mirror of
https://github.com/betaflight/betaflight.git
synced 2025-07-23 16:25:31 +03:00
Ported some I2C code from AQ32PlusF3 which itself looked ported from the
STM32 examples.
This commit is contained in:
Dominic Clifton
parent
8d9ce86a5a
commit
4febeb3969
12 changed files with 883 additions and 20 deletions
|
|
@ -12,27 +12,291 @@
|
|||
|
||||
#ifndef SOFT_I2C
|
||||
|
||||
#define I2C_SHORT_TIMEOUT ((uint32_t)0x1000)
|
||||
#define I2C_LONG_TIMEOUT ((uint32_t)(10 * I2C_SHORT_TIMEOUT))
|
||||
|
||||
|
||||
#define I2C1_SCL_GPIO GPIOB
|
||||
#define I2C1_SCL_PIN GPIO_Pin_6
|
||||
#define I2C1_SCL_PIN_SOURCE GPIO_PinSource6
|
||||
#define I2C1_SCL_CLK_SOURCE RCC_AHBPeriph_GPIOB
|
||||
#define I2C1_SDA_GPIO GPIOB
|
||||
#define I2C1_SDA_PIN GPIO_Pin_7
|
||||
#define I2C1_SDA_PIN_SOURCE GPIO_PinSource7
|
||||
#define I2C1_SDA_CLK_SOURCE RCC_AHBPeriph_GPIOB
|
||||
|
||||
#define I2C2_SCL_GPIO GPIOF
|
||||
#define I2C2_SCL_PIN GPIO_Pin_6
|
||||
#define I2C2_SCL_PIN_SOURCE GPIO_PinSource6
|
||||
#define I2C2_SCL_CLK_SOURCE RCC_AHBPeriph_GPIOF
|
||||
#define I2C2_SDA_GPIO GPIOA
|
||||
#define I2C2_SDA_PIN GPIO_Pin_10
|
||||
#define I2C2_SDA_PIN_SOURCE GPIO_PinSource10
|
||||
#define I2C2_SDA_CLK_SOURCE RCC_AHBPeriph_GPIOA
|
||||
|
||||
static uint32_t i2cTimeout;
|
||||
|
||||
static volatile uint16_t i2c1ErrorCount = 0;
|
||||
static volatile uint16_t i2c2ErrorCount = 0;
|
||||
|
||||
///////////////////////////////////////////////////////////////////////////////
|
||||
// I2C TimeoutUserCallback
|
||||
///////////////////////////////////////////////////////////////////////////////
|
||||
|
||||
uint32_t i2cTimeoutUserCallback(I2C_TypeDef *I2Cx)
|
||||
{
|
||||
if (I2Cx == I2C1)
|
||||
{
|
||||
i2c1ErrorCount++;
|
||||
}
|
||||
else
|
||||
{
|
||||
i2c2ErrorCount++;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
void i2cInitPort(I2C_TypeDef *I2Cx)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStructure;
|
||||
I2C_InitTypeDef I2C_InitStructure;
|
||||
|
||||
///////////////////////////////////
|
||||
|
||||
if (I2Cx == I2C1)
|
||||
{
|
||||
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOB, ENABLE);
|
||||
RCC_APB1PeriphClockCmd(RCC_APB1Periph_I2C1, ENABLE);
|
||||
RCC_AHBPeriphClockCmd(I2C1_SCL_CLK_SOURCE | I2C1_SDA_CLK_SOURCE, ENABLE);
|
||||
RCC_I2CCLKConfig(RCC_I2C1CLK_SYSCLK);
|
||||
|
||||
//i2cUnstick(I2Cx); // Clock out stuff to make sure slaves arent stuck
|
||||
|
||||
GPIO_PinAFConfig(I2C1_SCL_GPIO, I2C1_SCL_PIN_SOURCE, GPIO_AF_4);
|
||||
GPIO_PinAFConfig(I2C1_SDA_GPIO, I2C1_SDA_PIN_SOURCE, GPIO_AF_4);
|
||||
|
||||
GPIO_StructInit(&GPIO_InitStructure);
|
||||
I2C_StructInit(&I2C_InitStructure);
|
||||
|
||||
// Init pins
|
||||
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_InitStructure.GPIO_OType = GPIO_OType_OD;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
||||
|
||||
GPIO_InitStructure.GPIO_Pin = I2C1_SCL_PIN;
|
||||
GPIO_Init(I2C1_SCL_GPIO, &GPIO_InitStructure);
|
||||
|
||||
GPIO_InitStructure.GPIO_Pin = I2C1_SDA_PIN;
|
||||
GPIO_Init(I2C1_SDA_GPIO, &GPIO_InitStructure);
|
||||
|
||||
I2C_StructInit(&I2C_InitStructure);
|
||||
|
||||
I2C_InitStructure.I2C_Mode = I2C_Mode_I2C;
|
||||
I2C_InitStructure.I2C_AnalogFilter = I2C_AnalogFilter_Enable;
|
||||
I2C_InitStructure.I2C_DigitalFilter = 0x00;
|
||||
I2C_InitStructure.I2C_OwnAddress1 = 0x00;
|
||||
I2C_InitStructure.I2C_Ack = I2C_Ack_Enable;
|
||||
I2C_InitStructure.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit;
|
||||
I2C_InitStructure.I2C_Timing = 0x00E0257A; // 400 Khz, 72Mhz Clock, Analog Filter Delay ON, Rise 100, Fall 10.
|
||||
//I2C_InitStructure.I2C_Timing = 0x8000050B;
|
||||
|
||||
I2C_Init(I2C1, &I2C_InitStructure);
|
||||
|
||||
I2C_Cmd(I2C1, ENABLE);
|
||||
}
|
||||
|
||||
///////////////////////////////////
|
||||
|
||||
if (I2Cx == I2C2)
|
||||
{
|
||||
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOB, ENABLE);
|
||||
RCC_APB1PeriphClockCmd(RCC_APB1Periph_I2C2, ENABLE);
|
||||
RCC_AHBPeriphClockCmd(I2C2_SCL_CLK_SOURCE |I2C2_SDA_CLK_SOURCE, ENABLE);
|
||||
RCC_I2CCLKConfig(RCC_I2C2CLK_SYSCLK);
|
||||
|
||||
//i2cUnstick(I2Cx); // Clock out stuff to make sure slaves arent stuck
|
||||
|
||||
GPIO_PinAFConfig(I2C2_SCL_GPIO, I2C2_SCL_PIN_SOURCE, GPIO_AF_4);
|
||||
GPIO_PinAFConfig(I2C2_SDA_GPIO, I2C2_SDA_PIN_SOURCE, GPIO_AF_4);
|
||||
|
||||
GPIO_StructInit(&GPIO_InitStructure);
|
||||
I2C_StructInit(&I2C_InitStructure);
|
||||
|
||||
// Init pins
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_InitStructure.GPIO_OType = GPIO_OType_OD;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
||||
|
||||
GPIO_InitStructure.GPIO_Pin = I2C2_SCL_PIN;
|
||||
GPIO_Init(I2C2_SCL_GPIO, &GPIO_InitStructure);
|
||||
|
||||
GPIO_InitStructure.GPIO_Pin = I2C2_SDA_PIN;
|
||||
GPIO_Init(I2C2_SDA_GPIO, &GPIO_InitStructure);
|
||||
|
||||
I2C_StructInit(&I2C_InitStructure);
|
||||
|
||||
I2C_InitStructure.I2C_Mode = I2C_Mode_I2C;
|
||||
I2C_InitStructure.I2C_AnalogFilter = I2C_AnalogFilter_Enable;
|
||||
I2C_InitStructure.I2C_DigitalFilter = 0x00;
|
||||
I2C_InitStructure.I2C_OwnAddress1 = 0x00;
|
||||
I2C_InitStructure.I2C_Ack = I2C_Ack_Enable;
|
||||
I2C_InitStructure.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit;
|
||||
I2C_InitStructure.I2C_Timing = 0x00E0257A; // 400 Khz, 72Mhz Clock, Analog Filter Delay ON, Rise 100, Fall 10.
|
||||
//I2C_InitStructure.I2C_Timing = 0x8000050B;
|
||||
|
||||
I2C_Init(I2C2, &I2C_InitStructure);
|
||||
|
||||
I2C_Cmd(I2C2, ENABLE);
|
||||
}
|
||||
}
|
||||
|
||||
void i2cInit(I2C_TypeDef *I2C)
|
||||
{
|
||||
// FIXME implement
|
||||
i2cInitPort(I2C1);
|
||||
}
|
||||
|
||||
uint16_t i2cGetErrorCounter(void)
|
||||
{
|
||||
// FIXME implement
|
||||
return 0;
|
||||
return i2c1ErrorCount;
|
||||
}
|
||||
|
||||
bool i2cWrite(uint8_t addr_, uint8_t reg_, uint8_t data)
|
||||
bool i2cWrite(uint8_t addr_, uint8_t reg, uint8_t data)
|
||||
{
|
||||
// FIXME implement
|
||||
return false;
|
||||
I2C_TypeDef* I2Cx = I2C1;
|
||||
|
||||
/* Test on BUSY Flag */
|
||||
i2cTimeout = I2C_LONG_TIMEOUT;
|
||||
while(I2C_GetFlagStatus(I2Cx, I2C_ISR_BUSY) != RESET)
|
||||
{
|
||||
if((i2cTimeout--) == 0)
|
||||
return i2cTimeoutUserCallback(I2Cx);
|
||||
}
|
||||
|
||||
/* Configure slave address, nbytes, reload, end mode and start or stop generation */
|
||||
I2C_TransferHandling(I2Cx, addr_, 1, I2C_Reload_Mode, I2C_Generate_Start_Write);
|
||||
|
||||
/* Wait until TXIS flag is set */
|
||||
i2cTimeout = I2C_LONG_TIMEOUT;
|
||||
while(I2C_GetFlagStatus(I2Cx, I2C_ISR_TXIS) == RESET)
|
||||
{
|
||||
if((i2cTimeout--) == 0)
|
||||
return i2cTimeoutUserCallback(I2Cx);
|
||||
}
|
||||
|
||||
/* Send Register address */
|
||||
I2C_SendData(I2Cx, (uint8_t) reg);
|
||||
|
||||
/* Wait until TCR flag is set */
|
||||
i2cTimeout = I2C_LONG_TIMEOUT;
|
||||
while(I2C_GetFlagStatus(I2Cx, I2C_ISR_TCR) == RESET)
|
||||
{
|
||||
if((i2cTimeout--) == 0)
|
||||
return i2cTimeoutUserCallback(I2Cx);
|
||||
}
|
||||
|
||||
/* Configure slave address, nbytes, reload, end mode and start or stop generation */
|
||||
I2C_TransferHandling(I2Cx, addr_, 1, I2C_AutoEnd_Mode, I2C_No_StartStop);
|
||||
|
||||
/* Wait until TXIS flag is set */
|
||||
i2cTimeout = I2C_LONG_TIMEOUT;
|
||||
while(I2C_GetFlagStatus(I2Cx, I2C_ISR_TXIS) == RESET)
|
||||
{
|
||||
if((i2cTimeout--) == 0) return
|
||||
i2cTimeoutUserCallback(I2Cx);
|
||||
}
|
||||
|
||||
/* Write data to TXDR */
|
||||
I2C_SendData(I2Cx, data);
|
||||
|
||||
/* Wait until STOPF flag is set */
|
||||
i2cTimeout = I2C_LONG_TIMEOUT;
|
||||
while(I2C_GetFlagStatus(I2Cx, I2C_ISR_STOPF) == RESET)
|
||||
{
|
||||
if((i2cTimeout--) == 0) return i2cTimeoutUserCallback(I2Cx);
|
||||
}
|
||||
|
||||
/* Clear STOPF flag */
|
||||
I2C_ClearFlag(I2Cx, I2C_ICR_STOPCF);
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
bool i2cRead(uint8_t addr_, uint8_t reg_, uint8_t len, uint8_t* buf)
|
||||
bool i2cRead(uint8_t addr_, uint8_t reg, uint8_t len, uint8_t* buf)
|
||||
{
|
||||
// FIXME implement
|
||||
return false;
|
||||
I2C_TypeDef* I2Cx = I2C1;
|
||||
/* Test on BUSY Flag */
|
||||
i2cTimeout = I2C_LONG_TIMEOUT;
|
||||
while(I2C_GetFlagStatus(I2Cx, I2C_ISR_BUSY) != RESET)
|
||||
{
|
||||
if((i2cTimeout--) == 0)
|
||||
return i2cTimeoutUserCallback(I2Cx);
|
||||
}
|
||||
|
||||
/* Configure slave address, nbytes, reload, end mode and start or stop generation */
|
||||
I2C_TransferHandling(I2Cx, addr_, 1, I2C_SoftEnd_Mode, I2C_Generate_Start_Write);
|
||||
|
||||
/* Wait until TXIS flag is set */
|
||||
i2cTimeout = I2C_LONG_TIMEOUT;
|
||||
while(I2C_GetFlagStatus(I2Cx, I2C_ISR_TXIS) == RESET)
|
||||
{
|
||||
if((i2cTimeout--) == 0)
|
||||
return i2cTimeoutUserCallback(I2Cx);
|
||||
}
|
||||
|
||||
if(len > 1)
|
||||
reg |= 0x80;
|
||||
|
||||
/* Send Register address */
|
||||
I2C_SendData(I2Cx, (uint8_t)reg);
|
||||
|
||||
/* Wait until TC flag is set */
|
||||
i2cTimeout = I2C_LONG_TIMEOUT;
|
||||
while(I2C_GetFlagStatus(I2Cx, I2C_ISR_TC) == RESET)
|
||||
{
|
||||
if((i2cTimeout--) == 0)
|
||||
return i2cTimeoutUserCallback(I2Cx);
|
||||
}
|
||||
|
||||
/* Configure slave address, nbytes, reload, end mode and start or stop generation */
|
||||
I2C_TransferHandling(I2Cx, addr_, len, I2C_AutoEnd_Mode, I2C_Generate_Start_Read);
|
||||
|
||||
/* Wait until all data are received */
|
||||
while (len)
|
||||
{
|
||||
/* Wait until RXNE flag is set */
|
||||
i2cTimeout = I2C_LONG_TIMEOUT;
|
||||
while(I2C_GetFlagStatus(I2Cx, I2C_ISR_RXNE) == RESET)
|
||||
{
|
||||
if((i2cTimeout--) == 0)
|
||||
return i2cTimeoutUserCallback(I2Cx);
|
||||
}
|
||||
|
||||
/* Read data from RXDR */
|
||||
*buf = I2C_ReceiveData(I2Cx);
|
||||
/* Point to the next location where the byte read will be saved */
|
||||
buf++;
|
||||
|
||||
/* Decrement the read bytes counter */
|
||||
len--;
|
||||
}
|
||||
|
||||
/* Wait until STOPF flag is set */
|
||||
i2cTimeout = I2C_LONG_TIMEOUT;
|
||||
while(I2C_GetFlagStatus(I2Cx, I2C_ISR_STOPF) == RESET)
|
||||
{
|
||||
if((i2cTimeout--) == 0) return
|
||||
i2cTimeoutUserCallback(I2Cx);
|
||||
}
|
||||
|
||||
/* Clear STOPF flag */
|
||||
I2C_ClearFlag(I2Cx, I2C_ICR_STOPCF);
|
||||
|
||||
/* If all operations OK */
|
||||
return true;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue