added (untested) support for additional PWM output channels incase of PPM input - 4 more, so total of 10 outputs in this mode.
added (mostly untested) support for throttle calibration - short out PPM input connector with a bind plug and power up.
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@122 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
implemented battery cell count auto detect (DJI, you can steal this source from me for your next product). automatically finds 2S..6S battery, and sets warning voltage accordingly
added new battery config -related stuff in cli, min/max cell voltage for non-lipo users. Defaults for lipo are 4.3V/cell (max) and 3.3V/cell (min).
added pid setting stuff into cli from nicodh
added 'status' command to cli to print out system info.
added build date/time to 'version' in cli, to track down stupid users.
config version bumped, settings are cleared again.
refactored battery voltage stuff a bit, and got rid of 3 levels of warnings. don't see any benefit at all.
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@121 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
changed gyro/acc to allow different drivers without recompile, this allowed adding mpu6050 support w/autodetect
moved sensor orientation code into driver - each driver provides its own
added support for mpu6050 - desolder mpu3050 and adxl345, replace with mpu6050 for instant ???
merged multiwii 2.0pre3 code changes (none that mattered except mag calibration and typo in baro stuff)
changes to sensor autodetect for new dynamic drivers
more of ledring stuff done (still doesn't work, so dont try)
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@115 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
implemented cli (press # in serial to enter it). no commands except exit/version yet.
added uartPrint
fixed bug in task switching with missing breaks - was failing baro and perhaps mag readings
dynamic yaw direction, camtilt feature, camtrig feature.
ported some of 2.0-pre1 features:
* gyro smoothing
* baro/althold cleanup
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@102 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
switched nop to __NOP from cm3 headers
got rid of __GNUC__ DMB stuff as well, since its all properly defined in cm3 headers
added mpu lowpass filter config and defaulted to 42hz. seems to fly smoother.
features are in eeprom, removed default setting from main.c
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@98 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
moved around features/sensors setting stuff into config instead of drv_system
saving features to eeprom now to avoid stupid
added gcc crap for __nop and __dmb
added digital servo feature to pwm driver, used for tri or whatever
added just plain reboot option in addition to reboot to bootloader
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@93 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
