mirror of
https://github.com/betaflight/betaflight.git
synced 2025-07-19 14:25:20 +03:00
Simplify cli names // flash space savings
This commit is contained in:
borisbstyle
parent
cf04294f70
commit
d1944b532c
1 changed files with 40 additions and 40 deletions
|
|
@ -499,14 +499,14 @@ const clivalue_t valueTable[] = {
|
|||
{ "max_check", VAR_UINT16 | MASTER_VALUE, &rxConfig()->maxcheck, .config.minmax = { PWM_RANGE_ZERO, PWM_RANGE_MAX } },
|
||||
{ "rssi_channel", VAR_INT8 | MASTER_VALUE, &rxConfig()->rssi_channel, .config.minmax = { 0, MAX_SUPPORTED_RC_CHANNEL_COUNT } },
|
||||
{ "rssi_scale", VAR_UINT8 | MASTER_VALUE, &rxConfig()->rssi_scale, .config.minmax = { RSSI_SCALE_MIN, RSSI_SCALE_MAX } },
|
||||
{ "rc_interpolation", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &rxConfig()->rcInterpolation, .config.lookup = { TABLE_RC_INTERPOLATION } },
|
||||
{ "rc_interpolation_channels", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &rxConfig()->rcInterpolationChannels, .config.lookup = { TABLE_RC_INTERPOLATION_CHANNELS } },
|
||||
{ "rc_interpolation_interval", VAR_UINT8 | MASTER_VALUE, &rxConfig()->rcInterpolationInterval, .config.minmax = { 1, 50 } },
|
||||
{ "rc_interp", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &rxConfig()->rcInterpolation, .config.lookup = { TABLE_RC_INTERPOLATION } },
|
||||
{ "rc_interp_ch", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &rxConfig()->rcInterpolationChannels, .config.lookup = { TABLE_RC_INTERPOLATION_CHANNELS } },
|
||||
{ "rc_interp_int", VAR_UINT8 | MASTER_VALUE, &rxConfig()->rcInterpolationInterval, .config.minmax = { 1, 50 } },
|
||||
{ "rssi_ppm_invert", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, &rxConfig()->rssi_ppm_invert, .config.lookup = { TABLE_OFF_ON } },
|
||||
#if defined(USE_PWM)
|
||||
{ "input_filtering_mode", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, &pwmConfig()->inputFilteringMode, .config.lookup = { TABLE_OFF_ON } },
|
||||
#endif
|
||||
{ "roll_yaw_cam_mix_degrees", VAR_UINT8 | MASTER_VALUE, &rxConfig()->fpvCamAngleDegrees, .config.minmax = { 0, 50 } },
|
||||
{ "fpv_mix_degrees", VAR_UINT8 | MASTER_VALUE, &rxConfig()->fpvCamAngleDegrees, .config.minmax = { 0, 50 } },
|
||||
{ "max_aux_channels", VAR_UINT8 | MASTER_VALUE, &rxConfig()->max_aux_channel, .config.minmax = { 0, 13 } },
|
||||
{ "debug_mode", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &masterConfig.debug_mode, .config.lookup = { TABLE_DEBUG } },
|
||||
|
||||
|
|
@ -570,41 +570,41 @@ const clivalue_t valueTable[] = {
|
|||
|
||||
#ifdef SPEKTRUM_BIND
|
||||
{ "spektrum_sat_bind", VAR_UINT8 | MASTER_VALUE, &rxConfig()->spektrum_sat_bind, .config.minmax = { SPEKTRUM_SAT_BIND_DISABLED, SPEKTRUM_SAT_BIND_MAX} },
|
||||
{ "spektrum_sat_bind_autoreset",VAR_UINT8 | MASTER_VALUE, &rxConfig()->spektrum_sat_bind_autoreset, .config.minmax = { 0, 1} },
|
||||
{ "spektrum_sat_bind_autorst", VAR_UINT8 | MASTER_VALUE, &rxConfig()->spektrum_sat_bind_autoreset, .config.minmax = { 0, 1} },
|
||||
#endif
|
||||
|
||||
#ifdef TELEMETRY
|
||||
{ "telemetry_switch", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &telemetryConfig()->telemetry_switch, .config.lookup = { TABLE_OFF_ON } },
|
||||
{ "telemetry_inversion", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &telemetryConfig()->telemetry_inversion, .config.lookup = { TABLE_OFF_ON } },
|
||||
{ "tlm_switch", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &telemetryConfig()->telemetry_switch, .config.lookup = { TABLE_OFF_ON } },
|
||||
{ "tlm_inversion", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &telemetryConfig()->telemetry_inversion, .config.lookup = { TABLE_OFF_ON } },
|
||||
{ "sport_halfduplex", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &telemetryConfig()->sportHalfDuplex, .config.lookup = { TABLE_OFF_ON } },
|
||||
{ "frsky_default_lattitude", VAR_FLOAT | MASTER_VALUE, &telemetryConfig()->gpsNoFixLatitude, .config.minmax = { -90.0, 90.0 } },
|
||||
{ "frsky_default_longitude", VAR_FLOAT | MASTER_VALUE, &telemetryConfig()->gpsNoFixLongitude, .config.minmax = { -180.0, 180.0 } },
|
||||
{ "frsky_coordinates_format", VAR_UINT8 | MASTER_VALUE, &telemetryConfig()->frsky_coordinate_format, .config.minmax = { 0, FRSKY_FORMAT_NMEA } },
|
||||
{ "frsky_default_lat", VAR_FLOAT | MASTER_VALUE, &telemetryConfig()->gpsNoFixLatitude, .config.minmax = { -90.0, 90.0 } },
|
||||
{ "frsky_default_long", VAR_FLOAT | MASTER_VALUE, &telemetryConfig()->gpsNoFixLongitude, .config.minmax = { -180.0, 180.0 } },
|
||||
{ "frsky_gps_format", VAR_UINT8 | MASTER_VALUE, &telemetryConfig()->frsky_coordinate_format, .config.minmax = { 0, FRSKY_FORMAT_NMEA } },
|
||||
{ "frsky_unit", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &telemetryConfig()->frsky_unit, .config.lookup = { TABLE_UNIT } },
|
||||
{ "frsky_vfas_precision", VAR_UINT8 | MASTER_VALUE, &telemetryConfig()->frsky_vfas_precision, .config.minmax = { FRSKY_VFAS_PRECISION_LOW, FRSKY_VFAS_PRECISION_HIGH } },
|
||||
{ "frsky_vfas_cell_voltage", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &telemetryConfig()->frsky_vfas_cell_voltage, .config.lookup = { TABLE_OFF_ON } },
|
||||
{ "hott_alarm_sound_interval", VAR_UINT8 | MASTER_VALUE, &telemetryConfig()->hottAlarmSoundInterval, .config.minmax = { 0, 120 } },
|
||||
{ "pid_values_as_telemetry", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &telemetryConfig()->pidValuesAsTelemetry, .config.lookup = {TABLE_OFF_ON } },
|
||||
{ "hott_alarm_sound_int", VAR_UINT8 | MASTER_VALUE, &telemetryConfig()->hottAlarmSoundInterval, .config.minmax = { 0, 120 } },
|
||||
{ "pid_in_telemetry", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &telemetryConfig()->pidValuesAsTelemetry, .config.lookup = {TABLE_OFF_ON } },
|
||||
#if defined(TELEMETRY_IBUS)
|
||||
{ "ibus_report_cell_voltage", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &ibusTelemetryConfig()->report_cell_voltage, .config.lookup = { TABLE_OFF_ON } },
|
||||
#endif
|
||||
#endif
|
||||
|
||||
{ "battery_capacity", VAR_UINT16 | MASTER_VALUE, &batteryConfig()->batteryCapacity, .config.minmax = { 0, 20000 } },
|
||||
{ "vbat_capacity", VAR_UINT16 | MASTER_VALUE, &batteryConfig()->batteryCapacity, .config.minmax = { 0, 20000 } },
|
||||
{ "vbat_scale", VAR_UINT8 | MASTER_VALUE, &batteryConfig()->vbatscale, .config.minmax = { VBAT_SCALE_MIN, VBAT_SCALE_MAX } },
|
||||
{ "vbat_max_cell_voltage", VAR_UINT8 | MASTER_VALUE, &batteryConfig()->vbatmaxcellvoltage, .config.minmax = { 10, 50 } },
|
||||
{ "vbat_min_cell_voltage", VAR_UINT8 | MASTER_VALUE, &batteryConfig()->vbatmincellvoltage, .config.minmax = { 10, 50 } },
|
||||
{ "vbat_warning_cell_voltage", VAR_UINT8 | MASTER_VALUE, &batteryConfig()->vbatwarningcellvoltage, .config.minmax = { 10, 50 } },
|
||||
{ "vbat_hysteresis", VAR_UINT8 | MASTER_VALUE, &batteryConfig()->vbathysteresis, .config.minmax = { 0, 250 } },
|
||||
{ "current_meter_scale", VAR_INT16 | MASTER_VALUE, &batteryConfig()->currentMeterScale, .config.minmax = { -16000, 16000 } },
|
||||
{ "current_meter_offset", VAR_INT16 | MASTER_VALUE, &batteryConfig()->currentMeterOffset, .config.minmax = { -16000, 16000 } },
|
||||
{ "multiwii_current_meter_output", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &batteryConfig()->multiwiiCurrentMeterOutput, .config.lookup = { TABLE_OFF_ON } },
|
||||
{ "current_scale", VAR_INT16 | MASTER_VALUE, &batteryConfig()->currentMeterScale, .config.minmax = { -16000, 16000 } },
|
||||
{ "current_offset", VAR_INT16 | MASTER_VALUE, &batteryConfig()->currentMeterOffset, .config.minmax = { -16000, 16000 } },
|
||||
{ "mwii_current_output", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &batteryConfig()->multiwiiCurrentMeterOutput, .config.lookup = { TABLE_OFF_ON } },
|
||||
{ "current_meter_type", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &batteryConfig()->currentMeterType, .config.lookup = { TABLE_CURRENT_SENSOR } },
|
||||
{ "battery_meter_type", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &batteryConfig()->batteryMeterType, .config.lookup = { TABLE_BATTERY_SENSOR } },
|
||||
{ "battery_notpresent_level", VAR_UINT8 | MASTER_VALUE, &batteryConfig()->batterynotpresentlevel, .config.minmax = { 0, 200 } },
|
||||
{ "no_vbat_level", VAR_UINT8 | MASTER_VALUE, &batteryConfig()->batterynotpresentlevel, .config.minmax = { 0, 200 } },
|
||||
{ "use_vbat_alerts", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &batteryConfig()->useVBatAlerts, .config.lookup = { TABLE_OFF_ON } },
|
||||
{ "use_consumption_alerts", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &batteryConfig()->useConsumptionAlerts, .config.lookup = { TABLE_OFF_ON } },
|
||||
{ "consumption_warning_percentage", VAR_UINT8 | MASTER_VALUE, &batteryConfig()->consumptionWarningPercentage, .config.minmax = { 0, 100 } },
|
||||
{ "vbat_usage_alerts", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &batteryConfig()->useConsumptionAlerts, .config.lookup = { TABLE_OFF_ON } },
|
||||
{ "vbat_usage_percent", VAR_UINT8 | MASTER_VALUE, &batteryConfig()->consumptionWarningPercentage, .config.minmax = { 0, 100 } },
|
||||
{ "align_gyro", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &gyroConfig()->gyro_align, .config.lookup = { TABLE_ALIGNMENT } },
|
||||
{ "align_acc", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &accelerometerConfig()->acc_align, .config.lookup = { TABLE_ALIGNMENT } },
|
||||
{ "align_mag", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &compassConfig()->mag_align, .config.lookup = { TABLE_ALIGNMENT } },
|
||||
|
|
@ -622,10 +622,10 @@ const clivalue_t valueTable[] = {
|
|||
{ "gyro_lowpass_type", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &gyroConfig()->gyro_soft_lpf_type, .config.lookup = { TABLE_LOWPASS_TYPE } },
|
||||
{ "gyro_lowpass", VAR_UINT8 | MASTER_VALUE, &gyroConfig()->gyro_soft_lpf_hz, .config.minmax = { 0, 255 } },
|
||||
{ "gyro_notch1_hz", VAR_UINT16 | MASTER_VALUE, &gyroConfig()->gyro_soft_notch_hz_1, .config.minmax = { 0, 16000 } },
|
||||
{ "gyro_notch1_cutoff", VAR_UINT16 | MASTER_VALUE, &gyroConfig()->gyro_soft_notch_cutoff_1, .config.minmax = { 1, 16000 } },
|
||||
{ "gyro_notch1_cut", VAR_UINT16 | MASTER_VALUE, &gyroConfig()->gyro_soft_notch_cutoff_1, .config.minmax = { 1, 16000 } },
|
||||
{ "gyro_notch2_hz", VAR_UINT16 | MASTER_VALUE, &gyroConfig()->gyro_soft_notch_hz_2, .config.minmax = { 0, 16000 } },
|
||||
{ "gyro_notch2_cutoff", VAR_UINT16 | MASTER_VALUE, &gyroConfig()->gyro_soft_notch_cutoff_2, .config.minmax = { 1, 16000 } },
|
||||
{ "moron_threshold", VAR_UINT8 | MASTER_VALUE, &gyroConfig()->gyroMovementCalibrationThreshold, .config.minmax = { 0, 128 } },
|
||||
{ "gyro_notch2_cut", VAR_UINT16 | MASTER_VALUE, &gyroConfig()->gyro_soft_notch_cutoff_2, .config.minmax = { 1, 16000 } },
|
||||
{ "moron_threshold", VAR_UINT8 | MASTER_VALUE, &gyroConfig()->gyroMovementCalibrationThreshold, .config.minmax = { 0, 200 } },
|
||||
{ "imu_dcm_kp", VAR_UINT16 | MASTER_VALUE, &imuConfig()->dcm_kp, .config.minmax = { 0, 32000 } },
|
||||
{ "imu_dcm_ki", VAR_UINT16 | MASTER_VALUE, &imuConfig()->dcm_ki, .config.minmax = { 0, 32000 } },
|
||||
|
||||
|
|
@ -634,8 +634,8 @@ const clivalue_t valueTable[] = {
|
|||
{ "deadband", VAR_UINT8 | MASTER_VALUE, &rcControlsConfig()->deadband, .config.minmax = { 0, 32 } },
|
||||
{ "yaw_deadband", VAR_UINT8 | MASTER_VALUE, &rcControlsConfig()->yaw_deadband, .config.minmax = { 0, 100 } },
|
||||
|
||||
{ "throttle_correction_value", VAR_UINT8 | MASTER_VALUE, &throttleCorrectionConfig()->throttle_correction_value, .config.minmax = { 0, 150 } },
|
||||
{ "throttle_correction_angle", VAR_UINT16 | MASTER_VALUE, &throttleCorrectionConfig()->throttle_correction_angle, .config.minmax = { 1, 900 } },
|
||||
{ "throttle_correct_value", VAR_UINT8 | MASTER_VALUE, &throttleCorrectionConfig()->throttle_correction_value, .config.minmax = { 0, 150 } },
|
||||
{ "throttle_correct_angle", VAR_UINT16 | MASTER_VALUE, &throttleCorrectionConfig()->throttle_correction_angle, .config.minmax = { 1, 900 } },
|
||||
|
||||
{ "yaw_control_direction", VAR_INT8 | MASTER_VALUE, &rcControlsConfig()->yaw_control_direction, .config.minmax = { -1, 1 } },
|
||||
|
||||
|
|
@ -645,8 +645,8 @@ const clivalue_t valueTable[] = {
|
|||
#ifdef USE_SERVOS
|
||||
{ "servo_center_pulse", VAR_UINT16 | MASTER_VALUE, &servoConfig()->servoCenterPulse, .config.minmax = { PWM_RANGE_ZERO, PWM_RANGE_MAX } },
|
||||
{ "tri_unarmed_servo", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, &servoMixerConfig()->tri_unarmed_servo, .config.lookup = { TABLE_OFF_ON } },
|
||||
{ "servo_lowpass_freq", VAR_UINT16 | MASTER_VALUE, &servoMixerConfig()->servo_lowpass_freq, .config.minmax = { 10, 400} },
|
||||
{ "servo_lowpass_enable", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, &servoMixerConfig()->servo_lowpass_enable, .config.lookup = { TABLE_OFF_ON } },
|
||||
{ "servo_lowpass_hz", VAR_UINT16 | MASTER_VALUE, &servoMixerConfig()->servo_lowpass_freq, .config.minmax = { 10, 400} },
|
||||
{ "servo_lowpass", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, &servoMixerConfig()->servo_lowpass_enable, .config.lookup = { TABLE_OFF_ON } },
|
||||
{ "servo_pwm_rate", VAR_UINT16 | MASTER_VALUE, &servoConfig()->servoPwmRate, .config.minmax = { 50, 498 } },
|
||||
{ "gimbal_mode", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &gimbalConfig()->mode, .config.lookup = { TABLE_GIMBAL_MODE } },
|
||||
#endif
|
||||
|
|
@ -662,7 +662,7 @@ const clivalue_t valueTable[] = {
|
|||
{ "yaw_srate", VAR_UINT8 | PROFILE_RATE_VALUE, &masterConfig.profile[0].controlRateProfile[0].rates[FD_YAW], .config.minmax = { 0, CONTROL_RATE_CONFIG_YAW_RATE_MAX } },
|
||||
{ "tpa_rate", VAR_UINT8 | PROFILE_RATE_VALUE, &masterConfig.profile[0].controlRateProfile[0].dynThrPID, .config.minmax = { 0, CONTROL_RATE_CONFIG_TPA_MAX} },
|
||||
{ "tpa_breakpoint", VAR_UINT16 | PROFILE_RATE_VALUE, &masterConfig.profile[0].controlRateProfile[0].tpa_breakpoint, .config.minmax = { PWM_RANGE_MIN, PWM_RANGE_MAX} },
|
||||
{ "airmode_activate_throttle", VAR_UINT16 | MASTER_VALUE, &rxConfig()->airModeActivateThreshold, .config.minmax = {1000, 2000 } },
|
||||
{ "airmode_start_throttle", VAR_UINT16 | MASTER_VALUE, &rxConfig()->airModeActivateThreshold, .config.minmax = {1000, 2000 } },
|
||||
|
||||
{ "failsafe_delay", VAR_UINT8 | MASTER_VALUE, &failsafeConfig()->failsafe_delay, .config.minmax = { 0, 200 } },
|
||||
{ "failsafe_off_delay", VAR_UINT8 | MASTER_VALUE, &failsafeConfig()->failsafe_off_delay, .config.minmax = { 0, 200 } },
|
||||
|
|
@ -694,17 +694,17 @@ const clivalue_t valueTable[] = {
|
|||
{ "mag_hardware", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, &compassConfig()->mag_hardware, .config.lookup = { TABLE_MAG_HARDWARE } },
|
||||
{ "mag_declination", VAR_INT16 | MASTER_VALUE, &compassConfig()->mag_declination, .config.minmax = { -18000, 18000 } },
|
||||
#endif
|
||||
{ "dterm_lowpass_type", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, &masterConfig.profile[0].pidProfile.dterm_filter_type, .config.lookup = { TABLE_LOWPASS_TYPE } },
|
||||
{ "dterm_lowpass", VAR_INT16 | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.dterm_lpf_hz, .config.minmax = {0, 16000 } },
|
||||
{ "dterm_notch_hz", VAR_UINT16 | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.dterm_notch_hz, .config.minmax = { 0, 16000 } },
|
||||
{ "dterm_notch_cutoff", VAR_UINT16 | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.dterm_notch_cutoff, .config.minmax = { 1, 16000 } },
|
||||
{ "vbat_pid_compensation", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, &masterConfig.profile[0].pidProfile.vbatPidCompensation, .config.lookup = { TABLE_OFF_ON } },
|
||||
{ "d_lowpass_type", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, &masterConfig.profile[0].pidProfile.dterm_filter_type, .config.lookup = { TABLE_LOWPASS_TYPE } },
|
||||
{ "d_lowpass", VAR_INT16 | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.dterm_lpf_hz, .config.minmax = {0, 16000 } },
|
||||
{ "d_notch_hz", VAR_UINT16 | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.dterm_notch_hz, .config.minmax = { 0, 16000 } },
|
||||
{ "d_notch_cutoff", VAR_UINT16 | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.dterm_notch_cutoff, .config.minmax = { 1, 16000 } },
|
||||
{ "vbat_pid_gain", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, &masterConfig.profile[0].pidProfile.vbatPidCompensation, .config.lookup = { TABLE_OFF_ON } },
|
||||
{ "pid_at_min_throttle", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, &masterConfig.profile[0].pidProfile.pidAtMinThrottle, .config.lookup = { TABLE_OFF_ON } },
|
||||
{ "anti_gravity_threshold", VAR_UINT16 | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.itermThrottleThreshold, .config.minmax = {20, 1000 } },
|
||||
{ "anti_gravity_thresh", VAR_UINT16 | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.itermThrottleThreshold, .config.minmax = {20, 1000 } },
|
||||
{ "anti_gravity_gain", VAR_FLOAT | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.itermAcceleratorGain, .config.minmax = {1, 30 } },
|
||||
{ "anti_gravity_rate_max", VAR_UINT16 | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.itermAcceleratorRateLimit, .config.minmax = {0, 2000 } },
|
||||
{ "setpoint_relax_ratio", VAR_UINT8 | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.setpointRelaxRatio, .config.minmax = {0, 100 } },
|
||||
{ "dterm_setpoint_weight", VAR_UINT8 | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.dtermSetpointWeight, .config.minmax = {0, 255 } },
|
||||
{ "d_setpoint_weight", VAR_UINT8 | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.dtermSetpointWeight, .config.minmax = {0, 255 } },
|
||||
{ "yaw_accel_limit", VAR_FLOAT | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.yawRateAccelLimit, .config.minmax = {0.1f, 50.0f } },
|
||||
{ "accel_limit", VAR_FLOAT | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.rateAccelLimit, .config.minmax = {0.1f, 50.0f } },
|
||||
|
||||
|
|
@ -734,8 +734,8 @@ const clivalue_t valueTable[] = {
|
|||
{ "i_vel", VAR_UINT8 | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.I8[PIDVEL], .config.minmax = { 0, 200 } },
|
||||
{ "d_vel", VAR_UINT8 | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.D8[PIDVEL], .config.minmax = { 0, 200 } },
|
||||
|
||||
{ "level_stick_sensitivity", VAR_UINT8 | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.levelSensitivity, .config.minmax = { 10, 200 } },
|
||||
{ "level_angle_limit", VAR_UINT8 | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.levelAngleLimit, .config.minmax = { 10, 120 } },
|
||||
{ "level_sensitivity", VAR_UINT8 | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.levelSensitivity, .config.minmax = { 10, 200 } },
|
||||
{ "level_limit", VAR_UINT8 | PROFILE_VALUE, &masterConfig.profile[0].pidProfile.levelAngleLimit, .config.minmax = { 10, 120 } },
|
||||
|
||||
#ifdef BLACKBOX
|
||||
{ "blackbox_rate_num", VAR_UINT8 | MASTER_VALUE, &blackboxConfig()->rate_num, .config.minmax = { 1, 32 } },
|
||||
|
|
@ -774,16 +774,16 @@ const clivalue_t valueTable[] = {
|
|||
{ "osd_time_alarm", VAR_UINT16 | MASTER_VALUE, &osdProfile()->time_alarm, .config.minmax = { 0, 60 } },
|
||||
{ "osd_alt_alarm", VAR_UINT16 | MASTER_VALUE, &osdProfile()->alt_alarm, .config.minmax = { 0, 10000 } },
|
||||
|
||||
{ "osd_main_voltage_pos", VAR_UINT16 | MASTER_VALUE, &osdProfile()->item_pos[OSD_MAIN_BATT_VOLTAGE], .config.minmax = { 0, OSD_POS_MAX } },
|
||||
{ "osd_vbat_pos", VAR_UINT16 | MASTER_VALUE, &osdProfile()->item_pos[OSD_MAIN_BATT_VOLTAGE], .config.minmax = { 0, OSD_POS_MAX } },
|
||||
{ "osd_rssi_pos", VAR_UINT16 | MASTER_VALUE, &osdProfile()->item_pos[OSD_RSSI_VALUE], .config.minmax = { 0, OSD_POS_MAX } },
|
||||
{ "osd_flytimer_pos", VAR_UINT16 | MASTER_VALUE, &osdProfile()->item_pos[OSD_FLYTIME], .config.minmax = { 0, OSD_POS_MAX } },
|
||||
{ "osd_ontime_pos", VAR_UINT16 | MASTER_VALUE, &osdProfile()->item_pos[OSD_ONTIME], .config.minmax = { 0, OSD_POS_MAX } },
|
||||
{ "osd_ontimer_pos", VAR_UINT16 | MASTER_VALUE, &osdProfile()->item_pos[OSD_ONTIME], .config.minmax = { 0, OSD_POS_MAX } },
|
||||
{ "osd_flymode_pos", VAR_UINT16 | MASTER_VALUE, &osdProfile()->item_pos[OSD_FLYMODE], .config.minmax = { 0, OSD_POS_MAX } },
|
||||
{ "osd_throttle_pos", VAR_UINT16 | MASTER_VALUE, &osdProfile()->item_pos[OSD_THROTTLE_POS], .config.minmax = { 0, OSD_POS_MAX } },
|
||||
{ "osd_vtx_channel_pos", VAR_UINT16 | MASTER_VALUE, &osdProfile()->item_pos[OSD_VTX_CHANNEL], .config.minmax = { 0, OSD_POS_MAX } },
|
||||
{ "osd_crosshairs", VAR_UINT16 | MASTER_VALUE, &osdProfile()->item_pos[OSD_CROSSHAIRS], .config.minmax = { 0, OSD_POS_MAX } },
|
||||
{ "osd_artificial_horizon", VAR_UINT16 | MASTER_VALUE, &osdProfile()->item_pos[OSD_ARTIFICIAL_HORIZON], .config.minmax = { 0, OSD_POS_MAX } },
|
||||
{ "osd_current_draw_pos", VAR_UINT16 | MASTER_VALUE, &osdProfile()->item_pos[OSD_CURRENT_DRAW], .config.minmax = { 0, OSD_POS_MAX } },
|
||||
{ "osd_horizon_pos", VAR_UINT16 | MASTER_VALUE, &osdProfile()->item_pos[OSD_ARTIFICIAL_HORIZON], .config.minmax = { 0, OSD_POS_MAX } },
|
||||
{ "osd_current_pos", VAR_UINT16 | MASTER_VALUE, &osdProfile()->item_pos[OSD_CURRENT_DRAW], .config.minmax = { 0, OSD_POS_MAX } },
|
||||
{ "osd_mah_drawn_pos", VAR_UINT16 | MASTER_VALUE, &osdProfile()->item_pos[OSD_MAH_DRAWN], .config.minmax = { 0, OSD_POS_MAX } },
|
||||
{ "osd_craft_name_pos", VAR_UINT16 | MASTER_VALUE, &osdProfile()->item_pos[OSD_CRAFT_NAME], .config.minmax = { 0, OSD_POS_MAX } },
|
||||
{ "osd_gps_speed_pos", VAR_UINT16 | MASTER_VALUE, &osdProfile()->item_pos[OSD_GPS_SPEED], .config.minmax = { 0, OSD_POS_MAX } },
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue