Mirror/betaflight
1
0
Fork 0
mirror of https://github.com/betaflight/betaflight.git synced 2025-07-15 04:15:44 +03:00
Code Issues Wiki Activity

Normalize all the line endings

Browse source
This commit is contained in:
Dominic Clifton 2014-09-15 23:40:17 +01:00
parent 4237370b60
commit d60183d91d
396 changed files with 158300 additions and 158300 deletions
Download patch file Download diff file Expand all files Collapse all files

518
lib/main/STM32_USB-FS-Device_Driver/inc/usb_core.h
View file

@ -1,259 +1,259 @@
/**
******************************************************************************
* @file usb_core.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Standard protocol processing functions prototypes
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_CORE_H
#define __USB_CORE_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
typedef enum _CONTROL_STATE
{
WAIT_SETUP, /* 0 */
SETTING_UP, /* 1 */
IN_DATA, /* 2 */
OUT_DATA, /* 3 */
LAST_IN_DATA, /* 4 */
LAST_OUT_DATA, /* 5 */
WAIT_STATUS_IN, /* 7 */
WAIT_STATUS_OUT, /* 8 */
STALLED, /* 9 */
PAUSE /* 10 */
} CONTROL_STATE; /* The state machine states of a control pipe */
typedef struct OneDescriptor
{
uint8_t *Descriptor;
uint16_t Descriptor_Size;
}
ONE_DESCRIPTOR, *PONE_DESCRIPTOR;
/* All the request process routines return a value of this type
If the return value is not SUCCESS or NOT_READY,
the software will STALL the correspond endpoint */
typedef enum _RESULT
{
USB_SUCCESS = 0, /* Process successfully */
USB_ERROR,
USB_UNSUPPORT,
USB_NOT_READY /* The process has not been finished, endpoint will be
NAK to further request */
} RESULT;
/*-*-*-*-*-*-*-*-*-*-* Definitions for endpoint level -*-*-*-*-*-*-*-*-*-*-*-*/
typedef struct _ENDPOINT_INFO
{
/* When send data out of the device,
CopyData() is used to get data buffer 'Length' bytes data
if Length is 0,
CopyData() returns the total length of the data
if the request is not supported, returns 0
(NEW Feature )
if CopyData() returns -1, the calling routine should not proceed
further and will resume the SETUP process by the class device
if Length is not 0,
CopyData() returns a pointer to indicate the data location
Usb_wLength is the data remain to be sent,
Usb_wOffset is the Offset of original data
When receive data from the host,
CopyData() is used to get user data buffer which is capable
of Length bytes data to copy data from the endpoint buffer.
if Length is 0,
CopyData() returns the available data length,
if Length is not 0,
CopyData() returns user buffer address
Usb_rLength is the data remain to be received,
Usb_rPointer is the Offset of data buffer
*/
uint16_t Usb_wLength;
uint16_t Usb_wOffset;
uint16_t PacketSize;
uint8_t *(*CopyData)(uint16_t Length);
}ENDPOINT_INFO;
/*-*-*-*-*-*-*-*-*-*-*-* Definitions for device level -*-*-*-*-*-*-*-*-*-*-*-*/
typedef struct _DEVICE
{
uint8_t Total_Endpoint; /* Number of endpoints that are used */
uint8_t Total_Configuration;/* Number of configuration available */
}
DEVICE;
typedef union
{
uint16_t w;
struct BW
{
uint8_t bb1;
uint8_t bb0;
}
bw;
} uint16_t_uint8_t;
typedef struct _DEVICE_INFO
{
uint8_t USBbmRequestType; /* bmRequestType */
uint8_t USBbRequest; /* bRequest */
uint16_t_uint8_t USBwValues; /* wValue */
uint16_t_uint8_t USBwIndexs; /* wIndex */
uint16_t_uint8_t USBwLengths; /* wLength */
uint8_t ControlState; /* of type CONTROL_STATE */
uint8_t Current_Feature;
uint8_t Current_Configuration; /* Selected configuration */
uint8_t Current_Interface; /* Selected interface of current configuration */
uint8_t Current_AlternateSetting;/* Selected Alternate Setting of current
interface*/
ENDPOINT_INFO Ctrl_Info;
}DEVICE_INFO;
typedef struct _DEVICE_PROP
{
void (*Init)(void); /* Initialize the device */
void (*Reset)(void); /* Reset routine of this device */
/* Device dependent process after the status stage */
void (*Process_Status_IN)(void);
void (*Process_Status_OUT)(void);
/* Procedure of process on setup stage of a class specified request with data stage */
/* All class specified requests with data stage are processed in Class_Data_Setup
Class_Data_Setup()
responses to check all special requests and fills ENDPOINT_INFO
according to the request
If IN tokens are expected, then wLength & wOffset will be filled
with the total transferring bytes and the starting position
If OUT tokens are expected, then rLength & rOffset will be filled
with the total expected bytes and the starting position in the buffer
If the request is valid, Class_Data_Setup returns SUCCESS, else UNSUPPORT
CAUTION:
Since GET_CONFIGURATION & GET_INTERFACE are highly related to
the individual classes, they will be checked and processed here.
*/
RESULT (*Class_Data_Setup)(uint8_t RequestNo);
/* Procedure of process on setup stage of a class specified request without data stage */
/* All class specified requests without data stage are processed in Class_NoData_Setup
Class_NoData_Setup
responses to check all special requests and perform the request
CAUTION:
Since SET_CONFIGURATION & SET_INTERFACE are highly related to
the individual classes, they will be checked and processed here.
*/
RESULT (*Class_NoData_Setup)(uint8_t RequestNo);
/*Class_Get_Interface_Setting
This function is used by the file usb_core.c to test if the selected Interface
and Alternate Setting (uint8_t Interface, uint8_t AlternateSetting) are supported by
the application.
This function is writing by user. It should return "SUCCESS" if the Interface
and Alternate Setting are supported by the application or "UNSUPPORT" if they
are not supported. */
RESULT (*Class_Get_Interface_Setting)(uint8_t Interface, uint8_t AlternateSetting);
uint8_t* (*GetDeviceDescriptor)(uint16_t Length);
uint8_t* (*GetConfigDescriptor)(uint16_t Length);
uint8_t* (*GetStringDescriptor)(uint16_t Length);
/* This field is not used in current library version. It is kept only for
compatibility with previous versions */
void* RxEP_buffer;
uint8_t MaxPacketSize;
}DEVICE_PROP;
typedef struct _USER_STANDARD_REQUESTS
{
void (*User_GetConfiguration)(void); /* Get Configuration */
void (*User_SetConfiguration)(void); /* Set Configuration */
void (*User_GetInterface)(void); /* Get Interface */
void (*User_SetInterface)(void); /* Set Interface */
void (*User_GetStatus)(void); /* Get Status */
void (*User_ClearFeature)(void); /* Clear Feature */
void (*User_SetEndPointFeature)(void); /* Set Endpoint Feature */
void (*User_SetDeviceFeature)(void); /* Set Device Feature */
void (*User_SetDeviceAddress)(void); /* Set Device Address */
}
USER_STANDARD_REQUESTS;
/* Exported constants --------------------------------------------------------*/
#define Type_Recipient (pInformation->USBbmRequestType & (REQUEST_TYPE | RECIPIENT))
#define Usb_rLength Usb_wLength
#define Usb_rOffset Usb_wOffset
#define USBwValue USBwValues.w
#define USBwValue0 USBwValues.bw.bb0
#define USBwValue1 USBwValues.bw.bb1
#define USBwIndex USBwIndexs.w
#define USBwIndex0 USBwIndexs.bw.bb0
#define USBwIndex1 USBwIndexs.bw.bb1
#define USBwLength USBwLengths.w
#define USBwLength0 USBwLengths.bw.bb0
#define USBwLength1 USBwLengths.bw.bb1
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
uint8_t Setup0_Process(void);
uint8_t Post0_Process(void);
uint8_t Out0_Process(void);
uint8_t In0_Process(void);
RESULT Standard_SetEndPointFeature(void);
RESULT Standard_SetDeviceFeature(void);
uint8_t *Standard_GetConfiguration(uint16_t Length);
RESULT Standard_SetConfiguration(void);
uint8_t *Standard_GetInterface(uint16_t Length);
RESULT Standard_SetInterface(void);
uint8_t *Standard_GetDescriptorData(uint16_t Length, PONE_DESCRIPTOR pDesc);
uint8_t *Standard_GetStatus(uint16_t Length);
RESULT Standard_ClearFeature(void);
void SetDeviceAddress(uint8_t);
void NOP_Process(void);
extern DEVICE_PROP Device_Property;
extern USER_STANDARD_REQUESTS User_Standard_Requests;
extern DEVICE Device_Table;
extern DEVICE_INFO Device_Info;
/* cells saving status during interrupt servicing */
extern __IO uint16_t SaveRState;
extern __IO uint16_t SaveTState;
#endif /* __USB_CORE_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usb_core.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Standard protocol processing functions prototypes
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_CORE_H
#define __USB_CORE_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
typedef enum _CONTROL_STATE
{
WAIT_SETUP, /* 0 */
SETTING_UP, /* 1 */
IN_DATA, /* 2 */
OUT_DATA, /* 3 */
LAST_IN_DATA, /* 4 */
LAST_OUT_DATA, /* 5 */
WAIT_STATUS_IN, /* 7 */
WAIT_STATUS_OUT, /* 8 */
STALLED, /* 9 */
PAUSE /* 10 */
} CONTROL_STATE; /* The state machine states of a control pipe */
typedef struct OneDescriptor
{
uint8_t *Descriptor;
uint16_t Descriptor_Size;
}
ONE_DESCRIPTOR, *PONE_DESCRIPTOR;
/* All the request process routines return a value of this type
If the return value is not SUCCESS or NOT_READY,
the software will STALL the correspond endpoint */
typedef enum _RESULT
{
USB_SUCCESS = 0, /* Process successfully */
USB_ERROR,
USB_UNSUPPORT,
USB_NOT_READY /* The process has not been finished, endpoint will be
NAK to further request */
} RESULT;
/*-*-*-*-*-*-*-*-*-*-* Definitions for endpoint level -*-*-*-*-*-*-*-*-*-*-*-*/
typedef struct _ENDPOINT_INFO
{
/* When send data out of the device,
CopyData() is used to get data buffer 'Length' bytes data
if Length is 0,
CopyData() returns the total length of the data
if the request is not supported, returns 0
(NEW Feature )
if CopyData() returns -1, the calling routine should not proceed
further and will resume the SETUP process by the class device
if Length is not 0,
CopyData() returns a pointer to indicate the data location
Usb_wLength is the data remain to be sent,
Usb_wOffset is the Offset of original data
When receive data from the host,
CopyData() is used to get user data buffer which is capable
of Length bytes data to copy data from the endpoint buffer.
if Length is 0,
CopyData() returns the available data length,
if Length is not 0,
CopyData() returns user buffer address
Usb_rLength is the data remain to be received,
Usb_rPointer is the Offset of data buffer
*/
uint16_t Usb_wLength;
uint16_t Usb_wOffset;
uint16_t PacketSize;
uint8_t *(*CopyData)(uint16_t Length);
}ENDPOINT_INFO;
/*-*-*-*-*-*-*-*-*-*-*-* Definitions for device level -*-*-*-*-*-*-*-*-*-*-*-*/
typedef struct _DEVICE
{
uint8_t Total_Endpoint; /* Number of endpoints that are used */
uint8_t Total_Configuration;/* Number of configuration available */
}
DEVICE;
typedef union
{
uint16_t w;
struct BW
{
uint8_t bb1;
uint8_t bb0;
}
bw;
} uint16_t_uint8_t;
typedef struct _DEVICE_INFO
{
uint8_t USBbmRequestType; /* bmRequestType */
uint8_t USBbRequest; /* bRequest */
uint16_t_uint8_t USBwValues; /* wValue */
uint16_t_uint8_t USBwIndexs; /* wIndex */
uint16_t_uint8_t USBwLengths; /* wLength */
uint8_t ControlState; /* of type CONTROL_STATE */
uint8_t Current_Feature;
uint8_t Current_Configuration; /* Selected configuration */
uint8_t Current_Interface; /* Selected interface of current configuration */
uint8_t Current_AlternateSetting;/* Selected Alternate Setting of current
interface*/
ENDPOINT_INFO Ctrl_Info;
}DEVICE_INFO;
typedef struct _DEVICE_PROP
{
void (*Init)(void); /* Initialize the device */
void (*Reset)(void); /* Reset routine of this device */
/* Device dependent process after the status stage */
void (*Process_Status_IN)(void);
void (*Process_Status_OUT)(void);
/* Procedure of process on setup stage of a class specified request with data stage */
/* All class specified requests with data stage are processed in Class_Data_Setup
Class_Data_Setup()
responses to check all special requests and fills ENDPOINT_INFO
according to the request
If IN tokens are expected, then wLength & wOffset will be filled
with the total transferring bytes and the starting position
If OUT tokens are expected, then rLength & rOffset will be filled
with the total expected bytes and the starting position in the buffer
If the request is valid, Class_Data_Setup returns SUCCESS, else UNSUPPORT
CAUTION:
Since GET_CONFIGURATION & GET_INTERFACE are highly related to
the individual classes, they will be checked and processed here.
*/
RESULT (*Class_Data_Setup)(uint8_t RequestNo);
/* Procedure of process on setup stage of a class specified request without data stage */
/* All class specified requests without data stage are processed in Class_NoData_Setup
Class_NoData_Setup
responses to check all special requests and perform the request
CAUTION:
Since SET_CONFIGURATION & SET_INTERFACE are highly related to
the individual classes, they will be checked and processed here.
*/
RESULT (*Class_NoData_Setup)(uint8_t RequestNo);
/*Class_Get_Interface_Setting
This function is used by the file usb_core.c to test if the selected Interface
and Alternate Setting (uint8_t Interface, uint8_t AlternateSetting) are supported by
the application.
This function is writing by user. It should return "SUCCESS" if the Interface
and Alternate Setting are supported by the application or "UNSUPPORT" if they
are not supported. */
RESULT (*Class_Get_Interface_Setting)(uint8_t Interface, uint8_t AlternateSetting);
uint8_t* (*GetDeviceDescriptor)(uint16_t Length);
uint8_t* (*GetConfigDescriptor)(uint16_t Length);
uint8_t* (*GetStringDescriptor)(uint16_t Length);
/* This field is not used in current library version. It is kept only for
compatibility with previous versions */
void* RxEP_buffer;
uint8_t MaxPacketSize;
}DEVICE_PROP;
typedef struct _USER_STANDARD_REQUESTS
{
void (*User_GetConfiguration)(void); /* Get Configuration */
void (*User_SetConfiguration)(void); /* Set Configuration */
void (*User_GetInterface)(void); /* Get Interface */
void (*User_SetInterface)(void); /* Set Interface */
void (*User_GetStatus)(void); /* Get Status */
void (*User_ClearFeature)(void); /* Clear Feature */
void (*User_SetEndPointFeature)(void); /* Set Endpoint Feature */
void (*User_SetDeviceFeature)(void); /* Set Device Feature */
void (*User_SetDeviceAddress)(void); /* Set Device Address */
}
USER_STANDARD_REQUESTS;
/* Exported constants --------------------------------------------------------*/
#define Type_Recipient (pInformation->USBbmRequestType & (REQUEST_TYPE | RECIPIENT))
#define Usb_rLength Usb_wLength
#define Usb_rOffset Usb_wOffset
#define USBwValue USBwValues.w
#define USBwValue0 USBwValues.bw.bb0
#define USBwValue1 USBwValues.bw.bb1
#define USBwIndex USBwIndexs.w
#define USBwIndex0 USBwIndexs.bw.bb0
#define USBwIndex1 USBwIndexs.bw.bb1
#define USBwLength USBwLengths.w
#define USBwLength0 USBwLengths.bw.bb0
#define USBwLength1 USBwLengths.bw.bb1
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
uint8_t Setup0_Process(void);
uint8_t Post0_Process(void);
uint8_t Out0_Process(void);
uint8_t In0_Process(void);
RESULT Standard_SetEndPointFeature(void);
RESULT Standard_SetDeviceFeature(void);
uint8_t *Standard_GetConfiguration(uint16_t Length);
RESULT Standard_SetConfiguration(void);
uint8_t *Standard_GetInterface(uint16_t Length);
RESULT Standard_SetInterface(void);
uint8_t *Standard_GetDescriptorData(uint16_t Length, PONE_DESCRIPTOR pDesc);
uint8_t *Standard_GetStatus(uint16_t Length);
RESULT Standard_ClearFeature(void);
void SetDeviceAddress(uint8_t);
void NOP_Process(void);
extern DEVICE_PROP Device_Property;
extern USER_STANDARD_REQUESTS User_Standard_Requests;
extern DEVICE Device_Table;
extern DEVICE_INFO Device_Info;
/* cells saving status during interrupt servicing */
extern __IO uint16_t SaveRState;
extern __IO uint16_t SaveTState;
#endif /* __USB_CORE_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

184
lib/main/STM32_USB-FS-Device_Driver/inc/usb_def.h
View file

@ -1,92 +1,92 @@
/**
******************************************************************************
* @file usb_def.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Definitions related to USB Core
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_DEF_H
#define __USB_DEF_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
typedef enum _RECIPIENT_TYPE
{
DEVICE_RECIPIENT, /* Recipient device */
INTERFACE_RECIPIENT, /* Recipient interface */
ENDPOINT_RECIPIENT, /* Recipient endpoint */
OTHER_RECIPIENT
} RECIPIENT_TYPE;
typedef enum _STANDARD_REQUESTS
{
GET_STATUS = 0,
CLEAR_FEATURE,
RESERVED1,
SET_FEATURE,
RESERVED2,
SET_ADDRESS,
GET_DESCRIPTOR,
SET_DESCRIPTOR,
GET_CONFIGURATION,
SET_CONFIGURATION,
GET_INTERFACE,
SET_INTERFACE,
TOTAL_sREQUEST, /* Total number of Standard request */
SYNCH_FRAME = 12
} STANDARD_REQUESTS;
/* Definition of "USBwValue" */
typedef enum _DESCRIPTOR_TYPE
{
DEVICE_DESCRIPTOR = 1,
CONFIG_DESCRIPTOR,
STRING_DESCRIPTOR,
INTERFACE_DESCRIPTOR,
ENDPOINT_DESCRIPTOR
} DESCRIPTOR_TYPE;
/* Feature selector of a SET_FEATURE or CLEAR_FEATURE */
typedef enum _FEATURE_SELECTOR
{
ENDPOINT_STALL,
DEVICE_REMOTE_WAKEUP
} FEATURE_SELECTOR;
/* Exported constants --------------------------------------------------------*/
/* Definition of "USBbmRequestType" */
#define REQUEST_TYPE 0x60 /* Mask to get request type */
#define STANDARD_REQUEST 0x00 /* Standard request */
#define CLASS_REQUEST 0x20 /* Class request */
#define VENDOR_REQUEST 0x40 /* Vendor request */
#define RECIPIENT 0x1F /* Mask to get recipient */
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
#endif /* __USB_DEF_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usb_def.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Definitions related to USB Core
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_DEF_H
#define __USB_DEF_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
typedef enum _RECIPIENT_TYPE
{
DEVICE_RECIPIENT, /* Recipient device */
INTERFACE_RECIPIENT, /* Recipient interface */
ENDPOINT_RECIPIENT, /* Recipient endpoint */
OTHER_RECIPIENT
} RECIPIENT_TYPE;
typedef enum _STANDARD_REQUESTS
{
GET_STATUS = 0,
CLEAR_FEATURE,
RESERVED1,
SET_FEATURE,
RESERVED2,
SET_ADDRESS,
GET_DESCRIPTOR,
SET_DESCRIPTOR,
GET_CONFIGURATION,
SET_CONFIGURATION,
GET_INTERFACE,
SET_INTERFACE,
TOTAL_sREQUEST, /* Total number of Standard request */
SYNCH_FRAME = 12
} STANDARD_REQUESTS;
/* Definition of "USBwValue" */
typedef enum _DESCRIPTOR_TYPE
{
DEVICE_DESCRIPTOR = 1,
CONFIG_DESCRIPTOR,
STRING_DESCRIPTOR,
INTERFACE_DESCRIPTOR,
ENDPOINT_DESCRIPTOR
} DESCRIPTOR_TYPE;
/* Feature selector of a SET_FEATURE or CLEAR_FEATURE */
typedef enum _FEATURE_SELECTOR
{
ENDPOINT_STALL,
DEVICE_REMOTE_WAKEUP
} FEATURE_SELECTOR;
/* Exported constants --------------------------------------------------------*/
/* Definition of "USBbmRequestType" */
#define REQUEST_TYPE 0x60 /* Mask to get request type */
#define STANDARD_REQUEST 0x00 /* Standard request */
#define CLASS_REQUEST 0x20 /* Class request */
#define VENDOR_REQUEST 0x40 /* Vendor request */
#define RECIPIENT 0x1F /* Mask to get recipient */
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
#endif /* __USB_DEF_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

124
lib/main/STM32_USB-FS-Device_Driver/inc/usb_init.h
View file

@ -1,62 +1,62 @@
/**
******************************************************************************
* @file usb_init.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Initialization routines & global variables
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_INIT_H
#define __USB_INIT_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
void USB_Init(void);
/* External variables --------------------------------------------------------*/
/* The number of current endpoint, it will be used to specify an endpoint */
extern uint8_t EPindex;
/* The number of current device, it is an index to the Device_Table */
/*extern uint8_t Device_no; */
/* Points to the DEVICE_INFO structure of current device */
/* The purpose of this register is to speed up the execution */
extern DEVICE_INFO* pInformation;
/* Points to the DEVICE_PROP structure of current device */
/* The purpose of this register is to speed up the execution */
extern DEVICE_PROP* pProperty;
/* Temporary save the state of Rx & Tx status. */
/* Whenever the Rx or Tx state is changed, its value is saved */
/* in this variable first and will be set to the EPRB or EPRA */
/* at the end of interrupt process */
extern USER_STANDARD_REQUESTS *pUser_Standard_Requests;
extern uint16_t SaveState ;
extern uint16_t wInterrupt_Mask;
#endif /* __USB_INIT_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usb_init.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Initialization routines & global variables
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_INIT_H
#define __USB_INIT_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
void USB_Init(void);
/* External variables --------------------------------------------------------*/
/* The number of current endpoint, it will be used to specify an endpoint */
extern uint8_t EPindex;
/* The number of current device, it is an index to the Device_Table */
/*extern uint8_t Device_no; */
/* Points to the DEVICE_INFO structure of current device */
/* The purpose of this register is to speed up the execution */
extern DEVICE_INFO* pInformation;
/* Points to the DEVICE_PROP structure of current device */
/* The purpose of this register is to speed up the execution */
extern DEVICE_PROP* pProperty;
/* Temporary save the state of Rx & Tx status. */
/* Whenever the Rx or Tx state is changed, its value is saved */
/* in this variable first and will be set to the EPRB or EPRA */
/* at the end of interrupt process */
extern USER_STANDARD_REQUESTS *pUser_Standard_Requests;
extern uint16_t SaveState ;
extern uint16_t wInterrupt_Mask;
#endif /* __USB_INIT_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

90
lib/main/STM32_USB-FS-Device_Driver/inc/usb_int.h
View file

@ -1,45 +1,45 @@
/**
******************************************************************************
* @file usb_int.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Endpoint CTR (Low and High) interrupt's service routines prototypes
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_INT_H
#define __USB_INT_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
void CTR_LP(void);
void CTR_HP(void);
/* External variables --------------------------------------------------------*/
#endif /* __USB_INT_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usb_int.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Endpoint CTR (Low and High) interrupt's service routines prototypes
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_INT_H
#define __USB_INT_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
void CTR_LP(void);
void CTR_HP(void);
/* External variables --------------------------------------------------------*/
#endif /* __USB_INT_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

104
lib/main/STM32_USB-FS-Device_Driver/inc/usb_lib.h
View file

@ -1,52 +1,52 @@
/**
******************************************************************************
* @file usb_lib.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief USB library include files
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_LIB_H
#define __USB_LIB_H
/* Includes ------------------------------------------------------------------*/
#include "hw_config.h"
#include "usb_type.h"
#include "usb_regs.h"
#include "usb_def.h"
#include "usb_core.h"
#include "usb_init.h"
#include "usb_sil.h"
#include "usb_mem.h"
#include "usb_int.h"
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/* External variables --------------------------------------------------------*/
#endif /* __USB_LIB_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usb_lib.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief USB library include files
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_LIB_H
#define __USB_LIB_H
/* Includes ------------------------------------------------------------------*/
#include "hw_config.h"
#include "usb_type.h"
#include "usb_regs.h"
#include "usb_def.h"
#include "usb_core.h"
#include "usb_init.h"
#include "usb_sil.h"
#include "usb_mem.h"
#include "usb_int.h"
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/* External variables --------------------------------------------------------*/
#endif /* __USB_LIB_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

90
lib/main/STM32_USB-FS-Device_Driver/inc/usb_mem.h
View file

@ -1,45 +1,45 @@
/**
******************************************************************************
* @file usb_mem.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Utility prototypes functions for memory/PMA transfers
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_MEM_H
#define __USB_MEM_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
void UserToPMABufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
void PMAToUserBufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
/* External variables --------------------------------------------------------*/
#endif /*__USB_MEM_H*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usb_mem.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Utility prototypes functions for memory/PMA transfers
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_MEM_H
#define __USB_MEM_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
void UserToPMABufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
void PMAToUserBufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
/* External variables --------------------------------------------------------*/
#endif /*__USB_MEM_H*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1360
lib/main/STM32_USB-FS-Device_Driver/inc/usb_regs.h
View file

File diff suppressed because it is too large Load diff

94
lib/main/STM32_USB-FS-Device_Driver/inc/usb_sil.h
View file

@ -1,47 +1,47 @@
/**
******************************************************************************
* @file usb_sil.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Simplified Interface Layer function prototypes.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_SIL_H
#define __USB_SIL_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
uint32_t USB_SIL_Init(void);
uint32_t USB_SIL_Write(uint8_t bEpAddr, uint8_t* pBufferPointer, uint32_t wBufferSize);
uint32_t USB_SIL_Read(uint8_t bEpAddr, uint8_t* pBufferPointer);
/* External variables --------------------------------------------------------*/
#endif /* __USB_SIL_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usb_sil.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Simplified Interface Layer function prototypes.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_SIL_H
#define __USB_SIL_H
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
uint32_t USB_SIL_Init(void);
uint32_t USB_SIL_Write(uint8_t bEpAddr, uint8_t* pBufferPointer, uint32_t wBufferSize);
uint32_t USB_SIL_Read(uint8_t bEpAddr, uint8_t* pBufferPointer);
/* External variables --------------------------------------------------------*/
#endif /* __USB_SIL_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

108
lib/main/STM32_USB-FS-Device_Driver/inc/usb_type.h
View file

@ -1,54 +1,54 @@
/**
******************************************************************************
* @file usb_type.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Type definitions used by the USB Library
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_TYPE_H
#define __USB_TYPE_H
/* Includes ------------------------------------------------------------------*/
#include "usb_conf.h"
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
#ifndef NULL
#define NULL ((void *)0)
#endif
typedef enum
{
FALSE = 0, TRUE = !FALSE
}
boolean;
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/* External variables --------------------------------------------------------*/
#endif /* __USB_TYPE_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usb_type.h
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Type definitions used by the USB Library
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_TYPE_H
#define __USB_TYPE_H
/* Includes ------------------------------------------------------------------*/
#include "usb_conf.h"
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
#ifndef NULL
#define NULL ((void *)0)
#endif
typedef enum
{
FALSE = 0, TRUE = !FALSE
}
boolean;
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/* External variables --------------------------------------------------------*/
#endif /* __USB_TYPE_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

2066
lib/main/STM32_USB-FS-Device_Driver/src/usb_core.c
View file

File diff suppressed because it is too large Load diff

152
lib/main/STM32_USB-FS-Device_Driver/src/usb_init.c
View file

@ -1,76 +1,76 @@
/**
******************************************************************************
* @file usb_init.c
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Initialization routines & global variables
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usb_lib.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* The number of current endpoint, it will be used to specify an endpoint */
uint8_t EPindex;
/* The number of current device, it is an index to the Device_Table */
/* uint8_t Device_no; */
/* Points to the DEVICE_INFO structure of current device */
/* The purpose of this register is to speed up the execution */
DEVICE_INFO *pInformation;
/* Points to the DEVICE_PROP structure of current device */
/* The purpose of this register is to speed up the execution */
DEVICE_PROP *pProperty;
/* Temporary save the state of Rx & Tx status. */
/* Whenever the Rx or Tx state is changed, its value is saved */
/* in this variable first and will be set to the EPRB or EPRA */
/* at the end of interrupt process */
uint16_t SaveState ;
uint16_t wInterrupt_Mask;
DEVICE_INFO Device_Info;
USER_STANDARD_REQUESTS *pUser_Standard_Requests;
/* Extern variables ----------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name : USB_Init
* Description : USB system initialization
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void USB_Init(void)
{
pInformation = &Device_Info;
pInformation->ControlState = 2;
pProperty = &Device_Property;
pUser_Standard_Requests = &User_Standard_Requests;
/* Initialize devices one by one */
pProperty->Init();
}
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usb_init.c
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Initialization routines & global variables
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usb_lib.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* The number of current endpoint, it will be used to specify an endpoint */
uint8_t EPindex;
/* The number of current device, it is an index to the Device_Table */
/* uint8_t Device_no; */
/* Points to the DEVICE_INFO structure of current device */
/* The purpose of this register is to speed up the execution */
DEVICE_INFO *pInformation;
/* Points to the DEVICE_PROP structure of current device */
/* The purpose of this register is to speed up the execution */
DEVICE_PROP *pProperty;
/* Temporary save the state of Rx & Tx status. */
/* Whenever the Rx or Tx state is changed, its value is saved */
/* in this variable first and will be set to the EPRB or EPRA */
/* at the end of interrupt process */
uint16_t SaveState ;
uint16_t wInterrupt_Mask;
DEVICE_INFO Device_Info;
USER_STANDARD_REQUESTS *pUser_Standard_Requests;
/* Extern variables ----------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name : USB_Init
* Description : USB system initialization
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void USB_Init(void)
{
pInformation = &Device_Info;
pInformation->ControlState = 2;
pProperty = &Device_Property;
pUser_Standard_Requests = &User_Standard_Requests;
/* Initialize devices one by one */
pProperty->Init();
}
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

390
lib/main/STM32_USB-FS-Device_Driver/src/usb_int.c
View file

@ -1,195 +1,195 @@
/**
******************************************************************************
* @file usb_int.c
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Endpoint CTR (Low and High) interrupt's service routines
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usb_lib.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
__IO uint16_t SaveRState;
__IO uint16_t SaveTState;
/* Extern variables ----------------------------------------------------------*/
extern void (*pEpInt_IN[7])(void); /* Handles IN interrupts */
extern void (*pEpInt_OUT[7])(void); /* Handles OUT interrupts */
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name : CTR_LP.
* Description : Low priority Endpoint Correct Transfer interrupt's service
* routine.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void CTR_LP(void)
{
__IO uint16_t wEPVal = 0;
/* stay in loop while pending interrupts */
while (((wIstr = _GetISTR()) & ISTR_CTR) != 0)
{
/* extract highest priority endpoint number */
EPindex = (uint8_t)(wIstr & ISTR_EP_ID);
if (EPindex == 0)
{
/* Decode and service control endpoint interrupt */
/* calling related service routine */
/* (Setup0_Process, In0_Process, Out0_Process) */
/* save RX & TX status */
/* and set both to NAK */
SaveRState = _GetENDPOINT(ENDP0);
SaveTState = SaveRState & EPTX_STAT;
SaveRState &= EPRX_STAT;
_SetEPRxTxStatus(ENDP0,EP_RX_NAK,EP_TX_NAK);
/* DIR bit = origin of the interrupt */
if ((wIstr & ISTR_DIR) == 0)
{
/* DIR = 0 */
/* DIR = 0 => IN int */
/* DIR = 0 implies that (EP_CTR_TX = 1) always */
_ClearEP_CTR_TX(ENDP0);
In0_Process();
/* before terminate set Tx & Rx status */
_SetEPRxTxStatus(ENDP0,SaveRState,SaveTState);
return;
}
else
{
/* DIR = 1 */
/* DIR = 1 & CTR_RX => SETUP or OUT int */
/* DIR = 1 & (CTR_TX | CTR_RX) => 2 int pending */
wEPVal = _GetENDPOINT(ENDP0);
if ((wEPVal &EP_SETUP) != 0)
{
_ClearEP_CTR_RX(ENDP0); /* SETUP bit kept frozen while CTR_RX = 1 */
Setup0_Process();
/* before terminate set Tx & Rx status */
_SetEPRxTxStatus(ENDP0,SaveRState,SaveTState);
return;
}
else if ((wEPVal & EP_CTR_RX) != 0)
{
_ClearEP_CTR_RX(ENDP0);
Out0_Process();
/* before terminate set Tx & Rx status */
_SetEPRxTxStatus(ENDP0,SaveRState,SaveTState);
return;
}
}
}/* if(EPindex == 0) */
else
{
/* Decode and service non control endpoints interrupt */
/* process related endpoint register */
wEPVal = _GetENDPOINT(EPindex);
if ((wEPVal & EP_CTR_RX) != 0)
{
/* clear int flag */
_ClearEP_CTR_RX(EPindex);
/* call OUT service function */
(*pEpInt_OUT[EPindex-1])();
} /* if((wEPVal & EP_CTR_RX) */
if ((wEPVal & EP_CTR_TX) != 0)
{
/* clear int flag */
_ClearEP_CTR_TX(EPindex);
/* call IN service function */
(*pEpInt_IN[EPindex-1])();
} /* if((wEPVal & EP_CTR_TX) != 0) */
}/* if(EPindex == 0) else */
}/* while(...) */
}
/*******************************************************************************
* Function Name : CTR_HP.
* Description : High Priority Endpoint Correct Transfer interrupt's service
* routine.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void CTR_HP(void)
{
uint32_t wEPVal = 0;
while (((wIstr = _GetISTR()) & ISTR_CTR) != 0)
{
_SetISTR((uint16_t)CLR_CTR); /* clear CTR flag */
/* extract highest priority endpoint number */
EPindex = (uint8_t)(wIstr & ISTR_EP_ID);
/* process related endpoint register */
wEPVal = _GetENDPOINT(EPindex);
if ((wEPVal & EP_CTR_RX) != 0)
{
/* clear int flag */
_ClearEP_CTR_RX(EPindex);
/* call OUT service function */
(*pEpInt_OUT[EPindex-1])();
} /* if((wEPVal & EP_CTR_RX) */
else if ((wEPVal & EP_CTR_TX) != 0)
{
/* clear int flag */
_ClearEP_CTR_TX(EPindex);
/* call IN service function */
(*pEpInt_IN[EPindex-1])();
} /* if((wEPVal & EP_CTR_TX) != 0) */
}/* while(...) */
}
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usb_int.c
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Endpoint CTR (Low and High) interrupt's service routines
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usb_lib.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
__IO uint16_t SaveRState;
__IO uint16_t SaveTState;
/* Extern variables ----------------------------------------------------------*/
extern void (*pEpInt_IN[7])(void); /* Handles IN interrupts */
extern void (*pEpInt_OUT[7])(void); /* Handles OUT interrupts */
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name : CTR_LP.
* Description : Low priority Endpoint Correct Transfer interrupt's service
* routine.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void CTR_LP(void)
{
__IO uint16_t wEPVal = 0;
/* stay in loop while pending interrupts */
while (((wIstr = _GetISTR()) & ISTR_CTR) != 0)
{
/* extract highest priority endpoint number */
EPindex = (uint8_t)(wIstr & ISTR_EP_ID);
if (EPindex == 0)
{
/* Decode and service control endpoint interrupt */
/* calling related service routine */
/* (Setup0_Process, In0_Process, Out0_Process) */
/* save RX & TX status */
/* and set both to NAK */
SaveRState = _GetENDPOINT(ENDP0);
SaveTState = SaveRState & EPTX_STAT;
SaveRState &= EPRX_STAT;
_SetEPRxTxStatus(ENDP0,EP_RX_NAK,EP_TX_NAK);
/* DIR bit = origin of the interrupt */
if ((wIstr & ISTR_DIR) == 0)
{
/* DIR = 0 */
/* DIR = 0 => IN int */
/* DIR = 0 implies that (EP_CTR_TX = 1) always */
_ClearEP_CTR_TX(ENDP0);
In0_Process();
/* before terminate set Tx & Rx status */
_SetEPRxTxStatus(ENDP0,SaveRState,SaveTState);
return;
}
else
{
/* DIR = 1 */
/* DIR = 1 & CTR_RX => SETUP or OUT int */
/* DIR = 1 & (CTR_TX | CTR_RX) => 2 int pending */
wEPVal = _GetENDPOINT(ENDP0);
if ((wEPVal &EP_SETUP) != 0)
{
_ClearEP_CTR_RX(ENDP0); /* SETUP bit kept frozen while CTR_RX = 1 */
Setup0_Process();
/* before terminate set Tx & Rx status */
_SetEPRxTxStatus(ENDP0,SaveRState,SaveTState);
return;
}
else if ((wEPVal & EP_CTR_RX) != 0)
{
_ClearEP_CTR_RX(ENDP0);
Out0_Process();
/* before terminate set Tx & Rx status */
_SetEPRxTxStatus(ENDP0,SaveRState,SaveTState);
return;
}
}
}/* if(EPindex == 0) */
else
{
/* Decode and service non control endpoints interrupt */
/* process related endpoint register */
wEPVal = _GetENDPOINT(EPindex);
if ((wEPVal & EP_CTR_RX) != 0)
{
/* clear int flag */
_ClearEP_CTR_RX(EPindex);
/* call OUT service function */
(*pEpInt_OUT[EPindex-1])();
} /* if((wEPVal & EP_CTR_RX) */
if ((wEPVal & EP_CTR_TX) != 0)
{
/* clear int flag */
_ClearEP_CTR_TX(EPindex);
/* call IN service function */
(*pEpInt_IN[EPindex-1])();
} /* if((wEPVal & EP_CTR_TX) != 0) */
}/* if(EPindex == 0) else */
}/* while(...) */
}
/*******************************************************************************
* Function Name : CTR_HP.
* Description : High Priority Endpoint Correct Transfer interrupt's service
* routine.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void CTR_HP(void)
{
uint32_t wEPVal = 0;
while (((wIstr = _GetISTR()) & ISTR_CTR) != 0)
{
_SetISTR((uint16_t)CLR_CTR); /* clear CTR flag */
/* extract highest priority endpoint number */
EPindex = (uint8_t)(wIstr & ISTR_EP_ID);
/* process related endpoint register */
wEPVal = _GetENDPOINT(EPindex);
if ((wEPVal & EP_CTR_RX) != 0)
{
/* clear int flag */
_ClearEP_CTR_RX(EPindex);
/* call OUT service function */
(*pEpInt_OUT[EPindex-1])();
} /* if((wEPVal & EP_CTR_RX) */
else if ((wEPVal & EP_CTR_TX) != 0)
{
/* clear int flag */
_ClearEP_CTR_TX(EPindex);
/* call IN service function */
(*pEpInt_IN[EPindex-1])();
} /* if((wEPVal & EP_CTR_TX) != 0) */
}/* while(...) */
}
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

174
lib/main/STM32_USB-FS-Device_Driver/src/usb_mem.c
View file

@ -1,87 +1,87 @@
/**
******************************************************************************
* @file usb_mem.c
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Utility functions for memory transfers to/from PMA
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usb_lib.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Extern variables ----------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name : UserToPMABufferCopy
* Description : Copy a buffer from user memory area to packet memory area (PMA)
* Input : - pbUsrBuf: pointer to user memory area.
* - wPMABufAddr: address into PMA.
* - wNBytes: no. of bytes to be copied.
* Output : None.
* Return : None .
*******************************************************************************/
void UserToPMABufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
{
uint32_t n = (wNBytes + 1) >> 1; /* n = (wNBytes + 1) / 2 */
uint32_t i, temp1, temp2;
uint16_t *pdwVal;
pdwVal = (uint16_t *)(wPMABufAddr * 2 + PMAAddr);
for (i = n; i != 0; i--)
{
temp1 = (uint16_t) * pbUsrBuf;
pbUsrBuf++;
temp2 = temp1 | (uint16_t) * pbUsrBuf << 8;
*pdwVal++ = temp2;
pdwVal++;
pbUsrBuf++;
}
}
/*******************************************************************************
* Function Name : PMAToUserBufferCopy
* Description : Copy a buffer from user memory area to packet memory area (PMA)
* Input : - pbUsrBuf = pointer to user memory area.
* - wPMABufAddr = address into PMA.
* - wNBytes = no. of bytes to be copied.
* Output : None.
* Return : None.
*******************************************************************************/
void PMAToUserBufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
{
uint32_t n = (wNBytes + 1) >> 1;/* /2*/
uint32_t i;
uint32_t *pdwVal;
pdwVal = (uint32_t *)(wPMABufAddr * 2 + PMAAddr);
for (i = n; i != 0; i--)
{
*(uint16_t*)pbUsrBuf++ = *pdwVal++;
pbUsrBuf++;
}
}
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usb_mem.c
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Utility functions for memory transfers to/from PMA
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usb_lib.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Extern variables ----------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name : UserToPMABufferCopy
* Description : Copy a buffer from user memory area to packet memory area (PMA)
* Input : - pbUsrBuf: pointer to user memory area.
* - wPMABufAddr: address into PMA.
* - wNBytes: no. of bytes to be copied.
* Output : None.
* Return : None .
*******************************************************************************/
void UserToPMABufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
{
uint32_t n = (wNBytes + 1) >> 1; /* n = (wNBytes + 1) / 2 */
uint32_t i, temp1, temp2;
uint16_t *pdwVal;
pdwVal = (uint16_t *)(wPMABufAddr * 2 + PMAAddr);
for (i = n; i != 0; i--)
{
temp1 = (uint16_t) * pbUsrBuf;
pbUsrBuf++;
temp2 = temp1 | (uint16_t) * pbUsrBuf << 8;
*pdwVal++ = temp2;
pdwVal++;
pbUsrBuf++;
}
}
/*******************************************************************************
* Function Name : PMAToUserBufferCopy
* Description : Copy a buffer from user memory area to packet memory area (PMA)
* Input : - pbUsrBuf = pointer to user memory area.
* - wPMABufAddr = address into PMA.
* - wNBytes = no. of bytes to be copied.
* Output : None.
* Return : None.
*******************************************************************************/
void PMAToUserBufferCopy(uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
{
uint32_t n = (wNBytes + 1) >> 1;/* /2*/
uint32_t i;
uint32_t *pdwVal;
pdwVal = (uint32_t *)(wPMABufAddr * 2 + PMAAddr);
for (i = n; i != 0; i--)
{
*(uint16_t*)pbUsrBuf++ = *pdwVal++;
pbUsrBuf++;
}
}
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1520
lib/main/STM32_USB-FS-Device_Driver/src/usb_regs.c
View file

File diff suppressed because it is too large Load diff

206
lib/main/STM32_USB-FS-Device_Driver/src/usb_sil.c
View file

@ -1,103 +1,103 @@
/**
******************************************************************************
* @file usb_sil.c
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Simplified Interface Layer for Global Initialization and Endpoint
* Rea/Write operations.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usb_lib.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Extern variables ----------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name : USB_SIL_Init
* Description : Initialize the USB Device IP and the Endpoint 0.
* Input : None.
* Output : None.
* Return : Status.
*******************************************************************************/
uint32_t USB_SIL_Init(void)
{
/* USB interrupts initialization */
/* clear pending interrupts */
_SetISTR(0);
wInterrupt_Mask = IMR_MSK;
/* set interrupts mask */
_SetCNTR(wInterrupt_Mask);
return 0;
}
/*******************************************************************************
* Function Name : USB_SIL_Write
* Description : Write a buffer of data to a selected endpoint.
* Input : - bEpAddr: The address of the non control endpoint.
* - pBufferPointer: The pointer to the buffer of data to be written
* to the endpoint.
* - wBufferSize: Number of data to be written (in bytes).
* Output : None.
* Return : Status.
*******************************************************************************/
uint32_t USB_SIL_Write(uint8_t bEpAddr, uint8_t* pBufferPointer, uint32_t wBufferSize)
{
/* Use the memory interface function to write to the selected endpoint */
UserToPMABufferCopy(pBufferPointer, GetEPTxAddr(bEpAddr & 0x7F), wBufferSize);
/* Update the data length in the control register */
SetEPTxCount((bEpAddr & 0x7F), wBufferSize);
return 0;
}
/*******************************************************************************
* Function Name : USB_SIL_Read
* Description : Write a buffer of data to a selected endpoint.
* Input : - bEpAddr: The address of the non control endpoint.
* - pBufferPointer: The pointer to which will be saved the
* received data buffer.
* Output : None.
* Return : Number of received data (in Bytes).
*******************************************************************************/
uint32_t USB_SIL_Read(uint8_t bEpAddr, uint8_t* pBufferPointer)
{
uint32_t DataLength = 0;
/* Get the number of received data on the selected Endpoint */
DataLength = GetEPRxCount(bEpAddr & 0x7F);
/* Use the memory interface function to write to the selected endpoint */
PMAToUserBufferCopy(pBufferPointer, GetEPRxAddr(bEpAddr & 0x7F), DataLength);
/* Return the number of received data */
return DataLength;
}
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
******************************************************************************
* @file usb_sil.c
* @author MCD Application Team
* @version V4.0.0
* @date 28-August-2012
* @brief Simplified Interface Layer for Global Initialization and Endpoint
* Rea/Write operations.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usb_lib.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Extern variables ----------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name : USB_SIL_Init
* Description : Initialize the USB Device IP and the Endpoint 0.
* Input : None.
* Output : None.
* Return : Status.
*******************************************************************************/
uint32_t USB_SIL_Init(void)
{
/* USB interrupts initialization */
/* clear pending interrupts */
_SetISTR(0);
wInterrupt_Mask = IMR_MSK;
/* set interrupts mask */
_SetCNTR(wInterrupt_Mask);
return 0;
}
/*******************************************************************************
* Function Name : USB_SIL_Write
* Description : Write a buffer of data to a selected endpoint.
* Input : - bEpAddr: The address of the non control endpoint.
* - pBufferPointer: The pointer to the buffer of data to be written
* to the endpoint.
* - wBufferSize: Number of data to be written (in bytes).
* Output : None.
* Return : Status.
*******************************************************************************/
uint32_t USB_SIL_Write(uint8_t bEpAddr, uint8_t* pBufferPointer, uint32_t wBufferSize)
{
/* Use the memory interface function to write to the selected endpoint */
UserToPMABufferCopy(pBufferPointer, GetEPTxAddr(bEpAddr & 0x7F), wBufferSize);
/* Update the data length in the control register */
SetEPTxCount((bEpAddr & 0x7F), wBufferSize);
return 0;
}
/*******************************************************************************
* Function Name : USB_SIL_Read
* Description : Write a buffer of data to a selected endpoint.
* Input : - bEpAddr: The address of the non control endpoint.
* - pBufferPointer: The pointer to which will be saved the
* received data buffer.
* Output : None.
* Return : Number of received data (in Bytes).
*******************************************************************************/
uint32_t USB_SIL_Read(uint8_t bEpAddr, uint8_t* pBufferPointer)
{
uint32_t DataLength = 0;
/* Get the number of received data on the selected Endpoint */
DataLength = GetEPRxCount(bEpAddr & 0x7F);
/* Use the memory interface function to write to the selected endpoint */
PMAToUserBufferCopy(pBufferPointer, GetEPRxAddr(bEpAddr & 0x7F), DataLength);
/* Return the number of received data */
return DataLength;
}
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/