blckmn
2dca6a5bbc
Preparation for F4 being LL enabled.
...
Updated F7 to use latest HAL / LL libraries
2017-07-29 23:02:39 +10:00
Martin Budden
0118af7eb3
Blackbox header and function name tidy
2017-07-29 13:33:19 +01:00
Martin Budden
944fe0761c
Tidied UART enum definitions
2017-07-29 13:30:37 +01:00
Martin Budden
471e01210b
Merge pull request #3621 from DieHertz/dataflash-read-compressed
...
Compression for MSP_DATAFLASH_READ
2017-07-29 13:18:29 +01:00
J Blackman
bacc6e6fb1
Merge pull request #3658 from blckmn/boardIdent_fix
...
Fix for reset on save
2017-07-29 08:11:33 -03:00
blckmn
3846dd5cf6
Fix for reset on save
2017-07-29 20:59:13 +10:00
Martin Budden
03caa1cc8d
Merge pull request #3600 from blckmn/boardIdentifier
...
Board identifier being moved to systemConfig
2017-07-29 06:47:00 +01:00
Vidalcris
69f4008944
Crash Recovery Delay - Against false positive. ( #3640 )
...
Delay detection setting - crash_delay added.
2017-07-29 06:37:02 +01:00
borisbstyle
402de03bd4
Fix F3 check
2017-07-28 10:21:14 +02:00
borisbstyle
d14f411d7a
Merge pull request #3649 from betaflight/denoise_filter
...
Free up some RAM on F1 and F3 // removal of denoise buffer
2017-07-28 10:19:01 +02:00
borisbstyle
6876ed20b7
Free up some RAM on F1 and F3 // removal of denoise buffer
2017-07-28 10:15:40 +02:00
jflyper
a2709afbd0
Avoid TIM1 conflict on PPM(LED) and MOTOR 3
...
MOTOR 3 (PB14) : TIM1_CH2N -> TIM8_CH2N
MOTOR 2 (PC7) : TIM8_CH2N -> TIM3_CH2 D(1,5,5) = DMA safe
TIM3 is also used by MOTOR 4, so this change is timer safe (at least
for quads).
2017-07-28 12:29:35 +09:00
Martin Budden
4e845576af
Merge pull request #3645 from blckmn/ll_driver
...
IO Clean up and use of Low level for F7
2017-07-28 03:56:18 +01:00
Martin Budden
bc5d420d25
Merge pull request #3647 from jflyper/bfdev-omnibusf4-remove-temporary-mod
...
OMNIBUSF4 Remove temporary mod installed for debugging
2017-07-28 03:52:49 +01:00
jflyper
bdcbb8ccfe
Remove temporary mod from OMNIBUSF4 target
2017-07-28 10:48:38 +09:00
blckmn
c1af6cf96b
Removed as per @ledvinap suggestion
2017-07-28 06:28:57 +10:00
Bas Delfos
0de75322d0
Changes MSP command numbers to be consistent with other MSP commands
2017-07-27 21:10:22 +02:00
Bas Delfos
47c95f9a6d
Add MSP_BEEPER_CONFIG and MSP_SET_BEEPER_CONFIG for beeper configuration
2017-07-27 20:57:17 +02:00
blckmn
e8c4ef83d9
IO Clean up and use of Low level for F7
...
- Move F7 to optional LL driver for IO and
- cleaned up and removed the remaining old gpio functions from other targets
2017-07-28 04:03:56 +10:00
Andrey Mironov
9556d1c84d
Added CAMERA_CONTROL_PIN for target-specific configuration
2017-07-27 16:42:25 +03:00
DieHertz
b0cc2b670d
Implemented streaming Huffman compression in chunks of 256 bytes
2017-07-27 16:04:38 +03:00
Martin Budden
213d9d976d
Use Huffman compression for blackbox data transfer
...
Conflicts:
src/test/Makefile
2017-07-27 16:04:37 +03:00
Martin Budden
43a84175e9
Merge pull request #3639 from martinbudden/bf_pid_tidy3
...
Tidy of pid code
2017-07-27 13:09:31 +01:00
Martin Budden
c1f74c9aed
Tidy of pid code
2017-07-27 09:57:02 +01:00
Martin Budden
c5ed9d5669
Merge pull request #3633 from cs8425/bf-SITL-EEPROM-in-RAM
...
Use variable for eeprom emulation in SITL
2017-07-27 09:06:38 +01:00
Martin Budden
6cb4f186d5
Merge pull request #3632 from jflyper/bfdev-omnibusf7-add-uart2rx
...
OMNIBUSF7 Assign UART2_RX to designated RC(SBUS/PPM) pin
2017-07-27 09:04:57 +01:00
jflyper
323b283b6c
Assign unused timer for esc serial tx timer
2017-07-27 16:24:42 +09:00
borisbstyle
98ea46e36b
Merge pull request #3638 from DieHertz/camera-control-fix-hardware-pwm
...
[Camera Control] Fixed Hardware PWM
2017-07-27 08:54:42 +02:00
Andrey Mironov
3f74aa7dc7
Changed name from MHZ to HZ
...
Brought name in correspondence with units of measurement
2017-07-27 09:45:19 +03:00
DieHertz
897cdc8346
Fixed refactoring-induced error in camera_control.c
2017-07-27 03:06:24 +03:00
jflyper
e2262d8828
Merge pull request #3637 from jflyper/bfdev-fix-i2c-pin-for-revo
...
REVO Fix I2C pin name typo
2017-07-27 08:04:54 +09:00
jflyper
46eec72969
Fix I2C pin for REVO
2017-07-27 08:03:26 +09:00
Petr Ledvina
8d37ae885f
Use variable for eeprom emulation
...
Linker section is not necessary
2017-07-27 02:12:23 +08:00
jflyper
a40fb10c3e
OMNIBUSF7 Assign UART2_RX to designated RC(SBUS/PPM) pin
...
Also define software serials, add backdoor timers and hmc5883 mag.
2017-07-27 00:44:00 +09:00
Dan Nixon
28fb930c1f
Improve formatting of some numerical OSD elements
...
- Moved units to the right of the number
- Added adequate left padding
2017-07-26 12:57:12 +01:00
Dan Nixon
ad334113e2
Add test for existing OSD element functionality
2017-07-26 12:34:06 +01:00
Martin Budden
33ac88b88d
Merge pull request #3624 from jflyper/bfdev-revo-resurrect-i2c-baro-mag
...
REVO Resurrect I2C, baro and mag
2017-07-26 07:16:16 +01:00
Martin Budden
b3270111a9
Merge pull request #3627 from fishpepper/openocd
...
adding openocd-gdb command to makefile
2017-07-26 06:29:26 +01:00
jflyper
34c2c35f31
Touch-ups
2017-07-26 07:49:21 +09:00
fishpepper
b57c3ea5d8
adding openocd-gdb command to makefile
2017-07-25 23:24:16 +02:00
jflyper
3ca9e3d3ae
REVO Resurrect I2C, baro and mag
2017-07-26 03:10:43 +09:00
Martin Budden
b13f96d29b
Merge pull request #3620 from basdelfos/fix-currentmeter-esc-motor-4-missing
...
Fixed missing ESC motor 4 on Amperage meter part
2017-07-25 06:54:10 +01:00
Martin Budden
851e1f6594
Merge pull request #3622 from mikeller/added_matekf722_board
...
Added MATEKF722 board definition.
2017-07-25 06:52:16 +01:00
Martin Budden
7272896c96
Merge pull request #3623 from brucesdad13/target-alienwhoop
...
Add LED_STRIP support and minor cleanup
2017-07-25 06:51:23 +01:00
Charles K Stevenson
5a1c6d193e
Merge branch 'master' into target-alienwhoop
2017-07-25 00:01:23 -04:00
brucesdad13@gmail.com
246177b363
* Added LED_STRIP support (timer and define) ~ Thanks @jflyper for the help!
...
* Removed old defines from prototyping phase and minor cleanup
~ Charlie Stevenson
2017-07-24 23:02:34 -04:00
Michael Keller
66f4880198
Added MATEKF722 board definition.
2017-07-25 10:49:34 +08:00
blckmn
7a5d1d9b8e
Moving boardIdentifier out of config header and into systemConfig (for generic targets)
2017-07-25 09:05:12 +10:00
jflyper
46532de91e
Merge pull request #3548 from maverikou/kiwif4v2-fix-motor-led-conflict
...
KIWIF4V2/PLUMF4 - Fix motor/led timer conflict.
2017-07-25 07:28:40 +09:00
J Blackman
da46ef68a9
Adding Debug pin to output list ( #3618 )
...
* Adding Debug pin to output list
* Updated usable timer channel count
2017-07-24 17:56:14 -03:00
