);
|
||||
uint8_t *Standard_GetDescriptorData(uint16_t Length, PONE_DESCRIPTOR pDesc);
|
||||
|
||||
uint8_t *Standard_GetStatus(uint16_t Length);
|
||||
RESULT Standard_ClearFeature(void);
|
||||
void SetDeviceAddress(uint8_t);
|
||||
void NOP_Process(void);
|
||||
|
||||
extern DEVICE_PROP Device_Property;
|
||||
extern USER_STANDARD_REQUESTS User_Standard_Requests;
|
||||
extern DEVICE Device_Table;
|
||||
extern DEVICE_INFO Device_Info;
|
||||
|
||||
/* cells saving status during interrupt servicing */
|
||||
extern __IO uint16_t SaveRState;
|
||||
extern __IO uint16_t SaveTState;
|
||||
|
||||
#endif /* __USB_CORE_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
92
lib/main/STM32_USB-FS-Device_Driver/inc/usb_def.h
Normal file
92
lib/main/STM32_USB-FS-Device_Driver/inc/usb_def.h
Normal file
|
@ -0,0 +1,92 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file usb_def.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief Definitions related to USB Core
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USB_DEF_H
|
||||
#define __USB_DEF_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
typedef enum _RECIPIENT_TYPE
|
||||
{
|
||||
DEVICE_RECIPIENT, /* Recipient device */
|
||||
INTERFACE_RECIPIENT, /* Recipient interface */
|
||||
ENDPOINT_RECIPIENT, /* Recipient endpoint */
|
||||
OTHER_RECIPIENT
|
||||
} RECIPIENT_TYPE;
|
||||
|
||||
|
||||
typedef enum _STANDARD_REQUESTS
|
||||
{
|
||||
GET_STATUS = 0,
|
||||
CLEAR_FEATURE,
|
||||
RESERVED1,
|
||||
SET_FEATURE,
|
||||
RESERVED2,
|
||||
SET_ADDRESS,
|
||||
GET_DESCRIPTOR,
|
||||
SET_DESCRIPTOR,
|
||||
GET_CONFIGURATION,
|
||||
SET_CONFIGURATION,
|
||||
GET_INTERFACE,
|
||||
SET_INTERFACE,
|
||||
TOTAL_sREQUEST, /* Total number of Standard request */
|
||||
SYNCH_FRAME = 12
|
||||
} STANDARD_REQUESTS;
|
||||
|
||||
/* Definition of "USBwValue" */
|
||||
typedef enum _DESCRIPTOR_TYPE
|
||||
{
|
||||
DEVICE_DESCRIPTOR = 1,
|
||||
CONFIG_DESCRIPTOR,
|
||||
STRING_DESCRIPTOR,
|
||||
INTERFACE_DESCRIPTOR,
|
||||
ENDPOINT_DESCRIPTOR
|
||||
} DESCRIPTOR_TYPE;
|
||||
|
||||
/* Feature selector of a SET_FEATURE or CLEAR_FEATURE */
|
||||
typedef enum _FEATURE_SELECTOR
|
||||
{
|
||||
ENDPOINT_STALL,
|
||||
DEVICE_REMOTE_WAKEUP
|
||||
} FEATURE_SELECTOR;
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Definition of "USBbmRequestType" */
|
||||
#define REQUEST_TYPE 0x60 /* Mask to get request type */
|
||||
#define STANDARD_REQUEST 0x00 /* Standard request */
|
||||
#define CLASS_REQUEST 0x20 /* Class request */
|
||||
#define VENDOR_REQUEST 0x40 /* Vendor request */
|
||||
|
||||
#define RECIPIENT 0x1F /* Mask to get recipient */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
|
||||
#endif /* __USB_DEF_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
62
lib/main/STM32_USB-FS-Device_Driver/inc/usb_init.h
Normal file
62
lib/main/STM32_USB-FS-Device_Driver/inc/usb_init.h
Normal file
|
@ -0,0 +1,62 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file usb_init.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief Initialization routines & global variables
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USB_INIT_H
|
||||
#define __USB_INIT_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void USB_Init(void);
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
/* The number of current endpoint, it will be used to specify an endpoint */
|
||||
extern uint8_t EPindex;
|
||||
/* The number of current device, it is an index to the Device_Table */
|
||||
/*extern uint8_t Device_no; */
|
||||
/* Points to the DEVICE_INFO structure of current device */
|
||||
/* The purpose of this register is to speed up the execution */
|
||||
extern DEVICE_INFO* pInformation;
|
||||
/* Points to the DEVICE_PROP structure of current device */
|
||||
/* The purpose of this register is to speed up the execution */
|
||||
extern DEVICE_PROP* pProperty;
|
||||
/* Temporary save the state of Rx & Tx status. */
|
||||
/* Whenever the Rx or Tx state is changed, its value is saved */
|
||||
/* in this variable first and will be set to the EPRB or EPRA */
|
||||
/* at the end of interrupt process */
|
||||
extern USER_STANDARD_REQUESTS *pUser_Standard_Requests;
|
||||
|
||||
extern uint16_t SaveState ;
|
||||
extern uint16_t wInterrupt_Mask;
|
||||
|
||||
#endif /* __USB_INIT_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
45
lib/main/STM32_USB-FS-Device_Driver/inc/usb_int.h
Normal file
45
lib/main/STM32_USB-FS-Device_Driver/inc/usb_int.h
Normal file
|
@ -0,0 +1,45 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file usb_int.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief Endpoint CTR (Low and High) interrupt's service routines prototypes
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USB_INT_H
|
||||
#define __USB_INT_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void CTR_LP(void);
|
||||
void CTR_HP(void);
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
|
||||
#endif /* __USB_INT_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
52
lib/main/STM32_USB-FS-Device_Driver/inc/usb_lib.h
Normal file
52
lib/main/STM32_USB-FS-Device_Driver/inc/usb_lib.h
Normal file
|
@ -0,0 +1,52 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file usb_lib.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief USB library include files
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USB_LIB_H
|
||||
#define __USB_LIB_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "hw_config.h"
|
||||
#include "usb_type.h"
|
||||
#include "usb_regs.h"
|
||||
#include "usb_def.h"
|
||||
#include "usb_core.h"
|
||||
#include "usb_init.h"
|
||||
#include "usb_sil.h"
|
||||
#include "usb_mem.h"
|
||||
#include "usb_int.h"
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
/* External variables --------------------------------------------------------*/
|
||||
|
||||
#endif /* __USB_LIB_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
45
lib/main/STM32_USB-FS-Device_Driver/inc/usb_mem.h
Normal file
45
lib/main/STM32_USB-FS-Device_Driver/inc/usb_mem.h
Normal file
|
@ -0,0 +1,45 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file usb_mem.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief Utility prototypes functions for memory/PMA transfers
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USB_MEM_H
|
||||
#define __USB_MEM_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void UserToPMABufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
|
||||
void PMAToUserBufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
|
||||
#endif /*__USB_MEM_H*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
680
lib/main/STM32_USB-FS-Device_Driver/inc/usb_regs.h
Normal file
680
lib/main/STM32_USB-FS-Device_Driver/inc/usb_regs.h
Normal file
|
@ -0,0 +1,680 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file usb_regs.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief Interface prototype functions to USB cell registers
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USB_REGS_H
|
||||
#define __USB_REGS_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
typedef enum _EP_DBUF_DIR
|
||||
{
|
||||
/* double buffered endpoint direction */
|
||||
EP_DBUF_ERR,
|
||||
EP_DBUF_OUT,
|
||||
EP_DBUF_IN
|
||||
}EP_DBUF_DIR;
|
||||
|
||||
/* endpoint buffer number */
|
||||
enum EP_BUF_NUM
|
||||
{
|
||||
EP_NOBUF,
|
||||
EP_BUF0,
|
||||
EP_BUF1
|
||||
};
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
#define RegBase (0x40005C00L) /* USB_IP Peripheral Registers base address */
|
||||
#define PMAAddr (0x40006000L) /* USB_IP Packet Memory Area base address */
|
||||
|
||||
/******************************************************************************/
|
||||
/* General registers */
|
||||
/******************************************************************************/
|
||||
|
||||
/* Control register */
|
||||
#define CNTR ((__IO unsigned *)(RegBase + 0x40))
|
||||
/* Interrupt status register */
|
||||
#define ISTR ((__IO unsigned *)(RegBase + 0x44))
|
||||
/* Frame number register */
|
||||
#define FNR ((__IO unsigned *)(RegBase + 0x48))
|
||||
/* Device address register */
|
||||
#define DADDR ((__IO unsigned *)(RegBase + 0x4C))
|
||||
/* Buffer Table address register */
|
||||
#define BTABLE ((__IO unsigned *)(RegBase + 0x50))
|
||||
/******************************************************************************/
|
||||
/* Endpoint registers */
|
||||
/******************************************************************************/
|
||||
#define EP0REG ((__IO unsigned *)(RegBase)) /* endpoint 0 register address */
|
||||
|
||||
/* Endpoint Addresses (w/direction) */
|
||||
#define EP0_OUT ((uint8_t)0x00)
|
||||
#define EP0_IN ((uint8_t)0x80)
|
||||
#define EP1_OUT ((uint8_t)0x01)
|
||||
#define EP1_IN ((uint8_t)0x81)
|
||||
#define EP2_OUT ((uint8_t)0x02)
|
||||
#define EP2_IN ((uint8_t)0x82)
|
||||
#define EP3_OUT ((uint8_t)0x03)
|
||||
#define EP3_IN ((uint8_t)0x83)
|
||||
#define EP4_OUT ((uint8_t)0x04)
|
||||
#define EP4_IN ((uint8_t)0x84)
|
||||
#define EP5_OUT ((uint8_t)0x05)
|
||||
#define EP5_IN ((uint8_t)0x85)
|
||||
#define EP6_OUT ((uint8_t)0x06)
|
||||
#define EP6_IN ((uint8_t)0x86)
|
||||
#define EP7_OUT ((uint8_t)0x07)
|
||||
#define EP7_IN ((uint8_t)0x87)
|
||||
|
||||
/* endpoints enumeration */
|
||||
#define ENDP0 ((uint8_t)0)
|
||||
#define ENDP1 ((uint8_t)1)
|
||||
#define ENDP2 ((uint8_t)2)
|
||||
#define ENDP3 ((uint8_t)3)
|
||||
#define ENDP4 ((uint8_t)4)
|
||||
#define ENDP5 ((uint8_t)5)
|
||||
#define ENDP6 ((uint8_t)6)
|
||||
#define ENDP7 ((uint8_t)7)
|
||||
|
||||
/******************************************************************************/
|
||||
/* ISTR interrupt events */
|
||||
/******************************************************************************/
|
||||
#define ISTR_CTR (0x8000) /* Correct TRansfer (clear-only bit) */
|
||||
#define ISTR_DOVR (0x4000) /* DMA OVeR/underrun (clear-only bit) */
|
||||
#define ISTR_ERR (0x2000) /* ERRor (clear-only bit) */
|
||||
#define ISTR_WKUP (0x1000) /* WaKe UP (clear-only bit) */
|
||||
#define ISTR_SUSP (0x0800) /* SUSPend (clear-only bit) */
|
||||
#define ISTR_RESET (0x0400) /* RESET (clear-only bit) */
|
||||
#define ISTR_SOF (0x0200) /* Start Of Frame (clear-only bit) */
|
||||
#define ISTR_ESOF (0x0100) /* Expected Start Of Frame (clear-only bit) */
|
||||
|
||||
|
||||
#define ISTR_DIR (0x0010) /* DIRection of transaction (read-only bit) */
|
||||
#define ISTR_EP_ID (0x000F) /* EndPoint IDentifier (read-only bit) */
|
||||
|
||||
#define CLR_CTR (~ISTR_CTR) /* clear Correct TRansfer bit */
|
||||
#define CLR_DOVR (~ISTR_DOVR) /* clear DMA OVeR/underrun bit*/
|
||||
#define CLR_ERR (~ISTR_ERR) /* clear ERRor bit */
|
||||
#define CLR_WKUP (~ISTR_WKUP) /* clear WaKe UP bit */
|
||||
#define CLR_SUSP (~ISTR_SUSP) /* clear SUSPend bit */
|
||||
#define CLR_RESET (~ISTR_RESET) /* clear RESET bit */
|
||||
#define CLR_SOF (~ISTR_SOF) /* clear Start Of Frame bit */
|
||||
#define CLR_ESOF (~ISTR_ESOF) /* clear Expected Start Of Frame bit */
|
||||
|
||||
/******************************************************************************/
|
||||
/* CNTR control register bits definitions */
|
||||
/******************************************************************************/
|
||||
#define CNTR_CTRM (0x8000) /* Correct TRansfer Mask */
|
||||
#define CNTR_DOVRM (0x4000) /* DMA OVeR/underrun Mask */
|
||||
#define CNTR_ERRM (0x2000) /* ERRor Mask */
|
||||
#define CNTR_WKUPM (0x1000) /* WaKe UP Mask */
|
||||
#define CNTR_SUSPM (0x0800) /* SUSPend Mask */
|
||||
#define CNTR_RESETM (0x0400) /* RESET Mask */
|
||||
#define CNTR_SOFM (0x0200) /* Start Of Frame Mask */
|
||||
#define CNTR_ESOFM (0x0100) /* Expected Start Of Frame Mask */
|
||||
|
||||
|
||||
#define CNTR_RESUME (0x0010) /* RESUME request */
|
||||
#define CNTR_FSUSP (0x0008) /* Force SUSPend */
|
||||
#define CNTR_LPMODE (0x0004) /* Low-power MODE */
|
||||
#define CNTR_PDWN (0x0002) /* Power DoWN */
|
||||
#define CNTR_FRES (0x0001) /* Force USB RESet */
|
||||
|
||||
/******************************************************************************/
|
||||
/* FNR Frame Number Register bit definitions */
|
||||
/******************************************************************************/
|
||||
#define FNR_RXDP (0x8000) /* status of D+ data line */
|
||||
#define FNR_RXDM (0x4000) /* status of D- data line */
|
||||
#define FNR_LCK (0x2000) /* LoCKed */
|
||||
#define FNR_LSOF (0x1800) /* Lost SOF */
|
||||
#define FNR_FN (0x07FF) /* Frame Number */
|
||||
/******************************************************************************/
|
||||
/* DADDR Device ADDRess bit definitions */
|
||||
/******************************************************************************/
|
||||
#define DADDR_EF (0x80)
|
||||
#define DADDR_ADD (0x7F)
|
||||
/******************************************************************************/
|
||||
/* Endpoint register */
|
||||
/******************************************************************************/
|
||||
/* bit positions */
|
||||
#define EP_CTR_RX (0x8000) /* EndPoint Correct TRansfer RX */
|
||||
#define EP_DTOG_RX (0x4000) /* EndPoint Data TOGGLE RX */
|
||||
#define EPRX_STAT (0x3000) /* EndPoint RX STATus bit field */
|
||||
#define EP_SETUP (0x0800) /* EndPoint SETUP */
|
||||
#define EP_T_FIELD (0x0600) /* EndPoint TYPE */
|
||||
#define EP_KIND (0x0100) /* EndPoint KIND */
|
||||
#define EP_CTR_TX (0x0080) /* EndPoint Correct TRansfer TX */
|
||||
#define EP_DTOG_TX (0x0040) /* EndPoint Data TOGGLE TX */
|
||||
#define EPTX_STAT (0x0030) /* EndPoint TX STATus bit field */
|
||||
#define EPADDR_FIELD (0x000F) /* EndPoint ADDRess FIELD */
|
||||
|
||||
/* EndPoint REGister MASK (no toggle fields) */
|
||||
#define EPREG_MASK (EP_CTR_RX|EP_SETUP|EP_T_FIELD|EP_KIND|EP_CTR_TX|EPADDR_FIELD)
|
||||
|
||||
/* EP_TYPE[1:0] EndPoint TYPE */
|
||||
#define EP_TYPE_MASK (0x0600) /* EndPoint TYPE Mask */
|
||||
#define EP_BULK (0x0000) /* EndPoint BULK */
|
||||
#define EP_CONTROL (0x0200) /* EndPoint CONTROL */
|
||||
#define EP_ISOCHRONOUS (0x0400) /* EndPoint ISOCHRONOUS */
|
||||
#define EP_INTERRUPT (0x0600) /* EndPoint INTERRUPT */
|
||||
#define EP_T_MASK (~EP_T_FIELD & EPREG_MASK)
|
||||
|
||||
|
||||
/* EP_KIND EndPoint KIND */
|
||||
#define EPKIND_MASK (~EP_KIND & EPREG_MASK)
|
||||
|
||||
/* STAT_TX[1:0] STATus for TX transfer */
|
||||
#define EP_TX_DIS (0x0000) /* EndPoint TX DISabled */
|
||||
#define EP_TX_STALL (0x0010) /* EndPoint TX STALLed */
|
||||
#define EP_TX_NAK (0x0020) /* EndPoint TX NAKed */
|
||||
#define EP_TX_VALID (0x0030) /* EndPoint TX VALID */
|
||||
#define EPTX_DTOG1 (0x0010) /* EndPoint TX Data TOGgle bit1 */
|
||||
#define EPTX_DTOG2 (0x0020) /* EndPoint TX Data TOGgle bit2 */
|
||||
#define EPTX_DTOGMASK (EPTX_STAT|EPREG_MASK)
|
||||
|
||||
/* STAT_RX[1:0] STATus for RX transfer */
|
||||
#define EP_RX_DIS (0x0000) /* EndPoint RX DISabled */
|
||||
#define EP_RX_STALL (0x1000) /* EndPoint RX STALLed */
|
||||
#define EP_RX_NAK (0x2000) /* EndPoint RX NAKed */
|
||||
#define EP_RX_VALID (0x3000) /* EndPoint RX VALID */
|
||||
#define EPRX_DTOG1 (0x1000) /* EndPoint RX Data TOGgle bit1 */
|
||||
#define EPRX_DTOG2 (0x2000) /* EndPoint RX Data TOGgle bit1 */
|
||||
#define EPRX_DTOGMASK (EPRX_STAT|EPREG_MASK)
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* SetCNTR */
|
||||
#define _SetCNTR(wRegValue) (*CNTR = (uint16_t)wRegValue)
|
||||
|
||||
/* SetISTR */
|
||||
#define _SetISTR(wRegValue) (*ISTR = (uint16_t)wRegValue)
|
||||
|
||||
/* SetDADDR */
|
||||
#define _SetDADDR(wRegValue) (*DADDR = (uint16_t)wRegValue)
|
||||
|
||||
/* SetBTABLE */
|
||||
#define _SetBTABLE(wRegValue)(*BTABLE = (uint16_t)(wRegValue & 0xFFF8))
|
||||
|
||||
/* GetCNTR */
|
||||
#define _GetCNTR() ((uint16_t) *CNTR)
|
||||
|
||||
/* GetISTR */
|
||||
#define _GetISTR() ((uint16_t) *ISTR)
|
||||
|
||||
/* GetFNR */
|
||||
#define _GetFNR() ((uint16_t) *FNR)
|
||||
|
||||
/* GetDADDR */
|
||||
#define _GetDADDR() ((uint16_t) *DADDR)
|
||||
|
||||
/* GetBTABLE */
|
||||
#define _GetBTABLE() ((uint16_t) *BTABLE)
|
||||
|
||||
/* SetENDPOINT */
|
||||
#define _SetENDPOINT(bEpNum,wRegValue) (*(EP0REG + bEpNum)= \
|
||||
(uint16_t)wRegValue)
|
||||
|
||||
/* GetENDPOINT */
|
||||
#define _GetENDPOINT(bEpNum) ((uint16_t)(*(EP0REG + bEpNum)))
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPType
|
||||
* Description : sets the type in the endpoint register(bits EP_TYPE[1:0])
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* wType
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPType(bEpNum,wType) (_SetENDPOINT(bEpNum,\
|
||||
((_GetENDPOINT(bEpNum) & EP_T_MASK) | wType )))
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : GetEPType
|
||||
* Description : gets the type in the endpoint register(bits EP_TYPE[1:0])
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : Endpoint Type
|
||||
*******************************************************************************/
|
||||
#define _GetEPType(bEpNum) (_GetENDPOINT(bEpNum) & EP_T_FIELD)
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPTxStatus
|
||||
* Description : sets the status for tx transfer (bits STAT_TX[1:0]).
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* wState: new state
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPTxStatus(bEpNum,wState) {\
|
||||
register uint16_t _wRegVal; \
|
||||
_wRegVal = _GetENDPOINT(bEpNum) & EPTX_DTOGMASK;\
|
||||
/* toggle first bit ? */ \
|
||||
if((EPTX_DTOG1 & wState)!= 0) \
|
||||
_wRegVal ^= EPTX_DTOG1; \
|
||||
/* toggle second bit ? */ \
|
||||
if((EPTX_DTOG2 & wState)!= 0) \
|
||||
_wRegVal ^= EPTX_DTOG2; \
|
||||
_SetENDPOINT(bEpNum, (_wRegVal | EP_CTR_RX|EP_CTR_TX)); \
|
||||
} /* _SetEPTxStatus */
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPRxStatus
|
||||
* Description : sets the status for rx transfer (bits STAT_TX[1:0])
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* wState: new state.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPRxStatus(bEpNum,wState) {\
|
||||
register uint16_t _wRegVal; \
|
||||
\
|
||||
_wRegVal = _GetENDPOINT(bEpNum) & EPRX_DTOGMASK;\
|
||||
/* toggle first bit ? */ \
|
||||
if((EPRX_DTOG1 & wState)!= 0) \
|
||||
_wRegVal ^= EPRX_DTOG1; \
|
||||
/* toggle second bit ? */ \
|
||||
if((EPRX_DTOG2 & wState)!= 0) \
|
||||
_wRegVal ^= EPRX_DTOG2; \
|
||||
_SetENDPOINT(bEpNum, (_wRegVal | EP_CTR_RX|EP_CTR_TX)); \
|
||||
} /* _SetEPRxStatus */
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPRxTxStatus
|
||||
* Description : sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0])
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* wStaterx: new state.
|
||||
* wStatetx: new state.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPRxTxStatus(bEpNum,wStaterx,wStatetx) {\
|
||||
register uint32_t _wRegVal; \
|
||||
\
|
||||
_wRegVal = _GetENDPOINT(bEpNum) & (EPRX_DTOGMASK |EPTX_STAT) ;\
|
||||
/* toggle first bit ? */ \
|
||||
if((EPRX_DTOG1 & wStaterx)!= 0) \
|
||||
_wRegVal ^= EPRX_DTOG1; \
|
||||
/* toggle second bit ? */ \
|
||||
if((EPRX_DTOG2 & wStaterx)!= 0) \
|
||||
_wRegVal ^= EPRX_DTOG2; \
|
||||
/* toggle first bit ? */ \
|
||||
if((EPTX_DTOG1 & wStatetx)!= 0) \
|
||||
_wRegVal ^= EPTX_DTOG1; \
|
||||
/* toggle second bit ? */ \
|
||||
if((EPTX_DTOG2 & wStatetx)!= 0) \
|
||||
_wRegVal ^= EPTX_DTOG2; \
|
||||
_SetENDPOINT(bEpNum, _wRegVal | EP_CTR_RX|EP_CTR_TX); \
|
||||
} /* _SetEPRxTxStatus */
|
||||
/*******************************************************************************
|
||||
* Macro Name : GetEPTxStatus / GetEPRxStatus
|
||||
* Description : gets the status for tx/rx transfer (bits STAT_TX[1:0]
|
||||
* /STAT_RX[1:0])
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : status .
|
||||
*******************************************************************************/
|
||||
#define _GetEPTxStatus(bEpNum) ((uint16_t)_GetENDPOINT(bEpNum) & EPTX_STAT)
|
||||
|
||||
#define _GetEPRxStatus(bEpNum) ((uint16_t)_GetENDPOINT(bEpNum) & EPRX_STAT)
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPTxValid / SetEPRxValid
|
||||
* Description : sets directly the VALID tx/rx-status into the enpoint register
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPTxValid(bEpNum) (_SetEPTxStatus(bEpNum, EP_TX_VALID))
|
||||
|
||||
#define _SetEPRxValid(bEpNum) (_SetEPRxStatus(bEpNum, EP_RX_VALID))
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : GetTxStallStatus / GetRxStallStatus.
|
||||
* Description : checks stall condition in an endpoint.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : TRUE = endpoint in stall condition.
|
||||
*******************************************************************************/
|
||||
#define _GetTxStallStatus(bEpNum) (_GetEPTxStatus(bEpNum) \
|
||||
== EP_TX_STALL)
|
||||
#define _GetRxStallStatus(bEpNum) (_GetEPRxStatus(bEpNum) \
|
||||
== EP_RX_STALL)
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEP_KIND / ClearEP_KIND.
|
||||
* Description : set & clear EP_KIND bit.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEP_KIND(bEpNum) (_SetENDPOINT(bEpNum, \
|
||||
(EP_CTR_RX|EP_CTR_TX|((_GetENDPOINT(bEpNum) | EP_KIND) & EPREG_MASK))))
|
||||
#define _ClearEP_KIND(bEpNum) (_SetENDPOINT(bEpNum, \
|
||||
(EP_CTR_RX|EP_CTR_TX|(_GetENDPOINT(bEpNum) & EPKIND_MASK))))
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : Set_Status_Out / Clear_Status_Out.
|
||||
* Description : Sets/clears directly STATUS_OUT bit in the endpoint register.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _Set_Status_Out(bEpNum) _SetEP_KIND(bEpNum)
|
||||
#define _Clear_Status_Out(bEpNum) _ClearEP_KIND(bEpNum)
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPDoubleBuff / ClearEPDoubleBuff.
|
||||
* Description : Sets/clears directly EP_KIND bit in the endpoint register.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPDoubleBuff(bEpNum) _SetEP_KIND(bEpNum)
|
||||
#define _ClearEPDoubleBuff(bEpNum) _ClearEP_KIND(bEpNum)
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : ClearEP_CTR_RX / ClearEP_CTR_TX.
|
||||
* Description : Clears bit CTR_RX / CTR_TX in the endpoint register.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _ClearEP_CTR_RX(bEpNum) (_SetENDPOINT(bEpNum,\
|
||||
_GetENDPOINT(bEpNum) & 0x7FFF & EPREG_MASK))
|
||||
#define _ClearEP_CTR_TX(bEpNum) (_SetENDPOINT(bEpNum,\
|
||||
_GetENDPOINT(bEpNum) & 0xFF7F & EPREG_MASK))
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : ToggleDTOG_RX / ToggleDTOG_TX .
|
||||
* Description : Toggles DTOG_RX / DTOG_TX bit in the endpoint register.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _ToggleDTOG_RX(bEpNum) (_SetENDPOINT(bEpNum, \
|
||||
EP_CTR_RX|EP_CTR_TX|EP_DTOG_RX | (_GetENDPOINT(bEpNum) & EPREG_MASK)))
|
||||
#define _ToggleDTOG_TX(bEpNum) (_SetENDPOINT(bEpNum, \
|
||||
EP_CTR_RX|EP_CTR_TX|EP_DTOG_TX | (_GetENDPOINT(bEpNum) & EPREG_MASK)))
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : ClearDTOG_RX / ClearDTOG_TX.
|
||||
* Description : Clears DTOG_RX / DTOG_TX bit in the endpoint register.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _ClearDTOG_RX(bEpNum) if((_GetENDPOINT(bEpNum) & EP_DTOG_RX) != 0)\
|
||||
_ToggleDTOG_RX(bEpNum)
|
||||
#define _ClearDTOG_TX(bEpNum) if((_GetENDPOINT(bEpNum) & EP_DTOG_TX) != 0)\
|
||||
_ToggleDTOG_TX(bEpNum)
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPAddress.
|
||||
* Description : Sets address in an endpoint register.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* bAddr: Address.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPAddress(bEpNum,bAddr) _SetENDPOINT(bEpNum,\
|
||||
EP_CTR_RX|EP_CTR_TX|(_GetENDPOINT(bEpNum) & EPREG_MASK) | bAddr)
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : GetEPAddress.
|
||||
* Description : Gets address in an endpoint register.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _GetEPAddress(bEpNum) ((uint8_t)(_GetENDPOINT(bEpNum) & EPADDR_FIELD))
|
||||
|
||||
#define _pEPTxAddr(bEpNum) ((uint32_t *)((_GetBTABLE()+bEpNum*8 )*2 + PMAAddr))
|
||||
#define _pEPTxCount(bEpNum) ((uint32_t *)((_GetBTABLE()+bEpNum*8+2)*2 + PMAAddr))
|
||||
#define _pEPRxAddr(bEpNum) ((uint32_t *)((_GetBTABLE()+bEpNum*8+4)*2 + PMAAddr))
|
||||
#define _pEPRxCount(bEpNum) ((uint32_t *)((_GetBTABLE()+bEpNum*8+6)*2 + PMAAddr))
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPTxAddr / SetEPRxAddr.
|
||||
* Description : sets address of the tx/rx buffer.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* wAddr: address to be set (must be word aligned).
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPTxAddr(bEpNum,wAddr) (*_pEPTxAddr(bEpNum) = ((wAddr >> 1) << 1))
|
||||
#define _SetEPRxAddr(bEpNum,wAddr) (*_pEPRxAddr(bEpNum) = ((wAddr >> 1) << 1))
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : GetEPTxAddr / GetEPRxAddr.
|
||||
* Description : Gets address of the tx/rx buffer.
|
||||
* Input : bEpNum: Endpoint Number.
|
||||
* Output : None.
|
||||
* Return : address of the buffer.
|
||||
*******************************************************************************/
|
||||
#define _GetEPTxAddr(bEpNum) ((uint16_t)*_pEPTxAddr(bEpNum))
|
||||
#define _GetEPRxAddr(bEpNum) ((uint16_t)*_pEPRxAddr(bEpNum))
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPCountRxReg.
|
||||
* Description : Sets counter of rx buffer with no. of blocks.
|
||||
* Input : pdwReg: pointer to counter.
|
||||
* wCount: Counter.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _BlocksOf32(dwReg,wCount,wNBlocks) {\
|
||||
wNBlocks = wCount >> 5;\
|
||||
if((wCount & 0x1f) == 0)\
|
||||
wNBlocks--;\
|
||||
*pdwReg = (uint32_t)((wNBlocks << 10) | 0x8000);\
|
||||
}/* _BlocksOf32 */
|
||||
|
||||
#define _BlocksOf2(dwReg,wCount,wNBlocks) {\
|
||||
wNBlocks = wCount >> 1;\
|
||||
if((wCount & 0x1) != 0)\
|
||||
wNBlocks++;\
|
||||
*pdwReg = (uint32_t)(wNBlocks << 10);\
|
||||
}/* _BlocksOf2 */
|
||||
|
||||
#define _SetEPCountRxReg(dwReg,wCount) {\
|
||||
uint16_t wNBlocks;\
|
||||
if(wCount > 62){_BlocksOf32(dwReg,wCount,wNBlocks);}\
|
||||
else {_BlocksOf2(dwReg,wCount,wNBlocks);}\
|
||||
}/* _SetEPCountRxReg */
|
||||
|
||||
|
||||
|
||||
#define _SetEPRxDblBuf0Count(bEpNum,wCount) {\
|
||||
uint32_t *pdwReg = _pEPTxCount(bEpNum); \
|
||||
_SetEPCountRxReg(pdwReg, wCount);\
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPTxCount / SetEPRxCount.
|
||||
* Description : sets counter for the tx/rx buffer.
|
||||
* Input : bEpNum: endpoint number.
|
||||
* wCount: Counter value.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPTxCount(bEpNum,wCount) (*_pEPTxCount(bEpNum) = wCount)
|
||||
#define _SetEPRxCount(bEpNum,wCount) {\
|
||||
uint32_t *pdwReg = _pEPRxCount(bEpNum); \
|
||||
_SetEPCountRxReg(pdwReg, wCount);\
|
||||
}
|
||||
/*******************************************************************************
|
||||
* Macro Name : GetEPTxCount / GetEPRxCount.
|
||||
* Description : gets counter of the tx buffer.
|
||||
* Input : bEpNum: endpoint number.
|
||||
* Output : None.
|
||||
* Return : Counter value.
|
||||
*******************************************************************************/
|
||||
#define _GetEPTxCount(bEpNum)((uint16_t)(*_pEPTxCount(bEpNum)) & 0x3ff)
|
||||
#define _GetEPRxCount(bEpNum)((uint16_t)(*_pEPRxCount(bEpNum)) & 0x3ff)
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPDblBuf0Addr / SetEPDblBuf1Addr.
|
||||
* Description : Sets buffer 0/1 address in a double buffer endpoint.
|
||||
* Input : bEpNum: endpoint number.
|
||||
* : wBuf0Addr: buffer 0 address.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPDblBuf0Addr(bEpNum,wBuf0Addr) {_SetEPTxAddr(bEpNum, wBuf0Addr);}
|
||||
#define _SetEPDblBuf1Addr(bEpNum,wBuf1Addr) {_SetEPRxAddr(bEpNum, wBuf1Addr);}
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPDblBuffAddr.
|
||||
* Description : Sets addresses in a double buffer endpoint.
|
||||
* Input : bEpNum: endpoint number.
|
||||
* : wBuf0Addr: buffer 0 address.
|
||||
* : wBuf1Addr = buffer 1 address.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPDblBuffAddr(bEpNum,wBuf0Addr,wBuf1Addr) { \
|
||||
_SetEPDblBuf0Addr(bEpNum, wBuf0Addr);\
|
||||
_SetEPDblBuf1Addr(bEpNum, wBuf1Addr);\
|
||||
} /* _SetEPDblBuffAddr */
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : GetEPDblBuf0Addr / GetEPDblBuf1Addr.
|
||||
* Description : Gets buffer 0/1 address of a double buffer endpoint.
|
||||
* Input : bEpNum: endpoint number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _GetEPDblBuf0Addr(bEpNum) (_GetEPTxAddr(bEpNum))
|
||||
#define _GetEPDblBuf1Addr(bEpNum) (_GetEPRxAddr(bEpNum))
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : SetEPDblBuffCount / SetEPDblBuf0Count / SetEPDblBuf1Count.
|
||||
* Description : Gets buffer 0/1 address of a double buffer endpoint.
|
||||
* Input : bEpNum: endpoint number.
|
||||
* : bDir: endpoint dir EP_DBUF_OUT = OUT
|
||||
* EP_DBUF_IN = IN
|
||||
* : wCount: Counter value
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _SetEPDblBuf0Count(bEpNum, bDir, wCount) { \
|
||||
if(bDir == EP_DBUF_OUT)\
|
||||
/* OUT endpoint */ \
|
||||
{_SetEPRxDblBuf0Count(bEpNum,wCount);} \
|
||||
else if(bDir == EP_DBUF_IN)\
|
||||
/* IN endpoint */ \
|
||||
*_pEPTxCount(bEpNum) = (uint32_t)wCount; \
|
||||
} /* SetEPDblBuf0Count*/
|
||||
|
||||
#define _SetEPDblBuf1Count(bEpNum, bDir, wCount) { \
|
||||
if(bDir == EP_DBUF_OUT)\
|
||||
/* OUT endpoint */ \
|
||||
{_SetEPRxCount(bEpNum,wCount);}\
|
||||
else if(bDir == EP_DBUF_IN)\
|
||||
/* IN endpoint */\
|
||||
*_pEPRxCount(bEpNum) = (uint32_t)wCount; \
|
||||
} /* SetEPDblBuf1Count */
|
||||
|
||||
#define _SetEPDblBuffCount(bEpNum, bDir, wCount) {\
|
||||
_SetEPDblBuf0Count(bEpNum, bDir, wCount); \
|
||||
_SetEPDblBuf1Count(bEpNum, bDir, wCount); \
|
||||
} /* _SetEPDblBuffCount */
|
||||
|
||||
/*******************************************************************************
|
||||
* Macro Name : GetEPDblBuf0Count / GetEPDblBuf1Count.
|
||||
* Description : Gets buffer 0/1 rx/tx counter for double buffering.
|
||||
* Input : bEpNum: endpoint number.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
#define _GetEPDblBuf0Count(bEpNum) (_GetEPTxCount(bEpNum))
|
||||
#define _GetEPDblBuf1Count(bEpNum) (_GetEPRxCount(bEpNum))
|
||||
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
extern __IO uint16_t wIstr; /* ISTR register last read value */
|
||||
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void SetCNTR(uint16_t /*wRegValue*/);
|
||||
void SetISTR(uint16_t /*wRegValue*/);
|
||||
void SetDADDR(uint16_t /*wRegValue*/);
|
||||
void SetBTABLE(uint16_t /*wRegValue*/);
|
||||
void SetBTABLE(uint16_t /*wRegValue*/);
|
||||
uint16_t GetCNTR(void);
|
||||
uint16_t GetISTR(void);
|
||||
uint16_t GetFNR(void);
|
||||
uint16_t GetDADDR(void);
|
||||
uint16_t GetBTABLE(void);
|
||||
void SetENDPOINT(uint8_t /*bEpNum*/, uint16_t /*wRegValue*/);
|
||||
uint16_t GetENDPOINT(uint8_t /*bEpNum*/);
|
||||
void SetEPType(uint8_t /*bEpNum*/, uint16_t /*wType*/);
|
||||
uint16_t GetEPType(uint8_t /*bEpNum*/);
|
||||
void SetEPTxStatus(uint8_t /*bEpNum*/, uint16_t /*wState*/);
|
||||
void SetEPRxStatus(uint8_t /*bEpNum*/, uint16_t /*wState*/);
|
||||
void SetDouBleBuffEPStall(uint8_t /*bEpNum*/, uint8_t bDir);
|
||||
uint16_t GetEPTxStatus(uint8_t /*bEpNum*/);
|
||||
uint16_t GetEPRxStatus(uint8_t /*bEpNum*/);
|
||||
void SetEPTxValid(uint8_t /*bEpNum*/);
|
||||
void SetEPRxValid(uint8_t /*bEpNum*/);
|
||||
uint16_t GetTxStallStatus(uint8_t /*bEpNum*/);
|
||||
uint16_t GetRxStallStatus(uint8_t /*bEpNum*/);
|
||||
void SetEP_KIND(uint8_t /*bEpNum*/);
|
||||
void ClearEP_KIND(uint8_t /*bEpNum*/);
|
||||
void Set_Status_Out(uint8_t /*bEpNum*/);
|
||||
void Clear_Status_Out(uint8_t /*bEpNum*/);
|
||||
void SetEPDoubleBuff(uint8_t /*bEpNum*/);
|
||||
void ClearEPDoubleBuff(uint8_t /*bEpNum*/);
|
||||
void ClearEP_CTR_RX(uint8_t /*bEpNum*/);
|
||||
void ClearEP_CTR_TX(uint8_t /*bEpNum*/);
|
||||
void ToggleDTOG_RX(uint8_t /*bEpNum*/);
|
||||
void ToggleDTOG_TX(uint8_t /*bEpNum*/);
|
||||
void ClearDTOG_RX(uint8_t /*bEpNum*/);
|
||||
void ClearDTOG_TX(uint8_t /*bEpNum*/);
|
||||
void SetEPAddress(uint8_t /*bEpNum*/, uint8_t /*bAddr*/);
|
||||
uint8_t GetEPAddress(uint8_t /*bEpNum*/);
|
||||
void SetEPTxAddr(uint8_t /*bEpNum*/, uint16_t /*wAddr*/);
|
||||
void SetEPRxAddr(uint8_t /*bEpNum*/, uint16_t /*wAddr*/);
|
||||
uint16_t GetEPTxAddr(uint8_t /*bEpNum*/);
|
||||
uint16_t GetEPRxAddr(uint8_t /*bEpNum*/);
|
||||
void SetEPCountRxReg(uint32_t * /*pdwReg*/, uint16_t /*wCount*/);
|
||||
void SetEPTxCount(uint8_t /*bEpNum*/, uint16_t /*wCount*/);
|
||||
void SetEPRxCount(uint8_t /*bEpNum*/, uint16_t /*wCount*/);
|
||||
uint16_t GetEPTxCount(uint8_t /*bEpNum*/);
|
||||
uint16_t GetEPRxCount(uint8_t /*bEpNum*/);
|
||||
void SetEPDblBuf0Addr(uint8_t /*bEpNum*/, uint16_t /*wBuf0Addr*/);
|
||||
void SetEPDblBuf1Addr(uint8_t /*bEpNum*/, uint16_t /*wBuf1Addr*/);
|
||||
void SetEPDblBuffAddr(uint8_t /*bEpNum*/, uint16_t /*wBuf0Addr*/, uint16_t /*wBuf1Addr*/);
|
||||
uint16_t GetEPDblBuf0Addr(uint8_t /*bEpNum*/);
|
||||
uint16_t GetEPDblBuf1Addr(uint8_t /*bEpNum*/);
|
||||
void SetEPDblBuffCount(uint8_t /*bEpNum*/, uint8_t /*bDir*/, uint16_t /*wCount*/);
|
||||
void SetEPDblBuf0Count(uint8_t /*bEpNum*/, uint8_t /*bDir*/, uint16_t /*wCount*/);
|
||||
void SetEPDblBuf1Count(uint8_t /*bEpNum*/, uint8_t /*bDir*/, uint16_t /*wCount*/);
|
||||
uint16_t GetEPDblBuf0Count(uint8_t /*bEpNum*/);
|
||||
uint16_t GetEPDblBuf1Count(uint8_t /*bEpNum*/);
|
||||
EP_DBUF_DIR GetEPDblBufDir(uint8_t /*bEpNum*/);
|
||||
void FreeUserBuffer(uint8_t bEpNum/*bEpNum*/, uint8_t bDir);
|
||||
uint16_t ToWord(uint8_t, uint8_t);
|
||||
uint16_t ByteSwap(uint16_t);
|
||||
|
||||
#endif /* __USB_REGS_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
47
lib/main/STM32_USB-FS-Device_Driver/inc/usb_sil.h
Normal file
47
lib/main/STM32_USB-FS-Device_Driver/inc/usb_sil.h
Normal file
|
@ -0,0 +1,47 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file usb_sil.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief Simplified Interface Layer function prototypes.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USB_SIL_H
|
||||
#define __USB_SIL_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
|
||||
uint32_t USB_SIL_Init(void);
|
||||
uint32_t USB_SIL_Write(uint8_t bEpAddr, uint8_t* pBufferPointer, uint32_t wBufferSize);
|
||||
uint32_t USB_SIL_Read(uint8_t bEpAddr, uint8_t* pBufferPointer);
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
|
||||
#endif /* __USB_SIL_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
54
lib/main/STM32_USB-FS-Device_Driver/inc/usb_type.h
Normal file
54
lib/main/STM32_USB-FS-Device_Driver/inc/usb_type.h
Normal file
|
@ -0,0 +1,54 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file usb_type.h
|
||||
* @author MCD Application Team
|
||||
* @version V4.0.0
|
||||
* @date 28-August-2012
|
||||
* @brief Type definitions used by the USB Library
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USB_TYPE_H
|
||||
#define __USB_TYPE_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usb_conf.h"
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
#ifndef NULL
|
||||
#define NULL ((void *)0)
|
||||
#endif
|
||||
|
||||
typedef enum
|
||||
{
|
||||
FALSE = 0, TRUE = !FALSE
|
||||
}
|
||||
boolean;
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
/* External variables --------------------------------------------------------*/
|
||||
|
||||
#endif /* __USB_TYPE_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
Loading…
Add table
Add a link
Reference in a new issue