Adding PIKOF4OSD to PIKOF4 target

src/main/target/FF_PIKOF4/target.c

@@ -25,9 +25,18 @@
 #include "drivers/timer_def.h"
 
 const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
-    DEF_TIM(TIM2, CH4, PA3, TIM_USE_MOTOR, 0, 1 ), // S3_OUT - DMA1_ST6
+#if defined(FF_PIKOF4OSD)
-    DEF_TIM(TIM3, CH3, PB0, TIM_USE_MOTOR, 0, 0 ), // S1_OUT - DMA1_ST7
+    DEF_TIM(TIM5, CH4, PA3, TIM_USE_MOTOR, 0, 0 ), // S1_OUT - DMA1_ST7
-    DEF_TIM(TIM2, CH3, PA2, TIM_USE_MOTOR, 0, 0 ), // S4_OUT - DMA1_ST1
+    DEF_TIM(TIM3, CH3, PB1, TIM_USE_MOTOR, 0, 0 ), // S2_OUT - DMA1_ST1
-    DEF_TIM(TIM3, CH4, PB1, TIM_USE_MOTOR, 0, 0 ), // S2_OUT - DMA1_ST2
+    DEF_TIM(TIM5, CH3, PA2, TIM_USE_MOTOR, 0, 0 ), // S3_OUT - DMA1_ST6
+    DEF_TIM(TIM3, CH4, PB0, TIM_USE_MOTOR, 0, 0 ), // S4_OUT - DMA1_ST2
+    DEF_TIM(TIM8, CH2N, PB14, TIM_USE_MOTOR, 0, 0 ), // PA14 RC4  - DMA2_ST6, *DMA2_ST2
+    DEF_TIM(TIM1, CH3N, PB15, TIM_USE_MOTOR, 0, 0 ), // PA15 RC5  - DMA2_ST6, DMA2_ST6
+#else
+    DEF_TIM(TIM2, CH4, PA3, TIM_USE_MOTOR, 0, 1 ), // S1_OUT - DMA1_ST6
+    DEF_TIM(TIM3, CH3, PB0, TIM_USE_MOTOR, 0, 0 ), // S2_OUT - DMA1_ST7
+    DEF_TIM(TIM2, CH3, PA2, TIM_USE_MOTOR, 0, 0 ), // S3_OUT - DMA1_ST1
+    DEF_TIM(TIM3, CH4, PB1, TIM_USE_MOTOR, 0, 0 ), // S4_OUT - DMA1_ST2
+#endif
     DEF_TIM(TIM4, CH2, PB7, TIM_USE_LED,   0, 0 ), // LED    - DMA1_ST3
 };

src/main/target/FF_PIKOF4/target.h

@@ -16,12 +16,22 @@
  */
 
 #pragma once
+#if defined(FF_PIKOF4OSD)
+#define TARGET_BOARD_IDENTIFIER "PKOS"
+#define USBD_PRODUCT_STRING     "PikoF4OSD"
+#else
 #define TARGET_BOARD_IDENTIFIER "PIK4"
 #define USBD_PRODUCT_STRING     "PikoF4"
+#endif
 #define USE_TARGET_CONFIG
 /*--------------LED----------------*/
+#if defined(FF_PIKOF4OSD)
+#define LED0_PIN                PB5
+#define LED1_PIN                PB4
+#else
 #define LED0_PIN                PA15
 #define LED1_PIN                PB6
+#endif
 /*---------------------------------*/
 
 /*------------BEEPER---------------*/
@@ -29,6 +39,10 @@
 #define BEEPER_INVERTED
 /*---------------------------------*/
 
+/*----------CAMERA CONTROL---------*/
+// #define CAMERA_CONTROL_PIN      PB7
+/*---------------------------------*/
+
 /*------------SENSORS--------------*/
 // MPU interrupt
 #define USE_EXTI
@@ -37,40 +51,45 @@
 #define USE_MPU_DATA_READY_SIGNAL
 #define ENSURE_MPU_DATA_READY_IS_LOW
 
+#if defined(FF_PIKOF4OSD)
+#define MPU6000_CS_PIN          PA15
+#define MPU6000_SPI_INSTANCE    SPI3
+
+#define MPU6500_CS_PIN          PA15
+#define MPU6500_SPI_INSTANCE    SPI3
+#else
 #define MPU6000_CS_PIN          PA4
 #define MPU6000_SPI_INSTANCE    SPI1
 
 #define MPU6500_CS_PIN          PA4
 #define MPU6500_SPI_INSTANCE    SPI1
-
+#endif
-#define ICM20689_CS_PIN         PA4
-#define ICM20689_SPI_INSTANCE   SPI1
 
 #define USE_GYRO
-#define USE_GYRO_SPI_ICM20689
-#define GYRO_ICM20689_ALIGN     CW180_DEG
-
 #define USE_GYRO_SPI_MPU6000
 #define GYRO_MPU6000_ALIGN      CW180_DEG
-#define USE_ACC_SPI_MPU6000
-#define ACC_MPU6000_ALIGN       CW180_DEG
 
-#define USE_GYRO_MPU6500
 #define USE_GYRO_SPI_MPU6500
 #define GYRO_MPU6500_ALIGN      CW180_DEG
 
 #define USE_ACC
-#define USE_ACC_SPI_ICM20689
-#define ACC_ICM20689_ALIGN      CW180_DEG
-
 #define USE_ACC_SPI_MPU6000
 #define ACC_MPU6000_ALIGN       CW180_DEG
 
-#define USE_ACC_MPU6500
 #define USE_ACC_SPI_MPU6500
 #define ACC_MPU6500_ALIGN       CW180_DEG
 /*---------------------------------*/
 
+#if defined(FF_PIKOF4OSD)
+/*-------------OSD-----------------*/
+#define USE_OSD
+#define USE_MAX7456
+#define MAX7456_SPI_INSTANCE    SPI1
+#define MAX7456_SPI_CS_PIN      PA4
+#define MAX7456_SPI_CLK         (SPI_CLOCK_STANDARD) // 10MHz
+#define MAX7456_RESTORE_CLK     (SPI_CLOCK_FAST)
+/*---------------------------------*/
+#else
 /*------------FLASH----------------*/
 #define M25P16_CS_PIN           PB3
 #define M25P16_SPI_INSTANCE     SPI3
@@ -78,6 +97,7 @@
 #define USE_FLASHFS
 #define USE_FLASH_M25P16
 /*---------------------------------*/
+#endif
 
 /*-----------USB-UARTs-------------*/
 #define USE_VCP
@@ -91,13 +111,22 @@
 #define USE_UART3
 #define UART3_RX_PIN            PB11
 #define UART3_TX_PIN            PB10
+#if defined(FF_PIKOF4OSD)
+#define INVERTER_PIN_UART3      PC3
+#else
 #define INVERTER_PIN_UART3      PC8
+#endif
+
+#define USE_UART4
+#define UART4_TX_PIN            PA0
+#define UART4_RX_PIN            PA1
 
 #define USE_UART6
 #define UART6_RX_PIN            PC7
 #define UART6_TX_PIN            PC6
 
-#define SERIAL_PORT_COUNT       4
+#define SERIAL_PORT_COUNT       5
+
 
 /*---------------------------------*/
 
@@ -111,7 +140,11 @@
 #define SPI1_MOSI_PIN           PA7
 
 #define USE_SPI_DEVICE_3
+#if defined(FF_PIKOF4OSD)
+#define SPI3_NSS_PIN            PA15
+#else
 #define SPI3_NSS_PIN            PB3
+#endif
 #define SPI3_SCK_PIN            PC10
 #define SPI3_MISO_PIN           PC11
 #define SPI3_MOSI_PIN           PC12
@@ -121,6 +154,11 @@
 #define USE_ADC
 #define DEFAULT_VOLTAGE_METER_SOURCE    VOLTAGE_METER_ADC
 #define VBAT_ADC_PIN                    PC2
+#if defined(FF_PIKOF4OSD)
+#define DEFAULT_CURRENT_METER_SOURCE    CURRENT_METER_ADC
+#define CURRENT_METER_ADC_PIN           PC1
+#define CURRENT_METER_SCALE_DEFAULT     250
+#endif
 /*---------------------------------*/
 
 /*-------------ESCs----------------*/
@@ -132,6 +170,9 @@
 
 /*--------DEFAULT VALUES-----------*/
 #define DEFAULT_RX_FEATURE      FEATURE_RX_SERIAL
+#if defined(FF_PIKOF4OSD)
+#define DEFAULT_FEATURES        ( FEATURE_TELEMETRY | FEATURE_OSD )
+#endif
 #define SERIALRX_PROVIDER       SERIALRX_SBUS
 #define SERIALRX_UART           SERIAL_PORT_USART3
 
@@ -142,6 +183,11 @@
 /*---------------------------------*/
 
 /*--------------TIMERS-------------*/
+#if defined(FF_PIKOF4OSD)
+#define USABLE_TIMER_CHANNEL_COUNT  7
+#define USED_TIMERS             ( TIM_N(1) | TIM_N(3) | TIM_N(5) | TIM_N(8) )
+#else
 #define USABLE_TIMER_CHANNEL_COUNT  5
 #define USED_TIMERS             ( TIM_N(2) | TIM_N(3) | TIM_N(4) )
+#endif
 /*---------------------------------*/

src/main/target/FF_PIKOF4/target.mk

@@ -5,4 +5,5 @@ TARGET_SRC = \
             drivers/accgyro/accgyro_spi_mpu6000.c \
             drivers/accgyro/accgyro_mpu6500.c \
             drivers/accgyro/accgyro_spi_mpu6500.c \
-            drivers/accgyro/accgyro_spi_icm20689.c
+            drivers/accgyro/accgyro_spi_icm20689.c \
+            drivers/max7456.c