Hydra
f509582e6d
CF/BF - OSD - Cleanup the splash screen.
2017-03-19 10:36:16 +00:00
Florian Ragwitz
92f0f7ff69
Give cell voltage element a default position
...
This is a follow-up to a151d5092
2017-03-19 10:32:13 +00:00
mikeller
0a37cf1b43
Added BEEROTORF4 target.
2017-03-19 14:59:55 +13:00
borisbstyle
db2e868675
Merge pull request #2682 from rafl/rafl/avg-cell-voltage
...
Add average cell voltage to OSD
2017-03-18 23:19:09 +01:00
Hydra
0b531db549
fix missing yaw default when using PGs. this resulted in no yaw from RC
...
input.
2017-03-18 20:30:43 +00:00
Florian Ragwitz
a151d50929
Add average cell voltage to OSD
...
This can make it a little easier for some pilots to see where their
battery is at, especially if they move forth and back between different
cell counts a lot.
2017-03-18 11:57:30 -07:00
Martin
473826760d
serialUARTInit: allow missing rx/tx pin
2017-03-17 11:10:48 -04:00
DieHertz
98d2dc85c0
Reverted defaults for some CLI values
2017-03-17 03:07:56 +03:00
DieHertz
4ad8e36bc8
Disabled MSP on first UART unless USE_MSP_UART defined
2017-03-17 02:56:52 +03:00
DieHertz
e570c4aba8
Fixed CLI output for name and acc_lpf_hz
2017-03-17 02:56:51 +03:00
DieHertz
d97a012eca
Set acc_lpf_hz default back to 10
2017-03-17 02:56:51 +03:00
DieHertz
2e98279369
Set default GPS baud rate back to 57600
2017-03-17 02:56:51 +03:00
DieHertz
cbc23bb68c
Avoid copying in pgRestFn_rxConfig()
2017-03-17 02:56:51 +03:00
Martin Budden
8a60857a09
Merge pull request #2663 from mikeller/fix_pg_resource
...
Fixed 'resource' command after PG introduction.
2017-03-16 22:29:13 +00:00
DieHertz
1b2cccddbf
Fixed PID & Rate profile output via diff/dump
2017-03-16 23:10:22 +03:00
DieHertz
0b100bf167
Fixed rxfail and rxrange CLI commands
2017-03-16 23:10:10 +03:00
Martin
dcdaa6c7ad
IO: handle NONE (NULL) io pin
2017-03-16 11:29:22 -04:00
mikeller
bda81afdbd
Fixed build. Also added 'const' to cast.
2017-03-17 03:15:16 +13:00
DieHertz
dcecf9dc67
Fixed default RC map
2017-03-16 17:09:44 +03:00
mikeller
4c5f3ff412
Fixed 'resource' command after PG introduction.
2017-03-17 02:48:40 +13:00
blckmn
9d15fc5441
Removed clearing of IT_TCIF flag
2017-03-16 22:14:13 +11:00
blckmn
6487f995d8
Fix for F4 broken DSHOT
2017-03-16 20:30:49 +11:00
Michael Keller
9b19e99e56
Merge pull request #2539 from mikeller/make_target_mk_consistent
...
Make target.mk consistent.
2017-03-16 13:21:38 +13:00
Michael Keller
d857847157
Merge pull request #2659 from mamaretti/master
...
Added climbrate m/s and m/3s to Hott EAM
2017-03-16 10:12:06 +13:00
borisbstyle
9f60b69567
Merge pull request #2599 from mikeller/suppress_listing_of_softserials_without_resources
...
Suppress listing SOFTSERIAL ports if they don't have pins assigned.
2017-03-15 22:07:19 +01:00
borisbstyle
67467b22b9
Merge pull request #2642 from martinbudden/bf_config_eeprom_tidy
...
Removed unnecessary headers from config_eeprom.c
2017-03-15 22:05:46 +01:00
Michi
2b5ca26cbb
updated hott_unittest, for using climbrate m/s and m/3s to Hott EAM
2017-03-15 21:45:21 +01:00
Michi
1689b84642
Added climbrate m/s and m/3s to Hott EAM
2017-03-15 19:57:45 +01:00
DieHertz
393b30979f
Added serialConfig rate setting into reset function for task rescheduling
2017-03-14 12:35:06 +03:00
Magnus Ivarsson
b13d4694bb
Combine ibus serial rx and ibus telemetry on the same fc uart on a single pin.
...
```
+---------+
| FS-iA6B |
| |
| Ser RX |---|<---\ +------------+
| | | | FC |
| Sensor |---[R]--*-------| Uart TX |
+---------+ +------------+
```
R = 10Kohm, Diode 1N4148 or similar.
Both uart tx and rx channels are used so it's not possible to use the spare pin for rx of something else.
Configure the serial port like this to get both serial rx and ibus telemetry on the same port:
```
serial 1 4160 115200 57600 115200 115200
```
It is still possible to run the serial rx and ibus telemetry on two uarts like before, an example:
```
serial 1 64 115200 57600 0 115200
serial 2 4096 115200 57600 115200 115200
```
2017-03-13 21:43:37 +01:00
Michael Keller
355c7cc215
Merge pull request #2629 from mikeller/added_hott_eam_altitude
...
Added EAM baro altitude to HoTT.
2017-03-14 08:33:24 +13:00
Sami Korhonen
bdcb636bbc
Fix sector sizes to match linker scripts
2017-03-13 18:19:37 +02:00
Martin Budden
0f1925601e
Merge pull request #2634 from betaflight/fix-flash-erase-1
...
CF/BF - Fix incorrect flash page size configuration. Fixes #2633 .
2017-03-13 08:26:27 +00:00
Martin Budden
0fbbfb41a7
Removed unnecessary headers from config_eeprom.c
2017-03-13 08:08:45 +00:00
Martin Budden
463ee8af2d
Minor scheduler tidy
2017-03-12 16:39:05 +00:00
Hydra
633aa6cb3c
CF/BF - Fix incorrect flash page size configuration. Fixes #2633 .
...
Broken by 32a6409fc4
2017-03-12 13:29:51 +00:00
mikeller
441b0c4e98
Fixed 'get' / 'set' CLI commands.
2017-03-12 19:11:34 +13:00
mikeller
f141d3b461
Added EAM baro altitude to HoTT.
2017-03-12 17:51:38 +13:00
Michael Keller
454081978b
Merge pull request #2627 from GTorreil/patch-1
...
Fix #2626
2017-03-12 16:59:37 +13:00
mikeller
d7d3caf3e6
Made KROOZX target PG aware.
2017-03-12 16:41:17 +13:00
Michael Keller
10ae48b463
Merge pull request #2562 from softsr/kroozx_port
...
Added KroozX board
2017-03-12 16:31:36 +13:00
G. Torreilles
398df910f7
Fix #2626
...
Fix swapped terms in function documentation. #2626
2017-03-11 23:19:52 +01:00
Martin Budden
c06c790dc5
Merge pull request #2614 from martinbudden/bf_pg_tidy2
...
USE_PARAMETER_GROUPS tidy 2
2017-03-10 09:33:53 +00:00
Martin Budden
1ee2e40c23
Added missing SDCARD and VTX config items in CLI diff
2017-03-10 08:44:52 +00:00
Martin Budden
58a8bf3b6c
USE_PARAMETER_GROUPS tidy 2
2017-03-10 07:39:09 +00:00
DieHertz
d9cb02e310
Fixed USB disconnect (pull LOW for 200 ms)
2017-03-10 04:28:18 +03:00
Martin Budden
1964362dce
Removal of USE_PARAMETER_GROUPS 1
2017-03-09 22:03:59 +00:00
Martin Budden
d48398d15c
Merge pull request #2606 from martinbudden/bf_minor_pg_fixes
...
Minor fixes to parameter groups
2017-03-09 21:16:07 +00:00
Martin Budden
728b596e1b
Minor fixes to parameter groups
2017-03-09 19:02:47 +00:00
Anders Hoglund
2acdbecae3
Compile warnings on unused cliVtx() fixed.
2017-03-09 19:28:46 +01:00
