diff --git a/docs/boards/Board - MERAKRCF405.md b/docs/boards/Board - MERAKRCF405.md
new file mode 100644
index 0000000000..07d2b08ce5
--- /dev/null
+++ b/docs/boards/Board - MERAKRCF405.md	
@@ -0,0 +1,89 @@
+# Board - MERAKRCF405
+
+MERAKRCF405 flight control is carefully optimized layout, so that users can be more concise,convenient wiring,.For ensure a good flight experience ,we use of high-performance MPU6000 gyroscope. After a long flight verification test, the flight control ensures stable flight performance. For details of flight control, please visit MERAK RC website:(http://www.merakrc.com) 
+
+### Hardware
+
+* Processors and Sensors
+  * *MCU: STM32F405RGT6
+  * IMU_1 MPU6000(0 deg)
+  * *OSD:* BetaFlight OSD (AT7456E)
+  * Blackbox: FLASH W25Q128 (16MB)
+
+* 6 Dshot outputs
+
+* 5 UARTs (UART5 support SerialRC)
+
+* Stable voltage regulation,9V/2A DCDC BEC for VTX/camera etc.5V/2A DCDC BEC for FC/WS2812 etc.
+
+* Independent camera control.
+
+### Pinout
+
+### All uarts have pad on board 
+
+| Value | Identifier |  RX  |  TX  |  Notes   |
+| :---: | :--------: | :--: | :--: | :------: |
+|   1   |   USART1   | PA10 | PA9  |          |
+|   2   |   USART2   | PA3  | PA2  |          |
+|   3   |   USART3   | PB11 | PB10 |          |
+|   4   |   USART4   | PC11 | PC10 |          |
+|   5   |   USART5   | PD2  | PC12 | Rx input |
+
+### Buzzer/LED output 
+
+| Value | Identifier | function | pin  | Notes |
+| :---: | :--------: | :------: | :--: | :---: |
+|   1   |    LED0    |   LED    | PC13 |       |
+|   2   |   BEEPER   |   BEEP   | PC14 |       |
+
+### VBAT input, Current input, Analog RSSI input
+
+| Value | Identifier | function | pin  | Notes |
+| :---: | :--------: | :------: | :--: | :---: |
+|   1   |    ADC1    |   VBAT   | PC2  |       |
+|   2   |    ADC1    | CURRENT  | PC1  |       |
+|   3   |    ADC1    | RSSI     | PC3  |       |
+
+### PWM Input & PWM Output & LED strip & Camera control
+
+| Value | Identifier |  function   | pin  | Notes |
+| :---: | :--------: | :---------: | :--: | :---: |
+|   1   |  TIM8_CH3  |     PPM     | PC8  |       |
+|   2   |  TIM3_CH1  |   Motor1    | PC6  |       |
+|   3   |  TIM3_CH2  |   Motor2    | PC7  |       |
+|   4   |  TIM5_CH1  |   Motor3    | PA0  |       |
+|   5   |  TIM5_CH2  |   Motor4    | PA1  |       |
+|   6   |  TIM3_CH3  |   Motor5    | PB0  |       |
+|   7   |  TIM1_CH3N |   Motor6    | PB1  |       |
+|   8   |  TIM4_CH3  |  LED strip  | PB8  |       |
+|   9   |  TIM11_CH1 | CAM Control | PB9  |       |
+
+### Gyro & ACC  MPU6000
+
+| Value | Identifier | function | pin  |     Notes      |
+| :---: | :--------: | :------: | :--: | :------------: |
+|   1   |    SPI2    |   SCK    | PB13  |    MPU6000    |
+|   2   |    SPI2    |   MISO   | PB14  |    MPU6000    |
+|   3   |    SPI2    |   MOSI   | PB15  |    MPU6000    |
+|   4   |    SPI2    |   CS1    | PB12  |  MPU6000_CS   |
+|   5   |     IO     |   INT2   | PC4   |  MPU6000_INT  |
+
+### OSD MAX7456
+
+| Value | Identifier | function | pin  | Notes |
+| :---: | :--------: | :------: | :--: | :---: |
+|   1   |    SPI3    |   SCK    | PB3  |       |
+|   2   |    SPI3    |   MISO   | PB4  |       |
+|   3   |    SPI3    |   MOSI   | PB5  |       |
+|   4   |    SPI3    |    CS    | PA15 |       |
+
+### FLash Blackbox
+
+| Value | Identifier | function | pin  | Notes |
+| :---: | :--------: | :------: | :--: | :---: |
+|   1   |    SPI1    |   SCK    |  PA5 |       |
+|   2   |    SPI1    |   MISO   |  PA6 |       |
+|   3   |    SPI1    |   MOSI   |  PA7 |       |
+|   4   |    SPI1    |    CS    |  PA4 |       |
+
diff --git a/docs/boards/Board - MERAKRCF722.md b/docs/boards/Board - MERAKRCF722.md
new file mode 100644
index 0000000000..18246f3eab
--- /dev/null
+++ b/docs/boards/Board - MERAKRCF722.md	
@@ -0,0 +1,89 @@
+# Board - MERAKRCF405
+
+MERAKRCF405 flight control is carefully optimized layout, so that users can be more concise,convenient wiring,.For ensure a good flight experience ,we use of high-performance MPU6000 gyroscope. After a long flight verification test, the flight control ensures stable flight performance. For details of flight control, please visit MERAK RC website:(http://www.merakrc.com) 
+
+### Hardware
+
+* Processors and Sensors
+  * *MCU: STM32F722RET6
+  * IMU_1 MPU6000(0 deg)
+  * *OSD:* BetaFlight OSD (AT7456E)
+  * Blackbox: FLASH W25Q128 (16MB)
+
+* 6 Dshot outputs
+
+* 5 UARTs (UART5 support SerialRC)
+
+* Stable voltage regulation,9V/2A DCDC BEC for VTX/camera etc.5V/2A DCDC BEC for FC/WS2812 etc.
+
+* Independent camera control.
+
+### Pinout
+
+### All uarts have pad on board 
+
+| Value | Identifier |  RX  |  TX  |  Notes   |
+| :---: | :--------: | :--: | :--: | :------: |
+|   1   |   USART1   | PA10 | PA9  |          |
+|   2   |   USART2   | PA3  | PA2  |          |
+|   3   |   USART3   | PB11 | PB10 |          |
+|   4   |   USART4   | PC11 | PC10 |          |
+|   5   |   USART5   | PD2  | PC12 | Rx input |
+
+### Buzzer/LED output 
+
+| Value | Identifier | function | pin  | Notes |
+| :---: | :--------: | :------: | :--: | :---: |
+|   1   |    LED0    |   LED    | PC13 |       |
+|   2   |   BEEPER   |   BEEP   | PC14 |       |
+
+### VBAT input, Current input, Analog RSSI input
+
+| Value | Identifier | function | pin  | Notes |
+| :---: | :--------: | :------: | :--: | :---: |
+|   1   |    ADC1    |   VBAT   | PC2  |       |
+|   2   |    ADC1    | CURRENT  | PC1  |       |
+|   3   |    ADC1    | RSSI     | PC3  |       |
+
+### PWM Input & PWM Output & LED strip & Camera control
+
+| Value | Identifier |  function   | pin  | Notes |
+| :---: | :--------: | :---------: | :--: | :---: |
+|   1   |  TIM8_CH3  |     PPM     | PC8  |       |
+|   2   |  TIM3_CH1  |   Motor1    | PC6  |       |
+|   3   |  TIM3_CH2  |   Motor2    | PC7  |       |
+|   4   |  TIM5_CH1  |   Motor3    | PA0  |       |
+|   5   |  TIM5_CH2  |   Motor4    | PA1  |       |
+|   6   |  TIM3_CH3  |   Motor5    | PB0  |       |
+|   7   |  TIM1_CH3N |   Motor6    | PB1  |       |
+|   8   |  TIM4_CH3  |  LED strip  | PB8  |       |
+|   9   |  TIM11_CH1 | CAM Control | PB9  |       |
+
+### Gyro & ACC  MPU6000
+
+| Value | Identifier | function | pin  |     Notes      |
+| :---: | :--------: | :------: | :--: | :------------: |
+|   1   |    SPI2    |   SCK    | PB13  |    MPU6000    |
+|   2   |    SPI2    |   MISO   | PB14  |    MPU6000    |
+|   3   |    SPI2    |   MOSI   | PB15  |    MPU6000    |
+|   4   |    SPI2    |   CS1    | PB12  |  MPU6000_CS   |
+|   5   |     IO     |   INT2   | PC4   |  MPU6000_INT  |
+
+### OSD MAX7456
+
+| Value | Identifier | function | pin  | Notes |
+| :---: | :--------: | :------: | :--: | :---: |
+|   1   |    SPI3    |   SCK    | PB3  |       |
+|   2   |    SPI3    |   MISO   | PB4  |       |
+|   3   |    SPI3    |   MOSI   | PB5  |       |
+|   4   |    SPI3    |    CS    | PA15 |       |
+
+### FLash Blackbox
+
+| Value | Identifier | function | pin  | Notes |
+| :---: | :--------: | :------: | :--: | :---: |
+|   1   |    SPI1    |   SCK    |  PA5 |       |
+|   2   |    SPI1    |   MISO   |  PA6 |       |
+|   3   |    SPI1    |   MOSI   |  PA7 |       |
+|   4   |    SPI1    |    CS    |  PA4 |       |
+
diff --git a/src/main/target/MERAKRCF405/target.c b/src/main/target/MERAKRCF405/target.c
new file mode 100644
index 0000000000..a68368fe5c
--- /dev/null
+++ b/src/main/target/MERAKRCF405/target.c
@@ -0,0 +1,47 @@
+/*
+ * This file is part of Cleanflight and Betaflight.
+ *
+ * Cleanflight and Betaflight are free software. You can redistribute
+ * this software and/or modify this software under the terms of the
+ * GNU General Public License as published by the Free Software
+ * Foundation, either version 3 of the License, or (at your option)
+ * any later version.
+ *
+ * Cleanflight and Betaflight are distributed in the hope that they
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+
+#include "platform.h"
+#include "drivers/io.h"
+
+#include "drivers/dma.h"
+#include "drivers/timer.h"
+#include "drivers/timer_def.h"
+
+const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
+    DEF_TIM(TIM8,	CH3,  PC8,  TIM_USE_PPM,		0, 0), // PPM
+
+    // Motors
+    DEF_TIM(TIM3,	CH1,  PC6,  TIM_USE_MOTOR,		0, 0), // M1
+    DEF_TIM(TIM3,	CH2,  PC7,  TIM_USE_MOTOR,		0, 0), // M2
+    DEF_TIM(TIM5, 	CH1,  PA0,  TIM_USE_MOTOR,		0, 0), // M3
+    DEF_TIM(TIM5,	CH2,  PA1,  TIM_USE_MOTOR,		0, 0), // M4
+    DEF_TIM(TIM3,	CH3,  PB0,  TIM_USE_MOTOR,		0, 0), // M5
+    DEF_TIM(TIM1,	CH3N,  PB1,  TIM_USE_MOTOR,		0, 0), // M6
+
+    // LED strip
+    DEF_TIM(TIM4,       CH3,  PB8,  TIM_USE_LED,                0, 0), // LED
+
+    //CAMERA_CONTROL
+    DEF_TIM(TIM11,       CH1,  PB9,  TIM_USE_CAMERA_CONTROL,     0, 0), // CAMERA_CONTROL
+
+};
\ No newline at end of file
diff --git a/src/main/target/MERAKRCF405/target.h b/src/main/target/MERAKRCF405/target.h
new file mode 100644
index 0000000000..354b342ea7
--- /dev/null
+++ b/src/main/target/MERAKRCF405/target.h
@@ -0,0 +1,154 @@
+/*
+ * This file is part of Cleanflight and Betaflight.
+ *
+ * Cleanflight and Betaflight are free software. You can redistribute
+ * this software and/or modify this software under the terms of the
+ * GNU General Public License as published by the Free Software
+ * Foundation, either version 3 of the License, or (at your option)
+ * any later version.
+ *
+ * Cleanflight and Betaflight are distributed in the hope that they
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define TARGET_BOARD_IDENTIFIER "MEF4"
+#define USBD_PRODUCT_STRING     "MERAKRCF405"
+
+#define LED0_PIN                PC13
+
+#define USE_BEEPER
+#define BEEPER_PIN              PC14
+#define BEEPER_INVERTED
+
+// *************** Gyro & ACC **********************
+#define USE_SPI
+#define USE_SPI_DEVICE_2
+
+#define SPI2_SCK_PIN            PB13
+#define SPI2_MISO_PIN           PB14
+#define SPI2_MOSI_PIN           PB15
+
+#define GYRO_1_CS_PIN           PB12
+#define GYRO_1_SPI_INSTANCE     SPI2
+
+#define USE_EXTI
+#define USE_GYRO_EXTI
+#define GYRO_1_EXTI_PIN         PC4
+#define USE_MPU_DATA_READY_SIGNAL
+
+#define USE_GYRO
+#define USE_GYRO_SPI_MPU6000
+#define GYRO_1_ALIGN      CW0_DEG
+
+#define USE_ACC
+#define USE_ACC_SPI_MPU6000
+
+// *************** BLACKBOX **************************
+#define USE_SPI_DEVICE_1
+#define SPI1_SCK_PIN            PA5
+#define SPI1_MISO_PIN           PA6
+#define SPI1_MOSI_PIN           PA7
+
+#define ENABLE_BLACKBOX_LOGGING_ON_SPIFLASH_BY_DEFAULT
+#define USE_FLASHFS
+#define USE_FLASH_M25P16
+#define FLASH_CS_PIN            PA4
+#define FLASH_SPI_INSTANCE      SPI1
+
+// *************** OSD *****************************
+#define USE_SPI_DEVICE_3
+#define SPI3_SCK_PIN            PB3
+#define SPI3_MISO_PIN           PB4
+#define SPI3_MOSI_PIN           PB5
+
+#define USE_MAX7456
+#define MAX7456_SPI_INSTANCE    SPI3
+#define MAX7456_SPI_CS_PIN      PA15
+
+// *************** I2C **************************
+#define USE_I2C
+#define USE_I2C_DEVICE_1
+#define I2C_DEVICE              (I2CDEV_1)
+#define I2C1_SCL                PB6
+#define I2C1_SDA                PB7      
+
+// *************** BARO **************************
+#define USE_BARO
+#define BARO_I2C_INSTANCE       (I2CDEV_1)
+#define USE_BARO_BMP085
+#define USE_BARO_BMP280
+#define USE_BARO_MS5611
+
+// *************** MAG **************************
+#define USE_MAG
+#define MAG_I2C_INSTANCE        (I2CDEV_1) 
+#define USE_MAG_AK8975
+#define USE_MAG_HMC5883
+#define USE_MAG_QMC5883l
+
+// *************** UART *****************************
+#define USE_VCP
+
+#define USE_UART1
+#define UART1_RX_PIN            PA10
+#define UART1_TX_PIN            PA9
+
+#define USE_UART2
+#define UART2_RX_PIN            PA3
+#define UART2_TX_PIN            PA2
+
+#define USE_UART3
+#define UART3_RX_PIN            PB11
+#define UART3_TX_PIN            PB10
+
+#define USE_UART4
+#define UART4_RX_PIN            PC11
+#define UART4_TX_PIN            PC10
+
+#define USE_UART5
+#define UART5_RX_PIN            PD2
+#define UART5_TX_PIN            PC12
+
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       8
+
+#define DEFAULT_RX_FEATURE      FEATURE_RX_SERIAL
+#define SERIALRX_PROVIDER       SERIALRX_SBUS
+
+// *************** ADC *****************************
+#define USE_ADC
+#define ADC_INSTANCE         ADC1
+#define ADC1_DMA_OPT            0 
+
+#define VBAT_ADC_PIN            PC2
+#define CURRENT_METER_ADC_PIN   PC1
+#define RSSI_ADC_PIN            PC3
+
+#define DEFAULT_FEATURES        (FEATURE_OSD | FEATURE_TELEMETRY | FEATURE_SOFTSERIAL)
+#define DEFAULT_VOLTAGE_METER_SOURCE    VOLTAGE_METER_ADC
+#define DEFAULT_CURRENT_METER_SOURCE    CURRENT_METER_ADC
+#define CURRENT_METER_SCALE_DEFAULT 179
+
+#define ENABLE_DSHOT_DMAR       true
+
+#define USE_ESCSERIAL
+#define ESCSERIAL_TIMER_TX_PIN PA3
+
+#define TARGET_IO_PORTA         0xffff
+#define TARGET_IO_PORTB         0xffff
+#define TARGET_IO_PORTC         0xffff
+#define TARGET_IO_PORTD         (BIT(2))
+
+#define USABLE_TIMER_CHANNEL_COUNT 9
+#define USED_TIMERS             (TIM_N(1)|TIM_N(3)|TIM_N(4)|TIM_N(5)|TIM_N(8)|TIM_N(11))
diff --git a/src/main/target/MERAKRCF405/target.mk b/src/main/target/MERAKRCF405/target.mk
new file mode 100644
index 0000000000..6285dcebd7
--- /dev/null
+++ b/src/main/target/MERAKRCF405/target.mk
@@ -0,0 +1,14 @@
+F405_TARGETS   += $(TARGET)
+FEATURES       += VCP ONBOARDFLASH 
+
+TARGET_SRC = \
+            drivers/accgyro/accgyro_mpu.c \
+            drivers/accgyro/accgyro_spi_mpu6000.c \
+            drivers/barometer/barometer_bmp085.c \
+            drivers/barometer/barometer_bmp280.c \
+            drivers/barometer/barometer_ms5611.c \
+            drivers/compass/compass_ak8975.c \
+            drivers/compass/compass_hmc5883l.c \
+            drivers/compass/compass_qmc5883l.c \
+            drivers/compass/compass_lis3mdl.c \
+            drivers/max7456.c
diff --git a/src/main/target/MERAKRCF722/target.c b/src/main/target/MERAKRCF722/target.c
new file mode 100644
index 0000000000..a68368fe5c
--- /dev/null
+++ b/src/main/target/MERAKRCF722/target.c
@@ -0,0 +1,47 @@
+/*
+ * This file is part of Cleanflight and Betaflight.
+ *
+ * Cleanflight and Betaflight are free software. You can redistribute
+ * this software and/or modify this software under the terms of the
+ * GNU General Public License as published by the Free Software
+ * Foundation, either version 3 of the License, or (at your option)
+ * any later version.
+ *
+ * Cleanflight and Betaflight are distributed in the hope that they
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+
+#include "platform.h"
+#include "drivers/io.h"
+
+#include "drivers/dma.h"
+#include "drivers/timer.h"
+#include "drivers/timer_def.h"
+
+const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
+    DEF_TIM(TIM8,	CH3,  PC8,  TIM_USE_PPM,		0, 0), // PPM
+
+    // Motors
+    DEF_TIM(TIM3,	CH1,  PC6,  TIM_USE_MOTOR,		0, 0), // M1
+    DEF_TIM(TIM3,	CH2,  PC7,  TIM_USE_MOTOR,		0, 0), // M2
+    DEF_TIM(TIM5, 	CH1,  PA0,  TIM_USE_MOTOR,		0, 0), // M3
+    DEF_TIM(TIM5,	CH2,  PA1,  TIM_USE_MOTOR,		0, 0), // M4
+    DEF_TIM(TIM3,	CH3,  PB0,  TIM_USE_MOTOR,		0, 0), // M5
+    DEF_TIM(TIM1,	CH3N,  PB1,  TIM_USE_MOTOR,		0, 0), // M6
+
+    // LED strip
+    DEF_TIM(TIM4,       CH3,  PB8,  TIM_USE_LED,                0, 0), // LED
+
+    //CAMERA_CONTROL
+    DEF_TIM(TIM11,       CH1,  PB9,  TIM_USE_CAMERA_CONTROL,     0, 0), // CAMERA_CONTROL
+
+};
\ No newline at end of file
diff --git a/src/main/target/MERAKRCF722/target.h b/src/main/target/MERAKRCF722/target.h
new file mode 100644
index 0000000000..196c447c4c
--- /dev/null
+++ b/src/main/target/MERAKRCF722/target.h
@@ -0,0 +1,154 @@
+/*
+ * This file is part of Cleanflight and Betaflight.
+ *
+ * Cleanflight and Betaflight are free software. You can redistribute
+ * this software and/or modify this software under the terms of the
+ * GNU General Public License as published by the Free Software
+ * Foundation, either version 3 of the License, or (at your option)
+ * any later version.
+ *
+ * Cleanflight and Betaflight are distributed in the hope that they
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define TARGET_BOARD_IDENTIFIER "MEF7"
+#define USBD_PRODUCT_STRING     "MERAKRCF722"
+
+#define LED0_PIN                PC13
+
+#define USE_BEEPER
+#define BEEPER_PIN              PC14
+#define BEEPER_INVERTED
+
+// *************** Gyro & ACC **********************
+#define USE_SPI
+#define USE_SPI_DEVICE_2
+
+#define SPI2_SCK_PIN            PB13
+#define SPI2_MISO_PIN           PB14
+#define SPI2_MOSI_PIN           PB15
+
+#define GYRO_1_CS_PIN           PB12
+#define GYRO_1_SPI_INSTANCE     SPI2
+
+#define USE_EXTI
+#define USE_GYRO_EXTI
+#define GYRO_1_EXTI_PIN         PC4
+#define USE_MPU_DATA_READY_SIGNAL
+
+#define USE_GYRO
+#define USE_GYRO_SPI_MPU6000
+#define GYRO_1_ALIGN      CW0_DEG
+
+#define USE_ACC
+#define USE_ACC_SPI_MPU6000
+
+// *************** BLACKBOX **************************
+#define USE_SPI_DEVICE_1
+#define SPI1_SCK_PIN            PA5
+#define SPI1_MISO_PIN           PA6
+#define SPI1_MOSI_PIN           PA7
+
+#define ENABLE_BLACKBOX_LOGGING_ON_SPIFLASH_BY_DEFAULT
+#define USE_FLASHFS
+#define USE_FLASH_M25P16
+#define FLASH_CS_PIN            PA4
+#define FLASH_SPI_INSTANCE      SPI1
+
+// *************** OSD *****************************
+#define USE_SPI_DEVICE_3
+#define SPI3_SCK_PIN            PB3
+#define SPI3_MISO_PIN           PB4
+#define SPI3_MOSI_PIN           PB5
+
+#define USE_MAX7456
+#define MAX7456_SPI_INSTANCE    SPI3
+#define MAX7456_SPI_CS_PIN      PA15
+
+// *************** I2C **************************
+#define USE_I2C
+#define USE_I2C_DEVICE_1
+#define I2C_DEVICE              (I2CDEV_1)
+#define I2C1_SCL                PB6
+#define I2C1_SDA                PB7      
+
+// *************** BARO **************************
+#define USE_BARO
+#define BARO_I2C_INSTANCE       (I2CDEV_1)
+#define USE_BARO_BMP085
+#define USE_BARO_BMP280
+#define USE_BARO_MS5611
+
+// *************** MAG **************************
+#define USE_MAG
+#define MAG_I2C_INSTANCE        (I2CDEV_1) 
+#define USE_MAG_AK8975
+#define USE_MAG_HMC5883
+#define USE_MAG_QMC5883l
+
+// *************** UART *****************************
+#define USE_VCP
+
+#define USE_UART1
+#define UART1_RX_PIN            PA10
+#define UART1_TX_PIN            PA9
+
+#define USE_UART2
+#define UART2_RX_PIN            PA3
+#define UART2_TX_PIN            PA2
+
+#define USE_UART3
+#define UART3_RX_PIN            PB11
+#define UART3_TX_PIN            PB10
+
+#define USE_UART4
+#define UART4_RX_PIN            PC11
+#define UART4_TX_PIN            PC10
+
+#define USE_UART5
+#define UART5_RX_PIN            PD2
+#define UART5_TX_PIN            PC12
+
+#define USE_SOFTSERIAL1
+#define USE_SOFTSERIAL2
+
+#define SERIAL_PORT_COUNT       8
+
+#define DEFAULT_RX_FEATURE      FEATURE_RX_SERIAL
+#define SERIALRX_PROVIDER       SERIALRX_SBUS
+
+// *************** ADC *****************************
+#define USE_ADC
+#define ADC_INSTANCE         ADC1
+#define ADC1_DMA_OPT            0
+
+#define VBAT_ADC_PIN            PC2
+#define CURRENT_METER_ADC_PIN   PC1
+#define RSSI_ADC_PIN            PC3
+
+#define DEFAULT_FEATURES        (FEATURE_OSD | FEATURE_TELEMETRY | FEATURE_SOFTSERIAL)
+#define DEFAULT_VOLTAGE_METER_SOURCE    VOLTAGE_METER_ADC
+#define DEFAULT_CURRENT_METER_SOURCE    CURRENT_METER_ADC
+#define CURRENT_METER_SCALE_DEFAULT 179
+
+#define ENABLE_DSHOT_DMAR       true
+
+#define USE_ESCSERIAL
+#define ESCSERIAL_TIMER_TX_PIN PA3
+
+#define TARGET_IO_PORTA         0xffff
+#define TARGET_IO_PORTB         0xffff
+#define TARGET_IO_PORTC         0xffff
+#define TARGET_IO_PORTD         (BIT(2))
+
+#define USABLE_TIMER_CHANNEL_COUNT 9
+#define USED_TIMERS             (TIM_N(1)|TIM_N(3)|TIM_N(4)|TIM_N(5)|TIM_N(8)|TIM_N(11))
diff --git a/src/main/target/MERAKRCF722/target.mk b/src/main/target/MERAKRCF722/target.mk
new file mode 100644
index 0000000000..45be63356c
--- /dev/null
+++ b/src/main/target/MERAKRCF722/target.mk
@@ -0,0 +1,14 @@
+F7X2RE_TARGETS += $(TARGET)
+FEATURES       += VCP ONBOARDFLASH 
+
+TARGET_SRC = \
+            drivers/accgyro/accgyro_mpu.c \
+            drivers/accgyro/accgyro_spi_mpu6000.c \
+            drivers/barometer/barometer_bmp085.c \
+            drivers/barometer/barometer_bmp280.c \
+            drivers/barometer/barometer_ms5611.c \
+            drivers/compass/compass_ak8975.c \
+            drivers/compass/compass_hmc5883l.c \
+            drivers/compass/compass_qmc5883l.c \
+            drivers/compass/compass_lis3mdl.c \
+            drivers/max7456.c
diff --git a/unified_targets/configs/MERAKRCF405.config b/unified_targets/configs/MERAKRCF405.config
new file mode 100644
index 0000000000..16ee27609e
--- /dev/null
+++ b/unified_targets/configs/MERAKRCF405.config
@@ -0,0 +1,107 @@
+# Betaflight / STM32F405 (S405) 4.0.4 Jun 30 2019 / 14:58:15 (f3a95efa3) MSP API: 1.41
+
+board_name MERAKRCF405
+manufacturer_id MERA
+
+# resources
+resource BEEPER 1 C14
+resource MOTOR 1 C06
+resource MOTOR 2 C07
+resource MOTOR 3 A00
+resource MOTOR 4 A01
+resource MOTOR 5 B00
+resource MOTOR 6 B01
+resource PPM 1 C08
+resource LED_STRIP 1 B08
+resource SERIAL_TX 1 A09
+resource SERIAL_TX 2 A02
+resource SERIAL_TX 3 B10
+resource SERIAL_TX 4 C10
+resource SERIAL_TX 5 C12
+resource SERIAL_RX 1 A10
+resource SERIAL_RX 2 A03
+resource SERIAL_RX 3 B11
+resource SERIAL_RX 4 C11
+resource SERIAL_RX 5 D02
+resource I2C_SCL 1 B06
+resource I2C_SDA 1 B07
+resource LED 1 C13
+resource SPI_SCK 1 A05
+resource SPI_SCK 2 B13
+resource SPI_SCK 3 B03
+resource SPI_MISO 1 A06
+resource SPI_MISO 2 B14
+resource SPI_MISO 3 B04
+resource SPI_MOSI 1 A07
+resource SPI_MOSI 2 B15
+resource SPI_MOSI 3 B05
+resource ESCSERIAL 1 A03
+resource CAMERA_CONTROL 1 B09
+resource ADC_BATT 1 C02
+resource ADC_RSSI 1 C03
+resource ADC_CURR 1 C01
+resource FLASH_CS 1 A04
+resource OSD_CS 1 A15
+resource GYRO_EXTI 1 C04
+resource GYRO_CS 1 B12
+
+# timer
+timer C08 AF3
+# pin C08: TIM8 CH3 (AF3)
+timer C06 AF2
+# pin C06: TIM3 CH1 (AF2)
+timer C07 AF2
+# pin C07: TIM3 CH2 (AF2)
+timer A00 AF2
+# pin A00: TIM5 CH1 (AF2)
+timer A01 AF2
+# pin A01: TIM5 CH2 (AF2)
+timer B00 AF2
+# pin B00: TIM3 CH3 (AF2)
+timer B01 AF1
+# pin B01: TIM1 CH3N (AF1)
+timer B08 AF2
+# pin B08: TIM4 CH3 (AF2)
+timer B09 AF3
+# pin B09: TIM11 CH1 (AF3)
+
+# dma
+dma ADC 1 0
+# ADC 1: DMA2 Stream 0 Channel 0
+dma pin C08 0
+# pin C08: DMA2 Stream 2 Channel 0
+dma pin C06 0
+# pin C06: DMA1 Stream 4 Channel 5
+dma pin C07 0
+# pin C07: DMA1 Stream 5 Channel 5
+dma pin A00 0
+# pin A00: DMA1 Stream 2 Channel 6
+dma pin A01 0
+# pin A01: DMA1 Stream 4 Channel 6
+dma pin B00 0
+# pin B00: DMA1 Stream 7 Channel 5
+dma pin B01 0
+# pin B01: DMA2 Stream 6 Channel 0
+dma pin B08 0
+# pin B08: DMA1 Stream 7 Channel 2
+
+# master
+set mag_bustype = I2C
+set mag_i2c_device = 1
+set baro_bustype = I2C
+set baro_i2c_device = 1
+set blackbox_device = SPIFLASH
+set dshot_burst = ON
+set current_meter = ADC
+set battery_meter = ADC
+set ibata_scale = 179
+set beeper_inversion = ON
+set beeper_od = OFF
+set system_hse_mhz = 8
+set max7456_spi_bus = 3
+set dashboard_i2c_bus = 1
+set flash_spi_bus = 1
+set gyro_1_bustype = SPI
+set gyro_1_spibus = 2
+set gyro_1_sensor_align = CW0
+set gyro_2_spibus = 2
\ No newline at end of file
diff --git a/unified_targets/configs/MERAKRCF722.config b/unified_targets/configs/MERAKRCF722.config
new file mode 100644
index 0000000000..4fbea8b25b
--- /dev/null
+++ b/unified_targets/configs/MERAKRCF722.config
@@ -0,0 +1,105 @@
+# Betaflight / STM32F7X2 (S7X2) 4.0.4 Jun 30 2019 / 15:00:13 (f3a95efa3) MSP API: 1.41
+
+board_name MERAKRCF722
+manufacturer_id MERA
+
+# resources
+resource BEEPER 1 C14
+resource MOTOR 1 C06
+resource MOTOR 2 C07
+resource MOTOR 3 A00
+resource MOTOR 4 A01
+resource MOTOR 5 B00
+resource MOTOR 6 B01
+resource PPM 1 C08
+resource LED_STRIP 1 B08
+resource SERIAL_TX 1 A09
+resource SERIAL_TX 2 A02
+resource SERIAL_TX 3 B10
+resource SERIAL_TX 4 C10
+resource SERIAL_TX 5 C12
+resource SERIAL_RX 1 A10
+resource SERIAL_RX 2 A03
+resource SERIAL_RX 3 B11
+resource SERIAL_RX 4 C11
+resource SERIAL_RX 5 D02
+resource I2C_SCL 1 B06
+resource I2C_SDA 1 B07
+resource LED 1 C13
+resource SPI_SCK 1 A05
+resource SPI_SCK 2 B13
+resource SPI_SCK 3 B03
+resource SPI_MISO 1 A06
+resource SPI_MISO 2 B14
+resource SPI_MISO 3 B04
+resource SPI_MOSI 1 A07
+resource SPI_MOSI 2 B15
+resource SPI_MOSI 3 B05
+resource CAMERA_CONTROL 1 B09
+resource ADC_BATT 1 C02
+resource ADC_RSSI 1 C03
+resource ADC_CURR 1 C01
+resource FLASH_CS 1 A04
+resource OSD_CS 1 A15
+resource GYRO_EXTI 1 C04
+resource GYRO_CS 1 B12
+
+# timer
+timer C08 AF3
+# pin C08: TIM8 CH3 (AF3)
+timer C06 AF2
+# pin C06: TIM3 CH1 (AF2)
+timer C07 AF2
+# pin C07: TIM3 CH2 (AF2)
+timer A00 AF2
+# pin A00: TIM5 CH1 (AF2)
+timer A01 AF2
+# pin A01: TIM5 CH2 (AF2)
+timer B00 AF2
+# pin B00: TIM3 CH3 (AF2)
+timer B01 AF1
+# pin B01: TIM1 CH3N (AF1)
+timer B08 AF2
+# pin B08: TIM4 CH3 (AF2)
+timer B09 AF3
+# pin B09: TIM11 CH1 (AF3)
+
+# dma
+dma ADC 1 0
+# ADC 1: DMA2 Stream 0 Channel 0
+dma pin C08 0
+# pin C08: DMA2 Stream 2 Channel 0
+dma pin C06 0
+# pin C06: DMA1 Stream 4 Channel 5
+dma pin C07 0
+# pin C07: DMA1 Stream 5 Channel 5
+dma pin A00 0
+# pin A00: DMA1 Stream 2 Channel 6
+dma pin A01 0
+# pin A01: DMA1 Stream 4 Channel 6
+dma pin B00 0
+# pin B00: DMA1 Stream 7 Channel 5
+dma pin B01 0
+# pin B01: DMA2 Stream 6 Channel 0
+dma pin B08 0
+# pin B08: DMA1 Stream 7 Channel 2
+
+# master
+set mag_bustype = I2C
+set mag_i2c_device = 1
+set baro_bustype = I2C
+set baro_i2c_device = 1
+set blackbox_device = SPIFLASH
+set dshot_burst = ON
+set current_meter = ADC
+set battery_meter = ADC
+set ibata_scale = 179
+set beeper_inversion = ON
+set beeper_od = OFF
+set max7456_spi_bus = 3
+set dashboard_i2c_bus = 1
+set flash_spi_bus = 1
+set gyro_1_bustype = SPI
+set gyro_1_spibus = 2
+set gyro_1_sensor_align = CW0
+set gyro_2_spibus = 2
\ No newline at end of file