...and apply them after a soft reset (which also required an additional
write to flash), it is now such that features and settings are modified
and stored in flash as before.
After initialisation completes, the active features are latched and are
not to be modified until the next startup. This guarantees that all
saved modifications are persistent even when power is switched of
(without a reset in between).
When a soft reset is required, the active features and the currently
configured features are used to detect if the oneshot feature has
changed state, in which case motor PWM outputs are stopped and soft
reset is done after a 1.5 second delay.
During normal operation the active features will not change and all
changes to features ordered via MSP commands or the CLI are applied to
the configuration that gets saved to flash.
The required effect of modifying features without changing the actions
in the running mainloop is achieved. The user needs to be aware that
changes to features are not applied immidiatly.
Previously, when a looptime of 8300 uS was chosen, the output would be unpredictable. Now the shots are fired only after every loop, not when the timer overflows.
This is first part of new softserial code. Main timer code is changed, changes to rest of code are kept to minimum.
macros for BASEPRI based synchronization are added to project (atomic.h)
TIMER_PERIOD fixed in pwm_rx.c
series development board.
These boards can be picked up for less than $11, coupled with a 10DOF
sensor board they make a great development platform or cheap expandable
FC.
Pretty much all pins are available to be used, unlike on the less
capable and more expensive OLIMEXINO.
