1
0
Fork 0
mirror of https://github.com/betaflight/betaflight.git synced 2025-07-23 16:25:31 +03:00
Commit graph

6 commits

Author SHA1 Message Date
dominicc1974@gmail.com
4c191270bf Changing all line endings to WINDOWS line endings (CR+LF) and removing all End-Of-Line whitespace and using spaces instead of tabs. Please ensure you configure your editors and tools to follow suit. If using git please enable autocrlf in your .git/config file.
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@393 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-09-06 23:14:48 +00:00
timecop@gmail.com
005308b430 Applied patch from trunet for running at 64MHz off HSI for broken Chinese kcopter clones
status in cli now prints cpu MHz, 72 when running off crystal, 64 when running off intrc.
corrected WHO_AM_I check for mpu6050 when it's used on alternate address (AD0 high).
corrected PWM driver to consider CPU clock for timer prescalers - now things properly work below 72MHz
added a neat hack for pitch angle calculation so that it's not affected when roll reaches 90deg
added proper math for vector rotation instead of small-angle approximation

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@225 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-10-06 14:40:24 +00:00
timecop
c98113b82c synced with mwc 2.1. it's suprising how many "new" things in 2.1 didn't actually matter on a real platform.
removed camtrig stuff since it wasnt possible. somewhat replaced with aux forwarding (see below)
2.1 buzzer code changed, untested.
removed flying wing mixer. nobody used that. 
added alt_hold_throttle_neutral, nav_slew_rate and looptime configuration to cli. default looptime set to 3000. changed default gyro_cmpf to 400 to sync with 2.1.
increased bmp085 oversampling
added gimbal_flags (bit 4 set) flag which, in PPM mode, forwards AUX1..4 to the lower 4 PWM outputs instead of using them as motors. set gimbal_flags=8 to test it out. output is fixed to 50Hz.
merged 2.1 gps changes (not many)
casting in gyro smoothing (nobody uses that anyway)
calibrate accel in gimbal mode, set smallangle in gyro-only mode
vtail4 mixer fix
flight tested on quadx w/ppm.


git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@182 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-07-20 14:53:15 +00:00
timecop
9c2204c179 synced serial protocol to multiwii-dev 20120622
changed booleans to bitfield struct to match with 0622
no other functional changes, and not all enhancements (like boxlight) from 0622 are implemented yet
NOT flight tested, use at your own risk.

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@172 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-06-30 13:20:53 +00:00
timecop
18db641282 readded support for failsafe (thanks rimshotcopter for bugging me about it for a month)
new config ooptions for failsafe, so current settings are cleared
fixed mistake where yaw servo stuff for tri was still hardcoded even though it had configurable values in cli
reduced level default D to 20 from 100 (dunno what effect this has, shrug)
untested, enable feature FAILSAFE at your own risk.

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@155 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-05-09 05:29:30 +00:00
timecop
0d7460960e merged changes from multiwii_dev 20120504. this means new serial protocol, new buzzer code
fixed spacing in ledring.c
defaulted acc_lpf to 100
correction in vtail4 mix (from multiwii_dev)
trashed more unused LOG_VALUES crap
no binary build since this is untested / non-flight-tested.

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@152 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-05-05 12:47:52 +00:00