Mirror/betaflight
1
0
Fork 0
mirror of https://github.com/betaflight/betaflight.git synced 2025-07-24 08:45:36 +03:00
Code Issues Wiki Activity

Merge pull request #868 from SteveAmor/document_servo_low_pass_filter_Cli.md

Browse source 
Added servo low pass filtering to Cli.md
This commit is contained in:
Dominic Clifton 2015-05-17 21:36:56 +01:00
commit 8427583ba8
1 changed files with 2 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

2
docs/Cli.md
View file

@ -119,6 +119,8 @@ Re-apply any new defaults as desired.
| 3d_deadband_throttle | | 0 | 2000 | 50 | Master | UINT16 |
| motor_pwm_rate | Output frequency (in Hz) for motor pins. Defaults are 400Hz for motor. If setting above 500Hz, will switch to brushed (direct drive) motors mode. For example, setting to 8000 will use brushed mode at 8kHz switching frequency. Up to 32kHz is supported. Note, that in brushed mode, minthrottle is offset to zero. Default is 16000 for boards with brushed motors. | 50 | 32000 | 400 | Master | UINT16 |
| servo_pwm_rate | Output frequency (in Hz) servo pins. Default is 50Hz. When using tricopters or gimbal with digital servo, this rate can be increased. Max of 498Hz (for 500Hz pwm period), and min of 50Hz. Most digital servos will support for example 330Hz. | 50 | 498 | 50 | Master | UINT16 |
| servo_lowpass_freq | Selects the servo PWM output cutoff frequency. Valid values range from 10 to 400. This is a fraction of the loop frequency in 1/1000ths. For example, `40` means `0.040`. The cutoff frequency can be determined by the following formula: `Frequency = 1000 * servo_lowpass_freq / looptime` | 10 | 400 | 400 | Master | INT16 |
| servo_lowpass_enable | Disabled by default. | 0 | 1 | 0 | Master | INT8 |
| retarded_arm | Disabled by default, enabling (setting to 1) allows disarming by throttle low + roll. This could be useful for mode-1 users and non-acro tricopters, where default arming by yaw could move tail servo too much. | 0 | 1 | 0 | Master | UINT8 |
| disarm_kill_switch | Enabled by default. Disarms the motors independently of throttle value. Setting to 0 reverts to the old behaviour of disarming only when the throttle is low. Only applies when arming and disarming with an AUX channel. | 0 | 1 | 1 | Master | UINT8 |
| auto_disarm_delay | | 0 | 60 | 5 | Master | UINT8 |