Mirror/betaflight
1
0
Fork 0
mirror of https://github.com/betaflight/betaflight.git synced 2025-07-15 20:35:33 +03:00
Code Issues Wiki Activity

moving a few items into the same ifdef statement so they are more easily located and readable

Browse source
This commit is contained in:
blckmn 2016-10-03 07:43:30 +11:00
parent 1a9bc4de47
commit 6ec95475fc
2 changed files with 11 additions and 15 deletions
Download patch file Download diff file Expand all files Collapse all files

14
src/main/config/config_master.h
View file

@ -132,6 +132,7 @@ typedef struct master_s {
#ifdef GPS
gpsProfile_t gpsProfile;
gpsConfig_t gpsConfig;
#endif
uint16_t max_angle_inclination; // max inclination allowed in angle (level) mode. default 500 (50 degrees).
@ -151,10 +152,6 @@ typedef struct master_s {
mixerConfig_t mixerConfig;
airplaneConfig_t airplaneConfig;
#ifdef GPS
gpsConfig_t gpsConfig;
#endif
failsafeConfig_t failsafeConfig;
serialConfig_t serialConfig;
telemetryConfig_t telemetryConfig;
@ -205,11 +202,14 @@ typedef struct master_s {
uint32_t beeper_off_flags;
uint32_t preferred_beeper_off_flags;
uint8_t magic_ef; // magic number, should be 0xEF
uint8_t chk; // XOR checksum
char name[MAX_NAME_LENGTH + 1];
uint8_t magic_ef; // magic number, should be 0xEF
uint8_t chk; // XOR checksum
/*
do not add properties after the CHK
as it is assumed to exist at length-1
*/
} master_t;
extern master_t masterConfig;

10
src/main/io/serial_cli.c
View file

@ -693,9 +693,6 @@ const clivalue_t valueTable[] = {
{ "max_throttle", VAR_UINT16 | MASTER_VALUE, &masterConfig.motorConfig.maxthrottle, .config.minmax = { PWM_RANGE_ZERO, PWM_RANGE_MAX } },
{ "min_command", VAR_UINT16 | MASTER_VALUE, &masterConfig.motorConfig.mincommand, .config.minmax = { PWM_RANGE_ZERO, PWM_RANGE_MAX } },
{ "max_esc_throttle_jump", VAR_UINT16 | MASTER_VALUE, &masterConfig.motorConfig.maxEscThrottleJumpMs, .config.minmax = { 0, 1000 } },
#ifdef USE_SERVOS
{ "servo_center_pulse", VAR_UINT16 | MASTER_VALUE, &masterConfig.servoConfig.servoCenterPulse, .config.minmax = { PWM_RANGE_ZERO, PWM_RANGE_MAX } },
#endif
{ "3d_deadband_low", VAR_UINT16 | MASTER_VALUE, &masterConfig.flight3DConfig.deadband3d_low, .config.minmax = { PWM_RANGE_ZERO, PWM_RANGE_MAX } }, // FIXME upper limit should match code in the mixer, 1500 currently
{ "3d_deadband_high", VAR_UINT16 | MASTER_VALUE, &masterConfig.flight3DConfig.deadband3d_high, .config.minmax = { PWM_RANGE_ZERO, PWM_RANGE_MAX } }, // FIXME lower limit should match code in the mixer, 1500 currently,
@ -816,11 +813,14 @@ const clivalue_t valueTable[] = {
{ "yaw_motor_direction", VAR_INT8 | MASTER_VALUE, &masterConfig.mixerConfig.yaw_motor_direction, .config.minmax = { -1, 1 } },
{ "yaw_p_limit", VAR_UINT16 | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.yaw_p_limit, .config.minmax = { YAW_P_LIMIT_MIN, YAW_P_LIMIT_MAX } },
#ifdef USE_SERVOS
{ "servo_center_pulse", VAR_UINT16 | MASTER_VALUE, &masterConfig.servoConfig.servoCenterPulse, .config.minmax = { PWM_RANGE_ZERO, PWM_RANGE_MAX } },
{ "tri_unarmed_servo", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, &masterConfig.mixerConfig.tri_unarmed_servo, .config.lookup = { TABLE_OFF_ON } },
{ "servo_lowpass_freq", VAR_UINT16 | MASTER_VALUE, &masterConfig.mixerConfig.servo_lowpass_freq, .config.minmax = { 10, 400} },
{ "servo_lowpass_enable", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, &masterConfig.mixerConfig.servo_lowpass_enable, .config.lookup = { TABLE_OFF_ON } },
{ "servo_pwm_rate", VAR_UINT16 | MASTER_VALUE, &masterConfig.servoConfig.servoPwmRate, .config.minmax = { 50, 498 } },
{ "gimbal_mode", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &masterConfig.gimbalConfig.mode, .config.lookup = { TABLE_GIMBAL_MODE } },
#endif
{ "rc_rate", VAR_UINT8 | PROFILE_RATE_VALUE, &masterConfig.profile[0].controlRateProfile[0].rcRate8, .config.minmax = { 0, 255 } },
@ -846,10 +846,6 @@ const clivalue_t valueTable[] = {
{ "rx_min_usec", VAR_UINT16 | MASTER_VALUE, &masterConfig.rxConfig.rx_min_usec, .config.minmax = { PWM_PULSE_MIN, PWM_PULSE_MAX } },
{ "rx_max_usec", VAR_UINT16 | MASTER_VALUE, &masterConfig.rxConfig.rx_max_usec, .config.minmax = { PWM_PULSE_MIN, PWM_PULSE_MAX } },
#ifdef USE_SERVOS
{ "gimbal_mode", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &masterConfig.gimbalConfig.mode, .config.lookup = { TABLE_GIMBAL_MODE } },
#endif
{ "acc_hardware", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &masterConfig.acc_hardware, .config.lookup = { TABLE_ACC_HARDWARE } },
{ "acc_lpf_hz", VAR_UINT16 | MASTER_VALUE, &masterConfig.acc_lpf_hz, .config.minmax = { 0, 400 } },
{ "accxy_deadband", VAR_UINT8 | MASTER_VALUE, &masterConfig.accDeadband.xy, .config.minmax = { 0, 100 } },