jflyper
b7342b98e2
Cosmetics around masterConfig.osdProfile.item_pos[]
2016-11-08 13:18:28 +09:00
jflyper
bf5430a2bd
Remove historical OSD_CALLS_CMS
...
This was a part of the original code, and was left here so there will
be an option to call CMS code from OSD task so that there is no need
for a separate CMS task.
It was eventually unused; there are couples of important logics around
cmsOpenMenu so doing this will require the same amount of code.
2016-11-08 12:14:27 +09:00
jflyper
576ad19914
Add OME_Funcall to call a function.
...
With the introduction of the CME_Menu, OME_Submenu became unsuitable
for general function calls. Actually, it works and call the designated
function, but attempt to externally traverse the menu structure fail
because it expects CME_Menu * as data for OME_Submenu.
2016-11-08 05:27:09 +09:00
jflyper
c12942ed41
Substitute FEATURE_MSP_DISPLAYPORT with !defined(OSD)
...
Save feature bits.
2016-11-07 22:29:35 +09:00
jflyper
5a6828b87f
RAMDOM!!!
2016-11-07 20:35:01 +09:00
jflyper
aed2e48266
Tidy
2016-11-07 20:17:52 +09:00
jflyper
1da1837288
Change feature name to MSP_DISPLAYPORT
...
And some build option fix.
2016-11-07 18:53:23 +09:00
jflyper
3c2849ffdc
VTX menu: onEntry and onExit should be working now
...
Don’t know why this was overlooked.
Needs testing.
2016-11-07 17:12:57 +09:00
jflyper
3bce0fb5f1
Overlooked menu separation from osd.c
...
This was overlooked (cms_menu_osd.h was already there).
Now the element position editing capability is absolutely gone.
2016-11-07 16:54:22 +09:00
jflyper
941c3abb12
IMU menu: fixed ranges to match that of cli.
2016-11-07 16:51:29 +09:00
jflyper
ee6641a917
Fix profile number offset problem
2016-11-07 14:33:12 +09:00
jflyper
064f090a48
Merge pull request #6 from martinbudden/jf_osd5
...
Fixed overlooked USE_MSP_OSD
2016-11-07 06:14:38 +09:00
Martin Budden
7ff8547c70
Fixed overlooked USE_MSP_OSD
2016-11-06 21:11:08 +00:00
jflyper
ca4601bc46
Merge pull request #5 from martinbudden/jf_osd4
...
CMS file renaming. displayPort renaming
2016-11-07 05:52:24 +09:00
Martin Budden
44d633e5e7
Changed USE_MSP_OSD to USE_MSP_DISPLAYPORT
2016-11-06 20:40:42 +00:00
Martin Budden
d8a83518db
CMS file renaming. displayPort renaming
2016-11-06 20:24:33 +00:00
jflyper
70ae5dd8da
Merge pull request #4 from martinbudden/jf_osd3
...
Code tidy and addition of GPL headers
2016-11-07 01:56:10 +09:00
Martin Budden
a7a428a5bb
Code tidy and addition of GPL headers
2016-11-06 10:29:11 +00:00
jflyper
31b6e7e024
Menu tidy
2016-11-06 16:54:53 +09:00
jflyper
0c57456ae7
Fix reference to cms in non-CMS case (osd.c)
2016-11-06 11:54:25 +09:00
jflyper
a6b03a9473
Touch-ups after rebase
...
Led strip’s color manipulation was dropped due to the drastically
change in the config structure; led strip menu now only has feature
on/off.
2016-11-06 04:34:19 +09:00
jflyper
e9a2f2b2c1
Merge remote-tracking branch 'betaflight/master' into bfdev-osd-cms-separation-poc
2016-11-06 02:43:24 +09:00
jflyper
4ae6f8c1c4
displayPort device registration changed
2016-11-06 02:37:45 +09:00
J Blackman
578bf914f6
Merge pull request #1465 from blckmn/led_fix
...
Fixes reset LED issue (bad define)
2016-11-05 21:09:09 +11:00
blckmn
3395d9ca2c
Fixes reset LED issue (bad define)
2016-11-05 21:08:11 +11:00
Martin Budden
abf519f46b
Merge pull request #1464 from fredmcc/SmartportSpeedFix
...
Smart Port telemetry GPS ground speed unit is not applicable. (#2166 )
2016-11-05 10:43:48 +01:00
Sami Korhonen
d2981cd704
escprog inverted output support
...
multiport test, usage "escprog ki 255"
2016-11-05 11:27:02 +02:00
hori64
1296169091
Smart Port telemetry GPS ground speed unit is not applicable. ( #2166 )
...
Second try
2016-11-05 10:16:07 +01:00
jflyper
131147322d
Add menuErr to notify obvious error in menu contents
2016-11-05 17:26:45 +09:00
Martin Budden
9124c496b6
Merge pull request #1462 from blckmn/led_mapping
...
Moving LED strip output pin to be configurable via resource command
2016-11-05 09:25:01 +01:00
Martin Budden
537e4ce676
Merge pull request #1447 from blckmn/REVOLT
...
Adding both AirbotF4 and Revolt targets
2016-11-05 09:21:01 +01:00
Martin Budden
504ac9c134
Merge pull request #1460 from blckmn/assign_any
...
Allow any allocation for motors and servos
2016-11-05 09:18:49 +01:00
blckmn
abcbd4cb84
Formatting
2016-11-05 19:09:08 +11:00
blckmn
a01a71cddb
As per @martinbudden suggestion including io_types.h only, and fixed osd.c master config changes
2016-11-05 17:53:43 +11:00
jflyper
e6dd0e6c5c
DYNAMIC bit is added to entry flags
...
This will stash the special type OME_Polled_INT16 for RC preview menu,
and add capability to all value types to be polled dynamically.
2016-11-05 14:24:18 +09:00
jflyper
9008116823
onExit is now called with pointer to OSD_Entry at the time of exit
...
This will remove the final remaining reference to RC preview menu
(which required not to exit with KEY_ESC).
2016-11-05 13:14:54 +09:00
blckmn
e56f915018
Moving LED strip to be configurable via resource command
2016-11-05 13:35:20 +11:00
jflyper
f66a08d457
Merge branch 'bfdev-osd-cms-separation-poc' of https://github.com/jflyper/cleanflight into bfdev-osd-cms-separation-poc
2016-11-05 11:22:47 +09:00
jflyper
1961e50f0b
Introduce CMS_Menu
2016-11-05 10:11:34 +09:00
jflyper
a22caf674f
Merge pull request #3 from martinbudden/jf_osd2
...
Split OLED displayport out of dashboard
2016-11-05 10:09:48 +09:00
blckmn
4c0273c119
Revolt has only 11 usable timers defined.
2016-11-05 11:13:58 +11:00
blckmn
c4f0bb18b8
Revolt adjustments. LED will be enabled once remapping is turned on for LEDs
2016-11-05 10:17:04 +11:00
blckmn
ff5c44b4dc
Allow any allocation for motors and servos
2016-11-05 06:51:43 +11:00
blckmn
c9e190fd7a
Leaving beeper defined so it can be assigned to a motor pin on revo
2016-11-05 06:32:13 +11:00
blckmn
8304becff7
Adding both AirbotF4 and Revolt targets
2016-11-05 06:32:13 +11:00
Anders Hoglund
3b506415c9
REVO. Wrong motor order, fixed.
2016-11-04 16:22:17 +01:00
borisbstyle
3cff93e868
Rename new LUX to LUXV2
2016-11-04 15:31:04 +01:00
borisbstyle
54c4be8419
Correct the motor layout for KISSFC
2016-11-04 15:16:04 +01:00
Martin Budden
7b1ebcc3f6
Made some cms functions and variables static
2016-11-04 11:44:45 +00:00
J Blackman
32a3f8912c
Merge pull request #1452 from martinbudden/bf_fc_name
...
Added and used FC_FIRMWARE_NAME #define
2016-11-04 21:38:26 +11:00
