diff --git a/docs/Cli.md b/docs/Cli.md
index db3b10d061..e32ad74e8a 100644
--- a/docs/Cli.md
+++ b/docs/Cli.md
@@ -179,7 +179,7 @@ Click on a variable to jump to the relevant documentation page.
 | [`vbat_scale`](Battery.md)                    | Result is Vbatt in 0.1V steps. 3.3V = ADC Vref, 4095 = 12bit adc, 110 = 11:1 voltage divider (10k:1k) x 10 for 0.1V. Adjust this slightly if reported pack voltage is different from multimeter reading. You can get current voltage by typing "status" in cli.                                                                                                                                                                                                                                                          | 0      | 255    | 110              | Master       | UINT8    |
 | [`vbat_max_cell_voltage`](Battery.md)         | Maximum voltage per cell, used for auto-detecting battery voltage in 0.01V units, default is 430 (4.3V)                                                                                                                                                                                                                                                                                                                                                                                                                    | 100     | 500     | 430               | Master       | UINT16    |
 | [`vbat_min_cell_voltage`](Battery.md)         | Minimum voltage per cell, this triggers battery-critical alarms, in 0.01V units, default is 330 (3.3V)                                                                                                                                                                                                                                                                                                                                                                                                                     | 100     | 500     | 33               | Master       | UINT16    |
-| [`vbat_warning_cell_voltage`](Battery.md)     | Warning voltage per cell, this triggers battery-warning alarms, in 0.01V units, default is 350 (3.5V)                                                                                                                                                                                                                                                                                                                                                                                                                      | 100     | 500     | 35               | Master       | UINT16    |
+| [`vbat_warning_cell_voltage`](Battery.md)     | Warning voltage per cell, this triggers battery-warning alarms, in 0.01V units, default is 350 (3.5V)                                                                                                                                                                                                                                                                                                                                                                                                                      | 100     | 500     | 350               | Master       | UINT16    |
 | [`vbat_hysteresis`](Battery.md)               | Sets the hysteresis value for low-battery alarms, in 0.01V units, default is 1 (0.01V)                                                                                                                                                                                                                                                                                                                                                                                                                                     | 10     | 250    | 1                | Master       | UINT8    |
 | [`current_meter_scale`](Battery.md)           | This sets the output voltage to current scaling for the current sensor in 0.1 mV/A steps. 400 is 40mV/A such as the ACS756 sensor outputs. 183 is the setting for the uberdistro with a 0.25mOhm shunt.                                                                                                                                                                                                                                                                                                                  | -10000 | 10000  | 400              | Master       | INT16    |
 | [`current_meter_offset`](Battery.md)          | This sets the output offset voltage of the current sensor in millivolts.                                                                                                                                                                                                                                                                                                                                                                                                                                                 | 0      | 3300   | 0                | Master       | UINT16   |