Mirror/betaflight
1
0
Fork 0
mirror of https://github.com/betaflight/betaflight.git synced 2025-07-13 19:40:31 +03:00
Code Issues Wiki Activity

synced with mwc 2.1. it's suprising how many "new" things in 2.1 didn't actually matter on a real platform.

Browse source 
removed camtrig stuff since it wasnt possible. somewhat replaced with aux forwarding (see below)
2.1 buzzer code changed, untested.
removed flying wing mixer. nobody used that. 
added alt_hold_throttle_neutral, nav_slew_rate and looptime configuration to cli. default looptime set to 3000. changed default gyro_cmpf to 400 to sync with 2.1.
increased bmp085 oversampling
added gimbal_flags (bit 4 set) flag which, in PPM mode, forwards AUX1..4 to the lower 4 PWM outputs instead of using them as motors. set gimbal_flags=8 to test it out. output is fixed to 50Hz.
merged 2.1 gps changes (not many)
casting in gyro smoothing (nobody uses that anyway)
calibrate accel in gimbal mode, set smallangle in gyro-only mode
vtail4 mixer fix
flight tested on quadx w/ppm.


git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@182 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
This commit is contained in:
timecop 2012-07-20 14:53:15 +00:00
parent e70d7b5d16
commit c98113b82c
19 changed files with 5363 additions and 5696 deletions
Download patch file Download diff file Expand all files Collapse all files

7
src/cli.c
View file

@ -36,7 +36,7 @@ const char *mixerNames[] = {
// sync this with AvailableFeatures enum from board.h
const char *featureNames[] = {
"PPM", "VBAT", "INFLIGHT_ACC_CAL", "SPEKTRUM", "MOTOR_STOP",
"SERVO_TILT", "CAMTRIG", "GYRO_SMOOTHING", "LED_RING", "GPS",
"SERVO_TILT", "GYRO_SMOOTHING", "LED_RING", "GPS",
"FAILSAFE", "SONAR", "TELEMETRY",
NULL
};
@ -91,6 +91,7 @@ typedef struct {
const clivalue_t valueTable[] = {
{ "deadband", VAR_UINT8, &cfg.deadband, 0, 32 },
{ "yawdeadband", VAR_UINT8, &cfg.yawdeadband, 0, 100 },
{ "alt_hold_throttle_neutral", VAR_UINT8, &cfg.alt_hold_throttle_neutral, 1, 250 },
{ "midrc", VAR_UINT16, &cfg.midrc, 1200, 1700 },
{ "minthrottle", VAR_UINT16, &cfg.minthrottle, 0, 2000 },
{ "maxthrottle", VAR_UINT16, &cfg.maxthrottle, 0, 2000 },
@ -110,8 +111,6 @@ const clivalue_t valueTable[] = {
{ "vbatmaxcellvoltage", VAR_UINT8, &cfg.vbatmaxcellvoltage, 10, 50 },
{ "vbatmincellvoltage", VAR_UINT8, &cfg.vbatmincellvoltage, 10, 50 },
{ "yaw_direction", VAR_INT8, &cfg.yaw_direction, -1, 1 },
{ "wing_left_mid", VAR_UINT16, &cfg.wing_left_mid, 0, 2000 },
{ "wing_right_mid", VAR_UINT16, &cfg.wing_right_mid, 0, 2000 },
{ "tri_yaw_middle", VAR_UINT16, &cfg.tri_yaw_middle, 0, 2000 },
{ "tri_yaw_min", VAR_UINT16, &cfg.tri_yaw_min, 0, 2000 },
{ "tri_yaw_max", VAR_UINT16, &cfg.tri_yaw_max, 0, 2000 },
@ -142,6 +141,8 @@ const clivalue_t valueTable[] = {
{ "nav_controls_heading", VAR_UINT8, &cfg.nav_controls_heading, 0, 1 },
{ "nav_speed_min", VAR_UINT16, &cfg.nav_speed_min, 10, 2000 },
{ "nav_speed_max", VAR_UINT16, &cfg.nav_speed_max, 10, 2000 },
{ "nav_slew_rate", VAR_UINT8, &cfg.nav_slew_rate, 0, 100 },
{ "looptime", VAR_UINT16, &cfg.looptime, 1500, 9000 },
{ "p_pitch", VAR_UINT8, &cfg.P8[PITCH], 0, 200 },
{ "i_pitch", VAR_UINT8, &cfg.I8[PITCH], 0, 200 },
{ "d_pitch", VAR_UINT8, &cfg.D8[PITCH], 0, 200 },