mirror of
https://github.com/betaflight/betaflight.git
synced 2025-07-17 21:35:44 +03:00
enable frequency analysis and automatic, dynamic changing of notch filter frequencies
change F3 from CM1 to CM4 add debug flags for FFT add bandpass filter add different filtering apply function add feature DYNAMIC_FILTER replace mode GTUNE with DYNAMIC FILTER move gyro frequency analysis into gyro loop instead of own task
This commit is contained in:
rav
parent
f55077673d
commit
d9909b91d3
39 changed files with 449 additions and 70 deletions
|
|
@ -0,0 +1,422 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file startup_stm32f302x8.s
|
||||
* @author MCD Application Team
|
||||
* @version V1.1.1
|
||||
* @date 28-March-2014
|
||||
* @brief stm32f30x vector table for Atollic TrueSTUDIO toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address,
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M4 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m4
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF1E0F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
ldr sp, =_estack /* Set stack pointer */
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
|
||||
LoopForever:
|
||||
b LoopForever
|
||||
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex-M4. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_STAMP_IRQHandler
|
||||
.word RTC_WKUP_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_TS_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word USB_HP_CAN1_TX_IRQHandler
|
||||
.word USB_LP_CAN1_RX0_IRQHandler
|
||||
.word CAN1_RX1_IRQHandler
|
||||
.word CAN1_SCE_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_TIM15_IRQHandler
|
||||
.word TIM1_UP_TIM16_IRQHandler
|
||||
.word TIM1_TRG_COM_TIM17_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word 0
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USBWakeUp_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SPI3_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word TIM6_DAC_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word COMP2_IRQHandler
|
||||
.word COMP4_6_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word I2C3_EV_IRQHandler
|
||||
.word I2C3_ER_IRQHandler
|
||||
.word USB_HP_IRQHandler
|
||||
.word USB_LP_IRQHandler
|
||||
.word USBWakeUp_RMP_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word FPU_IRQHandler
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_STAMP_IRQHandler
|
||||
.thumb_set TAMPER_STAMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_WKUP_IRQHandler
|
||||
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_TS_IRQHandler
|
||||
.thumb_set EXTI2_TS_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_CAN1_TX_IRQHandler
|
||||
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_CAN1_RX0_IRQHandler
|
||||
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_TIM15_IRQHandler
|
||||
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_TIM16_IRQHandler
|
||||
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_TIM17_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USBWakeUp_IRQHandler
|
||||
.thumb_set USBWakeUp_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_DAC_IRQHandler
|
||||
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP2_IRQHandler
|
||||
.thumb_set COMP2_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP4_6_IRQHandler
|
||||
.thumb_set COMP4_6_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_EV_IRQHandler
|
||||
.thumb_set I2C3_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C3_ER_IRQHandler
|
||||
.thumb_set I2C3_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_IRQHandler
|
||||
.thumb_set USB_HP_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_IRQHandler
|
||||
.thumb_set USB_LP_IRQHandler,Default_Handler
|
||||
|
||||
.weak USBWakeUp_RMP_IRQHandler
|
||||
.thumb_set USBWakeUp_RMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FPU_IRQHandler
|
||||
.thumb_set FPU_IRQHandler,Default_Handler
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -0,0 +1,469 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file startup_stm32f303xC.s
|
||||
* @author MCD Application Team
|
||||
* @version V1.1.1
|
||||
* @date 28-March-2014
|
||||
* @brief stm32f30x vector table for Atollic TrueSTUDIO toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address,
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M4 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m4
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
ldr sp, =_estack /* Set stack pointer */
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
|
||||
LoopForever:
|
||||
b LoopForever
|
||||
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex-M4. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_STAMP_IRQHandler
|
||||
.word RTC_WKUP_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_TS_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_2_IRQHandler
|
||||
.word USB_HP_CAN1_TX_IRQHandler
|
||||
.word USB_LP_CAN1_RX0_IRQHandler
|
||||
.word CAN1_RX1_IRQHandler
|
||||
.word CAN1_SCE_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_TIM15_IRQHandler
|
||||
.word TIM1_UP_TIM16_IRQHandler
|
||||
.word TIM1_TRG_COM_TIM17_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USBWakeUp_IRQHandler
|
||||
.word TIM8_BRK_IRQHandler
|
||||
.word TIM8_UP_IRQHandler
|
||||
.word TIM8_TRG_COM_IRQHandler
|
||||
.word TIM8_CC_IRQHandler
|
||||
.word ADC3_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SPI3_IRQHandler
|
||||
.word UART4_IRQHandler
|
||||
.word UART5_IRQHandler
|
||||
.word TIM6_DAC_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_IRQHandler
|
||||
.word DMA2_Channel5_IRQHandler
|
||||
.word ADC4_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word COMP1_2_3_IRQHandler
|
||||
.word COMP4_5_6_IRQHandler
|
||||
.word COMP7_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word USB_HP_IRQHandler
|
||||
.word USB_LP_IRQHandler
|
||||
.word USBWakeUp_RMP_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word FPU_IRQHandler
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_STAMP_IRQHandler
|
||||
.thumb_set TAMPER_STAMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_WKUP_IRQHandler
|
||||
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_TS_IRQHandler
|
||||
.thumb_set EXTI2_TS_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_2_IRQHandler
|
||||
.thumb_set ADC1_2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_CAN1_TX_IRQHandler
|
||||
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_CAN1_RX0_IRQHandler
|
||||
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_TIM15_IRQHandler
|
||||
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_TIM16_IRQHandler
|
||||
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_TIM17_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USBWakeUp_IRQHandler
|
||||
.thumb_set USBWakeUp_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_BRK_IRQHandler
|
||||
.thumb_set TIM8_BRK_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_UP_IRQHandler
|
||||
.thumb_set TIM8_UP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_TRG_COM_IRQHandler
|
||||
.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_CC_IRQHandler
|
||||
.thumb_set TIM8_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC3_IRQHandler
|
||||
.thumb_set ADC3_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_DAC_IRQHandler
|
||||
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_IRQHandler
|
||||
.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel5_IRQHandler
|
||||
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC4_IRQHandler
|
||||
.thumb_set ADC4_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP1_2_3_IRQHandler
|
||||
.thumb_set COMP1_2_3_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP4_5_6_IRQHandler
|
||||
.thumb_set COMP4_5_6_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP7_IRQHandler
|
||||
.thumb_set COMP7_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_IRQHandler
|
||||
.thumb_set USB_HP_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_IRQHandler
|
||||
.thumb_set USB_LP_IRQHandler,Default_Handler
|
||||
|
||||
.weak USBWakeUp_RMP_IRQHandler
|
||||
.thumb_set USBWakeUp_RMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FPU_IRQHandler
|
||||
.thumb_set FPU_IRQHandler,Default_Handler
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -0,0 +1,469 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file startup_stm32f30x.s
|
||||
* @author MCD Application Team
|
||||
* @version V1.1.1
|
||||
* @date 28-March-2014
|
||||
* @brief stm32f30x vector table for Atollic TrueSTUDIO toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address,
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M4 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m4
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
ldr sp, =_estack /* Set stack pointer */
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
|
||||
LoopForever:
|
||||
b LoopForever
|
||||
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex-M4. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_STAMP_IRQHandler
|
||||
.word RTC_WKUP_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_TS_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_2_IRQHandler
|
||||
.word USB_HP_CAN1_TX_IRQHandler
|
||||
.word USB_LP_CAN1_RX0_IRQHandler
|
||||
.word CAN1_RX1_IRQHandler
|
||||
.word CAN1_SCE_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_TIM15_IRQHandler
|
||||
.word TIM1_UP_TIM16_IRQHandler
|
||||
.word TIM1_TRG_COM_TIM17_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USBWakeUp_IRQHandler
|
||||
.word TIM8_BRK_IRQHandler
|
||||
.word TIM8_UP_IRQHandler
|
||||
.word TIM8_TRG_COM_IRQHandler
|
||||
.word TIM8_CC_IRQHandler
|
||||
.word ADC3_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SPI3_IRQHandler
|
||||
.word UART4_IRQHandler
|
||||
.word UART5_IRQHandler
|
||||
.word TIM6_DAC_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_IRQHandler
|
||||
.word DMA2_Channel5_IRQHandler
|
||||
.word ADC4_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word COMP1_2_3_IRQHandler
|
||||
.word COMP4_5_6_IRQHandler
|
||||
.word COMP7_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word USB_HP_IRQHandler
|
||||
.word USB_LP_IRQHandler
|
||||
.word USBWakeUp_RMP_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word FPU_IRQHandler
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_STAMP_IRQHandler
|
||||
.thumb_set TAMPER_STAMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_WKUP_IRQHandler
|
||||
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_TS_IRQHandler
|
||||
.thumb_set EXTI2_TS_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_2_IRQHandler
|
||||
.thumb_set ADC1_2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_CAN1_TX_IRQHandler
|
||||
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_CAN1_RX0_IRQHandler
|
||||
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_TIM15_IRQHandler
|
||||
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_TIM16_IRQHandler
|
||||
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_TIM17_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USBWakeUp_IRQHandler
|
||||
.thumb_set USBWakeUp_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_BRK_IRQHandler
|
||||
.thumb_set TIM8_BRK_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_UP_IRQHandler
|
||||
.thumb_set TIM8_UP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_TRG_COM_IRQHandler
|
||||
.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_CC_IRQHandler
|
||||
.thumb_set TIM8_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC3_IRQHandler
|
||||
.thumb_set ADC3_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_DAC_IRQHandler
|
||||
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_IRQHandler
|
||||
.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel5_IRQHandler
|
||||
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC4_IRQHandler
|
||||
.thumb_set ADC4_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP1_2_3_IRQHandler
|
||||
.thumb_set COMP1_2_3_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP4_5_6_IRQHandler
|
||||
.thumb_set COMP4_5_6_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP7_IRQHandler
|
||||
.thumb_set COMP7_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_IRQHandler
|
||||
.thumb_set USB_HP_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_IRQHandler
|
||||
.thumb_set USB_LP_IRQHandler,Default_Handler
|
||||
|
||||
.weak USBWakeUp_RMP_IRQHandler
|
||||
.thumb_set USBWakeUp_RMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FPU_IRQHandler
|
||||
.thumb_set FPU_IRQHandler,Default_Handler
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -0,0 +1,420 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file startup_stm32f334x8.s
|
||||
* @author MCD Application Team
|
||||
* @version V1.1.1
|
||||
* @date 28-March-2014
|
||||
* @brief stm32f30x vector table for Atollic TrueSTUDIO toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address,
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M4 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m4
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
ldr sp, =_estack /* Set stack pointer */
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
|
||||
LoopForever:
|
||||
b LoopForever
|
||||
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex-M4. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_STAMP_IRQHandler
|
||||
.word RTC_WKUP_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_TS_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_2_IRQHandler
|
||||
.word CAN1_TX_IRQHandler
|
||||
.word CAN1_RX0_IRQHandler
|
||||
.word CAN1_RX1_IRQHandler
|
||||
.word CAN1_SCE_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_TIM15_IRQHandler
|
||||
.word TIM1_UP_TIM16_IRQHandler
|
||||
.word TIM1_TRG_COM_TIM17_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word 0
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word SPI1_IRQHandler
|
||||
.word 0
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word TIM6_DAC1_IRQHandler
|
||||
.word TIM7_DAC2_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word COMP2_IRQHandler
|
||||
.word COMP4_6_IRQHandler
|
||||
.word 0
|
||||
.word HRTIM1_Master_IRQHandler
|
||||
.word HRTIM1_TIMA_IRQHandler
|
||||
.word HRTIM1_TIMB_IRQHandler
|
||||
.word HRTIM1_TIMC_IRQHandler
|
||||
.word HRTIM1_TIMD_IRQHandler
|
||||
.word HRTIM1_TIME_IRQHandler
|
||||
.word HRTIM1_FLT_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word FPU_IRQHandler
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_STAMP_IRQHandler
|
||||
.thumb_set TAMPER_STAMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_WKUP_IRQHandler
|
||||
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_TS_IRQHandler
|
||||
.thumb_set EXTI2_TS_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_2_IRQHandler
|
||||
.thumb_set ADC1_2_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_TX_IRQHandler
|
||||
.thumb_set CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX0_IRQHandler
|
||||
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_TIM15_IRQHandler
|
||||
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_TIM16_IRQHandler
|
||||
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_TIM17_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_DAC1_IRQHandler
|
||||
.thumb_set TIM6_DAC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_DAC2_IRQHandler
|
||||
.thumb_set TIM7_DAC2_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP2_IRQHandler
|
||||
.thumb_set COMP2_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP4_6_IRQHandler
|
||||
.thumb_set COMP4_6_IRQHandler,Default_Handler
|
||||
|
||||
.weak HRTIM1_Master_IRQHandler
|
||||
.thumb_set HRTIM1_Master_IRQHandler,Default_Handler
|
||||
|
||||
.weak HRTIM1_TIMA_IRQHandler
|
||||
.thumb_set HRTIM1_TIMA_IRQHandler,Default_Handler
|
||||
|
||||
.weak HRTIM1_TIMB_IRQHandler
|
||||
.thumb_set HRTIM1_TIMB_IRQHandler,Default_Handler
|
||||
|
||||
.weak HRTIM1_TIMC_IRQHandler
|
||||
.thumb_set HRTIM1_TIMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak HRTIM1_TIMD_IRQHandler
|
||||
.thumb_set HRTIM1_TIMD_IRQHandler,Default_Handler
|
||||
|
||||
.weak HRTIM1_TIME_IRQHandler
|
||||
.thumb_set HRTIM1_TIME_IRQHandler,Default_Handler
|
||||
|
||||
.weak HRTIM1_FLT_IRQHandler
|
||||
.thumb_set HRTIM1_FLT_IRQHandler,Default_Handler
|
||||
|
||||
.weak FPU_IRQHandler
|
||||
.thumb_set FPU_IRQHandler,Default_Handler
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -0,0 +1,367 @@
|
|||
;******************** (C) COPYRIGHT 2014 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f302x8.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V1.1.1
|
||||
;* Date : 28-March-2014
|
||||
;* Description : STM32F302x8 devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the CortexM4 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;*******************************************************************************
|
||||
;
|
||||
; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
; You may not use this file except in compliance with the License.
|
||||
; You may obtain a copy of the License at:
|
||||
;
|
||||
; http://www.st.com/software_license_agreement_liberty_v2
|
||||
;
|
||||
; Unless required by applicable law or agreed to in writing, software
|
||||
; distributed under the License is distributed on an "AS IS" BASIS,
|
||||
; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
; See the License for the specific language governing permissions and
|
||||
; limitations under the License.
|
||||
;
|
||||
;*******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detection
|
||||
DCD TAMPER_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_TS_IRQHandler ; EXTI Line2 and Touch
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD USB_HP_CAN1_TX_IRQHandler ; USB Device High Priority or CAN1 TX
|
||||
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Device Low Priority or CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
|
||||
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
|
||||
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD 0 ; Reserved
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]s
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup through EXTI line
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD COMP2_IRQHandler ; COMP2
|
||||
DCD COMP4_6_IRQHandler ; COMP4 and COMP6
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD I2C3_EV_IRQHandler ; I2C3 Event
|
||||
DCD I2C3_ER_IRQHandler ; I2C3 Error
|
||||
DCD USB_HP_IRQHandler ; USB High Priority remap
|
||||
DCD USB_LP_IRQHandler ; USB Low Priority remap
|
||||
DCD USBWakeUp_RMP_IRQHandler ; USB Wakeup remap through EXTI
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD FPU_IRQHandler ; FPU
|
||||
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT SystemInit
|
||||
IMPORT __main
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_STAMP_IRQHandler [WEAK]
|
||||
EXPORT RTC_WKUP_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_TS_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_IRQHandler [WEAK]
|
||||
EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT USBWakeUp_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT TIM6_DAC_IRQHandler [WEAK]
|
||||
EXPORT COMP2_IRQHandler [WEAK]
|
||||
EXPORT COMP4_6_IRQHandler [WEAK]
|
||||
EXPORT I2C3_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C3_ER_IRQHandler [WEAK]
|
||||
EXPORT USB_HP_IRQHandler [WEAK]
|
||||
EXPORT USB_LP_IRQHandler [WEAK]
|
||||
EXPORT USBWakeUp_RMP_IRQHandler [WEAK]
|
||||
EXPORT FPU_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_STAMP_IRQHandler
|
||||
RTC_WKUP_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_TS_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_IRQHandler
|
||||
USB_HP_CAN1_TX_IRQHandler
|
||||
USB_LP_CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM15_IRQHandler
|
||||
TIM1_UP_TIM16_IRQHandler
|
||||
TIM1_TRG_COM_TIM17_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
USBWakeUp_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
TIM6_DAC_IRQHandler
|
||||
COMP2_IRQHandler
|
||||
COMP4_6_IRQHandler
|
||||
I2C3_EV_IRQHandler
|
||||
I2C3_ER_IRQHandler
|
||||
USB_HP_IRQHandler
|
||||
USB_LP_IRQHandler
|
||||
USBWakeUp_RMP_IRQHandler
|
||||
FPU_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
||||
|
|
@ -0,0 +1,399 @@
|
|||
;******************** (C) COPYRIGHT 2014 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f303xc.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V1.1.1
|
||||
;* Date : 28-March-2014
|
||||
;* Description : STM32F303xC devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the CortexM4 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;*******************************************************************************
|
||||
;
|
||||
; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
; You may not use this file except in compliance with the License.
|
||||
; You may obtain a copy of the License at:
|
||||
;
|
||||
; http://www.st.com/software_license_agreement_liberty_v2
|
||||
;
|
||||
; Unless required by applicable law or agreed to in writing, software
|
||||
; distributed under the License is distributed on an "AS IS" BASIS,
|
||||
; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
; See the License for the specific language governing permissions and
|
||||
; limitations under the License.
|
||||
;
|
||||
;*******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detection
|
||||
DCD TAMPER_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_TS_IRQHandler ; EXTI Line2 and Touch
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1 and ADC2
|
||||
DCD USB_HP_CAN1_TX_IRQHandler ; USB Device High Priority or CAN1 TX
|
||||
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Device Low Priority or CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
|
||||
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
|
||||
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]s
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup through EXTI line
|
||||
DCD TIM8_BRK_IRQHandler ; TIM8 Break
|
||||
DCD TIM8_UP_IRQHandler ; TIM8 Update
|
||||
DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD ADC3_IRQHandler ; ADC3
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
|
||||
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
|
||||
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
|
||||
DCD ADC4_IRQHandler ; ADC4
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD COMP1_2_3_IRQHandler ; COMP1, COMP2 and COMP3
|
||||
DCD COMP4_5_6_IRQHandler ; COMP4, COMP5 and COMP6
|
||||
DCD COMP7_IRQHandler ; COMP7
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD USB_HP_IRQHandler ; USB High Priority remap
|
||||
DCD USB_LP_IRQHandler ; USB Low Priority remap
|
||||
DCD USBWakeUp_RMP_IRQHandler ; USB Wakeup remap through EXTI
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD FPU_IRQHandler ; FPU
|
||||
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT SystemInit
|
||||
IMPORT __main
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_STAMP_IRQHandler [WEAK]
|
||||
EXPORT RTC_WKUP_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_TS_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_2_IRQHandler [WEAK]
|
||||
EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT USBWakeUp_IRQHandler [WEAK]
|
||||
EXPORT TIM8_BRK_IRQHandler [WEAK]
|
||||
EXPORT TIM8_UP_IRQHandler [WEAK]
|
||||
EXPORT TIM8_TRG_COM_IRQHandler [WEAK]
|
||||
EXPORT TIM8_CC_IRQHandler [WEAK]
|
||||
EXPORT ADC3_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT TIM6_DAC_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel5_IRQHandler [WEAK]
|
||||
EXPORT ADC4_IRQHandler [WEAK]
|
||||
EXPORT COMP1_2_3_IRQHandler [WEAK]
|
||||
EXPORT COMP4_5_6_IRQHandler [WEAK]
|
||||
EXPORT COMP7_IRQHandler [WEAK]
|
||||
EXPORT USB_HP_IRQHandler [WEAK]
|
||||
EXPORT USB_LP_IRQHandler [WEAK]
|
||||
EXPORT USBWakeUp_RMP_IRQHandler [WEAK]
|
||||
EXPORT FPU_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_STAMP_IRQHandler
|
||||
RTC_WKUP_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_TS_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_2_IRQHandler
|
||||
USB_HP_CAN1_TX_IRQHandler
|
||||
USB_LP_CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM15_IRQHandler
|
||||
TIM1_UP_TIM16_IRQHandler
|
||||
TIM1_TRG_COM_TIM17_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
USBWakeUp_IRQHandler
|
||||
TIM8_BRK_IRQHandler
|
||||
TIM8_UP_IRQHandler
|
||||
TIM8_TRG_COM_IRQHandler
|
||||
TIM8_CC_IRQHandler
|
||||
ADC3_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
TIM6_DAC_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Channel1_IRQHandler
|
||||
DMA2_Channel2_IRQHandler
|
||||
DMA2_Channel3_IRQHandler
|
||||
DMA2_Channel4_IRQHandler
|
||||
DMA2_Channel5_IRQHandler
|
||||
ADC4_IRQHandler
|
||||
COMP1_2_3_IRQHandler
|
||||
COMP4_5_6_IRQHandler
|
||||
COMP7_IRQHandler
|
||||
USB_HP_IRQHandler
|
||||
USB_LP_IRQHandler
|
||||
USBWakeUp_RMP_IRQHandler
|
||||
FPU_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
||||
|
|
@ -0,0 +1,399 @@
|
|||
;******************** (C) COPYRIGHT 2014 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f30x.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V1.1.1
|
||||
;* Date : 28-March-2014
|
||||
;* Description : STM32F30x devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the CortexM4 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;*******************************************************************************
|
||||
;
|
||||
; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
; You may not use this file except in compliance with the License.
|
||||
; You may obtain a copy of the License at:
|
||||
;
|
||||
; http://www.st.com/software_license_agreement_liberty_v2
|
||||
;
|
||||
; Unless required by applicable law or agreed to in writing, software
|
||||
; distributed under the License is distributed on an "AS IS" BASIS,
|
||||
; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
; See the License for the specific language governing permissions and
|
||||
; limitations under the License.
|
||||
;
|
||||
;*******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detection
|
||||
DCD TAMPER_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_TS_IRQHandler ; EXTI Line2 and Touch
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1 and ADC2
|
||||
DCD USB_HP_CAN1_TX_IRQHandler ; USB Device High Priority or CAN1 TX
|
||||
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Device Low Priority or CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
|
||||
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
|
||||
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]s
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup through EXTI line
|
||||
DCD TIM8_BRK_IRQHandler ; TIM8 Break
|
||||
DCD TIM8_UP_IRQHandler ; TIM8 Update
|
||||
DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD ADC3_IRQHandler ; ADC3
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
|
||||
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
|
||||
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
|
||||
DCD ADC4_IRQHandler ; ADC4
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD COMP1_2_3_IRQHandler ; COMP1, COMP2 and COMP3
|
||||
DCD COMP4_5_6_IRQHandler ; COMP4, COMP5 and COMP6
|
||||
DCD COMP7_IRQHandler ; COMP7
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD USB_HP_IRQHandler ; USB High Priority remap
|
||||
DCD USB_LP_IRQHandler ; USB Low Priority remap
|
||||
DCD USBWakeUp_RMP_IRQHandler ; USB Wakeup remap through EXTI
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD FPU_IRQHandler ; FPU
|
||||
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT SystemInit
|
||||
IMPORT __main
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_STAMP_IRQHandler [WEAK]
|
||||
EXPORT RTC_WKUP_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_TS_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_2_IRQHandler [WEAK]
|
||||
EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT USBWakeUp_IRQHandler [WEAK]
|
||||
EXPORT TIM8_BRK_IRQHandler [WEAK]
|
||||
EXPORT TIM8_UP_IRQHandler [WEAK]
|
||||
EXPORT TIM8_TRG_COM_IRQHandler [WEAK]
|
||||
EXPORT TIM8_CC_IRQHandler [WEAK]
|
||||
EXPORT ADC3_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT TIM6_DAC_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel5_IRQHandler [WEAK]
|
||||
EXPORT ADC4_IRQHandler [WEAK]
|
||||
EXPORT COMP1_2_3_IRQHandler [WEAK]
|
||||
EXPORT COMP4_5_6_IRQHandler [WEAK]
|
||||
EXPORT COMP7_IRQHandler [WEAK]
|
||||
EXPORT USB_HP_IRQHandler [WEAK]
|
||||
EXPORT USB_LP_IRQHandler [WEAK]
|
||||
EXPORT USBWakeUp_RMP_IRQHandler [WEAK]
|
||||
EXPORT FPU_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_STAMP_IRQHandler
|
||||
RTC_WKUP_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_TS_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_2_IRQHandler
|
||||
USB_HP_CAN1_TX_IRQHandler
|
||||
USB_LP_CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM15_IRQHandler
|
||||
TIM1_UP_TIM16_IRQHandler
|
||||
TIM1_TRG_COM_TIM17_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
USBWakeUp_IRQHandler
|
||||
TIM8_BRK_IRQHandler
|
||||
TIM8_UP_IRQHandler
|
||||
TIM8_TRG_COM_IRQHandler
|
||||
TIM8_CC_IRQHandler
|
||||
ADC3_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
TIM6_DAC_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Channel1_IRQHandler
|
||||
DMA2_Channel2_IRQHandler
|
||||
DMA2_Channel3_IRQHandler
|
||||
DMA2_Channel4_IRQHandler
|
||||
DMA2_Channel5_IRQHandler
|
||||
ADC4_IRQHandler
|
||||
COMP1_2_3_IRQHandler
|
||||
COMP4_5_6_IRQHandler
|
||||
COMP7_IRQHandler
|
||||
USB_HP_IRQHandler
|
||||
USB_LP_IRQHandler
|
||||
USBWakeUp_RMP_IRQHandler
|
||||
FPU_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
||||
|
|
@ -0,0 +1,368 @@
|
|||
;******************** (C) COPYRIGHT 2014 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f334x8.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V1.1.1
|
||||
;* Date : 28-March-2014
|
||||
;* Description : STM32F334 devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the CortexM4 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;* <<< Use Configuration Wizard in Context Menu >>>
|
||||
;*******************************************************************************
|
||||
;
|
||||
; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
; You may not use this file except in compliance with the License.
|
||||
; You may obtain a copy of the License at:
|
||||
;
|
||||
; http://www.st.com/software_license_agreement_liberty_v2
|
||||
;
|
||||
; Unless required by applicable law or agreed to in writing, software
|
||||
; distributed under the License is distributed on an "AS IS" BASIS,
|
||||
; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
; See the License for the specific language governing permissions and
|
||||
; limitations under the License.
|
||||
;
|
||||
;*******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detection
|
||||
DCD TAMPER_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_TS_IRQHandler ; EXTI Line2 and Touch Sense
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1 and ADC2
|
||||
DCD CAN1_TX_IRQHandler ; CAN1 TX
|
||||
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
|
||||
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
|
||||
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD 0 ; Reserved
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event and EXTI Line 23
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD 0 ; Reserved
|
||||
DCD USART1_IRQHandler ; USART1 and EXTI Line 25
|
||||
DCD USART2_IRQHandler ; USART2 and EXTI Line 26
|
||||
DCD USART3_IRQHandler ; USART3 and EXTI Line 28
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]s
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM6_DAC1_IRQHandler ; TIM6 and DAC1 underrun errors
|
||||
DCD TIM7_DAC2_IRQHandler ; TIM7 and DAC2 underrun errors
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD COMP2_IRQHandler ; COMP2
|
||||
DCD COMP4_6_IRQHandler ; COMP4, COMP6
|
||||
DCD 0 ; Reserved
|
||||
DCD HRTIM1_Master_IRQHandler ; HRTIM1 master timer
|
||||
DCD HRTIM1_TIMA_IRQHandler ; Reserved
|
||||
DCD HRTIM1_TIMB_IRQHandler ; Reserved
|
||||
DCD HRTIM1_TIMC_IRQHandler ; Reserved
|
||||
DCD HRTIM1_TIMD_IRQHandler ; Reserved
|
||||
DCD HRTIM1_TIME_IRQHandler ; Reserved
|
||||
DCD HRTIM1_FLT_IRQHandler ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD FPU_IRQHandler ; FPU
|
||||
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT SystemInit
|
||||
IMPORT __main
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_STAMP_IRQHandler [WEAK]
|
||||
EXPORT RTC_WKUP_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_TS_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_2_IRQHandler [WEAK]
|
||||
EXPORT CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT TIM6_DAC1_IRQHandler [WEAK]
|
||||
EXPORT TIM7_DAC2_IRQHandler [WEAK]
|
||||
EXPORT COMP2_IRQHandler [WEAK]
|
||||
EXPORT COMP4_6_IRQHandler [WEAK]
|
||||
EXPORT HRTIM1_Master_IRQHandler [WEAK]
|
||||
EXPORT HRTIM1_TIMA_IRQHandler [WEAK]
|
||||
EXPORT HRTIM1_TIMB_IRQHandler [WEAK]
|
||||
EXPORT HRTIM1_TIMC_IRQHandler [WEAK]
|
||||
EXPORT HRTIM1_TIMD_IRQHandler [WEAK]
|
||||
EXPORT HRTIM1_TIME_IRQHandler [WEAK]
|
||||
EXPORT HRTIM1_FLT_IRQHandler [WEAK]
|
||||
EXPORT FPU_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_STAMP_IRQHandler
|
||||
RTC_WKUP_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_TS_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_2_IRQHandler
|
||||
CAN1_TX_IRQHandler
|
||||
CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM15_IRQHandler
|
||||
TIM1_UP_TIM16_IRQHandler
|
||||
TIM1_TRG_COM_TIM17_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
TIM6_DAC1_IRQHandler
|
||||
TIM7_DAC2_IRQHandler
|
||||
COMP2_IRQHandler
|
||||
COMP4_6_IRQHandler
|
||||
HRTIM1_Master_IRQHandler
|
||||
HRTIM1_TIMA_IRQHandler
|
||||
HRTIM1_TIMB_IRQHandler
|
||||
HRTIM1_TIMC_IRQHandler
|
||||
HRTIM1_TIMD_IRQHandler
|
||||
HRTIM1_TIME_IRQHandler
|
||||
HRTIM1_FLT_IRQHandler
|
||||
FPU_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
||||
|
|
@ -0,0 +1,465 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file startup_stm32f30x.s
|
||||
* @author MCD Application Team
|
||||
* @version V1.1.1
|
||||
* @date 28-March-2014
|
||||
* @brief STM32F30x Devices vector table for RIDE7 toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system and the external SRAM mounted on
|
||||
* STM3230C-EVAL board to be used as data memory (optional,
|
||||
* to be enabled by user)
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M4 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m4
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
movs r1, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r3, =_sidata
|
||||
ldr r3, [r3, r1]
|
||||
str r3, [r0, r1]
|
||||
adds r1, r1, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
ldr r0, =_sdata
|
||||
ldr r3, =_edata
|
||||
adds r2, r0, r1
|
||||
cmp r2, r3
|
||||
bcc CopyDataInit
|
||||
ldr r2, =_sbss
|
||||
b LoopFillZerobss
|
||||
/* Zero fill the bss segment. */
|
||||
FillZerobss:
|
||||
movs r3, #0
|
||||
str r3, [r2], #4
|
||||
|
||||
LoopFillZerobss:
|
||||
ldr r3, = _ebss
|
||||
cmp r2, r3
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call the clock system intitialization function.*/
|
||||
bl SystemInit
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M4. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_STAMP_IRQHandler
|
||||
.word RTC_WKUP_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_TS_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_2_IRQHandler
|
||||
.word USB_HP_CAN1_TX_IRQHandler
|
||||
.word USB_LP_CAN1_RX0_IRQHandler
|
||||
.word CAN1_RX1_IRQHandler
|
||||
.word CAN1_SCE_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_TIM15_IRQHandler
|
||||
.word TIM1_UP_TIM16_IRQHandler
|
||||
.word TIM1_TRG_COM_TIM17_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USBWakeUp_IRQHandler
|
||||
.word TIM8_BRK_IRQHandler
|
||||
.word TIM8_UP_IRQHandler
|
||||
.word TIM8_TRG_COM_IRQHandler
|
||||
.word TIM8_CC_IRQHandler
|
||||
.word ADC3_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SPI3_IRQHandler
|
||||
.word UART4_IRQHandler
|
||||
.word UART5_IRQHandler
|
||||
.word TIM6_DAC_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_IRQHandler
|
||||
.word DMA2_Channel5_IRQHandler
|
||||
.word ADC4_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word COMP1_2_3_IRQHandler
|
||||
.word COMP4_5_6_IRQHandler
|
||||
.word COMP7_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word USB_HP_IRQHandler
|
||||
.word USB_LP_IRQHandler
|
||||
.word USBWakeUp_RMP_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word FPU_IRQHandler
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_STAMP_IRQHandler
|
||||
.thumb_set TAMPER_STAMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_WKUP_IRQHandler
|
||||
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_TS_IRQHandler
|
||||
.thumb_set EXTI2_TS_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_2_IRQHandler
|
||||
.thumb_set ADC1_2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_CAN1_TX_IRQHandler
|
||||
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_CAN1_RX0_IRQHandler
|
||||
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_TIM15_IRQHandler
|
||||
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_TIM16_IRQHandler
|
||||
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_TIM17_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USBWakeUp_IRQHandler
|
||||
.thumb_set USBWakeUp_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_BRK_IRQHandler
|
||||
.thumb_set TIM8_BRK_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_UP_IRQHandler
|
||||
.thumb_set TIM8_UP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_TRG_COM_IRQHandler
|
||||
.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_CC_IRQHandler
|
||||
.thumb_set TIM8_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC3_IRQHandler
|
||||
.thumb_set ADC3_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_DAC_IRQHandler
|
||||
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_IRQHandler
|
||||
.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel5_IRQHandler
|
||||
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC4_IRQHandler
|
||||
.thumb_set ADC4_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP1_2_3_IRQHandler
|
||||
.thumb_set COMP1_2_3_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP4_5_6_IRQHandler
|
||||
.thumb_set COMP4_5_6_IRQHandler,Default_Handler
|
||||
|
||||
.weak COMP7_IRQHandler
|
||||
.thumb_set COMP7_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_IRQHandler
|
||||
.thumb_set USB_HP_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_IRQHandler
|
||||
.thumb_set USB_LP_IRQHandler,Default_Handler
|
||||
|
||||
.weak USBWakeUp_RMP_IRQHandler
|
||||
.thumb_set USBWakeUp_RMP_IRQHandler,Default_Handler
|
||||
|
||||
.weak FPU_IRQHandler
|
||||
.thumb_set FPU_IRQHandler,Default_Handler
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -0,0 +1,473 @@
|
|||
;/******************** (C) COPYRIGHT 2014 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f302x8.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V1.1.1
|
||||
;* Date : 28-March-2014
|
||||
;* Description : STM32F302x8 devices vector table for EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == _iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* - Branches to main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M4 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
;* You may not use this file except in compliance with the License.
|
||||
;* You may obtain a copy of the License at:
|
||||
;*
|
||||
;* http://www.st.com/software_license_agreement_liberty_v2
|
||||
;*
|
||||
;* Unless required by applicable law or agreed to in writing, software
|
||||
;* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
;* See the License for the specific language governing permissions and
|
||||
;* limitations under the License.
|
||||
;*
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detection
|
||||
DCD TAMPER_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_TS_IRQHandler ; EXTI Line2 and Touch Sense
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD USB_HP_CAN1_TX_IRQHandler ; USB Device High Priority or CAN1 TX
|
||||
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Device Low Priority or CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
|
||||
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
|
||||
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD 0 ; Reserved
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]s
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup through EXTI line
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD COMP2_IRQHandler ; COMP2
|
||||
DCD COMP4_6_IRQHandler ; COMP4 and COMP6
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD I2C3_EV_IRQHandler ; I2C3 Event
|
||||
DCD I2C3_ER_IRQHandler ; I2C3 Error
|
||||
DCD USB_HP_IRQHandler ; USB High Priority remap
|
||||
DCD USB_LP_IRQHandler ; USB Low Priority remap
|
||||
DCD USBWakeUp_RMP_IRQHandler ; USB Wakeup remap through EXTI
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD FPU_IRQHandler ; FPU
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMPER_STAMP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMPER_STAMP_IRQHandler
|
||||
B TAMPER_STAMP_IRQHandler
|
||||
|
||||
PUBWEAK RTC_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_WKUP_IRQHandler
|
||||
B RTC_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_TS_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_TS_IRQHandler
|
||||
B EXTI2_TS_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel1_IRQHandler
|
||||
B DMA1_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel2_IRQHandler
|
||||
B DMA1_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel3_IRQHandler
|
||||
B DMA1_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel4_IRQHandler
|
||||
B DMA1_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel5_IRQHandler
|
||||
B DMA1_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel6_IRQHandler
|
||||
B DMA1_Channel6_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel7_IRQHandler
|
||||
B DMA1_Channel7_IRQHandler
|
||||
|
||||
PUBWEAK ADC1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC1_IRQHandler
|
||||
B ADC1_IRQHandler
|
||||
|
||||
PUBWEAK USB_HP_CAN1_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_HP_CAN1_TX_IRQHandler
|
||||
B USB_HP_CAN1_TX_IRQHandler
|
||||
|
||||
PUBWEAK USB_LP_CAN1_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_LP_CAN1_RX0_IRQHandler
|
||||
B USB_LP_CAN1_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX1_IRQHandler
|
||||
B CAN1_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_SCE_IRQHandler
|
||||
B CAN1_SCE_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_BRK_TIM15_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_BRK_TIM15_IRQHandler
|
||||
B TIM1_BRK_TIM15_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_UP_TIM16_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_UP_TIM16_IRQHandler
|
||||
B TIM1_UP_TIM16_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_TRG_COM_TIM17_IRQHandler
|
||||
B TIM1_TRG_COM_TIM17_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_CC_IRQHandler
|
||||
B TIM1_CC_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
PUBWEAK USBWakeUp_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USBWakeUp_IRQHandler
|
||||
B USBWakeUp_IRQHandler
|
||||
|
||||
PUBWEAK SPI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI3_IRQHandler
|
||||
B SPI3_IRQHandler
|
||||
|
||||
PUBWEAK TIM6_DAC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM6_DAC_IRQHandler
|
||||
B TIM6_DAC_IRQHandler
|
||||
|
||||
PUBWEAK COMP2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
COMP2_IRQHandler
|
||||
B COMP2_IRQHandler
|
||||
|
||||
PUBWEAK COMP4_6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
COMP4_6_IRQHandler
|
||||
B COMP4_6_IRQHandler
|
||||
|
||||
PUBWEAK I2C3_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C3_EV_IRQHandler
|
||||
B I2C3_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C3_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C3_ER_IRQHandler
|
||||
B I2C3_ER_IRQHandler
|
||||
|
||||
PUBWEAK USB_HP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_HP_IRQHandler
|
||||
B USB_HP_IRQHandler
|
||||
|
||||
PUBWEAK USB_LP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_LP_IRQHandler
|
||||
B USB_LP_IRQHandler
|
||||
|
||||
PUBWEAK USBWakeUp_RMP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USBWakeUp_RMP_IRQHandler
|
||||
B USBWakeUp_RMP_IRQHandler
|
||||
|
||||
PUBWEAK FPU_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FPU_IRQHandler
|
||||
B FPU_IRQHandler
|
||||
|
||||
END
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -0,0 +1,554 @@
|
|||
;/******************** (C) COPYRIGHT 2014 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f303xc.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V1.1.1
|
||||
;* Date : 28-March-2014
|
||||
;* Description : STM32F303xC devices vector table for EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == _iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* - Branches to main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M4 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
;* You may not use this file except in compliance with the License.
|
||||
;* You may obtain a copy of the License at:
|
||||
;*
|
||||
;* http://www.st.com/software_license_agreement_liberty_v2
|
||||
;*
|
||||
;* Unless required by applicable law or agreed to in writing, software
|
||||
;* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
;* See the License for the specific language governing permissions and
|
||||
;* limitations under the License.
|
||||
;*
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detection
|
||||
DCD TAMPER_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_TS_IRQHandler ; EXTI Line2 and Touch Sense
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1 and ADC2
|
||||
DCD USB_HP_CAN1_TX_IRQHandler ; USB Device High Priority or CAN1 TX
|
||||
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Device Low Priority or CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
|
||||
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
|
||||
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]s
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup through EXTI line
|
||||
DCD TIM8_BRK_IRQHandler ; TIM8 Break
|
||||
DCD TIM8_UP_IRQHandler ; TIM8 Update
|
||||
DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD ADC3_IRQHandler ; ADC3
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
|
||||
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
|
||||
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
|
||||
DCD ADC4_IRQHandler ; ADC4
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD COMP1_2_3_IRQHandler ; COMP1, COMP2 and COMP3
|
||||
DCD COMP4_5_6_IRQHandler ; COMP4, COMP5 and COMP6
|
||||
DCD COMP7_IRQHandler ; COMP7
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD USB_HP_IRQHandler ; USB High Priority remap
|
||||
DCD USB_LP_IRQHandler ; USB Low Priority remap
|
||||
DCD USBWakeUp_RMP_IRQHandler ; USB Wakeup remap through EXTI
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD FPU_IRQHandler ; FPU
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMPER_STAMP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMPER_STAMP_IRQHandler
|
||||
B TAMPER_STAMP_IRQHandler
|
||||
|
||||
PUBWEAK RTC_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_WKUP_IRQHandler
|
||||
B RTC_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_TS_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_TS_IRQHandler
|
||||
B EXTI2_TS_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel1_IRQHandler
|
||||
B DMA1_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel2_IRQHandler
|
||||
B DMA1_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel3_IRQHandler
|
||||
B DMA1_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel4_IRQHandler
|
||||
B DMA1_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel5_IRQHandler
|
||||
B DMA1_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel6_IRQHandler
|
||||
B DMA1_Channel6_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel7_IRQHandler
|
||||
B DMA1_Channel7_IRQHandler
|
||||
|
||||
PUBWEAK ADC1_2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC1_2_IRQHandler
|
||||
B ADC1_2_IRQHandler
|
||||
|
||||
PUBWEAK USB_HP_CAN1_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_HP_CAN1_TX_IRQHandler
|
||||
B USB_HP_CAN1_TX_IRQHandler
|
||||
|
||||
PUBWEAK USB_LP_CAN1_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_LP_CAN1_RX0_IRQHandler
|
||||
B USB_LP_CAN1_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX1_IRQHandler
|
||||
B CAN1_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_SCE_IRQHandler
|
||||
B CAN1_SCE_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_BRK_TIM15_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_BRK_TIM15_IRQHandler
|
||||
B TIM1_BRK_TIM15_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_UP_TIM16_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_UP_TIM16_IRQHandler
|
||||
B TIM1_UP_TIM16_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_TRG_COM_TIM17_IRQHandler
|
||||
B TIM1_TRG_COM_TIM17_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_CC_IRQHandler
|
||||
B TIM1_CC_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
PUBWEAK USBWakeUp_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USBWakeUp_IRQHandler
|
||||
B USBWakeUp_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_BRK_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_BRK_IRQHandler
|
||||
B TIM8_BRK_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_UP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_UP_IRQHandler
|
||||
B TIM8_UP_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_TRG_COM_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_TRG_COM_IRQHandler
|
||||
B TIM8_TRG_COM_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_CC_IRQHandler
|
||||
B TIM8_CC_IRQHandler
|
||||
|
||||
PUBWEAK ADC3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC3_IRQHandler
|
||||
B ADC3_IRQHandler
|
||||
|
||||
PUBWEAK SPI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI3_IRQHandler
|
||||
B SPI3_IRQHandler
|
||||
|
||||
PUBWEAK UART4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART4_IRQHandler
|
||||
B UART4_IRQHandler
|
||||
|
||||
PUBWEAK UART5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART5_IRQHandler
|
||||
B UART5_IRQHandler
|
||||
|
||||
PUBWEAK TIM6_DAC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM6_DAC_IRQHandler
|
||||
B TIM6_DAC_IRQHandler
|
||||
|
||||
PUBWEAK TIM7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM7_IRQHandler
|
||||
B TIM7_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel1_IRQHandler
|
||||
B DMA2_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel2_IRQHandler
|
||||
B DMA2_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel3_IRQHandler
|
||||
B DMA2_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel4_IRQHandler
|
||||
B DMA2_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel5_IRQHandler
|
||||
B DMA2_Channel5_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK ADC4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC4_IRQHandler
|
||||
B ADC4_IRQHandler
|
||||
|
||||
PUBWEAK COMP1_2_3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
COMP1_2_3_IRQHandler
|
||||
B COMP1_2_3_IRQHandler
|
||||
|
||||
PUBWEAK COMP4_5_6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
COMP4_5_6_IRQHandler
|
||||
B COMP4_5_6_IRQHandler
|
||||
|
||||
PUBWEAK COMP7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
COMP7_IRQHandler
|
||||
B COMP7_IRQHandler
|
||||
|
||||
PUBWEAK USB_HP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_HP_IRQHandler
|
||||
B USB_HP_IRQHandler
|
||||
|
||||
PUBWEAK USB_LP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_LP_IRQHandler
|
||||
B USB_LP_IRQHandler
|
||||
|
||||
PUBWEAK USBWakeUp_RMP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USBWakeUp_RMP_IRQHandler
|
||||
B USBWakeUp_RMP_IRQHandler
|
||||
|
||||
PUBWEAK FPU_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FPU_IRQHandler
|
||||
B FPU_IRQHandler
|
||||
|
||||
END
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -0,0 +1,554 @@
|
|||
;/******************** (C) COPYRIGHT 2014 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f30x.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V1.1.1
|
||||
;* Date : 28-March-2014
|
||||
;* Description : STM32F30x devices vector table for EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == _iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* - Branches to main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M4 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
;* You may not use this file except in compliance with the License.
|
||||
;* You may obtain a copy of the License at:
|
||||
;*
|
||||
;* http://www.st.com/software_license_agreement_liberty_v2
|
||||
;*
|
||||
;* Unless required by applicable law or agreed to in writing, software
|
||||
;* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
;* See the License for the specific language governing permissions and
|
||||
;* limitations under the License.
|
||||
;*
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detection
|
||||
DCD TAMPER_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_TS_IRQHandler ; EXTI Line2 and Touch Sense
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1 and ADC2
|
||||
DCD USB_HP_CAN1_TX_IRQHandler ; USB Device High Priority or CAN1 TX
|
||||
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Device Low Priority or CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
|
||||
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
|
||||
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]s
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup through EXTI line
|
||||
DCD TIM8_BRK_IRQHandler ; TIM8 Break
|
||||
DCD TIM8_UP_IRQHandler ; TIM8 Update
|
||||
DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD ADC3_IRQHandler ; ADC3
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3
|
||||
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4
|
||||
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5
|
||||
DCD ADC4_IRQHandler ; ADC4
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD COMP1_2_3_IRQHandler ; COMP1, COMP2 and COMP3
|
||||
DCD COMP4_5_6_IRQHandler ; COMP4, COMP5 and COMP6
|
||||
DCD COMP7_IRQHandler ; COMP7
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD USB_HP_IRQHandler ; USB High Priority remap
|
||||
DCD USB_LP_IRQHandler ; USB Low Priority remap
|
||||
DCD USBWakeUp_RMP_IRQHandler ; USB Wakeup remap through EXTI
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD FPU_IRQHandler ; FPU
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMPER_STAMP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMPER_STAMP_IRQHandler
|
||||
B TAMPER_STAMP_IRQHandler
|
||||
|
||||
PUBWEAK RTC_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_WKUP_IRQHandler
|
||||
B RTC_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_TS_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_TS_IRQHandler
|
||||
B EXTI2_TS_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel1_IRQHandler
|
||||
B DMA1_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel2_IRQHandler
|
||||
B DMA1_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel3_IRQHandler
|
||||
B DMA1_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel4_IRQHandler
|
||||
B DMA1_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel5_IRQHandler
|
||||
B DMA1_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel6_IRQHandler
|
||||
B DMA1_Channel6_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel7_IRQHandler
|
||||
B DMA1_Channel7_IRQHandler
|
||||
|
||||
PUBWEAK ADC1_2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC1_2_IRQHandler
|
||||
B ADC1_2_IRQHandler
|
||||
|
||||
PUBWEAK USB_HP_CAN1_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_HP_CAN1_TX_IRQHandler
|
||||
B USB_HP_CAN1_TX_IRQHandler
|
||||
|
||||
PUBWEAK USB_LP_CAN1_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_LP_CAN1_RX0_IRQHandler
|
||||
B USB_LP_CAN1_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX1_IRQHandler
|
||||
B CAN1_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_SCE_IRQHandler
|
||||
B CAN1_SCE_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_BRK_TIM15_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_BRK_TIM15_IRQHandler
|
||||
B TIM1_BRK_TIM15_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_UP_TIM16_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_UP_TIM16_IRQHandler
|
||||
B TIM1_UP_TIM16_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_TRG_COM_TIM17_IRQHandler
|
||||
B TIM1_TRG_COM_TIM17_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_CC_IRQHandler
|
||||
B TIM1_CC_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
PUBWEAK USBWakeUp_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USBWakeUp_IRQHandler
|
||||
B USBWakeUp_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_BRK_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_BRK_IRQHandler
|
||||
B TIM8_BRK_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_UP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_UP_IRQHandler
|
||||
B TIM8_UP_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_TRG_COM_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_TRG_COM_IRQHandler
|
||||
B TIM8_TRG_COM_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_CC_IRQHandler
|
||||
B TIM8_CC_IRQHandler
|
||||
|
||||
PUBWEAK ADC3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC3_IRQHandler
|
||||
B ADC3_IRQHandler
|
||||
|
||||
PUBWEAK SPI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI3_IRQHandler
|
||||
B SPI3_IRQHandler
|
||||
|
||||
PUBWEAK UART4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART4_IRQHandler
|
||||
B UART4_IRQHandler
|
||||
|
||||
PUBWEAK UART5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART5_IRQHandler
|
||||
B UART5_IRQHandler
|
||||
|
||||
PUBWEAK TIM6_DAC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM6_DAC_IRQHandler
|
||||
B TIM6_DAC_IRQHandler
|
||||
|
||||
PUBWEAK TIM7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM7_IRQHandler
|
||||
B TIM7_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel1_IRQHandler
|
||||
B DMA2_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel2_IRQHandler
|
||||
B DMA2_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel3_IRQHandler
|
||||
B DMA2_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel4_IRQHandler
|
||||
B DMA2_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel5_IRQHandler
|
||||
B DMA2_Channel5_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK ADC4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC4_IRQHandler
|
||||
B ADC4_IRQHandler
|
||||
|
||||
PUBWEAK COMP1_2_3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
COMP1_2_3_IRQHandler
|
||||
B COMP1_2_3_IRQHandler
|
||||
|
||||
PUBWEAK COMP4_5_6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
COMP4_5_6_IRQHandler
|
||||
B COMP4_5_6_IRQHandler
|
||||
|
||||
PUBWEAK COMP7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
COMP7_IRQHandler
|
||||
B COMP7_IRQHandler
|
||||
|
||||
PUBWEAK USB_HP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_HP_IRQHandler
|
||||
B USB_HP_IRQHandler
|
||||
|
||||
PUBWEAK USB_LP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_LP_IRQHandler
|
||||
B USB_LP_IRQHandler
|
||||
|
||||
PUBWEAK USBWakeUp_RMP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USBWakeUp_RMP_IRQHandler
|
||||
B USBWakeUp_RMP_IRQHandler
|
||||
|
||||
PUBWEAK FPU_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FPU_IRQHandler
|
||||
B FPU_IRQHandler
|
||||
|
||||
END
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -0,0 +1,474 @@
|
|||
;/******************** (C) COPYRIGHT 2014 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f334x8.s
|
||||
;* Author : MCD Application Team
|
||||
;* Version : V1.1.1
|
||||
;* Date : 28-March-2014
|
||||
;* Description : STM32F334x8 devices vector table for EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == _iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* - Branches to main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M4 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
;* You may not use this file except in compliance with the License.
|
||||
;* You may obtain a copy of the License at:
|
||||
;*
|
||||
;* http://www.st.com/software_license_agreement_liberty_v2
|
||||
;*
|
||||
;* Unless required by applicable law or agreed to in writing, software
|
||||
;* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
;* See the License for the specific language governing permissions and
|
||||
;* limitations under the License.
|
||||
;*
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window WatchDog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detection
|
||||
DCD TAMPER_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line
|
||||
DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line
|
||||
DCD FLASH_IRQHandler ; FLASH
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line1
|
||||
DCD EXTI2_TS_IRQHandler ; EXTI Line2 and Touch Sense
|
||||
DCD EXTI3_IRQHandler ; EXTI Line3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1 and ADC2
|
||||
DCD CAN1_TX_IRQHandler ; CAN1 TX
|
||||
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; External Line[9:5]s
|
||||
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
|
||||
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
|
||||
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD 0 ; Reserved
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event through EXTI Line 23
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD 0 ; Reserved
|
||||
DCD USART1_IRQHandler ; USART1 through EXTI Line 25
|
||||
DCD USART2_IRQHandler ; USART2 through EXTI Line 26
|
||||
DCD USART3_IRQHandler ; USART3 through EXTI Line 28
|
||||
DCD EXTI15_10_IRQHandler ; External Line[15:10]s
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM6_DAC1_IRQHandler ; TIM6 and DAC1 underrun errors
|
||||
DCD TIM7_DAC2_IRQHandler ; TIM7 and DAC2 underrun errors
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD COMP2_IRQHandler ; COMP2
|
||||
DCD COMP4_6_IRQHandler ; COMP4, COMP6
|
||||
DCD 0 ; Reserved
|
||||
DCD HRTIM1_Master_IRQHandler ; HRTIM1 master timer
|
||||
DCD HRTIM1_TIMA_IRQHandler ; HRTIM1 timer A
|
||||
DCD HRTIM1_TIMB_IRQHandler ; HRTIM1 timer B
|
||||
DCD HRTIM1_TIMC_IRQHandler ; HRTIM1 timer C
|
||||
DCD HRTIM1_TIMD_IRQHandler ; HRTIM1 timer D
|
||||
DCD HRTIM1_TIME_IRQHandler ; HRTIM1 timer E
|
||||
DCD HRTIM1_FLT_IRQHandler ; HRTIM1 fault
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD FPU_IRQHandler ; FPU
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMPER_STAMP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMPER_STAMP_IRQHandler
|
||||
B TAMPER_STAMP_IRQHandler
|
||||
|
||||
PUBWEAK RTC_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_WKUP_IRQHandler
|
||||
B RTC_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_TS_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_TS_IRQHandler
|
||||
B EXTI2_TS_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel1_IRQHandler
|
||||
B DMA1_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel2_IRQHandler
|
||||
B DMA1_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel3_IRQHandler
|
||||
B DMA1_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel4_IRQHandler
|
||||
B DMA1_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel5_IRQHandler
|
||||
B DMA1_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel6_IRQHandler
|
||||
B DMA1_Channel6_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel7_IRQHandler
|
||||
B DMA1_Channel7_IRQHandler
|
||||
|
||||
PUBWEAK ADC1_2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC1_2_IRQHandler
|
||||
B ADC1_2_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_TX_IRQHandler
|
||||
B CAN1_TX_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX0_IRQHandler
|
||||
B CAN1_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX1_IRQHandler
|
||||
B CAN1_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_SCE_IRQHandler
|
||||
B CAN1_SCE_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_BRK_TIM15_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_BRK_TIM15_IRQHandler
|
||||
B TIM1_BRK_TIM15_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_UP_TIM16_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_UP_TIM16_IRQHandler
|
||||
B TIM1_UP_TIM16_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_TRG_COM_TIM17_IRQHandler
|
||||
B TIM1_TRG_COM_TIM17_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_CC_IRQHandler
|
||||
B TIM1_CC_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
PUBWEAK TIM6_DAC1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM6_DAC1_IRQHandler
|
||||
B TIM6_DAC1_IRQHandler
|
||||
|
||||
PUBWEAK TIM7_DAC2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM7_DAC2_IRQHandler
|
||||
B TIM7_DAC2_IRQHandler
|
||||
|
||||
PUBWEAK COMP2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
|
||||
COMP2_IRQHandler
|
||||
B COMP2_IRQHandler
|
||||
|
||||
PUBWEAK COMP4_6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
COMP4_6_IRQHandler
|
||||
B COMP4_6_IRQHandler
|
||||
|
||||
PUBWEAK HRTIM1_Master_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HRTIM1_Master_IRQHandler
|
||||
B HRTIM1_Master_IRQHandler
|
||||
|
||||
PUBWEAK HRTIM1_TIMA_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HRTIM1_TIMA_IRQHandler
|
||||
B HRTIM1_TIMA_IRQHandler
|
||||
|
||||
PUBWEAK HRTIM1_TIMB_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HRTIM1_TIMB_IRQHandler
|
||||
B HRTIM1_TIMB_IRQHandler
|
||||
|
||||
PUBWEAK HRTIM1_TIMC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HRTIM1_TIMC_IRQHandler
|
||||
B HRTIM1_TIMC_IRQHandler
|
||||
|
||||
PUBWEAK HRTIM1_TIMD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HRTIM1_TIMD_IRQHandler
|
||||
B HRTIM1_TIMD_IRQHandler
|
||||
|
||||
PUBWEAK HRTIM1_TIME_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HRTIM1_TIME_IRQHandler
|
||||
B HRTIM1_TIME_IRQHandler
|
||||
|
||||
PUBWEAK HRTIM1_FLT_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HRTIM1_FLT_IRQHandler
|
||||
B HRTIM1_FLT_IRQHandler
|
||||
|
||||
PUBWEAK FPU_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FPU_IRQHandler
|
||||
B FPU_IRQHandler
|
||||
|
||||
END
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
7695
lib/main/CMSIS/CM4/DeviceSupport/ST/STM32F30x/stm32f30x.h
Normal file
7695
lib/main/CMSIS/CM4/DeviceSupport/ST/STM32F30x/stm32f30x.h
Normal file
File diff suppressed because it is too large
Load diff
|
|
@ -0,0 +1,82 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f30x_conf.h
|
||||
* @author MCD Application Team
|
||||
* @version V1.1.0
|
||||
* @date 20-September-2012
|
||||
* @brief Library configuration file.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F30X_CONF_H
|
||||
#define __STM32F30X_CONF_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/* Comment the line below to disable peripheral header file inclusion */
|
||||
#include "stm32f30x_adc.h"
|
||||
//#include "stm32f30x_can.h"
|
||||
//#include "stm32f30x_crc.h"
|
||||
#include "stm32f30x_comp.h"
|
||||
#include "stm32f30x_dac.h"
|
||||
#include "stm32f30x_dbgmcu.h"
|
||||
#include "stm32f30x_dma.h"
|
||||
#include "stm32f30x_exti.h"
|
||||
#include "stm32f30x_flash.h"
|
||||
#include "stm32f30x_gpio.h"
|
||||
#include "stm32f30x_syscfg.h"
|
||||
#include "stm32f30x_i2c.h"
|
||||
#include "stm32f30x_iwdg.h"
|
||||
#include "stm32f30x_opamp.h"
|
||||
#include "stm32f30x_pwr.h"
|
||||
#include "stm32f30x_rcc.h"
|
||||
#include "stm32f30x_rtc.h"
|
||||
#include "stm32f30x_spi.h"
|
||||
#include "stm32f30x_tim.h"
|
||||
#include "stm32f30x_usart.h"
|
||||
#include "stm32f30x_wwdg.h"
|
||||
#include "stm32f30x_misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Uncomment the line below to expanse the "assert_param" macro in the
|
||||
Standard Peripheral Library drivers code */
|
||||
/* #define USE_FULL_ASSERT 1 */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr: If expr is false, it calls assert_failed function which reports
|
||||
* the name of the source file and the source line number of the call
|
||||
* that failed. If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#endif /* __STM32F30X_CONF_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
535
lib/main/CMSIS/CM4/DeviceSupport/ST/STM32F30x/stm32f30x_gpio.c
Normal file
535
lib/main/CMSIS/CM4/DeviceSupport/ST/STM32F30x/stm32f30x_gpio.c
Normal file
|
|
@ -0,0 +1,535 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f30x_gpio.c
|
||||
* @author MCD Application Team
|
||||
* @version V1.1.1
|
||||
* @date 04-April-2014
|
||||
* @brief This file provides firmware functions to manage the following
|
||||
* functionalities of the GPIO peripheral:
|
||||
* + Initialization and Configuration functions
|
||||
* + GPIO Read and Write functions
|
||||
* + GPIO Alternate functions configuration functions
|
||||
*
|
||||
* @verbatim
|
||||
|
||||
|
||||
===============================================================================
|
||||
##### How to use this driver #####
|
||||
===============================================================================
|
||||
[..]
|
||||
(#) Enable the GPIO AHB clock using RCC_AHBPeriphClockCmd()
|
||||
(#) Configure the GPIO pin(s) using GPIO_Init()
|
||||
Four possible configuration are available for each pin:
|
||||
(++) Input: Floating, Pull-up, Pull-down.
|
||||
(++) Output: Push-Pull (Pull-up, Pull-down or no Pull),
|
||||
Open Drain (Pull-up, Pull-down or no Pull).
|
||||
In output mode, the speed is configurable: Low, Medium, Fast or High.
|
||||
(++) Alternate Function: Push-Pull (Pull-up, Pull-down or no Pull),
|
||||
Open Drain (Pull-up, Pull-down or no Pull).
|
||||
(++) Analog: required mode when a pin is to be used as ADC channel,
|
||||
DAC output or comparator input.
|
||||
(#) Peripherals alternate function:
|
||||
(++) For ADC, DAC and comparators, configure the desired pin in
|
||||
analog mode using GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AN
|
||||
(++) For other peripherals (TIM, USART...):
|
||||
(+++) Connect the pin to the desired peripherals' Alternate
|
||||
Function (AF) using GPIO_PinAFConfig() function.
|
||||
(+++) Configure the desired pin in alternate function mode using
|
||||
GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF
|
||||
(+++) Select the type, pull-up/pull-down and output speed via
|
||||
GPIO_PuPd, GPIO_OType and GPIO_Speed members.
|
||||
(+++) Call GPIO_Init() function.
|
||||
(#) To get the level of a pin configured in input mode use GPIO_ReadInputDataBit()
|
||||
(#) To set/reset the level of a pin configured in output mode use
|
||||
GPIO_SetBits()/GPIO_ResetBits()
|
||||
(#) During and just after reset, the alternate functions are not active
|
||||
and the GPIO pins are configured in input floating mode (except JTAG pins).
|
||||
(#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as
|
||||
general-purpose (PC14 and PC15, respectively) when the LSE
|
||||
oscillator is off. The LSE has priority over the GPIO function.
|
||||
(#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as general-purpose
|
||||
(PF0 and PF1 respectively) when the HSE oscillator is off. The HSE has
|
||||
the priority over the GPIO function.
|
||||
|
||||
@endverbatim
|
||||
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f30x_gpio.h"
|
||||
#include "stm32f30x_rcc.h"
|
||||
|
||||
/** @addtogroup STM32F30x_StdPeriph_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO
|
||||
* @brief GPIO driver modules
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/** @defgroup GPIO_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_Group1 Initialization and Configuration
|
||||
* @brief Initialization and Configuration
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### Initialization and Configuration #####
|
||||
===============================================================================
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Deinitializes the GPIOx peripheral registers to their default reset
|
||||
* values.
|
||||
* @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
void GPIO_DeInit(GPIO_TypeDef* GPIOx)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
|
||||
|
||||
if(GPIOx == GPIOA)
|
||||
{
|
||||
RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOA, ENABLE);
|
||||
RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOA, DISABLE);
|
||||
}
|
||||
else if(GPIOx == GPIOB)
|
||||
{
|
||||
RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOB, ENABLE);
|
||||
RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOB, DISABLE);
|
||||
}
|
||||
else if(GPIOx == GPIOC)
|
||||
{
|
||||
RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOC, ENABLE);
|
||||
RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOC, DISABLE);
|
||||
}
|
||||
else if(GPIOx == GPIOD)
|
||||
{
|
||||
RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOD, ENABLE);
|
||||
RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOD, DISABLE);
|
||||
}
|
||||
else if(GPIOx == GPIOE)
|
||||
{
|
||||
RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOE, ENABLE);
|
||||
RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOE, DISABLE);
|
||||
}
|
||||
else
|
||||
{
|
||||
if(GPIOx == GPIOF)
|
||||
{
|
||||
RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOF, ENABLE);
|
||||
RCC_AHBPeriphResetCmd(RCC_AHBPeriph_GPIOF, DISABLE);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Initializes the GPIOx peripheral according to the specified
|
||||
* parameters in the GPIO_InitStruct.
|
||||
* @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral.
|
||||
* @param GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that
|
||||
* contains the configuration information for the specified GPIO
|
||||
* peripheral.
|
||||
* @note GPIO_Pin: selects the pin to be configured:
|
||||
* GPIO_Pin_0->GPIO_Pin_15 for GPIOA, GPIOB, GPIOC, GPIOD and GPIOE;
|
||||
* GPIO_Pin_0->GPIO_Pin_2, GPIO_Pin_4, GPIO_Pin_6, GPIO_Pin_9
|
||||
* and GPIO_Pin_10 for GPIOF.
|
||||
* @retval None
|
||||
*/
|
||||
void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct)
|
||||
{
|
||||
uint32_t pinpos = 0x00, pos = 0x00 , currentpin = 0x00;
|
||||
uint32_t tmpreg = 0x00;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
|
||||
assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin));
|
||||
assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode));
|
||||
assert_param(IS_GPIO_PUPD(GPIO_InitStruct->GPIO_PuPd));
|
||||
|
||||
/*-------------------------- Configure the port pins -----------------------*/
|
||||
/*-- GPIO Mode Configuration --*/
|
||||
for (pinpos = 0x00; pinpos < 0x10; pinpos++)
|
||||
{
|
||||
pos = ((uint32_t)0x01) << pinpos;
|
||||
|
||||
/* Get the port pins position */
|
||||
currentpin = (GPIO_InitStruct->GPIO_Pin) & pos;
|
||||
|
||||
if (currentpin == pos)
|
||||
{
|
||||
if ((GPIO_InitStruct->GPIO_Mode == GPIO_Mode_OUT) || (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_AF))
|
||||
{
|
||||
/* Check Speed mode parameters */
|
||||
assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed));
|
||||
|
||||
/* Speed mode configuration */
|
||||
GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (pinpos * 2));
|
||||
GPIOx->OSPEEDR |= ((uint32_t)(GPIO_InitStruct->GPIO_Speed) << (pinpos * 2));
|
||||
|
||||
/* Check Output mode parameters */
|
||||
assert_param(IS_GPIO_OTYPE(GPIO_InitStruct->GPIO_OType));
|
||||
|
||||
/* Output mode configuration */
|
||||
GPIOx->OTYPER &= ~((GPIO_OTYPER_OT_0) << ((uint16_t)pinpos));
|
||||
GPIOx->OTYPER |= (uint16_t)(((uint16_t)GPIO_InitStruct->GPIO_OType) << ((uint16_t)pinpos));
|
||||
}
|
||||
|
||||
GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (pinpos * 2));
|
||||
|
||||
GPIOx->MODER |= (((uint32_t)GPIO_InitStruct->GPIO_Mode) << (pinpos * 2));
|
||||
|
||||
/* Use temporary variable to update PUPDR register configuration, to avoid
|
||||
unexpected transition in the GPIO pin configuration. */
|
||||
tmpreg = GPIOx->PUPDR;
|
||||
tmpreg &= ~(GPIO_PUPDR_PUPDR0 << ((uint16_t)pinpos * 2));
|
||||
tmpreg |= (((uint32_t)GPIO_InitStruct->GPIO_PuPd) << (pinpos * 2));
|
||||
GPIOx->PUPDR = tmpreg;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Fills each GPIO_InitStruct member with its default value.
|
||||
* @param GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure which will
|
||||
* be initialized.
|
||||
* @retval None
|
||||
*/
|
||||
void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct)
|
||||
{
|
||||
/* Reset GPIO init structure parameters values */
|
||||
GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All;
|
||||
GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN;
|
||||
GPIO_InitStruct->GPIO_Speed = GPIO_Speed_2MHz;
|
||||
GPIO_InitStruct->GPIO_OType = GPIO_OType_PP;
|
||||
GPIO_InitStruct->GPIO_PuPd = GPIO_PuPd_NOPULL;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Locks GPIO Pins configuration registers.
|
||||
* The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
|
||||
* GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
|
||||
* @note The configuration of the locked GPIO pins can no longer be modified
|
||||
* until the next reset.
|
||||
* @param GPIOx: where x can be (A or B or D) to select the GPIO peripheral.
|
||||
* @param GPIO_Pin: specifies the port bit to be written.
|
||||
* This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
|
||||
* @retval None
|
||||
*/
|
||||
void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
|
||||
{
|
||||
uint32_t tmp = 0x00010000;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_GPIO_LIST_PERIPH(GPIOx));
|
||||
assert_param(IS_GPIO_PIN(GPIO_Pin));
|
||||
|
||||
tmp |= GPIO_Pin;
|
||||
/* Set LCKK bit */
|
||||
GPIOx->LCKR = tmp;
|
||||
/* Reset LCKK bit */
|
||||
GPIOx->LCKR = GPIO_Pin;
|
||||
/* Set LCKK bit */
|
||||
GPIOx->LCKR = tmp;
|
||||
/* Read LCKK bit */
|
||||
tmp = GPIOx->LCKR;
|
||||
/* Read LCKK bit */
|
||||
tmp = GPIOx->LCKR;
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_Group2 GPIO Read and Write
|
||||
* @brief GPIO Read and Write
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### GPIO Read and Write #####
|
||||
===============================================================================
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Reads the specified input port pin.
|
||||
* @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral.
|
||||
* @param GPIO_Pin: specifies the port bit to read.
|
||||
* @note This parameter can be GPIO_Pin_x where x can be :
|
||||
* (0..15) for GPIOA, GPIOB, GPIOC, GPIOD or GPIOE;
|
||||
* (0..2, 4, 6, 9..10) for GPIOF.
|
||||
* @retval The input port pin value.
|
||||
*/
|
||||
uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
|
||||
{
|
||||
uint8_t bitstatus = 0x00;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
|
||||
assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
|
||||
|
||||
if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)Bit_RESET)
|
||||
{
|
||||
bitstatus = (uint8_t)Bit_SET;
|
||||
}
|
||||
else
|
||||
{
|
||||
bitstatus = (uint8_t)Bit_RESET;
|
||||
}
|
||||
return bitstatus;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Reads the specified input port pin.
|
||||
* @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral.
|
||||
* @retval The input port pin value.
|
||||
*/
|
||||
uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
|
||||
|
||||
return ((uint16_t)GPIOx->IDR);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Reads the specified output data port bit.
|
||||
* @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral.
|
||||
* @param GPIO_Pin: Specifies the port bit to read.
|
||||
* @note This parameter can be GPIO_Pin_x where x can be :
|
||||
* (0..15) for GPIOA, GPIOB, GPIOC, GPIOD or GPIOE;
|
||||
* (0..2, 4, 6, 9..10) for GPIOF.
|
||||
* @retval The output port pin value.
|
||||
*/
|
||||
uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
|
||||
{
|
||||
uint8_t bitstatus = 0x00;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
|
||||
assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
|
||||
|
||||
if ((GPIOx->ODR & GPIO_Pin) != (uint32_t)Bit_RESET)
|
||||
{
|
||||
bitstatus = (uint8_t)Bit_SET;
|
||||
}
|
||||
else
|
||||
{
|
||||
bitstatus = (uint8_t)Bit_RESET;
|
||||
}
|
||||
return bitstatus;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Reads the specified GPIO output data port.
|
||||
* @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral.
|
||||
* @retval GPIO output data port value.
|
||||
*/
|
||||
uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
|
||||
|
||||
return ((uint16_t)GPIOx->ODR);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Sets the selected data port bits.
|
||||
* @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral.
|
||||
* @param GPIO_Pin: specifies the port bits to be written.
|
||||
* @note This parameter can be GPIO_Pin_x where x can be :
|
||||
* (0..15) for GPIOA, GPIOB, GPIOC, GPIOD or GPIOE;
|
||||
* (0..2, 4, 6, 9..10) for GPIOF.
|
||||
* @retval None
|
||||
*/
|
||||
void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
|
||||
assert_param(IS_GPIO_PIN(GPIO_Pin));
|
||||
|
||||
GPIOx->BSRR = GPIO_Pin;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Clears the selected data port bits.
|
||||
* @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral.
|
||||
* @param GPIO_Pin: specifies the port bits to be written.
|
||||
* @note This parameter can be GPIO_Pin_x where x can be :
|
||||
* (0..15) for GPIOA, GPIOB, GPIOC, GPIOD or GPIOE;
|
||||
* (0..2, 4, 6, 9..10) for GPIOF.
|
||||
* @retval None
|
||||
*/
|
||||
void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
|
||||
assert_param(IS_GPIO_PIN(GPIO_Pin));
|
||||
|
||||
GPIOx->BRR = GPIO_Pin;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Sets or clears the selected data port bit.
|
||||
* @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral.
|
||||
* @param GPIO_Pin: specifies the port bit to be written.
|
||||
* @note This parameter can be GPIO_Pin_x where x can be :
|
||||
* (0..15) for GPIOA, GPIOB, GPIOC, GPIOD or GPIOE;
|
||||
* (0..2, 4, 6, 9..10) for GPIOF.
|
||||
* @param BitVal: specifies the value to be written to the selected bit.
|
||||
* This parameter can be one of the BitAction enumeration values:
|
||||
* @arg Bit_RESET: to clear the port pin
|
||||
* @arg Bit_SET: to set the port pin
|
||||
* @retval None
|
||||
*/
|
||||
void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
|
||||
assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
|
||||
assert_param(IS_GPIO_BIT_ACTION(BitVal));
|
||||
|
||||
if (BitVal != Bit_RESET)
|
||||
{
|
||||
GPIOx->BSRR = GPIO_Pin;
|
||||
}
|
||||
else
|
||||
{
|
||||
GPIOx->BRR = GPIO_Pin ;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Writes data to the specified GPIO data port.
|
||||
* @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral.
|
||||
* @param PortVal: specifies the value to be written to the port output data
|
||||
* register.
|
||||
* @retval None
|
||||
*/
|
||||
void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
|
||||
|
||||
GPIOx->ODR = PortVal;
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_Group3 GPIO Alternate functions configuration functions
|
||||
* @brief GPIO Alternate functions configuration functions
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### GPIO Alternate functions configuration functions #####
|
||||
===============================================================================
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Writes data to the specified GPIO data port.
|
||||
* @param GPIOx: where x can be (A, B, C, D, E or F) to select the GPIO peripheral.
|
||||
* @param GPIO_PinSource: specifies the pin for the Alternate function.
|
||||
* This parameter can be GPIO_PinSourcex where x can be (0..15).
|
||||
* @param GPIO_AF: selects the pin to be used as Alternate function.
|
||||
* This parameter can be one of the following value:
|
||||
* @arg GPIO_AF_0: JTCK-SWCLK, JTDI, JTDO/TRACESW0, JTMS-SWDAT, MCO, NJTRST,
|
||||
* TRACED, TRACECK.
|
||||
* @arg GPIO_AF_1: OUT, TIM2, TIM15, TIM16, TIM17.
|
||||
* @arg GPIO_AF_2: COMP1_OUT, TIM1, TIM2, TIM3, TIM4, TIM8, TIM15, TIM16.
|
||||
* @arg GPIO_AF_3: COMP7_OUT, TIM8, TIM15, Touch, HRTIM.
|
||||
* @arg GPIO_AF_4: I2C1, I2C2, TIM1, TIM8, TIM16, TIM17.
|
||||
* @arg GPIO_AF_5: IR_OUT, I2S2, I2S3, SPI1, SPI2, TIM8, USART4, USART5
|
||||
* @arg GPIO_AF_6: IR_OUT, I2S2, I2S3, SPI2, SPI3, TIM1, TIM8
|
||||
* @arg GPIO_AF_7: AOP2_OUT, CAN, COMP3_OUT, COMP5_OUT, COMP6_OUT, USART1,
|
||||
* USART2, USART3.
|
||||
* @arg GPIO_AF_8: COMP1_OUT, COMP2_OUT, COMP3_OUT, COMP4_OUT, COMP5_OUT,
|
||||
* COMP6_OUT.
|
||||
* @arg GPIO_AF_9: AOP4_OUT, CAN, TIM1, TIM8, TIM15.
|
||||
* @arg GPIO_AF_10: AOP1_OUT, AOP3_OUT, TIM2, TIM3, TIM4, TIM8, TIM17.
|
||||
* @arg GPIO_AF_11: TIM1, TIM8.
|
||||
* @arg GPIO_AF_12: TIM1, HRTIM.
|
||||
* @arg GPIO_AF_13: HRTIM, AOP2_OUT.
|
||||
* @arg GPIO_AF_14: USBDM, USBDP.
|
||||
* @arg GPIO_AF_15: OUT.
|
||||
* @note The pin should already been configured in Alternate Function mode(AF)
|
||||
* using GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF
|
||||
* @note Refer to the Alternate function mapping table in the device datasheet
|
||||
* for the detailed mapping of the system and peripherals alternate
|
||||
* function I/O pins.
|
||||
* @retval None
|
||||
*/
|
||||
void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_PinSource, uint8_t GPIO_AF)
|
||||
{
|
||||
uint32_t temp = 0x00;
|
||||
uint32_t temp_2 = 0x00;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
|
||||
assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource));
|
||||
assert_param(IS_GPIO_AF(GPIO_AF));
|
||||
|
||||
temp = ((uint32_t)(GPIO_AF) << ((uint32_t)((uint32_t)GPIO_PinSource & (uint32_t)0x07) * 4));
|
||||
GPIOx->AFR[GPIO_PinSource >> 0x03] &= ~((uint32_t)0xF << ((uint32_t)((uint32_t)GPIO_PinSource & (uint32_t)0x07) * 4));
|
||||
temp_2 = GPIOx->AFR[GPIO_PinSource >> 0x03] | temp;
|
||||
GPIOx->AFR[GPIO_PinSource >> 0x03] = temp_2;
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
400
lib/main/CMSIS/CM4/DeviceSupport/ST/STM32F30x/stm32f30x_gpio.h
Normal file
400
lib/main/CMSIS/CM4/DeviceSupport/ST/STM32F30x/stm32f30x_gpio.h
Normal file
|
|
@ -0,0 +1,400 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f30x_gpio.h
|
||||
* @author MCD Application Team
|
||||
* @version V1.1.1
|
||||
* @date 04-April-2014
|
||||
* @brief This file contains all the functions prototypes for the GPIO
|
||||
* firmware library.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F30x_GPIO_H
|
||||
#define __STM32F30x_GPIO_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f30x.h"
|
||||
|
||||
/** @addtogroup STM32F30x_StdPeriph_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup GPIO
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \
|
||||
((PERIPH) == GPIOB) || \
|
||||
((PERIPH) == GPIOC) || \
|
||||
((PERIPH) == GPIOD) || \
|
||||
((PERIPH) == GPIOE) || \
|
||||
((PERIPH) == GPIOF))
|
||||
|
||||
#define IS_GPIO_LIST_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \
|
||||
((PERIPH) == GPIOB) || \
|
||||
((PERIPH) == GPIOD))
|
||||
/** @defgroup Configuration_Mode_enumeration
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
GPIO_Mode_IN = 0x00, /*!< GPIO Input Mode */
|
||||
GPIO_Mode_OUT = 0x01, /*!< GPIO Output Mode */
|
||||
GPIO_Mode_AF = 0x02, /*!< GPIO Alternate function Mode */
|
||||
GPIO_Mode_AN = 0x03 /*!< GPIO Analog In/Out Mode */
|
||||
}GPIOMode_TypeDef;
|
||||
|
||||
#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_IN)|| ((MODE) == GPIO_Mode_OUT) || \
|
||||
((MODE) == GPIO_Mode_AF)|| ((MODE) == GPIO_Mode_AN))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup Output_type_enumeration
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
GPIO_OType_PP = 0x00,
|
||||
GPIO_OType_OD = 0x01
|
||||
}GPIOOType_TypeDef;
|
||||
|
||||
#define IS_GPIO_OTYPE(OTYPE) (((OTYPE) == GPIO_OType_PP) || ((OTYPE) == GPIO_OType_OD))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup Output_Maximum_frequency_enumeration
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
GPIO_Speed_Level_1 = 0x01, /*!< Fast Speed */
|
||||
GPIO_Speed_Level_2 = 0x02, /*!< Meduim Speed */
|
||||
GPIO_Speed_Level_3 = 0x03 /*!< High Speed */
|
||||
}GPIOSpeed_TypeDef;
|
||||
|
||||
#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_Level_1) || ((SPEED) == GPIO_Speed_Level_2) || \
|
||||
((SPEED) == GPIO_Speed_Level_3))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup Configuration_Pull-Up_Pull-Down_enumeration
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
GPIO_PuPd_NOPULL = 0x00,
|
||||
GPIO_PuPd_UP = 0x01,
|
||||
GPIO_PuPd_DOWN = 0x02
|
||||
}GPIOPuPd_TypeDef;
|
||||
|
||||
#define IS_GPIO_PUPD(PUPD) (((PUPD) == GPIO_PuPd_NOPULL) || ((PUPD) == GPIO_PuPd_UP) || \
|
||||
((PUPD) == GPIO_PuPd_DOWN))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup Bit_SET_and_Bit_RESET_enumeration
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
Bit_RESET = 0,
|
||||
Bit_SET
|
||||
}BitAction;
|
||||
|
||||
#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief GPIO Init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured.
|
||||
This parameter can be any value of @ref GPIO_pins_define */
|
||||
|
||||
GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins.
|
||||
This parameter can be a value of @ref GPIOMode_TypeDef */
|
||||
|
||||
GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins.
|
||||
This parameter can be a value of @ref GPIOSpeed_TypeDef */
|
||||
|
||||
GPIOOType_TypeDef GPIO_OType; /*!< Specifies the operating output type for the selected pins.
|
||||
This parameter can be a value of @ref GPIOOType_TypeDef */
|
||||
|
||||
GPIOPuPd_TypeDef GPIO_PuPd; /*!< Specifies the operating Pull-up/Pull down for the selected pins.
|
||||
This parameter can be a value of @ref GPIOPuPd_TypeDef */
|
||||
}GPIO_InitTypeDef;
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup GPIO_Exported_Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_pins_define
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_Pin_0 ((uint16_t)0x0001) /*!< Pin 0 selected */
|
||||
#define GPIO_Pin_1 ((uint16_t)0x0002) /*!< Pin 1 selected */
|
||||
#define GPIO_Pin_2 ((uint16_t)0x0004) /*!< Pin 2 selected */
|
||||
#define GPIO_Pin_3 ((uint16_t)0x0008) /*!< Pin 3 selected */
|
||||
#define GPIO_Pin_4 ((uint16_t)0x0010) /*!< Pin 4 selected */
|
||||
#define GPIO_Pin_5 ((uint16_t)0x0020) /*!< Pin 5 selected */
|
||||
#define GPIO_Pin_6 ((uint16_t)0x0040) /*!< Pin 6 selected */
|
||||
#define GPIO_Pin_7 ((uint16_t)0x0080) /*!< Pin 7 selected */
|
||||
#define GPIO_Pin_8 ((uint16_t)0x0100) /*!< Pin 8 selected */
|
||||
#define GPIO_Pin_9 ((uint16_t)0x0200) /*!< Pin 9 selected */
|
||||
#define GPIO_Pin_10 ((uint16_t)0x0400) /*!< Pin 10 selected */
|
||||
#define GPIO_Pin_11 ((uint16_t)0x0800) /*!< Pin 11 selected */
|
||||
#define GPIO_Pin_12 ((uint16_t)0x1000) /*!< Pin 12 selected */
|
||||
#define GPIO_Pin_13 ((uint16_t)0x2000) /*!< Pin 13 selected */
|
||||
#define GPIO_Pin_14 ((uint16_t)0x4000) /*!< Pin 14 selected */
|
||||
#define GPIO_Pin_15 ((uint16_t)0x8000) /*!< Pin 15 selected */
|
||||
#define GPIO_Pin_All ((uint16_t)0xFFFF) /*!< All pins selected */
|
||||
|
||||
#define IS_GPIO_PIN(PIN) ((PIN) != (uint16_t)0x00)
|
||||
|
||||
#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \
|
||||
((PIN) == GPIO_Pin_1) || \
|
||||
((PIN) == GPIO_Pin_2) || \
|
||||
((PIN) == GPIO_Pin_3) || \
|
||||
((PIN) == GPIO_Pin_4) || \
|
||||
((PIN) == GPIO_Pin_5) || \
|
||||
((PIN) == GPIO_Pin_6) || \
|
||||
((PIN) == GPIO_Pin_7) || \
|
||||
((PIN) == GPIO_Pin_8) || \
|
||||
((PIN) == GPIO_Pin_9) || \
|
||||
((PIN) == GPIO_Pin_10) || \
|
||||
((PIN) == GPIO_Pin_11) || \
|
||||
((PIN) == GPIO_Pin_12) || \
|
||||
((PIN) == GPIO_Pin_13) || \
|
||||
((PIN) == GPIO_Pin_14) || \
|
||||
((PIN) == GPIO_Pin_15))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_Pin_sources
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_PinSource0 ((uint8_t)0x00)
|
||||
#define GPIO_PinSource1 ((uint8_t)0x01)
|
||||
#define GPIO_PinSource2 ((uint8_t)0x02)
|
||||
#define GPIO_PinSource3 ((uint8_t)0x03)
|
||||
#define GPIO_PinSource4 ((uint8_t)0x04)
|
||||
#define GPIO_PinSource5 ((uint8_t)0x05)
|
||||
#define GPIO_PinSource6 ((uint8_t)0x06)
|
||||
#define GPIO_PinSource7 ((uint8_t)0x07)
|
||||
#define GPIO_PinSource8 ((uint8_t)0x08)
|
||||
#define GPIO_PinSource9 ((uint8_t)0x09)
|
||||
#define GPIO_PinSource10 ((uint8_t)0x0A)
|
||||
#define GPIO_PinSource11 ((uint8_t)0x0B)
|
||||
#define GPIO_PinSource12 ((uint8_t)0x0C)
|
||||
#define GPIO_PinSource13 ((uint8_t)0x0D)
|
||||
#define GPIO_PinSource14 ((uint8_t)0x0E)
|
||||
#define GPIO_PinSource15 ((uint8_t)0x0F)
|
||||
|
||||
#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \
|
||||
((PINSOURCE) == GPIO_PinSource1) || \
|
||||
((PINSOURCE) == GPIO_PinSource2) || \
|
||||
((PINSOURCE) == GPIO_PinSource3) || \
|
||||
((PINSOURCE) == GPIO_PinSource4) || \
|
||||
((PINSOURCE) == GPIO_PinSource5) || \
|
||||
((PINSOURCE) == GPIO_PinSource6) || \
|
||||
((PINSOURCE) == GPIO_PinSource7) || \
|
||||
((PINSOURCE) == GPIO_PinSource8) || \
|
||||
((PINSOURCE) == GPIO_PinSource9) || \
|
||||
((PINSOURCE) == GPIO_PinSource10) || \
|
||||
((PINSOURCE) == GPIO_PinSource11) || \
|
||||
((PINSOURCE) == GPIO_PinSource12) || \
|
||||
((PINSOURCE) == GPIO_PinSource13) || \
|
||||
((PINSOURCE) == GPIO_PinSource14) || \
|
||||
((PINSOURCE) == GPIO_PinSource15))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_Alternate_function_selection_define
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief AF 0 selection
|
||||
*/
|
||||
#define GPIO_AF_0 ((uint8_t)0x00) /* JTCK-SWCLK, JTDI, JTDO/TRACESW0, JTMS-SWDAT,
|
||||
MCO, NJTRST, TRACED, TRACECK */
|
||||
/**
|
||||
* @brief AF 1 selection
|
||||
*/
|
||||
#define GPIO_AF_1 ((uint8_t)0x01) /* OUT, TIM2, TIM15, TIM16, TIM17 */
|
||||
|
||||
/**
|
||||
* @brief AF 2 selection
|
||||
*/
|
||||
#define GPIO_AF_2 ((uint8_t)0x02) /* COMP1_OUT, TIM1, TIM2, TIM3, TIM4, TIM8, TIM15, TIM16 */
|
||||
|
||||
/**
|
||||
* @brief AF 3 selection
|
||||
*/
|
||||
#define GPIO_AF_3 ((uint8_t)0x03) /* COMP7_OUT, TIM8, TIM15, Touch, HRTIM1 */
|
||||
|
||||
/**
|
||||
* @brief AF 4 selection
|
||||
*/
|
||||
#define GPIO_AF_4 ((uint8_t)0x04) /* I2C1, I2C2, TIM1, TIM8, TIM16, TIM17 */
|
||||
|
||||
/**
|
||||
* @brief AF 5 selection
|
||||
*/
|
||||
#define GPIO_AF_5 ((uint8_t)0x05) /* IR_OUT, I2S2, I2S3, SPI1, SPI2, TIM8, USART4, USART5 */
|
||||
|
||||
/**
|
||||
* @brief AF 6 selection
|
||||
*/
|
||||
#define GPIO_AF_6 ((uint8_t)0x06) /* IR_OUT, I2S2, I2S3, SPI2, SPI3, TIM1, TIM8 */
|
||||
|
||||
/**
|
||||
* @brief AF 7 selection
|
||||
*/
|
||||
#define GPIO_AF_7 ((uint8_t)0x07) /* AOP2_OUT, CAN, COMP3_OUT, COMP5_OUT, COMP6_OUT,
|
||||
USART1, USART2, USART3 */
|
||||
|
||||
/**
|
||||
* @brief AF 8 selection
|
||||
*/
|
||||
#define GPIO_AF_8 ((uint8_t)0x08) /* COMP1_OUT, COMP2_OUT, COMP3_OUT, COMP4_OUT,
|
||||
COMP5_OUT, COMP6_OUT */
|
||||
|
||||
/**
|
||||
* @brief AF 9 selection
|
||||
*/
|
||||
#define GPIO_AF_9 ((uint8_t)0x09) /* AOP4_OUT, CAN, TIM1, TIM8, TIM15 */
|
||||
|
||||
/**
|
||||
* @brief AF 10 selection
|
||||
*/
|
||||
#define GPIO_AF_10 ((uint8_t)0x0A) /* AOP1_OUT, AOP3_OUT, TIM2, TIM3, TIM4, TIM8, TIM17 */
|
||||
|
||||
/**
|
||||
* @brief AF 11 selection
|
||||
*/
|
||||
#define GPIO_AF_11 ((uint8_t)0x0B) /* TIM1, TIM8 */
|
||||
|
||||
/**
|
||||
* @brief AF 12 selection
|
||||
*/
|
||||
#define GPIO_AF_12 ((uint8_t)0x0C) /* TIM1, HRTIM1 */
|
||||
|
||||
/**
|
||||
* @brief AF 13 selection
|
||||
*/
|
||||
#define GPIO_AF_13 ((uint8_t)0x0D) /* HRTIM1, AOP2_OUT */
|
||||
|
||||
/**
|
||||
* @brief AF 14 selection
|
||||
*/
|
||||
#define GPIO_AF_14 ((uint8_t)0x0E) /* USBDM, USBDP */
|
||||
|
||||
/**
|
||||
* @brief AF 15 selection
|
||||
*/
|
||||
#define GPIO_AF_15 ((uint8_t)0x0F) /* OUT */
|
||||
|
||||
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF_0)||((AF) == GPIO_AF_1)||\
|
||||
((AF) == GPIO_AF_2)||((AF) == GPIO_AF_3)||\
|
||||
((AF) == GPIO_AF_4)||((AF) == GPIO_AF_5)||\
|
||||
((AF) == GPIO_AF_6)||((AF) == GPIO_AF_7)||\
|
||||
((AF) == GPIO_AF_8)||((AF) == GPIO_AF_9)||\
|
||||
((AF) == GPIO_AF_10)||((AF) == GPIO_AF_11)||\
|
||||
((AF) == GPIO_AF_12)||((AF) == GPIO_AF_13)||\
|
||||
((AF) == GPIO_AF_14)||((AF) == GPIO_AF_15))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_Speed_Legacy
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define GPIO_Speed_10MHz GPIO_Speed_Level_1 /*!< Fast Speed:10MHz */
|
||||
#define GPIO_Speed_2MHz GPIO_Speed_Level_2 /*!< Medium Speed:2MHz */
|
||||
#define GPIO_Speed_50MHz GPIO_Speed_Level_3 /*!< High Speed:50MHz */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
/* Function used to set the GPIO configuration to the default reset state *****/
|
||||
void GPIO_DeInit(GPIO_TypeDef* GPIOx);
|
||||
|
||||
/* Initialization and Configuration functions *********************************/
|
||||
void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct);
|
||||
void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct);
|
||||
void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
|
||||
/* GPIO Read and Write functions **********************************************/
|
||||
uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx);
|
||||
uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx);
|
||||
void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal);
|
||||
void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal);
|
||||
|
||||
/* GPIO Alternate functions configuration functions ***************************/
|
||||
void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_PinSource, uint8_t GPIO_AF);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F30x_GPIO_H */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
1951
lib/main/CMSIS/CM4/DeviceSupport/ST/STM32F30x/stm32f30x_rcc.c
Normal file
1951
lib/main/CMSIS/CM4/DeviceSupport/ST/STM32F30x/stm32f30x_rcc.c
Normal file
File diff suppressed because it is too large
Load diff
699
lib/main/CMSIS/CM4/DeviceSupport/ST/STM32F30x/stm32f30x_rcc.h
Normal file
699
lib/main/CMSIS/CM4/DeviceSupport/ST/STM32F30x/stm32f30x_rcc.h
Normal file
|
|
@ -0,0 +1,699 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f30x_rcc.h
|
||||
* @author MCD Application Team
|
||||
* @version V1.1.1
|
||||
* @date 04-April-2014
|
||||
* @brief This file contains all the functions prototypes for the RCC
|
||||
* firmware library.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F30x_RCC_H
|
||||
#define __STM32F30x_RCC_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f30x.h"
|
||||
|
||||
/** @addtogroup STM32F30x_StdPeriph_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup RCC
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint32_t SYSCLK_Frequency;
|
||||
uint32_t HCLK_Frequency;
|
||||
uint32_t PCLK1_Frequency;
|
||||
uint32_t PCLK2_Frequency;
|
||||
uint32_t ADC12CLK_Frequency;
|
||||
uint32_t ADC34CLK_Frequency;
|
||||
uint32_t I2C1CLK_Frequency;
|
||||
uint32_t I2C2CLK_Frequency;
|
||||
uint32_t I2C3CLK_Frequency;
|
||||
uint32_t TIM1CLK_Frequency;
|
||||
uint32_t HRTIM1CLK_Frequency;
|
||||
uint32_t TIM8CLK_Frequency;
|
||||
uint32_t USART1CLK_Frequency;
|
||||
uint32_t USART2CLK_Frequency;
|
||||
uint32_t USART3CLK_Frequency;
|
||||
uint32_t UART4CLK_Frequency;
|
||||
uint32_t UART5CLK_Frequency;
|
||||
uint32_t TIM15CLK_Frequency;
|
||||
uint32_t TIM16CLK_Frequency;
|
||||
uint32_t TIM17CLK_Frequency;
|
||||
}RCC_ClocksTypeDef;
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup RCC_Exported_Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_HSE_configuration
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define RCC_HSE_OFF ((uint8_t)0x00)
|
||||
#define RCC_HSE_ON ((uint8_t)0x01)
|
||||
#define RCC_HSE_Bypass ((uint8_t)0x05)
|
||||
#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
|
||||
((HSE) == RCC_HSE_Bypass))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_PLL_Clock_Source
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define RCC_PLLSource_HSI_Div2 RCC_CFGR_PLLSRC_HSI_Div2
|
||||
#define RCC_PLLSource_PREDIV1 RCC_CFGR_PLLSRC_PREDIV1
|
||||
|
||||
#define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \
|
||||
((SOURCE) == RCC_PLLSource_PREDIV1))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_PLL_Multiplication_Factor
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define RCC_PLLMul_2 RCC_CFGR_PLLMULL2
|
||||
#define RCC_PLLMul_3 RCC_CFGR_PLLMULL3
|
||||
#define RCC_PLLMul_4 RCC_CFGR_PLLMULL4
|
||||
#define RCC_PLLMul_5 RCC_CFGR_PLLMULL5
|
||||
#define RCC_PLLMul_6 RCC_CFGR_PLLMULL6
|
||||
#define RCC_PLLMul_7 RCC_CFGR_PLLMULL7
|
||||
#define RCC_PLLMul_8 RCC_CFGR_PLLMULL8
|
||||
#define RCC_PLLMul_9 RCC_CFGR_PLLMULL9
|
||||
#define RCC_PLLMul_10 RCC_CFGR_PLLMULL10
|
||||
#define RCC_PLLMul_11 RCC_CFGR_PLLMULL11
|
||||
#define RCC_PLLMul_12 RCC_CFGR_PLLMULL12
|
||||
#define RCC_PLLMul_13 RCC_CFGR_PLLMULL13
|
||||
#define RCC_PLLMul_14 RCC_CFGR_PLLMULL14
|
||||
#define RCC_PLLMul_15 RCC_CFGR_PLLMULL15
|
||||
#define RCC_PLLMul_16 RCC_CFGR_PLLMULL16
|
||||
#define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_2) || ((MUL) == RCC_PLLMul_3) || \
|
||||
((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \
|
||||
((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \
|
||||
((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \
|
||||
((MUL) == RCC_PLLMul_10) || ((MUL) == RCC_PLLMul_11) || \
|
||||
((MUL) == RCC_PLLMul_12) || ((MUL) == RCC_PLLMul_13) || \
|
||||
((MUL) == RCC_PLLMul_14) || ((MUL) == RCC_PLLMul_15) || \
|
||||
((MUL) == RCC_PLLMul_16))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_PREDIV1_division_factor
|
||||
* @{
|
||||
*/
|
||||
#define RCC_PREDIV1_Div1 RCC_CFGR2_PREDIV1_DIV1
|
||||
#define RCC_PREDIV1_Div2 RCC_CFGR2_PREDIV1_DIV2
|
||||
#define RCC_PREDIV1_Div3 RCC_CFGR2_PREDIV1_DIV3
|
||||
#define RCC_PREDIV1_Div4 RCC_CFGR2_PREDIV1_DIV4
|
||||
#define RCC_PREDIV1_Div5 RCC_CFGR2_PREDIV1_DIV5
|
||||
#define RCC_PREDIV1_Div6 RCC_CFGR2_PREDIV1_DIV6
|
||||
#define RCC_PREDIV1_Div7 RCC_CFGR2_PREDIV1_DIV7
|
||||
#define RCC_PREDIV1_Div8 RCC_CFGR2_PREDIV1_DIV8
|
||||
#define RCC_PREDIV1_Div9 RCC_CFGR2_PREDIV1_DIV9
|
||||
#define RCC_PREDIV1_Div10 RCC_CFGR2_PREDIV1_DIV10
|
||||
#define RCC_PREDIV1_Div11 RCC_CFGR2_PREDIV1_DIV11
|
||||
#define RCC_PREDIV1_Div12 RCC_CFGR2_PREDIV1_DIV12
|
||||
#define RCC_PREDIV1_Div13 RCC_CFGR2_PREDIV1_DIV13
|
||||
#define RCC_PREDIV1_Div14 RCC_CFGR2_PREDIV1_DIV14
|
||||
#define RCC_PREDIV1_Div15 RCC_CFGR2_PREDIV1_DIV15
|
||||
#define RCC_PREDIV1_Div16 RCC_CFGR2_PREDIV1_DIV16
|
||||
|
||||
#define IS_RCC_PREDIV1(PREDIV1) (((PREDIV1) == RCC_PREDIV1_Div1) || ((PREDIV1) == RCC_PREDIV1_Div2) || \
|
||||
((PREDIV1) == RCC_PREDIV1_Div3) || ((PREDIV1) == RCC_PREDIV1_Div4) || \
|
||||
((PREDIV1) == RCC_PREDIV1_Div5) || ((PREDIV1) == RCC_PREDIV1_Div6) || \
|
||||
((PREDIV1) == RCC_PREDIV1_Div7) || ((PREDIV1) == RCC_PREDIV1_Div8) || \
|
||||
((PREDIV1) == RCC_PREDIV1_Div9) || ((PREDIV1) == RCC_PREDIV1_Div10) || \
|
||||
((PREDIV1) == RCC_PREDIV1_Div11) || ((PREDIV1) == RCC_PREDIV1_Div12) || \
|
||||
((PREDIV1) == RCC_PREDIV1_Div13) || ((PREDIV1) == RCC_PREDIV1_Div14) || \
|
||||
((PREDIV1) == RCC_PREDIV1_Div15) || ((PREDIV1) == RCC_PREDIV1_Div16))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_System_Clock_Source
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define RCC_SYSCLKSource_HSI RCC_CFGR_SW_HSI
|
||||
#define RCC_SYSCLKSource_HSE RCC_CFGR_SW_HSE
|
||||
#define RCC_SYSCLKSource_PLLCLK RCC_CFGR_SW_PLL
|
||||
#define IS_RCC_SYSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSource_HSI) || \
|
||||
((SOURCE) == RCC_SYSCLKSource_HSE) || \
|
||||
((SOURCE) == RCC_SYSCLKSource_PLLCLK))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_AHB_Clock_Source
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define RCC_SYSCLK_Div1 RCC_CFGR_HPRE_DIV1
|
||||
#define RCC_SYSCLK_Div2 RCC_CFGR_HPRE_DIV2
|
||||
#define RCC_SYSCLK_Div4 RCC_CFGR_HPRE_DIV4
|
||||
#define RCC_SYSCLK_Div8 RCC_CFGR_HPRE_DIV8
|
||||
#define RCC_SYSCLK_Div16 RCC_CFGR_HPRE_DIV16
|
||||
#define RCC_SYSCLK_Div64 RCC_CFGR_HPRE_DIV64
|
||||
#define RCC_SYSCLK_Div128 RCC_CFGR_HPRE_DIV128
|
||||
#define RCC_SYSCLK_Div256 RCC_CFGR_HPRE_DIV256
|
||||
#define RCC_SYSCLK_Div512 RCC_CFGR_HPRE_DIV512
|
||||
#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_Div1) || ((HCLK) == RCC_SYSCLK_Div2) || \
|
||||
((HCLK) == RCC_SYSCLK_Div4) || ((HCLK) == RCC_SYSCLK_Div8) || \
|
||||
((HCLK) == RCC_SYSCLK_Div16) || ((HCLK) == RCC_SYSCLK_Div64) || \
|
||||
((HCLK) == RCC_SYSCLK_Div128) || ((HCLK) == RCC_SYSCLK_Div256) || \
|
||||
((HCLK) == RCC_SYSCLK_Div512))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_APB1_APB2_clock_source
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define RCC_HCLK_Div1 ((uint32_t)0x00000000)
|
||||
#define RCC_HCLK_Div2 ((uint32_t)0x00000400)
|
||||
#define RCC_HCLK_Div4 ((uint32_t)0x00000500)
|
||||
#define RCC_HCLK_Div8 ((uint32_t)0x00000600)
|
||||
#define RCC_HCLK_Div16 ((uint32_t)0x00000700)
|
||||
#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_Div1) || ((PCLK) == RCC_HCLK_Div2) || \
|
||||
((PCLK) == RCC_HCLK_Div4) || ((PCLK) == RCC_HCLK_Div8) || \
|
||||
((PCLK) == RCC_HCLK_Div16))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_ADC_clock_source
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* ADC1 & ADC2 */
|
||||
#define RCC_ADC12PLLCLK_OFF ((uint32_t)0x00000000)
|
||||
#define RCC_ADC12PLLCLK_Div1 ((uint32_t)0x00000100)
|
||||
#define RCC_ADC12PLLCLK_Div2 ((uint32_t)0x00000110)
|
||||
#define RCC_ADC12PLLCLK_Div4 ((uint32_t)0x00000120)
|
||||
#define RCC_ADC12PLLCLK_Div6 ((uint32_t)0x00000130)
|
||||
#define RCC_ADC12PLLCLK_Div8 ((uint32_t)0x00000140)
|
||||
#define RCC_ADC12PLLCLK_Div10 ((uint32_t)0x00000150)
|
||||
#define RCC_ADC12PLLCLK_Div12 ((uint32_t)0x00000160)
|
||||
#define RCC_ADC12PLLCLK_Div16 ((uint32_t)0x00000170)
|
||||
#define RCC_ADC12PLLCLK_Div32 ((uint32_t)0x00000180)
|
||||
#define RCC_ADC12PLLCLK_Div64 ((uint32_t)0x00000190)
|
||||
#define RCC_ADC12PLLCLK_Div128 ((uint32_t)0x000001A0)
|
||||
#define RCC_ADC12PLLCLK_Div256 ((uint32_t)0x000001B0)
|
||||
|
||||
/* ADC3 & ADC4 */
|
||||
#define RCC_ADC34PLLCLK_OFF ((uint32_t)0x10000000)
|
||||
#define RCC_ADC34PLLCLK_Div1 ((uint32_t)0x10002000)
|
||||
#define RCC_ADC34PLLCLK_Div2 ((uint32_t)0x10002200)
|
||||
#define RCC_ADC34PLLCLK_Div4 ((uint32_t)0x10002400)
|
||||
#define RCC_ADC34PLLCLK_Div6 ((uint32_t)0x10002600)
|
||||
#define RCC_ADC34PLLCLK_Div8 ((uint32_t)0x10002800)
|
||||
#define RCC_ADC34PLLCLK_Div10 ((uint32_t)0x10002A00)
|
||||
#define RCC_ADC34PLLCLK_Div12 ((uint32_t)0x10002C00)
|
||||
#define RCC_ADC34PLLCLK_Div16 ((uint32_t)0x10002E00)
|
||||
#define RCC_ADC34PLLCLK_Div32 ((uint32_t)0x10003000)
|
||||
#define RCC_ADC34PLLCLK_Div64 ((uint32_t)0x10003200)
|
||||
#define RCC_ADC34PLLCLK_Div128 ((uint32_t)0x10003400)
|
||||
#define RCC_ADC34PLLCLK_Div256 ((uint32_t)0x10003600)
|
||||
|
||||
#define IS_RCC_ADCCLK(ADCCLK) (((ADCCLK) == RCC_ADC12PLLCLK_OFF) || ((ADCCLK) == RCC_ADC12PLLCLK_Div1) || \
|
||||
((ADCCLK) == RCC_ADC12PLLCLK_Div2) || ((ADCCLK) == RCC_ADC12PLLCLK_Div4) || \
|
||||
((ADCCLK) == RCC_ADC12PLLCLK_Div6) || ((ADCCLK) == RCC_ADC12PLLCLK_Div8) || \
|
||||
((ADCCLK) == RCC_ADC12PLLCLK_Div10) || ((ADCCLK) == RCC_ADC12PLLCLK_Div12) || \
|
||||
((ADCCLK) == RCC_ADC12PLLCLK_Div16) || ((ADCCLK) == RCC_ADC12PLLCLK_Div32) || \
|
||||
((ADCCLK) == RCC_ADC12PLLCLK_Div64) || ((ADCCLK) == RCC_ADC12PLLCLK_Div128) || \
|
||||
((ADCCLK) == RCC_ADC12PLLCLK_Div256) || ((ADCCLK) == RCC_ADC34PLLCLK_OFF) || \
|
||||
((ADCCLK) == RCC_ADC34PLLCLK_Div1) || ((ADCCLK) == RCC_ADC34PLLCLK_Div2) || \
|
||||
((ADCCLK) == RCC_ADC34PLLCLK_Div4) || ((ADCCLK) == RCC_ADC34PLLCLK_Div6) || \
|
||||
((ADCCLK) == RCC_ADC34PLLCLK_Div8) || ((ADCCLK) == RCC_ADC34PLLCLK_Div10) || \
|
||||
((ADCCLK) == RCC_ADC34PLLCLK_Div12) || ((ADCCLK) == RCC_ADC34PLLCLK_Div16) || \
|
||||
((ADCCLK) == RCC_ADC34PLLCLK_Div32) || ((ADCCLK) == RCC_ADC34PLLCLK_Div64) || \
|
||||
((ADCCLK) == RCC_ADC34PLLCLK_Div128) || ((ADCCLK) == RCC_ADC34PLLCLK_Div256))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_TIM_clock_source
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define RCC_TIM1CLK_HCLK ((uint32_t)0x00000000)
|
||||
#define RCC_TIM1CLK_PLLCLK RCC_CFGR3_TIM1SW
|
||||
|
||||
#define RCC_TIM8CLK_HCLK ((uint32_t)0x10000000)
|
||||
#define RCC_TIM8CLK_PLLCLK ((uint32_t)0x10000200)
|
||||
|
||||
#define RCC_TIM15CLK_HCLK ((uint32_t)0x20000000)
|
||||
#define RCC_TIM15CLK_PLLCLK ((uint32_t)0x20000400)
|
||||
|
||||
#define RCC_TIM16CLK_HCLK ((uint32_t)0x30000000)
|
||||
#define RCC_TIM16CLK_PLLCLK ((uint32_t)0x30000800)
|
||||
|
||||
#define RCC_TIM17CLK_HCLK ((uint32_t)0x40000000)
|
||||
#define RCC_TIM17CLK_PLLCLK ((uint32_t)0x40002000)
|
||||
|
||||
#define IS_RCC_TIMCLK(TIMCLK) (((TIMCLK) == RCC_TIM1CLK_HCLK) || ((TIMCLK) == RCC_TIM1CLK_PLLCLK) || \
|
||||
((TIMCLK) == RCC_TIM8CLK_HCLK) || ((TIMCLK) == RCC_TIM8CLK_PLLCLK) || \
|
||||
((TIMCLK) == RCC_TIM15CLK_HCLK) || ((TIMCLK) == RCC_TIM15CLK_PLLCLK) || \
|
||||
((TIMCLK) == RCC_TIM16CLK_HCLK) || ((TIMCLK) == RCC_TIM16CLK_PLLCLK) || \
|
||||
((TIMCLK) == RCC_TIM17CLK_HCLK) || ((TIMCLK) == RCC_TIM17CLK_PLLCLK))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_HRTIM_clock_source
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define RCC_HRTIM1CLK_HCLK ((uint32_t)0x00000000)
|
||||
#define RCC_HRTIM1CLK_PLLCLK RCC_CFGR3_HRTIM1SW
|
||||
|
||||
#define IS_RCC_HRTIMCLK(HRTIMCLK) (((HRTIMCLK) == RCC_HRTIM1CLK_HCLK) || ((HRTIMCLK) == RCC_HRTIM1CLK_PLLCLK))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_I2C_clock_source
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define RCC_I2C1CLK_HSI ((uint32_t)0x00000000)
|
||||
#define RCC_I2C1CLK_SYSCLK RCC_CFGR3_I2C1SW
|
||||
|
||||
#define RCC_I2C2CLK_HSI ((uint32_t)0x10000000)
|
||||
#define RCC_I2C2CLK_SYSCLK ((uint32_t)0x10000020)
|
||||
|
||||
#define RCC_I2C3CLK_HSI ((uint32_t)0x20000000)
|
||||
#define RCC_I2C3CLK_SYSCLK ((uint32_t)0x20000040)
|
||||
|
||||
#define IS_RCC_I2CCLK(I2CCLK) (((I2CCLK) == RCC_I2C1CLK_HSI) || ((I2CCLK) == RCC_I2C1CLK_SYSCLK) || \
|
||||
((I2CCLK) == RCC_I2C2CLK_HSI) || ((I2CCLK) == RCC_I2C2CLK_SYSCLK) || \
|
||||
((I2CCLK) == RCC_I2C3CLK_HSI) || ((I2CCLK) == RCC_I2C3CLK_SYSCLK))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_USART_clock_source
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define RCC_USART1CLK_PCLK ((uint32_t)0x10000000)
|
||||
#define RCC_USART1CLK_SYSCLK ((uint32_t)0x10000001)
|
||||
#define RCC_USART1CLK_LSE ((uint32_t)0x10000002)
|
||||
#define RCC_USART1CLK_HSI ((uint32_t)0x10000003)
|
||||
|
||||
#define RCC_USART2CLK_PCLK ((uint32_t)0x20000000)
|
||||
#define RCC_USART2CLK_SYSCLK ((uint32_t)0x20010000)
|
||||
#define RCC_USART2CLK_LSE ((uint32_t)0x20020000)
|
||||
#define RCC_USART2CLK_HSI ((uint32_t)0x20030000)
|
||||
|
||||
#define RCC_USART3CLK_PCLK ((uint32_t)0x30000000)
|
||||
#define RCC_USART3CLK_SYSCLK ((uint32_t)0x30040000)
|
||||
#define RCC_USART3CLK_LSE ((uint32_t)0x30080000)
|
||||
#define RCC_USART3CLK_HSI ((uint32_t)0x300C0000)
|
||||
|
||||
#define RCC_UART4CLK_PCLK ((uint32_t)0x40000000)
|
||||
#define RCC_UART4CLK_SYSCLK ((uint32_t)0x40100000)
|
||||
#define RCC_UART4CLK_LSE ((uint32_t)0x40200000)
|
||||
#define RCC_UART4CLK_HSI ((uint32_t)0x40300000)
|
||||
|
||||
#define RCC_UART5CLK_PCLK ((uint32_t)0x50000000)
|
||||
#define RCC_UART5CLK_SYSCLK ((uint32_t)0x50400000)
|
||||
#define RCC_UART5CLK_LSE ((uint32_t)0x50800000)
|
||||
#define RCC_UART5CLK_HSI ((uint32_t)0x50C00000)
|
||||
|
||||
#define IS_RCC_USARTCLK(USARTCLK) (((USARTCLK) == RCC_USART1CLK_PCLK) || ((USARTCLK) == RCC_USART1CLK_SYSCLK) || \
|
||||
((USARTCLK) == RCC_USART1CLK_LSE) || ((USARTCLK) == RCC_USART1CLK_HSI) ||\
|
||||
((USARTCLK) == RCC_USART2CLK_PCLK) || ((USARTCLK) == RCC_USART2CLK_SYSCLK) || \
|
||||
((USARTCLK) == RCC_USART2CLK_LSE) || ((USARTCLK) == RCC_USART2CLK_HSI) || \
|
||||
((USARTCLK) == RCC_USART3CLK_PCLK) || ((USARTCLK) == RCC_USART3CLK_SYSCLK) || \
|
||||
((USARTCLK) == RCC_USART3CLK_LSE) || ((USARTCLK) == RCC_USART3CLK_HSI) || \
|
||||
((USARTCLK) == RCC_UART4CLK_PCLK) || ((USARTCLK) == RCC_UART4CLK_SYSCLK) || \
|
||||
((USARTCLK) == RCC_UART4CLK_LSE) || ((USARTCLK) == RCC_UART4CLK_HSI) || \
|
||||
((USARTCLK) == RCC_UART5CLK_PCLK) || ((USARTCLK) == RCC_UART5CLK_SYSCLK) || \
|
||||
((USARTCLK) == RCC_UART5CLK_LSE) || ((USARTCLK) == RCC_UART5CLK_HSI))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_Interrupt_Source
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define RCC_IT_LSIRDY ((uint8_t)0x01)
|
||||
#define RCC_IT_LSERDY ((uint8_t)0x02)
|
||||
#define RCC_IT_HSIRDY ((uint8_t)0x04)
|
||||
#define RCC_IT_HSERDY ((uint8_t)0x08)
|
||||
#define RCC_IT_PLLRDY ((uint8_t)0x10)
|
||||
#define RCC_IT_CSS ((uint8_t)0x80)
|
||||
|
||||
#define IS_RCC_IT(IT) ((((IT) & (uint8_t)0xC0) == 0x00) && ((IT) != 0x00))
|
||||
|
||||
#define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \
|
||||
((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \
|
||||
((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS))
|
||||
|
||||
|
||||
#define IS_RCC_CLEAR_IT(IT) ((((IT) & (uint8_t)0x40) == 0x00) && ((IT) != 0x00))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_LSE_configuration
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define RCC_LSE_OFF ((uint32_t)0x00000000)
|
||||
#define RCC_LSE_ON RCC_BDCR_LSEON
|
||||
#define RCC_LSE_Bypass ((uint32_t)(RCC_BDCR_LSEON | RCC_BDCR_LSEBYP))
|
||||
#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
|
||||
((LSE) == RCC_LSE_Bypass))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_RTC_Clock_Source
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define RCC_RTCCLKSource_LSE RCC_BDCR_RTCSEL_LSE
|
||||
#define RCC_RTCCLKSource_LSI RCC_BDCR_RTCSEL_LSI
|
||||
#define RCC_RTCCLKSource_HSE_Div32 RCC_BDCR_RTCSEL_HSE
|
||||
|
||||
#define IS_RCC_RTCCLK_SOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSource_LSE) || \
|
||||
((SOURCE) == RCC_RTCCLKSource_LSI) || \
|
||||
((SOURCE) == RCC_RTCCLKSource_HSE_Div32))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_I2S_Clock_Source
|
||||
* @{
|
||||
*/
|
||||
#define RCC_I2S2CLKSource_SYSCLK ((uint8_t)0x00)
|
||||
#define RCC_I2S2CLKSource_Ext ((uint8_t)0x01)
|
||||
|
||||
#define IS_RCC_I2SCLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S2CLKSource_SYSCLK) || ((SOURCE) == RCC_I2S2CLKSource_Ext))
|
||||
|
||||
/** @defgroup RCC_LSE_Drive_Configuration
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define RCC_LSEDrive_Low ((uint32_t)0x00000000)
|
||||
#define RCC_LSEDrive_MediumLow RCC_BDCR_LSEDRV_0
|
||||
#define RCC_LSEDrive_MediumHigh RCC_BDCR_LSEDRV_1
|
||||
#define RCC_LSEDrive_High RCC_BDCR_LSEDRV
|
||||
#define IS_RCC_LSE_DRIVE(DRIVE) (((DRIVE) == RCC_LSEDrive_Low) || ((DRIVE) == RCC_LSEDrive_MediumLow) || \
|
||||
((DRIVE) == RCC_LSEDrive_MediumHigh) || ((DRIVE) == RCC_LSEDrive_High))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_AHB_Peripherals
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define RCC_AHBPeriph_ADC34 RCC_AHBENR_ADC34EN
|
||||
#define RCC_AHBPeriph_ADC12 RCC_AHBENR_ADC12EN
|
||||
#define RCC_AHBPeriph_GPIOA RCC_AHBENR_GPIOAEN
|
||||
#define RCC_AHBPeriph_GPIOB RCC_AHBENR_GPIOBEN
|
||||
#define RCC_AHBPeriph_GPIOC RCC_AHBENR_GPIOCEN
|
||||
#define RCC_AHBPeriph_GPIOD RCC_AHBENR_GPIODEN
|
||||
#define RCC_AHBPeriph_GPIOE RCC_AHBENR_GPIOEEN
|
||||
#define RCC_AHBPeriph_GPIOF RCC_AHBENR_GPIOFEN
|
||||
#define RCC_AHBPeriph_TS RCC_AHBENR_TSEN
|
||||
#define RCC_AHBPeriph_CRC RCC_AHBENR_CRCEN
|
||||
#define RCC_AHBPeriph_FLITF RCC_AHBENR_FLITFEN
|
||||
#define RCC_AHBPeriph_SRAM RCC_AHBENR_SRAMEN
|
||||
#define RCC_AHBPeriph_DMA2 RCC_AHBENR_DMA2EN
|
||||
#define RCC_AHBPeriph_DMA1 RCC_AHBENR_DMA1EN
|
||||
|
||||
#define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xCE81FFA8) == 0x00) && ((PERIPH) != 0x00))
|
||||
#define IS_RCC_AHB_RST_PERIPH(PERIPH) ((((PERIPH) & 0xCE81FFFF) == 0x00) && ((PERIPH) != 0x00))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_APB2_Peripherals
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define RCC_APB2Periph_SYSCFG RCC_APB2ENR_SYSCFGEN
|
||||
#define RCC_APB2Periph_TIM1 RCC_APB2ENR_TIM1EN
|
||||
#define RCC_APB2Periph_SPI1 RCC_APB2ENR_SPI1EN
|
||||
#define RCC_APB2Periph_TIM8 RCC_APB2ENR_TIM8EN
|
||||
#define RCC_APB2Periph_USART1 RCC_APB2ENR_USART1EN
|
||||
#define RCC_APB2Periph_TIM15 RCC_APB2ENR_TIM15EN
|
||||
#define RCC_APB2Periph_TIM16 RCC_APB2ENR_TIM16EN
|
||||
#define RCC_APB2Periph_TIM17 RCC_APB2ENR_TIM17EN
|
||||
#define RCC_APB2Periph_HRTIM1 RCC_APB2ENR_HRTIM1
|
||||
|
||||
#define IS_RCC_APB2_PERIPH(PERIPH) ((((PERIPH) & 0xDFF887FE) == 0x00) && ((PERIPH) != 0x00))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_APB1_Peripherals
|
||||
* @{
|
||||
*/
|
||||
#define RCC_APB1Periph_TIM2 RCC_APB1ENR_TIM2EN
|
||||
#define RCC_APB1Periph_TIM3 RCC_APB1ENR_TIM3EN
|
||||
#define RCC_APB1Periph_TIM4 RCC_APB1ENR_TIM4EN
|
||||
#define RCC_APB1Periph_TIM6 RCC_APB1ENR_TIM6EN
|
||||
#define RCC_APB1Periph_TIM7 RCC_APB1ENR_TIM7EN
|
||||
#define RCC_APB1Periph_WWDG RCC_APB1ENR_WWDGEN
|
||||
#define RCC_APB1Periph_SPI2 RCC_APB1ENR_SPI2EN
|
||||
#define RCC_APB1Periph_SPI3 RCC_APB1ENR_SPI3EN
|
||||
#define RCC_APB1Periph_USART2 RCC_APB1ENR_USART2EN
|
||||
#define RCC_APB1Periph_USART3 RCC_APB1ENR_USART3EN
|
||||
#define RCC_APB1Periph_UART4 RCC_APB1ENR_UART4EN
|
||||
#define RCC_APB1Periph_UART5 RCC_APB1ENR_UART5EN
|
||||
#define RCC_APB1Periph_I2C1 RCC_APB1ENR_I2C1EN
|
||||
#define RCC_APB1Periph_I2C2 RCC_APB1ENR_I2C2EN
|
||||
#define RCC_APB1Periph_USB RCC_APB1ENR_USBEN
|
||||
#define RCC_APB1Periph_CAN1 RCC_APB1ENR_CAN1EN
|
||||
#define RCC_APB1Periph_PWR RCC_APB1ENR_PWREN
|
||||
#define RCC_APB1Periph_DAC1 RCC_APB1ENR_DAC1EN
|
||||
#define RCC_APB1Periph_I2C3 RCC_APB1ENR_I2C3EN
|
||||
#define RCC_APB1Periph_DAC2 RCC_APB1ENR_DAC2EN
|
||||
#define RCC_APB1Periph_DAC RCC_APB1Periph_DAC1
|
||||
|
||||
|
||||
#define IS_RCC_APB1_PERIPH(PERIPH) ((((PERIPH) & 0x890137C8) == 0x00) && ((PERIPH) != 0x00))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_MCO_Clock_Source
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define RCC_MCOSource_NoClock ((uint8_t)0x00)
|
||||
#define RCC_MCOSource_LSI ((uint8_t)0x02)
|
||||
#define RCC_MCOSource_LSE ((uint8_t)0x03)
|
||||
#define RCC_MCOSource_SYSCLK ((uint8_t)0x04)
|
||||
#define RCC_MCOSource_HSI ((uint8_t)0x05)
|
||||
#define RCC_MCOSource_HSE ((uint8_t)0x06)
|
||||
#define RCC_MCOSource_PLLCLK_Div2 ((uint8_t)0x07)
|
||||
|
||||
#define IS_RCC_MCO_SOURCE(SOURCE) (((SOURCE) == RCC_MCOSource_NoClock) ||((SOURCE) == RCC_MCOSource_SYSCLK) ||\
|
||||
((SOURCE) == RCC_MCOSource_HSI) || ((SOURCE) == RCC_MCOSource_HSE) || \
|
||||
((SOURCE) == RCC_MCOSource_LSI) || ((SOURCE) == RCC_MCOSource_LSE) || \
|
||||
((SOURCE) == RCC_MCOSource_PLLCLK_Div2))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_MCOPrescaler
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define RCC_MCOPrescaler_1 RCC_CFGR_MCO_PRE_1
|
||||
#define RCC_MCOPrescaler_2 RCC_CFGR_MCO_PRE_2
|
||||
#define RCC_MCOPrescaler_4 RCC_CFGR_MCO_PRE_4
|
||||
#define RCC_MCOPrescaler_8 RCC_CFGR_MCO_PRE_8
|
||||
#define RCC_MCOPrescaler_16 RCC_CFGR_MCO_PRE_16
|
||||
#define RCC_MCOPrescaler_32 RCC_CFGR_MCO_PRE_32
|
||||
#define RCC_MCOPrescaler_64 RCC_CFGR_MCO_PRE_64
|
||||
#define RCC_MCOPrescaler_128 RCC_CFGR_MCO_PRE_128
|
||||
|
||||
#define IS_RCC_MCO_PRESCALER(PRESCALER) (((PRESCALER) == RCC_MCOPrescaler_1) || \
|
||||
((PRESCALER) == RCC_MCOPrescaler_2) || \
|
||||
((PRESCALER) == RCC_MCOPrescaler_4) || \
|
||||
((PRESCALER) == RCC_MCOPrescaler_8) || \
|
||||
((PRESCALER) == RCC_MCOPrescaler_16) || \
|
||||
((PRESCALER) == RCC_MCOPrescaler_32) || \
|
||||
((PRESCALER) == RCC_MCOPrescaler_64) || \
|
||||
((PRESCALER) == RCC_MCOPrescaler_128))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_USB_Device_clock_source
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define RCC_USBCLKSource_PLLCLK_1Div5 ((uint8_t)0x00)
|
||||
#define RCC_USBCLKSource_PLLCLK_Div1 ((uint8_t)0x01)
|
||||
|
||||
#define IS_RCC_USBCLK_SOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSource_PLLCLK_1Div5) || \
|
||||
((SOURCE) == RCC_USBCLKSource_PLLCLK_Div1))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RCC_Flag
|
||||
* @{
|
||||
*/
|
||||
#define RCC_FLAG_HSIRDY ((uint8_t)0x01)
|
||||
#define RCC_FLAG_HSERDY ((uint8_t)0x11)
|
||||
#define RCC_FLAG_PLLRDY ((uint8_t)0x19)
|
||||
#define RCC_FLAG_MCOF ((uint8_t)0x9C)
|
||||
#define RCC_FLAG_LSERDY ((uint8_t)0x21)
|
||||
#define RCC_FLAG_LSIRDY ((uint8_t)0x41)
|
||||
#define RCC_FLAG_OBLRST ((uint8_t)0x59)
|
||||
#define RCC_FLAG_PINRST ((uint8_t)0x5A)
|
||||
#define RCC_FLAG_PORRST ((uint8_t)0x5B)
|
||||
#define RCC_FLAG_SFTRST ((uint8_t)0x5C)
|
||||
#define RCC_FLAG_IWDGRST ((uint8_t)0x5D)
|
||||
#define RCC_FLAG_WWDGRST ((uint8_t)0x5E)
|
||||
#define RCC_FLAG_LPWRRST ((uint8_t)0x5F)
|
||||
|
||||
#define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \
|
||||
((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \
|
||||
((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_OBLRST) || \
|
||||
((FLAG) == RCC_FLAG_PINRST) || ((FLAG) == RCC_FLAG_PORRST) || \
|
||||
((FLAG) == RCC_FLAG_SFTRST) || ((FLAG) == RCC_FLAG_IWDGRST)|| \
|
||||
((FLAG) == RCC_FLAG_WWDGRST)|| ((FLAG) == RCC_FLAG_LPWRRST)|| \
|
||||
((FLAG) == RCC_FLAG_MCOF))
|
||||
|
||||
#define IS_RCC_HSI_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
|
||||
/* Function used to set the RCC clock configuration to the default reset state */
|
||||
void RCC_DeInit(void);
|
||||
|
||||
/* Internal/external clocks, PLL, CSS and MCO configuration functions *********/
|
||||
void RCC_HSEConfig(uint8_t RCC_HSE);
|
||||
ErrorStatus RCC_WaitForHSEStartUp(void);
|
||||
void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue);
|
||||
void RCC_HSICmd(FunctionalState NewState);
|
||||
void RCC_LSEConfig(uint32_t RCC_LSE);
|
||||
void RCC_LSEDriveConfig(uint32_t RCC_LSEDrive);
|
||||
void RCC_LSICmd(FunctionalState NewState);
|
||||
void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul);
|
||||
void RCC_PLLCmd(FunctionalState NewState);
|
||||
void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Div);
|
||||
void RCC_ClockSecuritySystemCmd(FunctionalState NewState);
|
||||
#ifdef STM32F303xC
|
||||
void RCC_MCOConfig(uint8_t RCC_MCOSource);
|
||||
#else
|
||||
void RCC_MCOConfig(uint8_t RCC_MCOSource,uint32_t RCC_MCOPrescaler);
|
||||
#endif /* STM32F303xC */
|
||||
|
||||
/* System, AHB and APB busses clocks configuration functions ******************/
|
||||
void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource);
|
||||
uint8_t RCC_GetSYSCLKSource(void);
|
||||
void RCC_HCLKConfig(uint32_t RCC_SYSCLK);
|
||||
void RCC_PCLK1Config(uint32_t RCC_HCLK);
|
||||
void RCC_PCLK2Config(uint32_t RCC_HCLK);
|
||||
void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks);
|
||||
|
||||
/* Peripheral clocks configuration functions **********************************/
|
||||
void RCC_ADCCLKConfig(uint32_t RCC_PLLCLK);
|
||||
void RCC_I2CCLKConfig(uint32_t RCC_I2CCLK);
|
||||
void RCC_TIMCLKConfig(uint32_t RCC_TIMCLK);
|
||||
void RCC_HRTIM1CLKConfig(uint32_t RCC_HRTIMCLK);
|
||||
void RCC_I2SCLKConfig(uint32_t RCC_I2SCLKSource);
|
||||
void RCC_USARTCLKConfig(uint32_t RCC_USARTCLK);
|
||||
void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource);
|
||||
|
||||
void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource);
|
||||
void RCC_RTCCLKCmd(FunctionalState NewState);
|
||||
void RCC_BackupResetCmd(FunctionalState NewState);
|
||||
|
||||
void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState);
|
||||
void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState);
|
||||
void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState);
|
||||
|
||||
void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState);
|
||||
void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState);
|
||||
void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState);
|
||||
|
||||
/* Interrupts and flags management functions **********************************/
|
||||
void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState);
|
||||
FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG);
|
||||
void RCC_ClearFlag(void);
|
||||
ITStatus RCC_GetITStatus(uint8_t RCC_IT);
|
||||
void RCC_ClearITPendingBit(uint8_t RCC_IT);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F30x_RCC_H */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
Loading…
Add table
Add a link
Reference in a new issue