/*
 * This file is part of Cleanflight.
 *
 * Cleanflight is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * Cleanflight is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with Cleanflight.  If not, see <http://www.gnu.org/licenses/>.
 */

#pragma once

// Since serial ports can be used for any function these buffer sizes should be equal
// The two largest things that need to be sent are: 1, MSP responses, 2, UBLOX SVINFO packet.

// Size must be a power of two due to various optimizations which use 'and' instead of 'mod'
// Various serial routines return the buffer occupied size as uint8_t which would need to be extended in order to
// increase size further.
#define UART1_RX_BUFFER_SIZE    256
#define UART1_TX_BUFFER_SIZE    256
#define UART2_RX_BUFFER_SIZE    256
#define UART2_TX_BUFFER_SIZE    256
#define UART3_RX_BUFFER_SIZE    256
#define UART3_TX_BUFFER_SIZE    256
#define UART4_RX_BUFFER_SIZE    256
#define UART4_TX_BUFFER_SIZE    256
#define UART5_RX_BUFFER_SIZE    256
#define UART5_TX_BUFFER_SIZE    256
#define UART6_RX_BUFFER_SIZE    256
#define UART6_TX_BUFFER_SIZE    256

typedef struct {
    serialPort_t port;

#ifdef STM32F4
    DMA_Stream_TypeDef *rxDMAStream;
    DMA_Stream_TypeDef *txDMAStream;
    uint32_t rxDMAChannel;
    uint32_t txDMAChannel;
#else
    DMA_Channel_TypeDef *rxDMAChannel;
    DMA_Channel_TypeDef *txDMAChannel;
#endif

    uint32_t rxDMAIrq;
    uint32_t txDMAIrq;

    uint32_t rxDMAPos;
    bool txDMAEmpty;

    uint32_t txDMAPeripheralBaseAddr;
    uint32_t rxDMAPeripheralBaseAddr;

    USART_TypeDef *USARTx;
} uartPort_t;

serialPort_t *uartOpen(USART_TypeDef *USARTx, serialReceiveCallbackPtr rxCallback, uint32_t baudRate, portMode_t mode, portOptions_t options);

// serialPort API
void uartWrite(serialPort_t *instance, uint8_t ch);
uint32_t uartTotalRxBytesWaiting(const serialPort_t *instance);
uint32_t uartTotalTxBytesFree(const serialPort_t *instance);
uint8_t uartRead(serialPort_t *instance);
void uartSetBaudRate(serialPort_t *s, uint32_t baudRate);
bool isUartTransmitBufferEmpty(const serialPort_t *s);