Mirror/betaflight
1
0
Fork 0
mirror of https://github.com/betaflight/betaflight.git synced 2025-07-23 16:25:31 +03:00
Code Issues Wiki Activity

Improve ESC compatibility by enabling PWM output as soon as possible.

Browse source 
A user reported a problem where if the board was powered up before
connecting the main battery the ESCs would work, however when the board
and ESCs were powered at the same time the ESCs would not initialise
correctly.
This commit is contained in:
Dominic Clifton 2015-02-14 23:49:55 +00:00
parent d12d1952eb
commit 9a7de3cf3c
1 changed files with 36 additions and 36 deletions
Download patch file Download diff file Expand all files Collapse all files

72
src/main/main.c
View file

@ -178,6 +178,42 @@ void init(void)
timerInit(); // timer must be initialized before any channel is allocated timerInit(); // timer must be initialized before any channel is allocated
memset(&pwm_params, 0, sizeof(pwm_params));
// when using airplane/wing mixer, servo/motor outputs are remapped
if (masterConfig.mixerMode == MIXER_AIRPLANE || masterConfig.mixerMode == MIXER_FLYING_WING)
pwm_params.airplane = true;
else
pwm_params.airplane = false;
#if defined(USE_USART2) && defined(STM32F10X)
pwm_params.useUART2 = doesConfigurationUsePort(SERIAL_PORT_USART2);
#endif
pwm_params.useVbat = feature(FEATURE_VBAT);
pwm_params.useSoftSerial = feature(FEATURE_SOFTSERIAL);
pwm_params.useParallelPWM = feature(FEATURE_RX_PARALLEL_PWM);
pwm_params.useRSSIADC = feature(FEATURE_RSSI_ADC);
pwm_params.useCurrentMeterADC = feature(FEATURE_CURRENT_METER)
&& masterConfig.batteryConfig.currentMeterType == CURRENT_SENSOR_ADC;
pwm_params.useLEDStrip = feature(FEATURE_LED_STRIP);
pwm_params.usePPM = feature(FEATURE_RX_PPM);
pwm_params.useOneshot = feature(FEATURE_ONESHOT125);
pwm_params.useSerialRx = feature(FEATURE_RX_SERIAL);
pwm_params.useServos = isMixerUsingServos();
pwm_params.extraServos = currentProfile->gimbalConfig.gimbal_flags & GIMBAL_FORWARDAUX;
pwm_params.motorPwmRate = masterConfig.motor_pwm_rate;
pwm_params.servoPwmRate = masterConfig.servo_pwm_rate;
pwm_params.idlePulse = PULSE_1MS; // standard PWM for brushless ESC (default, overridden below)
if (feature(FEATURE_3D))
pwm_params.idlePulse = masterConfig.flight3DConfig.neutral3d;
if (pwm_params.motorPwmRate > 500)
pwm_params.idlePulse = 0; // brushed motors
pwm_params.servoCenterPulse = masterConfig.escAndServoConfig.servoCenterPulse;
pwmRxInit(masterConfig.inputFilteringMode);
pwmOutputConfiguration_t *pwmOutputConfiguration = pwmInit(&pwm_params);
mixerUsePWMOutputConfiguration(pwmOutputConfiguration);
#ifdef BEEPER #ifdef BEEPER
beeperConfig_t beeperConfig = { beeperConfig_t beeperConfig = {
.gpioPin = BEEP_PIN, .gpioPin = BEEP_PIN,
@ -289,42 +325,6 @@ void init(void)
serialInit(&masterConfig.serialConfig); serialInit(&masterConfig.serialConfig);
memset(&pwm_params, 0, sizeof(pwm_params));
// when using airplane/wing mixer, servo/motor outputs are remapped
if (masterConfig.mixerMode == MIXER_AIRPLANE || masterConfig.mixerMode == MIXER_FLYING_WING)
pwm_params.airplane = true;
else
pwm_params.airplane = false;
#if defined(USE_USART2) && defined(STM32F10X)
pwm_params.useUART2 = doesConfigurationUsePort(SERIAL_PORT_USART2);
#endif
pwm_params.useVbat = feature(FEATURE_VBAT);
pwm_params.useSoftSerial = feature(FEATURE_SOFTSERIAL);
pwm_params.useParallelPWM = feature(FEATURE_RX_PARALLEL_PWM);
pwm_params.useRSSIADC = feature(FEATURE_RSSI_ADC);
pwm_params.useCurrentMeterADC = feature(FEATURE_CURRENT_METER)
&& masterConfig.batteryConfig.currentMeterType == CURRENT_SENSOR_ADC;
pwm_params.useLEDStrip = feature(FEATURE_LED_STRIP);
pwm_params.usePPM = feature(FEATURE_RX_PPM);
pwm_params.useOneshot = feature(FEATURE_ONESHOT125);
pwm_params.useSerialRx = feature(FEATURE_RX_SERIAL);
pwm_params.useServos = isMixerUsingServos();
pwm_params.extraServos = currentProfile->gimbalConfig.gimbal_flags & GIMBAL_FORWARDAUX;
pwm_params.motorPwmRate = masterConfig.motor_pwm_rate;
pwm_params.servoPwmRate = masterConfig.servo_pwm_rate;
pwm_params.idlePulse = PULSE_1MS; // standard PWM for brushless ESC (default, overridden below)
if (feature(FEATURE_3D))
pwm_params.idlePulse = masterConfig.flight3DConfig.neutral3d;
if (pwm_params.motorPwmRate > 500)
pwm_params.idlePulse = 0; // brushed motors
pwm_params.servoCenterPulse = masterConfig.escAndServoConfig.servoCenterPulse;
pwmRxInit(masterConfig.inputFilteringMode);
pwmOutputConfiguration_t *pwmOutputConfiguration = pwmInit(&pwm_params);
mixerUsePWMOutputConfiguration(pwmOutputConfiguration);
failsafe = failsafeInit(&masterConfig.rxConfig); failsafe = failsafeInit(&masterConfig.rxConfig);
beepcodeInit(failsafe); beepcodeInit(failsafe);
rxInit(&masterConfig.rxConfig, failsafe); rxInit(&masterConfig.rxConfig, failsafe);