Mirror/betaflight
1
0
Fork 0
mirror of https://github.com/betaflight/betaflight.git synced 2025-07-24 00:35:39 +03:00
Code Issues Wiki Activity

Preparation for conversion to parameter groups

Browse source
This commit is contained in:
Martin Budden 2017-01-24 19:42:29 +00:00
parent 6f872ba899
commit 79d4b2146d
90 changed files with 1150 additions and 507 deletions
Download patch file Download diff file Expand all files Collapse all files

18
src/main/fc/config.c
View file

@ -951,7 +951,7 @@ void activateConfig(void)
void validateAndFixConfig(void)
{
if((motorConfig()->motorPwmProtocol == PWM_TYPE_BRUSHED) && (motorConfig()->mincommand < 1000)){
motorConfig()->mincommand = 1000;
motorConfigMutable()->mincommand = 1000;
}
if (!(featureConfigured(FEATURE_RX_PARALLEL_PWM) || featureConfigured(FEATURE_RX_PPM) || featureConfigured(FEATURE_RX_SERIAL) || featureConfigured(FEATURE_RX_MSP) || featureConfigured(FEATURE_RX_SPI))) {
@ -1064,18 +1064,18 @@ void validateAndFixGyroConfig(void)
{
// Prevent invalid notch cutoff
if (gyroConfig()->gyro_soft_notch_cutoff_1 >= gyroConfig()->gyro_soft_notch_hz_1) {
gyroConfig()->gyro_soft_notch_hz_1 = 0;
gyroConfigMutable()->gyro_soft_notch_hz_1 = 0;
}
if (gyroConfig()->gyro_soft_notch_cutoff_2 >= gyroConfig()->gyro_soft_notch_hz_2) {
gyroConfig()->gyro_soft_notch_hz_2 = 0;
gyroConfigMutable()->gyro_soft_notch_hz_2 = 0;
}
float samplingTime = 0.000125f;
if (gyroConfig()->gyro_lpf != GYRO_LPF_256HZ && gyroConfig()->gyro_lpf != GYRO_LPF_NONE) {
pidConfig()->pid_process_denom = 1; // When gyro set to 1khz always set pid speed 1:1 to sampling speed
gyroConfig()->gyro_sync_denom = 1;
gyroConfig()->gyro_use_32khz = false;
pidConfigMutable()->pid_process_denom = 1; // When gyro set to 1khz always set pid speed 1:1 to sampling speed
gyroConfigMutable()->gyro_sync_denom = 1;
gyroConfigMutable()->gyro_use_32khz = false;
samplingTime = 0.001f;
}
@ -1094,7 +1094,7 @@ void validateAndFixGyroConfig(void)
}
#if !defined(GYRO_USES_SPI) || !defined(USE_MPU_DATA_READY_SIGNAL)
gyroConfig()->gyro_isr_update = false;
gyroConfigMutable()->gyro_isr_update = false;
#endif
// check for looptime restrictions based on motor protocol. Motor times have safety margin
@ -1123,14 +1123,14 @@ void validateAndFixGyroConfig(void)
}
if(pidLooptime < motorUpdateRestriction)
pidConfig()->pid_process_denom = motorUpdateRestriction / (samplingTime * gyroConfig()->gyro_sync_denom);
pidConfigMutable()->pid_process_denom = motorUpdateRestriction / (samplingTime * gyroConfig()->gyro_sync_denom);
// Prevent overriding the max rate of motors
if(motorConfig()->useUnsyncedPwm && (motorConfig()->motorPwmProtocol <= PWM_TYPE_BRUSHED)) {
uint32_t maxEscRate = lrintf(1.0f / motorUpdateRestriction);
if(motorConfig()->motorPwmRate > maxEscRate)
motorConfig()->motorPwmRate = maxEscRate;
motorConfigMutable()->motorPwmRate = maxEscRate;
}
}