From 862169807f99a20ced17ac5c10a31024715fec1f Mon Sep 17 00:00:00 2001 From: DaTwo Date: Tue, 5 May 2015 08:09:16 -0700 Subject: [PATCH] Update Cli.md Updated CLI command in docs. --- docs/Cli.md | 1 + 1 file changed, 1 insertion(+) diff --git a/docs/Cli.md b/docs/Cli.md index 05ab6c828c..fe0116f6ee 100644 --- a/docs/Cli.md +++ b/docs/Cli.md @@ -107,6 +107,7 @@ Re-apply any new defaults as desired. | max_check | These are min/max values (in us) which, when a channel is smaller (min) or larger (max) than the value will activate various RC commands, such as arming, or stick configuration. Normally, every RC channel should be set so that min = 1000us, max = 2000us. On most transmitters this usually means 125% endpoints. Default check values are 100us above/below this value. | 0 | 2000 | 1900 | Master | UINT16 | | rssi_channel | | 0 | 18 | 0 | Master | INT8 | | rssi_scale | | 1 | 255 | 30 | Master | UINT8 | +| rssi_ppm_invert | | 0 | 1 | 0 | Master | UINT8 | | input_filtering_mode | | 0 | 1 | 0 | Master | INT8 | | min_throttle | These are min/max values (in us) that are sent to esc when armed. Defaults of 1150/1850 are OK for everyone, for use with AfroESC, they could be set to 1064/1864. | 0 | 2000 | 1150 | Master | UINT16 | | max_throttle | These are min/max values (in us) that are sent to esc when armed. Defaults of 1150/1850 are OK for everyone, for use with AfroESC, they could be set to 1064/1864. | 0 | 2000 | 1850 | Master | UINT16 |