Mirror/betaflight
1
0
Fork 0
mirror of https://github.com/betaflight/betaflight.git synced 2025-07-23 16:25:31 +03:00
Code Issues Wiki Activity

Merge pull request #6176 from Scavanger/Add-single-wire-in-HoTT-Doc

Browse source 
Added a hint of the HoTT single wire connection in Documentaion
This commit is contained in:
Michael Keller 2018-06-20 20:41:06 +12:00 • committed by GitHub
commit 6acbed6d6e
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 9 additions and 1 deletions
Download patch file Download diff file Expand all files Collapse all files

10
docs/Telemetry.md
View file

@ -107,7 +107,10 @@ Use the latest Graupner firmware for your transmitter and receiver.
Older HoTT transmitters required the EAM and GPS modules to be enabled in the telemetry menu of the transmitter. (e.g. on MX-20) Older HoTT transmitters required the EAM and GPS modules to be enabled in the telemetry menu of the transmitter. (e.g. on MX-20)
Serial ports use two wires but HoTT uses a single wire so some electronics are required so that the signals don't get mixed up. The TX and RX pins of You can connect HoTT-Telemetry in two ways:
#### Old way:
Serial ports use two wires but HoTT uses a single wire so some electronics are required so that the signals don't get mixed up. The TX and RX pins of
a serial port should be connected using a diode and a single wire to the `T` port on a HoTT receiver. a serial port should be connected using a diode and a single wire to the `T` port on a HoTT receiver.
Connect as follows: Connect as follows:
@ -122,6 +125,11 @@ The diode should be arranged to allow the data signals to flow the right way
``` ```
1N4148 diodes have been tested and work with the GR-24. 1N4148 diodes have been tested and work with the GR-24.
When using the diode disable `tlm_halfduplex`, go to CLI and type `set tlm_halfduplex = OFF`, don't forget a `save` afterwards.
#### New way:
You can use a single connection, connect HoTT RX/TX only to serial TX, leave serial RX open and make sure `tlm_halfduplex` is ON.
As noticed by Skrebber the GR-12 (and probably GR-16/24, too) are based on a PIC 24FJ64GA-002, which has 5V tolerant digital pins. As noticed by Skrebber the GR-12 (and probably GR-16/24, too) are based on a PIC 24FJ64GA-002, which has 5V tolerant digital pins.