mirror of
https://github.com/betaflight/betaflight.git
synced 2025-07-24 08:45:36 +03:00
CF - restore docs folder from master_v1.x
This commit is contained in:
parent
6a869f05f6
commit
f9f41530bf
143 changed files with 9321 additions and 0 deletions
29
docs/Safety.md
Normal file
29
docs/Safety.md
Normal file
|
@ -0,0 +1,29 @@
|
|||
# Safety
|
||||
|
||||
As many can attest, multirotors and RC models in general can be very dangerous, particularly on the test bench. Here are some simple golden rules to save you a trip to the local ER:
|
||||
* **NEVER** arm your model with propellers fitted unless you intend to fly!
|
||||
* **Always** remove your propellers if you are setting up for the first time, flashing firmware, or if in any doubt.
|
||||
|
||||
## Before Installing
|
||||
|
||||
Please consult the [Cli](Cli.md), [Controls](Controls.md), [Failsafe](Failsafe.md) and [Modes](Modes.md)
|
||||
pages for further important information.
|
||||
|
||||
You are highly advised to use the Receiver tab in the CleanFlight Configurator, making sure your Rx channel
|
||||
values are centered at 1500 (1520 for Futaba RC) with minimum & maximums of 1000 and 2000 (respectively)
|
||||
are reached when controls are operated. Failure to configure these ranges properly can create
|
||||
problems, such as inability to arm (because you can't reach the endpoints) or immediate activation of
|
||||
[failsafe](Failsafe.md).
|
||||
|
||||
You may have to adjust your channel endpoints and trims/sub-trims on your RC transmitter to achieve the
|
||||
expected range of 1000 to 2000.
|
||||
|
||||
The referenced values for each channel have marked impact on the operation of the flight controller and the
|
||||
different flight modes.
|
||||
|
||||
## Props Spinning When Armed
|
||||
With the default configuration, when the controller is armed, the propellers *WILL* begin spinning at low speed.
|
||||
We recommend keeping this setting as it provides a good visual indication the craft is armed.
|
||||
|
||||
If you wish to change this behavior, see the MOTOR_STOP feature in the Configurator and relevant documentation pages.
|
||||
Enabling this feature will stop the props from spinning when armed.
|
Loading…
Add table
Add a link
Reference in a new issue