* Add support for W25N02K 2Gbit/256Mbyte FLASH
* Remove duplicate defintion check
* Rename W25N01G_BB_*_BLOCK macros
* Remove debug
* Create unified driver for W25N01G and W25N02K devices
* Put device parameters in a table
* Add W25N01GV to stacked die driver
* Do not enable features by default
* Enable OSD by default if included
* Enable OSD by default if included 2
* Fixes per review blckmn
* Add gate
* Only enable defined features
* No need for DEFAULT_FEATURES predefine
* No need for gating as we use featuresSupportedByBuild
* Fixes per review from ledvinap
* Features - refactor featureNames[]
Use designated initializers for used features. NULL values are stored
in gaps.
Use ARRAYLEN() for featureNames iteration
Use `unsigned` for bitmasks
* Features - add featuresSupportedByBuild
bitmask of features that are supported in current build
configuration. Copied from init.c sanitization
* Features - simplify feature sanitization code
featuresSupportedByBuild makes things much easier
* Features - improve cli feature handling
- refuse all features that are not compiled in
- AlreadyDisabled/AlreadyEnabled info
- refuse operation if multiple features match
* fixup! Features - improve cli feature handling
* Features - print available and not supported features separately
* Update src/main/cli/cli.c
Co-authored-by: Mark Haslinghuis <mark@numloq.nl>
* features - print full state without command
---------
Co-authored-by: Petr Ledvina <ledvinap@hp124.ekotip.cz>
Co-authored-by: Mark Haslinghuis <mark@numloq.nl>
* Beeper - improve/fix beeper sequencing
- beeperSequenceAdvance is used to advance beeperPos
- sequences starting with 0 (delay first) are handled correctly
- 'empty' beeper states are supressed
- leds do blink beeper sequence, even when beeper is silenced
* Beeper - refactor beep_multiBeeps
- simpler length definition
- helpper function to simplify beep generation
* Beeper - refactor beeperTable
Refuse modes where beeperTableEntry->sequence is NULL
Rest of code is refactored without functional changes
* Beeper - improve micros() overflow handling + minor refactoring
- beeperNextToggleTime==0 when not enabled
- lastDshotBeaconCommandTimeUs is updated during DSHOT_BEACON_GUARD_DELAY_US phase
- DSHOT_BEACON_ALLOWED_MODES instead of explicit tests
* Beeper - minor refactor
- improve comments
- add STATIC_ASSERT
- reformat some code
- move #ifdef to better follow semantic structure
- return unsigned from BEEPER_GET_FLAG
* fixup! Beeper - minor refactor
---------
Co-authored-by: Petr Ledvina <ledvinap@hp124.ekotip.cz>
Update gps.c
Added calculateNavInterval() function call into MSP GPS logic. Needed to update gpsSol.navIntervalMs so velocity to home can get calculated.
* Add LED functions: Battery Bar, GPS Bar
Battery Bar:
Indicates the battery percentage with a loading bar style
GPS Bar:
Indicates the amount of locked GPS satellites with a loading bar style
* LED altitude function
Adds a new function: LED altitude.
Sets the LED color based on the altitude, measured from the initialized position.
* set led color to background if value decreases
Even if the gps satellite count decreases at a later point in time, the LEDs update correctly now.
It is the same for the battery level function.
LEDs color changes more strongly now when based on altitude.
* Added proper ifdefs for GPS and Barometer
* fixed unittest and use estimate altitute
- fixed unittest
- cleaner indentation
- the altitude function now uses the estimate function instead of the raw value (gps+barometer)
* counters in struct, gps bar color gradient
- Counters for the led bar are now handled in a structure.
- Moved the led bar code to a seperate function that is only called when the led config changes.
- improved usefulness of the gps led bar with less than 4 leds installed by adding a color gradient.
* Update src/main/io/ledstrip.c
Co-authored-by: Petr Ledvina <ledvinap@gmail.com>
* Update src/main/io/ledstrip.c
Co-authored-by: Petr Ledvina <ledvinap@gmail.com>
* Update src/main/io/ledstrip.c
Co-authored-by: Petr Ledvina <ledvinap@gmail.com>
* Update src/main/io/ledstrip.h
Co-authored-by: Petr Ledvina <ledvinap@gmail.com>
* Update src/main/io/ledstrip.c
Co-authored-by: Petr Ledvina <ledvinap@gmail.com>
* one min led for very low battery, use failsafe sats to interpolate
- at least one led is lit up for the battery/gps bar at all time (to show color gradient, also making the function more useful when only applying it to 1 led).
- gps bar now takes the failsafe min sats (or default 8) to interpolate between red and green.
- rewrote the led codes to be less fragile
- some structural changes that also adress comments on the pull request
* fix code if no gps rescue is used
fixes code if no gps rescue is used.
sets the default min sats to 8.
* Update src/main/io/ledstrip.c
Co-authored-by: Petr Ledvina <ledvinap@gmail.com>
* Fixes per review ledvinap
* Fixes per review Ledvinap 2
* Update src/main/io/ledstrip.c
* Update src/main/io/ledstrip.c
---------
Co-authored-by: jonas-becker <jonas@Thinkpad>
Co-authored-by: Petr Ledvina <ledvinap@gmail.com>
Co-authored-by: Mark Haslinghuis <mark@numloq.nl>
* battery - fix BATTERY_NOT_PRESENT detection, detection logic change
Detection logic is refactored - battery voltage delta is tested each
50ms, voltage is considered stable when difference of last 10 samples
is smaller than 100mV
This makes stable threshold more forgiving than #13350 (time for
comparison is 50 instead of 500ms).
* battery - improve stable voltage detection
- voltageStablePrevFiltered every time delta is exceeded
- voltage within range is ANDed over 100ms periods
- voltage is stable if it was within range for 10 out of 11 periods
- slowly changing voltage will update threshold, but voltage will be
considered stable
- 1 update/s (100mV/s) is tolerated
* battery - fuix typos, improve comments
* Fix smartport over softserial
* Constrain baudrateIndex does not work
* Reapply 57600 for SmartPort
* Use custom define for baudrate override
* Return when baudrate requested is above set limit of softserial
* Thanks ledvinap
* Fix macro name
* Cloud Build API does not allow define size > 32
Remove functionality to enter flash bootloader by sending 'F' on a UART
configured for MSP.
* The proper way to reboot to the boot loader is by sending an
MSP_REBOOT command.
* RX - minor optimizations/minor cleanup
- reuse millis() in rxInit
- rcData[] is float
- cleanup some float math
- fix GET_FRAME_ERR_LPF_FREQUENCY macro argument
* Update src/main/pg/rx.h
Co-authored-by: Jan Post <Rm2k-Freak@web.de>
---------
Co-authored-by: Petr Ledvina <ledvinap@hp124.ekotip.cz>
Co-authored-by: Jan Post <Rm2k-Freak@web.de>
* unittest - fix duplicate symbols in unittests
Some symbols were declared again
With clang -fcommon, this resulted in allocatin in common segment and
prevented error.
(tentative definitions in C standard).
-fno-common (now default in clang https://reviews.llvm.org/D75056)
causes compilation errors.
Declarations are now marked extern.
* unittest - fix scheduler array size for unittest
Unittest needs extra space for canary
* unittest - fix missing include (needed for clang-16)
* unittest - remove unused varibles
-Werror in clang 15+
* unittest - increase max supported version to clang-16
* unittest - conditionaly disable useless output in unittests
* unittest - C++11 version of STATIC_ASSERT
* unittest - fix initializers for g++
- Change order of initializers to match order in struct
- make valueTable initializion consistent (necessary for C++)
- adapt controlRateConfig
* unittest - adapt scheduler_unitest for g++
scheduler_stubs.c is necessary to initialize task_attributes
* unittest - fix ledstrip unittest
only part of config was zeroed
* unittest - fix g++ warnings
- memcpy when length is known and \0 is not copied
- isError is local stub, no extern
- serialReadStub - don't memcpy into object, use initializer
* cli - cleanup cliGetSettingIndex
- compare only passed bytes (old version may read data after
name)
- input string is const
* unittest - fix ld warning from PG sections
move pg data sections after .rodata. Sections were marked as writable
due to relocation (!?). That marked .text output section
(containing .pg_data) as writable too and linker correctly complained
that executable section is writable.
* unittest - cleanup
* unittest - adapt after code cleanup, add gcc
- remove clang flags that are not necessary now (tested on clang-11
and clang-16)
- add support for gcc ( make test CC=gcc CXX=g++ )
- add suport for different optimization level (detects some code
problems) : make test OPTIMIZE=-O2
- fallback to clang on Linux too
* fixup! unittest - conditionaly disable useless output in unittests
* set default of spec prearm screen to false if race pro not defined
* Simple variant - thanks Ledvinap
---------
Co-authored-by: Eike Ahmels <ea@weslink.de>
Co-authored-by: Mark Haslinghuis <mark@numloq.nl>
