PLL-HSE working
PLL-HSI working
Move SystemCoreClockUpdate in SystemInit to end
Switching from HSI-PLL to HSE-PLL (and back) is working
It works during various levels of overclocking.
Renamed CLI variable hse_mhz to system_hse_mhz
Restored the original position of the spectrum bind code
The internal logic of the spectrum bind code will prevent binding
process to fire if executed after soft reset.
Remove stale call to delay
Add a comment about call to spektrumBind placement
Declared SystemXXXSource functions, handled sign-ness warning.
Cleaned up commented out sections
USB clock generation for F446
Default HSE value for backward compatibility
Cleaned up more unused stuff
Handle non-F4 targets
Added comment about PLL_M selection
Removed fake gyro/acc from test target
MCO2 output as run time configurable option
Add sanity check for MCO2 pin
changed output mode to AF from OUTPUT in mco driver
MCO for F4 is not implemented yet
Reinstate original OMNIBUSF7 target.h
Add config variable mco2_on_pc9
Make MCO2 pin hardcoded with mco2_on_pin control variable
fixed mco2 clock config corruption
removed unused pin definitions
Previously the logic would process all possible ranges defined by MAX_ADJUSTMENT_RANGE_COUNT even if some (or even all) ranges were not configured. This change first builds a list of configured ranges and only processes thos entries.
Reduces CPU load by skipping unnecessary processing and minimizes the impact of increasing the number of available ranges.
- Move conditionals from pg/usb.c to common_defaults_post.h
- Add detectPin to usbDev_s.
- Bump PG version for usbDev_s.
- Add resource manipulation for USB_DETECT.
Validates the index for lookup values to prevent referencing random memory. Also validates the range of numeric parameters.
diff output will clearly show any corrupted parameters.
This allows modes to be linked, for example to link vtx pit mode to paralyze. Whenever paralyze is activated, vtx pit mode is activated as well. Also the logic to prevent mode changes when enabling paralyze can be removed in favor of making paralyze sticky.
Modes can be linked in CLI by providing the mode id as the last parameter of the aux command. For example in order to link vtx pit mode to paralyze, replace the last 0 of the pit mode aux (39) with the mode id of paralyze (45):
```
aux 2 39 2 1700 2100 0 0
```
becomes
```
aux 2 39 2 1700 2100 0 45
```
_Legal disclaimer: I am making my contributions/submissions to this project solely in my personal capacity and am not conveying any rights to any intellectual property of any third parties._
