Moved USE_SOFTSERIALx to target.h

Makefile

@@ -581,6 +581,7 @@ COMMON_SRC = \
             drivers/rx_pwm.c \
             drivers/serial.c \
             drivers/serial_uart.c \
+            drivers/serial_softserial.c \
             drivers/sound_beeper.c \
             drivers/stack_check.c \
             drivers/system.c \
@@ -651,7 +652,6 @@ HIGHEND_SRC = \
             drivers/display_ug2864hsweg01.c \
             drivers/light_ws2811strip.c \
             drivers/serial_escserial.c \
-            drivers/serial_softserial.c \
             drivers/sonar_hcsr04.c \
             drivers/vtx_common.c \
             flight/navigation.c \

src/main/target/AIR32/target.h

@@ -60,7 +60,9 @@
 #define USE_UART1
 #define USE_UART2
 #define USE_UART3
-#define SERIAL_PORT_COUNT       4
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+#define SERIAL_PORT_COUNT       6
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/ALIENFLIGHTF1/target.h

@@ -45,7 +45,9 @@
 #define USE_UART1
 #define USE_UART2
 #define USE_UART3
-#define SERIAL_PORT_COUNT       3
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+#define SERIAL_PORT_COUNT       5
 
 #define UART3_RX_PIN            PB11
 #define UART3_TX_PIN            PB10

src/main/target/ALIENFLIGHTF3/target.h

@@ -70,7 +70,11 @@
 #define USE_UART1 // Not connected - TX (PB6) RX PB7 (AF7)
 #define USE_UART2 // Receiver - RX (PA3)
 #define USE_UART3 // Not connected - 10/RX (PB11) 11/TX (PB10)
-#define SERIAL_PORT_COUNT       4
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       6
+
 #define AVOID_UART2_FOR_PWM_PPM
 
 #define USE_ESCSERIAL

src/main/target/ALIENFLIGHTF4/target.h

@@ -121,7 +121,10 @@
 //#define UART5_RX_PIN            PD2
 //#define UART5_TX_PIN            PC12
 
-#define SERIAL_PORT_COUNT       4
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+define SERIAL_PORT_COUNT       6
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/ANYFCF7/target.h

@@ -94,7 +94,10 @@
 #define UART8_RX_PIN PE0
 #define UART8_TX_PIN PE1
 
-#define SERIAL_PORT_COUNT 9 //VCP, USART1, USART2, USART3, UART4, UART5, USART6, USART7, USART8
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT 11 //VCP, USART1, USART2, USART3, UART4, UART5, USART6, USART7, USART8, SOFTSERIAL x 2
 
 #define USE_SPI
 #define USE_SPI_DEVICE_1

src/main/target/BETAFLIGHTF3/target.h

@@ -56,7 +56,9 @@
 #define USE_UART2
 #define USE_UART3
 #define USE_SOFTSERIAL1
-#define SERIAL_PORT_COUNT       5
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       6
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/BLUEJAYF4/target.h

@@ -116,7 +116,9 @@
 #define SOFTSERIAL1_RX_PIN      PB0 // PWM5
 #define SOFTSERIAL1_TX_PIN      PB1 // PWM6
 
-#define SERIAL_PORT_COUNT       5
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       6
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/CC3D/target.h

@@ -71,14 +71,14 @@
 #define USE_VCP
 #define USE_UART1
 #define USE_UART3
-
-#ifdef CC3D_OPBL
-#define SERIAL_PORT_COUNT       3
-#else
 #define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       5
+
+#ifndef CC3D_OPBL
 #define SOFTSERIAL1_TX_PIN      PB5 // PWM 2
 #define SOFTSERIAL1_RX_PIN      PB0 // PWM 3
-#define SERIAL_PORT_COUNT       4
 #endif
 
 #ifdef USE_UART1_RX_DMA

src/main/target/CHEBUZZF3/target.h

@@ -91,7 +91,10 @@
 #define USE_VCP
 #define USE_UART1
 #define USE_UART2
-#define SERIAL_PORT_COUNT 3
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT 5
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/COLIBRI/target.h

@@ -93,7 +93,10 @@
 #define UART5_RX_PIN            PD2
 #define UART5_TX_PIN            PC12
 
-#define SERIAL_PORT_COUNT       4 //VCP, UART1, UART2, UART3
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       6 //VCP, UART1, UART2, UART3, SOFTSERIAL x 2
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/COLIBRI_RACE/target.h

@@ -80,7 +80,10 @@
 #define USE_UART1
 #define USE_UART2
 #define USE_UART3
-#define SERIAL_PORT_COUNT       4
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       6
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/DOGE/target.h

@@ -96,7 +96,10 @@
 #define USE_UART1
 #define USE_UART2
 #define USE_UART3
-#define SERIAL_PORT_COUNT 4
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT 6
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/ELLE0/target.h

@@ -76,7 +76,10 @@
 //#define UART5_RX_PIN            PD2
 //#define UART5_TX_PIN            PC12
 
-#define SERIAL_PORT_COUNT 3
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT 5
 
 #define USE_SPI
 

src/main/target/F4BY/target.h

@@ -100,7 +100,10 @@
 #define UART6_RX_PIN            PC7
 #define UART6_TX_PIN            PC6
 
-#define SERIAL_PORT_COUNT       6 //VCP, UART1, UART2, UART3, UART4, UART5, UART6
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       7 //VCP, UART1, UART2, UART3, UART4, UART6, SOFTSERIAL x 2
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 8 // PWM 9

src/main/target/FISHDRONEF4/target.h

@@ -66,7 +66,10 @@
 #define UART6_RX_PIN            PC7
 #define UART6_TX_PIN            PC6
 
-#define SERIAL_PORT_COUNT       4 // VCP, USART1, USART3, USART6
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       6 // VCP, USART1, USART3, USART6, SOFTSERIAL x 2
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/FURYF3/target.h

@@ -115,7 +115,9 @@
 #define USE_UART2
 #define USE_UART3
 #define USE_SOFTSERIAL1
-#define SERIAL_PORT_COUNT 5
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT 6
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/FURYF4/target.h

@@ -130,7 +130,10 @@
 #define UART6_RX_PIN            PC7
 #define UART6_TX_PIN            PC6
 
-#define SERIAL_PORT_COUNT       4 //VCP, USART1, USART3, USART6
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       6 //VCP, USART1, USART3, USART6, SOFTSERIAL x 2
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/FURYF7/target.h

@@ -118,7 +118,10 @@
 #define UART6_RX_PIN            PC7
 #define UART6_TX_PIN            PC6
 
-#define SERIAL_PORT_COUNT       4 //VCP, USART1, USART3, USART6
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       6 //VCP, USART1, USART3, USART6, SOFTSERIAL x 2
 
 #define USE_I2C
 #define I2C_DEVICE              (I2CDEV_1)  // PB6-SCL, PB7-SDA

src/main/target/IMPULSERCF3/target.h

@@ -54,7 +54,10 @@
 #define USE_UART1
 #define USE_UART2
 #define USE_UART3
-#define SERIAL_PORT_COUNT 4
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT 6
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/IRCFUSIONF3/target.h

@@ -45,7 +45,10 @@
 #define USE_UART1
 #define USE_UART2
 #define USE_UART3
-#define SERIAL_PORT_COUNT 3
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT 5
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/KAKUTEF4/target.h

@@ -91,7 +91,10 @@
 #define UART6_RX_PIN            PC7
 #define UART6_TX_PIN            PC6
 
-#define SERIAL_PORT_COUNT 4
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT 6
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/KISSFC/target.h

@@ -64,6 +64,10 @@
 #define USE_UART1
 #define USE_UART2
 #define USE_UART3
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       6
 
 #define UART1_TX_PIN            PA9
 #define UART1_RX_PIN            PA10
@@ -75,11 +79,7 @@
 #define UART3_RX_PIN            PB11 // PB11 (AF7)
 
 #ifdef KISSCC
-#define USE_SOFTSERIAL1
 #define SOFTSERIAL1_TX_PIN      PA13
-#define SERIAL_PORT_COUNT       5
-#else
-#define SERIAL_PORT_COUNT       4
 #endif
 
 #define USE_I2C

src/main/target/KIWIF4/target.h

@@ -79,7 +79,10 @@
 #define UART6_RX_PIN            PC7
 #define UART6_TX_PIN            PC6
 
-#define SERIAL_PORT_COUNT       4 //VCP, USART1, USART3, USART6
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       6 //VCP, USART1, USART3, USART6, SOFTSERIAL x 2
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/LUX_RACE/target.h

@@ -119,12 +119,14 @@
 #define USE_UART1
 #define USE_UART2
 #define USE_UART3
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
 #ifdef LUXV2_RACE
-#define USE_UART4
-#define USE_UART5
-#define SERIAL_PORT_COUNT       6
+#  define USE_UART4
+#  define USE_UART5
+#  define SERIAL_PORT_COUNT       8
 #else
-#define SERIAL_PORT_COUNT       4
+#  define SERIAL_PORT_COUNT       6
 #endif
 
 #define UART1_TX_PIN            PC4

src/main/target/MOTOLAB/target.h

@@ -59,7 +59,10 @@
 #define USE_UART1
 #define USE_UART2
 #define USE_UART3
-#define SERIAL_PORT_COUNT       4
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       6
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/MULTIFLITEPICO/target.h

@@ -64,9 +64,10 @@
 #define USE_UART1
 #define USE_UART2
 #define USE_UART3
-//#define USE_SOFTSERIAL1
-//#define USE_SOFTSERIAL2
-#define SERIAL_PORT_COUNT       3
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       5
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/NERO/target.h

@@ -88,7 +88,10 @@
 #define UART6_RX_PIN            PC7
 #define UART6_TX_PIN            PC6
 
-#define SERIAL_PORT_COUNT       4
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       6
 
 //#define USE_ESCSERIAL //TODO: make ESC serial F7 compatible
 //#define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/NUCLEOF7/target.h

@@ -93,7 +93,10 @@
 #define UART8_RX_PIN PE0
 #define UART8_TX_PIN PE1
 
-#define SERIAL_PORT_COUNT 8 //VCP, USART2, USART3, UART4, UART5, USART6, USART7, USART8
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT 10 //VCP, USART2, USART3, UART4, UART5, USART6, USART7, USART8, SOFTSERIAL x 2
 
 #define USE_SPI
 #define USE_SPI_DEVICE_1

src/main/target/OMNIBUS/target.h

@@ -68,7 +68,10 @@
 #define USE_UART1
 #define USE_UART2
 #define USE_UART3
-#define SERIAL_PORT_COUNT       4
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       6
 
 #define UART1_TX_PIN            PA9
 #define UART1_RX_PIN            PA10

src/main/target/PIKOBLX/target.h

@@ -51,7 +51,10 @@
 #define USE_UART1
 #define USE_UART2
 #define USE_UART3
-#define SERIAL_PORT_COUNT       4
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       6
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/RACEBASE/target.h

@@ -52,7 +52,10 @@
 #define USE_UART1
 #define USE_UART2
 #define USE_UART3
-#define SERIAL_PORT_COUNT       3
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       5
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/RCEXPLORERF3/target.h

@@ -64,7 +64,10 @@
 #define USE_UART1
 #define USE_UART2
 #define USE_UART3
-#define SERIAL_PORT_COUNT 4
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT 6
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/REVO/target.h

@@ -157,7 +157,10 @@
 #define UART6_RX_PIN            PC7
 #define UART6_TX_PIN            PC6
 
-#define SERIAL_PORT_COUNT       4 //VCP, USART1, USART3, USART6
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       6 //VCP, USART1, USART3, USART6, SOFTSERIAL x 2
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/REVONANO/target.h

@@ -64,7 +64,10 @@
 #define UART2_RX_PIN            PA3
 #define UART2_TX_PIN            PA2
 
-#define SERIAL_PORT_COUNT       3 
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       5
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 

src/main/target/RG_SSD_F3/target.h

@@ -85,7 +85,10 @@
 #define USE_UART3
 #define USE_UART4
 #define USE_UART5
-#define SERIAL_PORT_COUNT 6
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT 8
 
 #define UART1_TX_PIN             PC4
 #define UART1_RX_PIN             PC5

src/main/target/SINGULARITY/target.h

@@ -45,7 +45,9 @@
 #define USE_UART2          // Input - TX (NC) RX (PA15)
 #define USE_UART3          // Solder Pads - TX (PB10) RX (PB11)
 #define USE_SOFTSERIAL1     // Telemetry
-#define SERIAL_PORT_COUNT 5
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT 6
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/SIRINFPV/target.h

@@ -59,7 +59,10 @@
 #define USE_UART1
 #define USE_UART2
 #define USE_UART3
-#define SERIAL_PORT_COUNT       4
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       6
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/SPARKY/target.h

@@ -55,7 +55,11 @@
 #define USE_UART1 // Conn 1 - TX (PB6) RX PB7 (AF7)
 #define USE_UART2 // Input - RX (PA3)
 #define USE_UART3 // Servo out - 10/RX (PB11) 11/TX (PB10)
-#define SERIAL_PORT_COUNT       4
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       6
+
 #define AVOID_UART2_FOR_PWM_PPM
 
 #define USE_ESCSERIAL

src/main/target/SPARKY2/target.h

@@ -91,7 +91,10 @@
 #define UART6_RX_PIN            PC7
 #define UART6_TX_PIN            PC6 //inverter
 
-#define SERIAL_PORT_COUNT 4
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT 6
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/SPRACINGF3/target.h

@@ -126,15 +126,12 @@
 #define USE_UART1
 #define USE_UART2
 #define USE_UART3
-
-#if defined(ZCOREF3)
-#define SERIAL_PORT_COUNT       3
-
-#else
 #define USE_SOFTSERIAL1
 #define USE_SOFTSERIAL2
+
 #define SERIAL_PORT_COUNT       5
 
+#if !defined(ZCOREF3)
 #define SOFTSERIAL1_RX_PIN      PB4 // PWM 5
 #define SOFTSERIAL1_TX_PIN      PB5 // PWM 6
 

src/main/target/SPRACINGF3EVO/target.h

@@ -69,7 +69,10 @@
 #define USE_UART1
 #define USE_UART2
 #define USE_UART3
-#define SERIAL_PORT_COUNT       4
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       6
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/SPRACINGF3MINI/target.h

@@ -97,7 +97,8 @@
 #define SERIAL_PORT_COUNT       4
 #else
 #define USE_SOFTSERIAL1
-#define SERIAL_PORT_COUNT       5
+#define USE_SOFTSERIAL2
+#define SERIAL_PORT_COUNT       6
 #endif
 
 #define USE_ESCSERIAL

src/main/target/SPRACINGF3NEO/target.h

@@ -61,7 +61,9 @@
 #define USE_UART3
 #define USE_UART4
 #define USE_UART5
-#define SERIAL_PORT_COUNT       6
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+#define SERIAL_PORT_COUNT       8
 
 #define UART1_TX_PIN            PA9
 #define UART1_RX_PIN            PA10

src/main/target/STM32F3DISCOVERY/target.h

@@ -151,7 +151,10 @@
 #define USE_UART3
 #define USE_UART4
 #define USE_UART5
-#define SERIAL_PORT_COUNT       6
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       8
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/TINYFISH/target.h

@@ -48,14 +48,16 @@
   #define USE_VCP
   #define USB_IO
   #define USBD_PRODUCT_STRING "tinyFISH"
-  #define SERIAL_PORT_COUNT 4
+  #define SERIAL_PORT_COUNT 6
 #else
-  #define SERIAL_PORT_COUNT 3
+  #define SERIAL_PORT_COUNT 5
 #endif
 
 #define USE_UART1
 #define USE_UART2
 #define USE_UART3
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
 
 #define UART1_TX_PIN            PB6
 #define UART1_RX_PIN            PB7

src/main/target/VRRACE/target.h

@@ -118,7 +118,10 @@
 
 #define SOFTSERIAL1_RX_PIN      PE13 // PWM 3
 #define SOFTSERIAL1_TX_PIN      PE11 // PWM 2
-#define SERIAL_PORT_COUNT 6 //VCP, USART1, USART2, USART3, USART6, SOFTSERIAL1
+
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT 8 //VCP, USART1, USART2, USART3, USART6, SOFTSERIAL x 2
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/X_RACERSPI/target.h

@@ -54,7 +54,9 @@
 #define USE_UART2
 #define USE_UART3
 #define USE_SOFTSERIAL1
-#define SERIAL_PORT_COUNT       4
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       5
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/YUPIF4/target.h

@@ -81,7 +81,10 @@
 #define UART6_RX_PIN            PC7
 #define UART6_TX_PIN            PC6
 
-#define SERIAL_PORT_COUNT       4 // VCP, UART1, UART3, UART6
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       6 // VCP, UART1, UART3, UART6, SOFTSERIAL x 2
 
 #define USE_ESCSERIAL
 #define ESCSERIAL_TIMER_TX_HARDWARE 0 // PWM 1

src/main/target/common.h

@@ -71,10 +71,6 @@
 #define USE_PWM
 #define USE_PPM
 
-// Force two softserials (Individual target.h may turn these off)
-#define USE_SOFTSERIAL1
-#define USE_SOFTSERIAL2
-
 #if defined(STM32F4) || defined(STM32F7)
 #define TASK_GYROPID_DESIRED_PERIOD     125
 #define SCHEDULER_DELAY_LIMIT           10

src/main/target/common_post.h

@@ -26,62 +26,3 @@
 # undef VTX_SMARTAUDIO
 # undef VTX_TRAMP
 #endif
-
-// Forced config of USE_SOFTSERIAL{1,2} in common.h makes SERIAL_PORT_COUNT
-// defined in target.h invalid. Count them and re-define SERIAL_PORT_COUNT.
-#ifdef USE_VCP
-#  define N_VCP 1
-#else
-#  define N_VCP 0
-#endif
-
-#ifdef USE_UART1
-  #define N_UART1 1
-#else
-  #define N_UART1 0
-#endif
-
-#ifdef USE_UART2
-  #define N_UART2 1
-#else
-  #define N_UART2 0
-#endif
-
-#ifdef USE_UART3
-  #define N_UART3 1
-#else
-  #define N_UART3 0
-#endif
-
-#ifdef USE_UART4
-  #define N_UART4 1
-#else
-  #define N_UART4 0
-#endif
-
-#ifdef USE_UART5
-  #define N_UART5 1
-#else
-  #define N_UART5 0
-#endif
-
-#ifdef USE_UART6
-  #define N_UART6 1
-#else
-  #define N_UART6 0
-#endif
-
-#ifdef USE_SOFTSERIAL1
-  #define N_SSERIAL1 1
-#else
-  #define N_SSERIAL1 0
-#endif
-
-#ifdef USE_SOFTSERIAL2
-  #define N_SSERIAL2 1
-#else
-  #define N_SSERIAL2 0
-#endif
-
-#undef SERIAL_PORT_COUNT
-#define SERIAL_PORT_COUNT (N_VCP + N_UART1 + N_UART2 + N_UART3 + N_UART4 + N_UART5 + N_UART6 + N_SSERIAL1 + N_SSERIAL2)