diff --git a/mk/source.mk b/mk/source.mk
index 90a7cda738..7f11435093 100644
--- a/mk/source.mk
+++ b/mk/source.mk
@@ -313,6 +313,7 @@ COMMON_SRC += \
             drivers/barometer/barometer_bmp388.c \
             drivers/barometer/barometer_dps310.c \
             drivers/barometer/barometer_lps22df.c \
+            drivers/barometer/barometer_lps22h.c \
             drivers/barometer/barometer_lps.c \
             drivers/barometer/barometer_ms5611.c \
             drivers/barometer/barometer_qmp6988.c \
diff --git a/src/main/cli/settings.c b/src/main/cli/settings.c
index 9e6c0ddbf2..5e76d3072a 100644
--- a/src/main/cli/settings.c
+++ b/src/main/cli/settings.c
@@ -199,7 +199,7 @@ const char * const lookupTableGyroHardware[] = {
 #if defined(USE_SENSOR_NAMES) || defined(USE_BARO)
 // sync with baroSensor_e
 const char * const lookupTableBaroHardware[] = {
-    "AUTO", "NONE", "BMP085", "MS5611", "BMP280", "LPS", "QMP6988", "BMP388", "DPS310", "2SMPB_02B", "LPS22DF", "VIRTUAL"
+    "AUTO", "NONE", "BMP085", "MS5611", "BMP280", "LPS", "QMP6988", "BMP388", "DPS310", "2SMPB_02B", "LPS22DF", "LPS22H", "VIRTUAL"
 };
 #endif
 #if defined(USE_SENSOR_NAMES) || defined(USE_MAG)
diff --git a/src/main/drivers/barometer/barometer_lps22h.c b/src/main/drivers/barometer/barometer_lps22h.c
new file mode 100644
index 0000000000..fb92e14746
--- /dev/null
+++ b/src/main/drivers/barometer/barometer_lps22h.c
@@ -0,0 +1,413 @@
+/*
+ * This file is part of Betaflight.
+ *
+ * Betaflight is free software. You can redistribute this software
+ * and/or modify this software under the terms of the GNU General
+ * Public License as published by the Free Software Foundation,
+ * either version 3 of the License, or (at your option) any later
+ * version.
+ *
+ * Betaflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdbool.h>
+#include <stdint.h>
+
+#include "platform.h"
+
+#include "build/build_config.h"
+#include "build/debug.h"
+
+#include "barometer.h"
+
+#include "drivers/bus.h"
+#include "drivers/bus_i2c.h"
+#include "drivers/bus_i2c_busdev.h"
+#include "drivers/bus_spi.h"
+#include "drivers/io.h"
+#include "drivers/time.h"
+
+#include "barometer_lps22h.h"
+
+
+// 10 MHz max SPI frequency
+#define LPS22H_MAX_SPI_CLK_HZ 10000000
+
+#if defined(USE_BARO) && (defined(USE_BARO_LPS22H) || defined(USE_BARO_SPI_LPS22H))
+
+/* See datasheet
+ *
+ *     https://www.st.com/resource/en/datasheet/lps22hb.pdf
+ */
+
+// Macros to encode/decode multi-bit values
+#define LPS22H_ENCODE_BITS(val, mask, shift)   ((val << shift) & mask)
+#define LPS22H_DECODE_BITS(val, mask, shift)   ((val & mask) >> shift)
+
+// RESERVED - 00-0A
+
+// Interrupt mode for pressure acquisition configuration (R/W)
+#define LPS22H_INTERRUPT_CFG               0x0B
+#define LPS22H_INTERRUPT_CFG_AUTOREFP                  0x80
+#define LPS22H_INTERRUPT_CFG_RESET_ARP                 0x40
+#define LPS22H_INTERRUPT_CFG_AUTOZERO                  0x20
+#define LPS22H_INTERRUPT_CFG_RESET_AZ                  0x10
+#define LPS22H_INTERRUPT_CFG_LIR                       0x04
+#define LPS22H_INTERRUPT_CFG_PLE                       0x02
+#define LPS22H_INTERRUPT_CFG_PHE                       0x01
+
+// Threshold value for pressure interrupt event (least significant bits) (R/W)
+#define LPS22H_THS_P_L                     0x0C
+#define LPS22H_THS_P_H                     0x0D
+
+
+// Device Who am I (R)
+#define LPS22H_WHO_AM_I                    0x0F
+#define LPS22HB_CHIP_ID                     0xB1 // LPS22HB
+#define LPS22HH_CHIP_ID                     0xB3 // LPS22HH
+
+// Control register 1 (R/W)
+#define LPS22H_CTRL_REG1                   0x10
+#define LPS22H_CTRL_REG1_ODR_MASK               0x70 // bits 4-6
+#define LPS22H_CTRL_REG1_ODR_SHIFT              4
+#define LPS22H_CTRL_REG1_ODR_POWER_DOWN         0
+#define LPS22H_CTRL_REG1_ODR_1HZ                1
+#define LPS22H_CTRL_REG1_ODR_10HZ               2
+#define LPS22H_CTRL_REG1_ODR_25HZ               3
+#define LPS22H_CTRL_REG1_ODR_50HZ               4
+#define LPS22H_CTRL_REG1_ODR_75HZ               5
+
+#define LPS22H_CTRL_REG1_BDU                    0x02
+#define LPS22H_CTRL_REG1_SIM                    0x01
+
+// Control register 2 (R/W)
+#define LPS22H_CTRL_REG2                   0x11
+#define LPS22H_CTRL_REG2_BOOT                   0x80
+#define LPS22H_CTRL_REG2_FIFO_EN                0x40 
+#define LPS22H_CTRL_REG2_STOP_ON_FTH            0x20
+#define LPS22H_CTRL_REG2_IF_ADD_INC             0x10
+#define LPS22H_CTRL_REG2_I2C_DIS                0x08
+#define LPS22H_CTRL_REG2_SWRESET                0x04 
+#define LPS22H_CTRL_REG2_ONE_SHOT               0x01 
+
+
+// Reference pressure LSB data (R)
+#define LPS22H_REF_P_L                     0x16
+#define LPS22H_REF_P_H                     0x17
+
+
+// Pressure offset (R/W)
+#define LPS22H_RPDS_L                      0x18
+#define LPS22H_RPDS_H                      0x19
+
+
+// Status register (R)
+#define LPS22H_STATUS                      0x27
+#define LPS22H_STATUS_T_OR                             0x20
+#define LPS22H_STATUS_P_OR                             0x10
+#define LPS22H_STATUS_T_DA                             0x02
+#define LPS22H_STATUS_P_DA                             0x01
+
+// Pressure output value (R)
+#define LPS22H_PRESSURE_OUT_XL             0x28
+#define LPS22H_PRESSURE_OUT_L              0x29
+#define LPS22H_PRESSURE_OUT_H              0x2A
+
+// Temperature output value (R)
+#define LPS22H_TEMP_OUT_L                  0x2B
+#define LPS22H_TEMP_OUT_H                  0x2C
+
+// RESERVED - 2D-77
+
+#define LPS22H_I2C_ADDR              0x5D
+
+static uint8_t lps22h_chip_id = 0;
+
+// uncompensated pressure and temperature
+static int32_t lps22h_up = 0;
+static int32_t lps22h_ut = 0;
+
+// 3 bytes of pressure followed by two bytes of temperature
+#define LPS22H_DATA_FRAME_SIZE (LPS22H_TEMP_OUT_H - LPS22H_PRESSURE_OUT_XL + 1)
+
+static DMA_DATA_ZERO_INIT uint8_t sensor_data[LPS22H_DATA_FRAME_SIZE];
+
+static bool lps22hStartUT(baroDev_t *baro);
+static bool lps22hReadUT(baroDev_t *baro);
+static bool lps22hGetUT(baroDev_t *baro);
+static bool lps22hStartUP(baroDev_t *baro);
+static bool lps22hReadUP(baroDev_t *baro);
+static bool lps22hGetUP(baroDev_t *baro);
+
+STATIC_UNIT_TESTED void lps22hCalculate(int32_t *pressure, int32_t *temperature);
+
+static void lps22hBusInit(const extDevice_t *dev)
+{
+#ifdef USE_BARO_SPI_LPS22H
+    if (dev->bus->busType == BUS_TYPE_SPI) {
+        IOHi(dev->busType_u.spi.csnPin); // Disable
+        IOInit(dev->busType_u.spi.csnPin, OWNER_BARO_CS, 0);
+        IOConfigGPIO(dev->busType_u.spi.csnPin, IOCFG_OUT_PP);
+        spiSetClkDivisor(dev, spiCalculateDivider(LPS22H_MAX_SPI_CLK_HZ));
+    }
+#else
+    UNUSED(dev);
+#endif
+}
+
+static void lps22hBusDeinit(const extDevice_t *dev)
+{
+#ifdef USE_BARO_SPI_LPS22H
+    if (dev->bus->busType == BUS_TYPE_SPI) {
+        ioPreinitByIO(dev->busType_u.spi.csnPin, IOCFG_IPU, PREINIT_PIN_STATE_HIGH);
+    }
+#else
+    UNUSED(dev);
+#endif
+}
+
+bool lps22hDetect(baroDev_t *baro)
+{
+    delay(20);
+
+    extDevice_t *dev = &baro->dev;
+    bool defaultAddressApplied = false;
+
+    lps22hBusInit(dev);
+
+    if ((dev->bus->busType == BUS_TYPE_I2C) && (dev->busType_u.i2c.address == 0)) {
+        // Default address for LPS22H
+        dev->busType_u.i2c.address = LPS22H_I2C_ADDR;
+        defaultAddressApplied = true;
+    }
+
+    busReadRegisterBuffer(dev, LPS22H_WHO_AM_I, &lps22h_chip_id, 1);  /* read Chip Id */
+
+    if ((lps22h_chip_id != LPS22HB_CHIP_ID) && (lps22h_chip_id != LPS22HH_CHIP_ID)) {
+        lps22hBusDeinit(dev);
+        if (defaultAddressApplied) {
+            dev->busType_u.i2c.address = 0;
+        }
+        return false;
+    }
+
+    busDeviceRegister(dev);
+
+    // Reset the device
+    busWriteRegister(dev, LPS22H_CTRL_REG2, LPS22H_CTRL_REG2_SWRESET);
+    busWriteRegister(dev, LPS22H_CTRL_REG1, LPS22H_ENCODE_BITS(
+    LPS22H_CTRL_REG1_ODR_POWER_DOWN, LPS22H_CTRL_REG1_ODR_MASK, LPS22H_CTRL_REG1_ODR_SHIFT
+    ));
+
+    // these are dummy as temperature is measured as part of pressure
+    baro->combined_read = true;
+    baro->ut_delay = 0;
+    baro->start_ut = lps22hStartUT;
+    baro->get_ut = lps22hGetUT;
+    baro->read_ut = lps22hReadUT;
+    // only _up part is executed, and gets both temperature and pressure
+    baro->start_up = lps22hStartUP;
+    baro->get_up = lps22hGetUP;
+    baro->read_up = lps22hReadUP;
+    baro->up_delay = 10000; // 10ms
+    baro->calculate = lps22hCalculate;
+
+    return true;
+}
+
+static bool lps22hStartUT(baroDev_t *baro)
+{
+    UNUSED(baro);
+    // dummy
+
+    return true;
+}
+
+static bool lps22hReadUT(baroDev_t *baro)
+{
+    UNUSED(baro);
+    // dummy
+    return true;
+}
+
+static bool lps22hGetUT(baroDev_t *baro)
+{
+    UNUSED(baro);
+    // dummy
+    return true;
+}
+
+static bool lps22hStartUP(baroDev_t *baro)
+{
+    // start measurement
+    // Trigger a new conversion
+    return busWriteRegister(&baro->dev, LPS22H_CTRL_REG2, LPS22H_CTRL_REG2_ONE_SHOT|LPS22H_CTRL_REG2_IF_ADD_INC);
+}
+
+static bool lps22hReadUP(baroDev_t *baro)
+{
+    uint8_t status;
+    if (busBusy(&baro->dev, NULL)) {
+        return false;
+    }
+    busReadRegisterBuffer(&baro->dev, LPS22H_STATUS, &status, 1);
+    if (!(status & LPS22H_STATUS_P_DA)) {
+        return false; // Data not ready
+    }
+
+    // Read data from sensor
+    return busReadRegisterBufferStart(&baro->dev, LPS22H_PRESSURE_OUT_XL, sensor_data, LPS22H_DATA_FRAME_SIZE);
+}
+
+static bool lps22hGetUP(baroDev_t *baro)
+{
+    if (busBusy(&baro->dev, NULL)) {
+        return false;
+    }
+
+    lps22h_up = (int32_t)(sensor_data[0] | sensor_data[1] << 8 | sensor_data[2] << 16);
+    // Sign extend 24-bit to 32-bit
+    if (lps22h_up & 0x800000) {
+        lps22h_up |= 0xFF000000; // Extend sign bit
+    }
+    
+    lps22h_ut = (int32_t)(sensor_data[3] | sensor_data[4] << 8);
+    if (lps22h_ut & 0x8000) {
+        lps22h_ut |= 0xFFFF0000; // Sign extend 16-bit to 32-bit
+    }
+
+    return true;
+}
+
+// Returns temperature in DegC, resolution is 0.01 DegC. Output value of "5123" equals 51.23 DegC
+// t_fine carries fine temperature as global value
+static int32_t lps22hCompensateTemperature(int32_t adc_T)
+{
+    return adc_T;
+}
+
+// Returns pressure in Pa as unsigned 32 bit integer in Q24.8 format (24 integer bits and 8 fractional bits).
+// Output value of "24674867" represents 24674867/256 = 96386.2 Pa = 963.862 hPa
+static uint32_t lps22hCompensatePressure(int32_t adc_P)
+{
+    return (uint32_t)(adc_P * 100.0f / 16);
+}
+
+STATIC_UNIT_TESTED void lps22hCalculate(int32_t *pressure, int32_t *temperature)
+{
+    // calculate
+    int32_t t;
+    uint32_t p;
+    t = lps22hCompensateTemperature(lps22h_ut);
+    p = lps22hCompensatePressure(lps22h_up);
+
+    if (pressure)
+        *pressure = (int32_t)(p / 256);
+    if (temperature)
+        *temperature = t;
+}
+
+// Just for debug purpose, not used in production
+/*
+void lps22hDebug(baroDev_t *baro)
+{
+    uint8_t status;
+    uint8_t id;
+    uint8_t reg1, reg2;
+    int32_t pressure;
+    int32_t temperature;
+    uint8_t raw_data[LPS22H_DATA_FRAME_SIZE];
+
+    // Step 1: Read chip ID and configuration registers
+    cliPrintf("LPS22H Debug Start...\r\n");
+    
+    busReadRegisterBuffer(&baro->dev, LPS22H_WHO_AM_I, &id, 1);
+    busReadRegisterBuffer(&baro->dev, LPS22H_CTRL_REG1, &reg1, 1);
+    busReadRegisterBuffer(&baro->dev, LPS22H_CTRL_REG2, &reg2, 1);
+    
+    cliPrintf("Chip ID: 0x%02X (should be 0xB1)\r\n", id);
+    cliPrintf("CTRL_REG1: 0x%02X\r\n", reg1);
+    cliPrintf("CTRL_REG2: 0x%02X\r\n", reg2);
+    
+    // Step 2: Trigger measurement
+    cliPrintf("Triggering measurement...\r\n");
+    busWriteRegister(&baro->dev, LPS22H_CTRL_REG2, LPS22H_CTRL_REG2_ONE_SHOT);
+    
+    // Step 3: Wait for data ready
+    cliPrintf("Waiting for data ready...\r\n");
+    uint32_t startTime = millis();
+    bool dataReady = false;
+    
+    while ((millis() - startTime) < 100) { // Wait max 100ms
+        busReadRegisterBuffer(&baro->dev, LPS22H_STATUS, &status, 1);
+        cliPrintf("Status register: 0x%02X\r\n", status);
+        
+        if (status & LPS22H_STATUS_P_DA) {
+            dataReady = true;
+            cliPrintf("Data ready! Time taken: %dms\r\n", (int)(millis() - startTime));
+            break;
+        }
+        delay(5);
+    }
+    
+    if (!dataReady) {
+        cliPrintf("Timeout! Data not ready\r\n");
+        return;
+    }
+    
+    // Step 4: Read raw data
+    busReadRegisterBuffer(&baro->dev, LPS22H_PRESSURE_OUT_XL, raw_data, LPS22H_DATA_FRAME_SIZE);
+    cliPrintf("Raw data: [0x%02X,0x%02X,0x%02X,0x%02X,0x%02X]\r\n", 
+              raw_data[0], raw_data[1], raw_data[2], raw_data[3], raw_data[4]);
+    
+    // Step 5: Calculate 24-bit pressure and 16-bit temperature values
+    int32_t raw_pressure = (int32_t)(raw_data[0] | raw_data[1] << 8 | raw_data[2] << 16);
+    // Add sign extension
+    if (raw_pressure & 0x800000) {
+        raw_pressure |= 0xFF000000;
+    }
+    
+    int16_t raw_temp = (int16_t)(raw_data[3] | raw_data[4] << 8);
+    
+    cliPrintf("Parsed 24-bit pressure: %d (0x%08X)\r\n", raw_pressure, raw_pressure);
+    cliPrintf("Parsed 16-bit temperature: %d (0x%04X)\r\n", raw_temp, (uint16_t)raw_temp);
+    
+    // Step 6: Apply conversion formulas
+    // Fix all calculations to use double throughout
+    float current_p_hpa = (raw_pressure * 100.0) / (16.0 * 256.0);
+    float correct_p_hpa = (raw_pressure / 4096.0) * 100.0;
+    
+    int32_t current_p_pa = (int32_t)(current_p_hpa * 100.0);
+    int32_t correct_p_pa = (int32_t)(correct_p_hpa * 100.0);
+    
+    cliPrintf("Current formula pressure: %d Pa (%.2f hPa)\r\n", 
+              current_p_pa, (double)current_p_hpa);
+    cliPrintf("Correct formula pressure: %d Pa (%.2f hPa)\r\n", 
+              correct_p_pa, (double)correct_p_hpa);
+    
+    // Step 7: Calculate using driver functions
+    lps22h_up = raw_pressure;
+    lps22h_ut = raw_temp;
+    lps22hCalculate(&pressure, &temperature);
+    
+    float driver_p_hpa = pressure / 100.0;
+    float driver_t_c = temperature / 100.0;
+    
+    cliPrintf("Driver calculated pressure: %d Pa (%.2f hPa)\r\n", 
+              pressure, (double)driver_p_hpa);
+    cliPrintf("Driver calculated temperature: %.2f C\r\n", 
+              (double)driver_t_c);
+    
+    cliPrintf("LPS22H Debug End\r\n");
+}
+*/
+#endif
diff --git a/src/main/drivers/barometer/barometer_lps22h.h b/src/main/drivers/barometer/barometer_lps22h.h
new file mode 100644
index 0000000000..21b98319ba
--- /dev/null
+++ b/src/main/drivers/barometer/barometer_lps22h.h
@@ -0,0 +1,25 @@
+/*
+ * This file is part of Betaflight.
+ *
+ * Betaflight is free software. You can redistribute this software
+ * and/or modify this software under the terms of the GNU General
+ * Public License as published by the Free Software Foundation,
+ * either version 3 of the License, or (at your option) any later
+ * version.
+ *
+ * Betaflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+bool lps22hDetect(baroDev_t *baro);
+//void lps22hDebug(baroDev_t *baro);
diff --git a/src/main/sensors/barometer.c b/src/main/sensors/barometer.c
index ed73ba7278..c5bca24883 100644
--- a/src/main/sensors/barometer.c
+++ b/src/main/sensors/barometer.c
@@ -45,6 +45,7 @@
 #include "drivers/barometer/barometer_lps.h"
 #include "drivers/barometer/barometer_2smpb_02b.h"
 #include "drivers/barometer/barometer_lps22df.h"
+#include "drivers/barometer/barometer_lps22h.h"
 #include "drivers/bus.h"
 #include "drivers/bus_i2c_busdev.h"
 #include "drivers/bus_spi.h"
@@ -82,7 +83,8 @@ void pgResetFn_barometerConfig(barometerConfig_t *barometerConfig)
     defined(DEFAULT_BARO_BMP280) || defined(DEFAULT_BARO_SPI_MS5611) || defined(DEFAULT_BARO_MS5611) || \
     defined(DEFAULT_BARO_BMP085) || defined(DEFAULT_BARO_SPI_LPS) || defined(DEFAULT_BARO_SPI_QMP6988) || \
     defined(DEFAULT_BARO_QMP6988)) || defined(DEFAULT_BARO_DPS310) || defined(DEFAULT_BARO_SPI_DPS310) || \
-    defined(DEFAULT_BARO_LPS22DF) || defined(DEFAULT_BARO_SPI_LPS22DF)
+    defined(DEFAULT_BARO_LPS22DF) || defined(DEFAULT_BARO_SPI_LPS22DF) || \
+    defined(DEFAULT_BARO_LPS22H) || defined(DEFAULT_BARO_SPI_LPS22H) 
 
 #if defined(USE_BARO_DPS310) || defined(USE_BARO_SPI_DPS310)
 #if defined(USE_BARO_SPI_DPS310)
@@ -118,7 +120,6 @@ void pgResetFn_barometerConfig(barometerConfig_t *barometerConfig)
 #define DEFAULT_BARO_SPI_LPS
 #elif defined(DEFAULT_BARO_BMP085)
 #define DEFAULT_BARO_BMP085
-#endif
 #elif defined(USE_BARO_2SMBP_02B) || defined(USE_BARO_SPI_2SMBP_02B)
 #if defined(USE_BARO_SPI_2SMBP_02B)
 #define DEFAULT_BARO_SPI_2SMBP_02B
@@ -126,24 +127,31 @@ void pgResetFn_barometerConfig(barometerConfig_t *barometerConfig)
 #define DEFAULT_BARO_2SMBP_02B
 #endif
 #elif defined(USE_BARO_LPS22DF) || defined(USE_BARO_SPI_LPS22DF)
-#if defined(USE_BARO_LPS22DF)
+#if defined(USE_BARO_SPI_LPS22DF)
 #define DEFAULT_BARO_SPI_LPS22DF
 #else
 #define DEFAULT_BARO_LPS22DF
 #endif
+#elif defined(USE_BARO_LPS22H) || defined(USE_BARO_SPI_LPS22H)
+#if defined(USE_BARO_SPI_LPS22H)
+#define DEFAULT_BARO_SPI_LPS22H
+#else
+#define DEFAULT_BARO_LPS22H
+#endif
+#endif
 #endif
 
 #ifndef DEFAULT_BARO_I2C_ADDRESS
 #define DEFAULT_BARO_I2C_ADDRESS 0
 #endif
 
-#if defined(DEFAULT_BARO_SPI_BMP388) || defined(DEFAULT_BARO_SPI_BMP280) || defined(DEFAULT_BARO_SPI_MS5611) || defined(DEFAULT_BARO_SPI_QMP6988) || defined(DEFAULT_BARO_SPI_LPS) || defined(DEFAULT_BARO_SPI_DPS310) || defined(DEFAULT_BARO_SPI_2SMBP_02B)
+#if defined(DEFAULT_BARO_SPI_BMP388) || defined(DEFAULT_BARO_SPI_BMP280) || defined(DEFAULT_BARO_SPI_MS5611) || defined(DEFAULT_BARO_SPI_QMP6988) || defined(DEFAULT_BARO_SPI_LPS) || defined(DEFAULT_BARO_SPI_DPS310) || defined(DEFAULT_BARO_SPI_2SMBP_02B) || defined(DEFAULT_BARO_SPI_LPS22DF) || defined(DEFAULT_BARO_SPI_LPS22H)
     barometerConfig->baro_busType = BUS_TYPE_SPI;
     barometerConfig->baro_spi_device = SPI_DEV_TO_CFG(spiDeviceByInstance(BARO_SPI_INSTANCE));
     barometerConfig->baro_spi_csn = IO_TAG(BARO_CS_PIN);
     barometerConfig->baro_i2c_device = I2C_DEV_TO_CFG(I2CINVALID);
     barometerConfig->baro_i2c_address = 0;
-#elif defined(DEFAULT_BARO_MS5611) || defined(DEFAULT_BARO_BMP388) || defined(DEFAULT_BARO_BMP280) || defined(DEFAULT_BARO_BMP085) ||defined(DEFAULT_BARO_QMP6988) || defined(DEFAULT_BARO_DPS310) || defined(DEFAULT_BARO_2SMBP_02B) || defined(USE_BARO_LPS22DF)
+#elif defined(DEFAULT_BARO_MS5611) || defined(DEFAULT_BARO_BMP388) || defined(DEFAULT_BARO_BMP280) || defined(DEFAULT_BARO_BMP085) ||defined(DEFAULT_BARO_QMP6988) || defined(DEFAULT_BARO_DPS310) || defined(DEFAULT_BARO_2SMBP_02B) || defined(DEFAULT_BARO_LPS22DF) || defined(DEFAULT_BARO_LPS22H)
     // All I2C devices shares a default config with address = 0 (per device default)
     barometerConfig->baro_busType = BUS_TYPE_I2C;
     barometerConfig->baro_i2c_device = I2C_DEV_TO_CFG(BARO_I2C_INSTANCE);
@@ -193,7 +201,7 @@ static bool baroDetect(baroDev_t *baroDev, baroSensor_e baroHardwareToUse)
 
     baroSensor_e baroHardware = baroHardwareToUse;
 
-#if !defined(USE_BARO_BMP085) && !defined(USE_BARO_MS5611) && !defined(USE_BARO_SPI_MS5611) && !defined(USE_BARO_BMP388) && !defined(USE_BARO_BMP280) && !defined(USE_BARO_SPI_BMP280)&& !defined(USE_BARO_QMP6988) && !defined(USE_BARO_SPI_QMP6988) && !defined(USE_BARO_DPS310) && !defined(USE_BARO_SPI_DPS310) && !defined(DEFAULT_BARO_SPI_2SMBP_02B) && !defined(DEFAULT_BARO_2SMBP_02B) && !defined(USE_BARO_LPS22DF)
+#if !defined(USE_BARO_BMP085) && !defined(USE_BARO_MS5611) && !defined(USE_BARO_SPI_MS5611) && !defined(USE_BARO_BMP388) && !defined(USE_BARO_BMP280) && !defined(USE_BARO_SPI_BMP280)&& !defined(USE_BARO_QMP6988) && !defined(USE_BARO_SPI_QMP6988) && !defined(USE_BARO_DPS310) && !defined(USE_BARO_SPI_DPS310) && !defined(DEFAULT_BARO_SPI_2SMBP_02B) && !defined(DEFAULT_BARO_2SMBP_02B) && !defined(USE_BARO_LPS22DF) && !defined(USE_BARO_SPI_LPS22DF) && !defined(USE_BARO_LPS22H) && !defined(USE_BARO_SPI_LPS22H)
     UNUSED(dev);
 #endif
 
@@ -320,6 +328,15 @@ static bool baroDetect(baroDev_t *baroDev, baroSensor_e baroHardwareToUse)
 #endif
         FALLTHROUGH;
 
+    case BARO_LPS22H:
+#if defined(USE_BARO_LPS22H) || defined(USE_BARO_SPI_LPS22H)
+        if (lps22hDetect(baroDev)) {
+            baroHardware = BARO_LPS22H;
+            break;
+        }
+#endif
+        FALLTHROUGH;
+
     case BARO_VIRTUAL:
 #ifdef USE_VIRTUAL_BARO
         if (virtualBaroDetect(baroDev)) {
diff --git a/src/main/sensors/barometer.h b/src/main/sensors/barometer.h
index ca6dc2601d..b6456a225e 100644
--- a/src/main/sensors/barometer.h
+++ b/src/main/sensors/barometer.h
@@ -35,7 +35,8 @@ typedef enum {
     BARO_DPS310 = 8,
     BARO_2SMPB_02B = 9,
     BARO_LPS22DF = 10,
-    BARO_VIRTUAL = 11,
+    BARO_LPS22H = 11,
+    BARO_VIRTUAL = 12, 
 } baroSensor_e;
 
 typedef struct barometerConfig_s {
diff --git a/src/main/target/common_pre.h b/src/main/target/common_pre.h
index 626ddb4e02..bcea6d1949 100644
--- a/src/main/target/common_pre.h
+++ b/src/main/target/common_pre.h
@@ -96,6 +96,8 @@
 #define USE_BARO_SPI_2SMBP_02B
 #define USE_BARO_LPS22DF
 #define USE_BARO_SPI_LPS22DF
+#define USE_BARO_LPS22H
+#define USE_BARO_SPI_LPS22H
 #endif
 
 #if !defined(USE_GYRO) && !defined(USE_ACC)