F405 working (OMNIBUSF4SD target)
F411 not tested
F722 working, needs testing (OMNINXT7 target)
F74x not working
NOX target (temporary)
bb_dshot with telemetry on f4
bbshot f7 targets and fix crash due to missing debug pins
remove empty line
add empty lines
remove OMNIBUSF4 specific debug pins
add missing comma
add missing comma
Use separate bbTimerHardware array to fix unified targets
eliminate now unneeded timerGetByUsage
don't duplicate timer1 def
Add auto mode, rename dshot_bbshot to dshot_bitbang
remove newline
renamve various files
various changes to address feedback
address feedback
address feedback
add pacer timers to timer show
don't disable telemetry if dshot_bitbang is on or auto
Address feedback, add faster decode implementation based on bit banding, modify dma parameters to reduce required memory bandwidth on half
remove debug output
remove NOINLINE
Protect gpio direction change with critical sections
FIXWS_SAVE_INDEX
add static back in
no forward typedef
address review feedback
disallow proshot1000 with dshot bitbang
Extracted and plumbed up 'dbgPin'.
It turns out that two calls to micros() and the calculation of
directionChangeDurationUs took 581 cycles, vs 396 cycles without the
calls to micros() and deferred calculation of the duration which is only
needed in the CLI.
This brings the time down from around 7 microseconds to 5.5 microseconds
on an F3 at 72Mhz.
This makes the difference between 100% invalid telemetry and 4% invalid
telemetry on the first motor on the F3.
Squashed commits:
* Remove the forward declaration for `pwmDshotSetDirectionInput` and make
it static.
* Remove unneeded forward declaration of `motor_DMA_IRQHandler`.
* Remove duplication in DMA IRQ Handler.
Doesn't affect resulting code but improves readability.
* Use an inline function to read DWT->CYCCNT.
* Remove unneeded forward declarations from cli.c now that the correct
header is included.
* Update DWT unlock method.
all pins are initialized to pullup inputs per default. With resource PULLDOWN 1 PIN it is
possible to reconfigure the pin so it is a PULLDOWN input.
With this it's possible to prevent certain errors on some boards that have multiple pins connected
with an inverter and the pullup flows back via the inverter and pulls other pins low (see #7849)
Reduce code by supporting only GCR, fix serial_4way, fix f7 dshot bidir
fix ws and eliminate superfluous buffer
use GCR constant instead of 32
decode optimization
bump 4way prot version mumber
bump if version
Fix compilation when USE_DMA and USE_DMA_SPEC are not defined.
Cleanup calling code of `isMotorProtocolDshot`.
Fix 'unused' warning when USE_PWM_OUTPUT is not defined.
Undo isMotoroProtocolDshot change.
Disable USE_SERIAL_4WAY_BLHELI_INTERFACE when USE_PWM_OUTPUT is not
enabled.
Style cleanup.
Moved vtxtable frequency mode implementation into `vtx_common.c`.
This makes the implementation available for all vtx types and allows
for some code deduplication (see point below)
Removed band and channel tracking from tramp and rtc6705.
The hardware underlying both only support frequency mode and
the tracking is now done in `vtx_common.c` using the new factory flag.
Deleted vtxStringXXX. to continue supporting builds without
`USE_VTX_TABLE`, new infrastructure was created in
`drivers/vtx_table.c`, which loads fixed tables into vtxTableXXX
when built witout `USE_VTX_TABLE`. Individual vtx implementations no
longer need to load any band/channel tables. They only need to load
their individual power tables when built without `USE_VTX_TABLE`.
Additionally this allows for the next point:
Fully integrated vtxTableXXX and removed the old and no longer needed
indirection of frequency and power tables in `vtxDevice_t`.
Removed VTX_SETTINGS_* constants from `vtx_common.h` and replaced them
with the vtxtable equivalent.
rtc6705 implementation now uses power values from vtxtable instead of
using indices directly. It also stops using index 0. This makes it
consistent with other vtx implementations and is more user configurable.
It also cleans up `telemetry\srxl.c` which had to have a special case for rtc6705.
Finally, frequency entries in the vtxtable can now be marked as empty
by setting their frequency to 0. Betaflight will never allow a blocked
channel to be selected. This is useful for vtxtable index mode
(FACTORY flag set) where manufacturer-defined bands can be truncated
to ensure compliance with local laws and regulations.
