Mirror/betaflight
1
0
Fork 0
mirror of https://github.com/betaflight/betaflight.git synced 2025-07-24 16:55:36 +03:00
Code Issues Wiki Activity
betaflight/src/main/mw.c

913 lines
27 KiB
C
Raw Blame History

/*
* This file is part of Cleanflight.
*
* Cleanflight is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* Cleanflight is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Cleanflight. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdbool.h>
#include <stdlib.h>
#include <stdint.h>
#include <math.h>
#include "platform.h"
#include "common/maths.h"
#include "common/axis.h"
#include "common/color.h"
#include "common/filter.h"
#include "drivers/sensor.h"
#include "drivers/accgyro.h"
#include "drivers/compass.h"
#include "drivers/light_led.h"
#include "drivers/gpio.h"
#include "drivers/system.h"
#include "drivers/serial.h"
#include "drivers/timer.h"
#include "drivers/pwm_rx.h"
#include "drivers/gyro_sync.h"
#include "sensors/sensors.h"
#include "sensors/boardalignment.h"
#include "sensors/sonar.h"
#include "sensors/compass.h"
#include "sensors/acceleration.h"
#include "sensors/barometer.h"
#include "sensors/gyro.h"
#include "sensors/battery.h"
#include "io/beeper.h"
#include "io/display.h"
#include "io/escservo.h"
#include "io/rc_controls.h"
#include "io/rc_curves.h"
#include "io/gimbal.h"
#include "io/gps.h"
#include "io/ledstrip.h"
#include "io/serial.h"
#include "io/serial_cli.h"
#include "io/serial_msp.h"
#include "io/statusindicator.h"
#include "rx/rx.h"
#include "rx/msp.h"
#include "telemetry/telemetry.h"
#include "blackbox/blackbox.h"
#include "flight/mixer.h"
#include "flight/pid.h"
#include "flight/imu.h"
#include "flight/altitudehold.h"
#include "flight/failsafe.h"
#include "flight/autotune.h"
#include "flight/navigation.h"
#include "config/runtime_config.h"
#include "config/config.h"
#include "config/config_profile.h"
#include "config/config_master.h"
// June 2013 V2.2-dev
enum {
ALIGN_GYRO = 0,
ALIGN_ACCEL = 1,
ALIGN_MAG = 2
};
/* VBAT monitoring interval (in microseconds) - 1s*/
#define VBATINTERVAL (6 * 3500)
/* IBat monitoring interval (in microseconds) - 6 default looptimes */
#define IBATINTERVAL (6 * 3500)
#define GYRO_WATCHDOG_DELAY 100 // Watchdog for boards without interrupt for gyro
uint32_t currentTime = 0;
uint32_t previousTime = 0;
uint16_t cycleTime = 0; // this is the number in micro second to achieve a full loop, it can differ a little and is taken into account in the PID loop
float dT;
int16_t magHold;
int16_t headFreeModeHold;
uint8_t motorControlEnable = false;
int16_t telemTemperature1; // gyro sensor temperature
static uint32_t disarmAt; // Time of automatic disarm when "Don't spin the motors when armed" is enabled and auto_disarm_delay is nonzero
extern uint8_t dynP8[3], dynI8[3], dynD8[3], PIDweight[3];
static bool isRXDataNew;
typedef void (*pidControllerFuncPtr)(pidProfile_t *pidProfile, controlRateConfig_t *controlRateConfig,
uint16_t max_angle_inclination, rollAndPitchTrims_t *angleTrim, rxConfig_t *rxConfig); // pid controller function prototype
extern pidControllerFuncPtr pid_controller;
void applyAndSaveAccelerometerTrimsDelta(rollAndPitchTrims_t *rollAndPitchTrimsDelta)
{
currentProfile->accelerometerTrims.values.roll += rollAndPitchTrimsDelta->values.roll;
currentProfile->accelerometerTrims.values.pitch += rollAndPitchTrimsDelta->values.pitch;
saveConfigAndNotify();
}
#ifdef AUTOTUNE
void updateAutotuneState(void)
{
static bool landedAfterAutoTuning = false;
static bool autoTuneWasUsed = false;
if (IS_RC_MODE_ACTIVE(BOXAUTOTUNE)) {
if (!FLIGHT_MODE(AUTOTUNE_MODE)) {
if (ARMING_FLAG(ARMED)) {
if (isAutotuneIdle() || landedAfterAutoTuning) {
autotuneReset();
landedAfterAutoTuning = false;
}
autotuneBeginNextPhase(&currentProfile->pidProfile);
ENABLE_FLIGHT_MODE(AUTOTUNE_MODE);
autoTuneWasUsed = true;
} else {
if (havePidsBeenUpdatedByAutotune()) {
saveConfigAndNotify();
autotuneReset();
}
}
}
return;
}
if (FLIGHT_MODE(AUTOTUNE_MODE)) {
autotuneEndPhase();
DISABLE_FLIGHT_MODE(AUTOTUNE_MODE);
}
if (!ARMING_FLAG(ARMED) && autoTuneWasUsed) {
landedAfterAutoTuning = true;
}
}
#endif
bool isCalibrating()
{
#ifdef BARO
if (sensors(SENSOR_BARO) && !isBaroCalibrationComplete()) {
return true;
}
#endif
// Note: compass calibration is handled completely differently, outside of the main loop, see f.CALIBRATE_MAG
return (!isAccelerationCalibrationComplete() && sensors(SENSOR_ACC)) || (!isGyroCalibrationComplete());
}
void annexCode(void)
{
int32_t tmp, tmp2;
int32_t axis, prop1 = 0, prop2;
static uint32_t vbatLastServiced = 0;
static uint32_t ibatLastServiced = 0;
// PITCH & ROLL only dynamic PID adjustment, depending on throttle value
if (rcData[THROTTLE] < currentControlRateProfile->tpa_breakpoint) {
prop2 = 100;
} else {
if (rcData[THROTTLE] < 2000) {
prop2 = 100 - (uint16_t)currentControlRateProfile->dynThrPID * (rcData[THROTTLE] - currentControlRateProfile->tpa_breakpoint) / (2000 - currentControlRateProfile->tpa_breakpoint);
} else {
prop2 = 100 - currentControlRateProfile->dynThrPID;
}
}
for (axis = 0; axis < 3; axis++) {
tmp = MIN(ABS(rcData[axis] - masterConfig.rxConfig.midrc), 500);
if (axis == ROLL || axis == PITCH) {
if (currentProfile->rcControlsConfig.deadband) {
if (tmp > currentProfile->rcControlsConfig.deadband) {
tmp -= currentProfile->rcControlsConfig.deadband;
} else {
tmp = 0;
}
}
tmp2 = tmp / 100;
rcCommand[axis] = lookupPitchRollRC[tmp2] + (tmp - tmp2 * 100) * (lookupPitchRollRC[tmp2 + 1] - lookupPitchRollRC[tmp2]) / 100;
prop1 = 100 - (uint16_t)currentControlRateProfile->rates[axis] * tmp / 500;
prop1 = (uint16_t)prop1 * prop2 / 100;
} else if (axis == YAW) {
if (currentProfile->rcControlsConfig.yaw_deadband) {
if (tmp > currentProfile->rcControlsConfig.yaw_deadband) {
tmp -= currentProfile->rcControlsConfig.yaw_deadband;
} else {
tmp = 0;
}
}
tmp2 = tmp / 100;
rcCommand[axis] = (lookupYawRC[tmp2] + (tmp - tmp2 * 100) * (lookupYawRC[tmp2 + 1] - lookupYawRC[tmp2]) / 100) * -masterConfig.yaw_control_direction;
prop1 = 100 - (uint16_t)currentControlRateProfile->rates[axis] * ABS(tmp) / 500;
}
// FIXME axis indexes into pids. use something like lookupPidIndex(rc_alias_e alias) to reduce coupling.
dynP8[axis] = (uint16_t)currentProfile->pidProfile.P8[axis] * prop1 / 100;
dynI8[axis] = (uint16_t)currentProfile->pidProfile.I8[axis] * prop1 / 100;
dynD8[axis] = (uint16_t)currentProfile->pidProfile.D8[axis] * prop1 / 100;
// non coupled PID reduction scaler used in PID controller 1 and PID controller 2. YAW TPA disabled. 100 means 100% of the pids
if (axis == YAW) {
PIDweight[axis] = 100;
}
else {
PIDweight[axis] = prop2;
}
if (rcData[axis] < masterConfig.rxConfig.midrc)
rcCommand[axis] = -rcCommand[axis];
}
tmp = constrain(rcData[THROTTLE], masterConfig.rxConfig.mincheck, PWM_RANGE_MAX);
tmp = (uint32_t)(tmp - masterConfig.rxConfig.mincheck) * PWM_RANGE_MIN / (PWM_RANGE_MAX - masterConfig.rxConfig.mincheck); // [MINCHECK;2000] -> [0;1000]
tmp2 = tmp / 100;
rcCommand[THROTTLE] = lookupThrottleRC[tmp2] + (tmp - tmp2 * 100) * (lookupThrottleRC[tmp2 + 1] - lookupThrottleRC[tmp2]) / 100; // [0;1000] -> expo -> [MINTHROTTLE;MAXTHROTTLE]
if (FLIGHT_MODE(HEADFREE_MODE)) {
float radDiff = degreesToRadians(heading - headFreeModeHold);
float cosDiff = cos_approx(radDiff);
float sinDiff = sin_approx(radDiff);
int16_t rcCommand_PITCH = rcCommand[PITCH] * cosDiff + rcCommand[ROLL] * sinDiff;
rcCommand[ROLL] = rcCommand[ROLL] * cosDiff - rcCommand[PITCH] * sinDiff;
rcCommand[PITCH] = rcCommand_PITCH;
}
if (feature(FEATURE_VBAT)) {
if ((int32_t)(currentTime - vbatLastServiced) >= VBATINTERVAL) {
vbatLastServiced = currentTime;
updateBattery();
}
}
if (feature(FEATURE_CURRENT_METER)) {
int32_t ibatTimeSinceLastServiced = (int32_t) (currentTime - ibatLastServiced);
if (ibatTimeSinceLastServiced >= IBATINTERVAL) {
ibatLastServiced = currentTime;
updateCurrentMeter((ibatTimeSinceLastServiced / 1000), &masterConfig.rxConfig, masterConfig.flight3DConfig.deadband3d_throttle);
}
}
beeperUpdate(); //call periodic beeper handler
if (ARMING_FLAG(ARMED)) {
LED0_ON;
} else {
if (IS_RC_MODE_ACTIVE(BOXARM) == 0) {
ENABLE_ARMING_FLAG(OK_TO_ARM);
}
if (!STATE(SMALL_ANGLE)) {
DISABLE_ARMING_FLAG(OK_TO_ARM);
}
if (IS_RC_MODE_ACTIVE(BOXAUTOTUNE)) {
DISABLE_ARMING_FLAG(OK_TO_ARM);
}
if (isCalibrating()) {
warningLedFlash();
DISABLE_ARMING_FLAG(OK_TO_ARM);
} else {
if (ARMING_FLAG(OK_TO_ARM)) {
warningLedDisable();
} else {
warningLedFlash();
}
}
warningLedUpdate();
}
#ifdef TELEMETRY
telemetryCheckState();
#endif
handleSerial();
#ifdef GPS
if (sensors(SENSOR_GPS)) {
updateGpsIndicator(currentTime);
}
#endif
// Read out gyro temperature. can use it for something somewhere. maybe get MCU temperature instead? lots of fun possibilities.
if (gyro.temperature)
gyro.temperature(&telemTemperature1);
}
void mwDisarm(void)
{
if (ARMING_FLAG(ARMED)) {
DISABLE_ARMING_FLAG(ARMED);
#ifdef BLACKBOX
if (feature(FEATURE_BLACKBOX)) {
finishBlackbox();
}
#endif
beeper(BEEPER_DISARMING); // emit disarm tone
}
}
#define TELEMETRY_FUNCTION_MASK (FUNCTION_TELEMETRY_FRSKY | FUNCTION_TELEMETRY_HOTT | FUNCTION_TELEMETRY_MSP | FUNCTION_TELEMETRY_SMARTPORT)
void releaseSharedTelemetryPorts(void) {
serialPort_t *sharedPort = findSharedSerialPort(TELEMETRY_FUNCTION_MASK, FUNCTION_MSP);
while (sharedPort) {
mspReleasePortIfAllocated(sharedPort);
sharedPort = findNextSharedSerialPort(TELEMETRY_FUNCTION_MASK, FUNCTION_MSP);
}
}
void mwArm(void)
{
if (ARMING_FLAG(OK_TO_ARM)) {
if (ARMING_FLAG(ARMED)) {
return;
}
if (IS_RC_MODE_ACTIVE(BOXFAILSAFE)) {
return;
}
if (!ARMING_FLAG(PREVENT_ARMING)) {
ENABLE_ARMING_FLAG(ARMED);
headFreeModeHold = heading;
#ifdef BLACKBOX
if (feature(FEATURE_BLACKBOX)) {
serialPort_t *sharedBlackboxAndMspPort = findSharedSerialPort(FUNCTION_BLACKBOX, FUNCTION_MSP);
if (sharedBlackboxAndMspPort) {
mspReleasePortIfAllocated(sharedBlackboxAndMspPort);
}
startBlackbox();
}
#endif
disarmAt = millis() + masterConfig.auto_disarm_delay * 1000; // start disarm timeout, will be extended when throttle is nonzero
//beep to indicate arming
#ifdef GPS
if (feature(FEATURE_GPS) && STATE(GPS_FIX) && GPS_numSat >= 5)
beeper(BEEPER_ARMING_GPS_FIX);
else
beeper(BEEPER_ARMING);
#else
beeper(BEEPER_ARMING);
#endif
return;
}
}
if (!ARMING_FLAG(ARMED)) {
beeperConfirmationBeeps(1);
}
}
// Automatic ACC Offset Calibration
bool AccInflightCalibrationArmed = false;
bool AccInflightCalibrationMeasurementDone = false;
bool AccInflightCalibrationSavetoEEProm = false;
bool AccInflightCalibrationActive = false;
uint16_t InflightcalibratingA = 0;
void handleInflightCalibrationStickPosition(void)
{
if (AccInflightCalibrationMeasurementDone) {
// trigger saving into eeprom after landing
AccInflightCalibrationMeasurementDone = false;
AccInflightCalibrationSavetoEEProm = true;
} else {
AccInflightCalibrationArmed = !AccInflightCalibrationArmed;
if (AccInflightCalibrationArmed) {
beeper(BEEPER_ACC_CALIBRATION);
} else {
beeper(BEEPER_ACC_CALIBRATION_FAIL);
}
}
}
void updateInflightCalibrationState(void)
{
if (AccInflightCalibrationArmed && ARMING_FLAG(ARMED) && rcData[THROTTLE] > masterConfig.rxConfig.mincheck && !IS_RC_MODE_ACTIVE(BOXARM)) { // Copter is airborne and you are turning it off via boxarm : start measurement
InflightcalibratingA = 50;
AccInflightCalibrationArmed = false;
}
if (IS_RC_MODE_ACTIVE(BOXCALIB)) { // Use the Calib Option to activate : Calib = TRUE Meausrement started, Land and Calib = 0 measurement stored
if (!AccInflightCalibrationActive && !AccInflightCalibrationMeasurementDone)
InflightcalibratingA = 50;
AccInflightCalibrationActive = true;
} else if (AccInflightCalibrationMeasurementDone && !ARMING_FLAG(ARMED)) {
AccInflightCalibrationMeasurementDone = false;
AccInflightCalibrationSavetoEEProm = true;
}
}
void updateMagHold(void)
{
if (ABS(rcCommand[YAW]) < 70 && FLIGHT_MODE(MAG_MODE)) {
int16_t dif = heading - magHold;
if (dif <= -180)
dif += 360;
if (dif >= +180)
dif -= 360;
dif *= -masterConfig.yaw_control_direction;
if (STATE(SMALL_ANGLE))
rcCommand[YAW] -= dif * currentProfile->pidProfile.P8[PIDMAG] / 30; // 18 deg
} else
magHold = heading;
}
typedef enum {
#ifdef MAG
UPDATE_COMPASS_TASK,
#endif
#ifdef BARO
UPDATE_BARO_TASK,
#endif
#ifdef SONAR
UPDATE_SONAR_TASK,
#endif
#if defined(BARO) || defined(SONAR)
CALCULATE_ALTITUDE_TASK,
#endif
UPDATE_DISPLAY_TASK
} periodicTasks;
#define PERIODIC_TASK_COUNT (UPDATE_DISPLAY_TASK + 1)
void executePeriodicTasks(void)
{
static int periodicTaskIndex = 0;
switch (periodicTaskIndex++) {
#ifdef MAG
case UPDATE_COMPASS_TASK:
if (sensors(SENSOR_MAG)) {
updateCompass(&masterConfig.magZero);
}
break;
#endif
#ifdef BARO
case UPDATE_BARO_TASK:
if (sensors(SENSOR_BARO)) {
baroUpdate(currentTime);
}
break;
#endif
#if defined(BARO) || defined(SONAR)
case CALCULATE_ALTITUDE_TASK:
#if defined(BARO) && !defined(SONAR)
if (sensors(SENSOR_BARO) && isBaroReady()) {
#endif
#if defined(BARO) && defined(SONAR)
if ((sensors(SENSOR_BARO) && isBaroReady()) || sensors(SENSOR_SONAR)) {
#endif
#if !defined(BARO) && defined(SONAR)
if (sensors(SENSOR_SONAR)) {
#endif
calculateEstimatedAltitude(currentTime);
}
break;
#endif
#ifdef SONAR
case UPDATE_SONAR_TASK:
if (sensors(SENSOR_SONAR)) {
sonarUpdate();
}
break;
#endif
#ifdef DISPLAY
case UPDATE_DISPLAY_TASK:
if (feature(FEATURE_DISPLAY)) {
updateDisplay();
}
break;
#endif
}
if (periodicTaskIndex >= PERIODIC_TASK_COUNT) {
periodicTaskIndex = 0;
}
}
void processRx(void)
{
static bool armedBeeperOn = false;
calculateRxChannelsAndUpdateFailsafe(currentTime);
// in 3D mode, we need to be able to disarm by switch at any time
if (feature(FEATURE_3D)) {
if (!IS_RC_MODE_ACTIVE(BOXARM))
mwDisarm();
}
updateRSSI(currentTime);
if (feature(FEATURE_FAILSAFE)) {
if (currentTime > FAILSAFE_POWER_ON_DELAY_US && !failsafeIsMonitoring()) {
failsafeStartMonitoring();
}
failsafeUpdateState();
}
throttleStatus_e throttleStatus = calculateThrottleStatus(&masterConfig.rxConfig, masterConfig.flight3DConfig.deadband3d_throttle);
if (throttleStatus == THROTTLE_LOW) {
pidResetErrorAngle();
pidResetErrorGyro();
}
// When armed and motors aren't spinning, do beeps and then disarm
// board after delay so users without buzzer won't lose fingers.
// mixTable constrains motor commands, so checking throttleStatus is enough
if (ARMING_FLAG(ARMED)
&& feature(FEATURE_MOTOR_STOP)
&& !STATE(FIXED_WING)
) {
if (isUsingSticksForArming()) {
if (throttleStatus == THROTTLE_LOW) {
if (masterConfig.auto_disarm_delay != 0
&& (int32_t)(disarmAt - millis()) < 0
) {
// auto-disarm configured and delay is over
mwDisarm();
armedBeeperOn = false;
} else {
// still armed; do warning beeps while armed
beeper(BEEPER_ARMED);
armedBeeperOn = true;
}
} else {
// throttle is not low
if (masterConfig.auto_disarm_delay != 0) {
// extend disarm time
disarmAt = millis() + masterConfig.auto_disarm_delay * 1000;
}
if (armedBeeperOn) {
beeperSilence();
armedBeeperOn = false;
}
}
} else {
// arming is via AUX switch; beep while throttle low
if (throttleStatus == THROTTLE_LOW) {
beeper(BEEPER_ARMED);
armedBeeperOn = true;
} else if (armedBeeperOn) {
beeperSilence();
armedBeeperOn = false;
}
}
}
processRcStickPositions(&masterConfig.rxConfig, throttleStatus, masterConfig.retarded_arm, masterConfig.disarm_kill_switch);
if (feature(FEATURE_INFLIGHT_ACC_CAL)) {
updateInflightCalibrationState();
}
updateActivatedModes(currentProfile->modeActivationConditions);
if (!cliMode) {
updateAdjustmentStates(currentProfile->adjustmentRanges);
processRcAdjustments(currentControlRateProfile, &masterConfig.rxConfig);
}
bool canUseHorizonMode = true;
if ((IS_RC_MODE_ACTIVE(BOXANGLE) || (feature(FEATURE_FAILSAFE) && failsafeIsActive())) && (sensors(SENSOR_ACC))) {
// bumpless transfer to Level mode
canUseHorizonMode = false;
if (!FLIGHT_MODE(ANGLE_MODE)) {
pidResetErrorAngle();
ENABLE_FLIGHT_MODE(ANGLE_MODE);
}
} else {
DISABLE_FLIGHT_MODE(ANGLE_MODE); // failsafe support
}
if (IS_RC_MODE_ACTIVE(BOXHORIZON) && canUseHorizonMode) {
DISABLE_FLIGHT_MODE(ANGLE_MODE);
if (!FLIGHT_MODE(HORIZON_MODE)) {
pidResetErrorAngle();
ENABLE_FLIGHT_MODE(HORIZON_MODE);
}
} else {
DISABLE_FLIGHT_MODE(HORIZON_MODE);
}
if (FLIGHT_MODE(ANGLE_MODE) || FLIGHT_MODE(HORIZON_MODE)) {
LED1_ON;
} else {
LED1_OFF;
}
#ifdef MAG
if (sensors(SENSOR_ACC) || sensors(SENSOR_MAG)) {
if (IS_RC_MODE_ACTIVE(BOXMAG)) {
if (!FLIGHT_MODE(MAG_MODE)) {
ENABLE_FLIGHT_MODE(MAG_MODE);
magHold = heading;
}
} else {
DISABLE_FLIGHT_MODE(MAG_MODE);
}
if (IS_RC_MODE_ACTIVE(BOXHEADFREE)) {
if (!FLIGHT_MODE(HEADFREE_MODE)) {
ENABLE_FLIGHT_MODE(HEADFREE_MODE);
}
} else {
DISABLE_FLIGHT_MODE(HEADFREE_MODE);
}
if (IS_RC_MODE_ACTIVE(BOXHEADADJ)) {
headFreeModeHold = heading; // acquire new heading
}
}
#endif
#ifdef GPS
if (sensors(SENSOR_GPS)) {
updateGpsWaypointsAndMode();
}
#endif
if (IS_RC_MODE_ACTIVE(BOXPASSTHRU)) {
ENABLE_FLIGHT_MODE(PASSTHRU_MODE);
} else {
DISABLE_FLIGHT_MODE(PASSTHRU_MODE);
}
if (masterConfig.mixerMode == MIXER_FLYING_WING || masterConfig.mixerMode == MIXER_AIRPLANE) {
DISABLE_FLIGHT_MODE(HEADFREE_MODE);
}
#ifdef TELEMETRY
if (feature(FEATURE_TELEMETRY)) {
if ((!masterConfig.telemetryConfig.telemetry_switch && ARMING_FLAG(ARMED)) ||
(masterConfig.telemetryConfig.telemetry_switch && IS_RC_MODE_ACTIVE(BOXTELEMETRY))) {
releaseSharedTelemetryPorts();
} else {
// the telemetry state must be checked immediately so that shared serial ports are released.
telemetryCheckState();
mspAllocateSerialPorts(&masterConfig.serialConfig);
}
}
#endif
}
// Gyro Low Pass
void filterGyro(void) {
int axis;
static float dTGyro;
static filterStatePt1_t gyroADCState[XYZ_AXIS_COUNT];
if (!dTGyro) {
dTGyro = (float)targetLooptime * 0.000001f;
}
for (axis = 0; axis < XYZ_AXIS_COUNT; axis++) {
gyroADC[axis] = filterApplyPt1(gyroADC[axis], &gyroADCState[axis], currentProfile->pidProfile.gyro_cut_hz, dTGyro);
}
}
void filterRc(void){
static int16_t lastCommand[4] = { 0, 0, 0, 0 };
static int16_t deltaRC[4] = { 0, 0, 0, 0 };
static int16_t factor, rcInterpolationFactor;
static filterStatePt1_t filteredCycleTimeState;
uint16_t rxRefreshRate, filteredCycleTime;
// Set RC refresh rate for sampling and channels to filter
initRxRefreshRate(&rxRefreshRate);
filteredCycleTime = filterApplyPt1(cycleTime, &filteredCycleTimeState, 1, dT);
rcInterpolationFactor = rxRefreshRate / filteredCycleTime + 1;
if (isRXDataNew) {
for (int channel=0; channel < 4; channel++) {
deltaRC[channel] = rcData[channel] - (lastCommand[channel] - deltaRC[channel] * factor / rcInterpolationFactor);
lastCommand[channel] = rcData[channel];
}
isRXDataNew = false;
factor = rcInterpolationFactor - 1;
} else {
factor--;
}
// Interpolate steps of rcData
if (factor > 0) {
for (int channel=0; channel < 4; channel++) {
rcData[channel] = lastCommand[channel] - deltaRC[channel] * factor/rcInterpolationFactor;
}
} else {
factor = 0;
}
}
// Function for loop trigger
bool runLoop(uint32_t loopTime) {
bool loopTrigger = false;
if (masterConfig.syncGyroToLoop) {
if (gyroSyncCheckUpdate() || (int32_t)(currentTime - (loopTime + GYRO_WATCHDOG_DELAY)) >= 0) {
loopTrigger = true;
}
} else if (masterConfig.looptime == 0 || (int32_t)(currentTime - loopTime) >= 0){
loopTrigger = true;
}
return loopTrigger;
}
void loop(void)
{
static uint32_t loopTime;
#if defined(BARO) || defined(SONAR)
static bool haveProcessedAnnexCodeOnce = false;
#endif
updateRx(currentTime);
if (shouldProcessRx(currentTime)) {
processRx();
isRXDataNew = true;
#ifdef BARO
// the 'annexCode' initialses rcCommand, updateAltHoldState depends on valid rcCommand data.
if (haveProcessedAnnexCodeOnce) {
if (sensors(SENSOR_BARO)) {
updateAltHoldState();
}
}
#endif
#ifdef SONAR
// the 'annexCode' initialses rcCommand, updateAltHoldState depends on valid rcCommand data.
if (haveProcessedAnnexCodeOnce) {
if (sensors(SENSOR_SONAR)) {
updateSonarAltHoldState();
}
}
#endif
} else {
// not processing rx this iteration
executePeriodicTasks();
// if GPS feature is enabled, gpsThread() will be called at some intervals to check for stuck
// hardware, wrong baud rates, init GPS if needed, etc. Don't use SENSOR_GPS here as gpsThread() can and will
// change this based on available hardware
#ifdef GPS
if (feature(FEATURE_GPS)) {
gpsThread();
}
#endif
}
currentTime = micros();
if (runLoop(loopTime)) {
loopTime = currentTime + targetLooptime;
imuUpdate(&currentProfile->accelerometerTrims);
// Measure loop rate just after reading the sensors
currentTime = micros();
cycleTime = (int32_t)(currentTime - previousTime);
previousTime = currentTime;
dT = (float)cycleTime * 0.000001f;
if (currentProfile->pidProfile.gyro_fir_filter_enable) {
filterApply7TapFIR(gyroADC);
else if (currentProfile->pidProfile.gyro_cut_hz) {
filterGyro();
}
if (masterConfig.rcSmoothing) {
filterRc();
}
annexCode();
#if defined(BARO) || defined(SONAR)
haveProcessedAnnexCodeOnce = true;
#endif
#ifdef AUTOTUNE
updateAutotuneState();
#endif
#ifdef MAG
if (sensors(SENSOR_MAG)) {
updateMagHold();
}
#endif
#if defined(BARO) || defined(SONAR)
if (sensors(SENSOR_BARO) || sensors(SENSOR_SONAR)) {
if (FLIGHT_MODE(BARO_MODE) || FLIGHT_MODE(SONAR_MODE)) {
applyAltHold(&masterConfig.airplaneConfig);
}
}
#endif
// If we're armed, at minimum throttle, and we do arming via the
// sticks, do not process yaw input from the rx. We do this so the
// motors do not spin up while we are trying to arm or disarm.
// Allow yaw control for tricopters if the user wants the servo to move even when unarmed.
if (isUsingSticksForArming() && rcData[THROTTLE] <= masterConfig.rxConfig.mincheck
#ifndef USE_QUAD_MIXER_ONLY
&& !((masterConfig.mixerMode == MIXER_TRI || masterConfig.mixerMode == MIXER_CUSTOM_TRI) && masterConfig.mixerConfig.tri_unarmed_servo)
&& masterConfig.mixerMode != MIXER_AIRPLANE
&& masterConfig.mixerMode != MIXER_FLYING_WING
#endif
) {
rcCommand[YAW] = 0;
}
if (currentProfile->throttle_correction_value && (FLIGHT_MODE(ANGLE_MODE) || FLIGHT_MODE(HORIZON_MODE))) {
rcCommand[THROTTLE] += calculateThrottleAngleCorrection(currentProfile->throttle_correction_value);
}
#ifdef GPS
if (sensors(SENSOR_GPS)) {
if ((FLIGHT_MODE(GPS_HOME_MODE) || FLIGHT_MODE(GPS_HOLD_MODE)) && STATE(GPS_FIX_HOME)) {
updateGpsStateForHomeAndHoldMode();
}
}
#endif
// PID - note this is function pointer set by setPIDController()
pid_controller(
&currentProfile->pidProfile,
currentControlRateProfile,
masterConfig.max_angle_inclination,
&currentProfile->accelerometerTrims,
&masterConfig.rxConfig
);
mixTable();
#ifdef USE_SERVOS
filterServos();
writeServos();
#endif
if (motorControlEnable) {
writeMotors();
}
#ifdef BLACKBOX
if (!cliMode && feature(FEATURE_BLACKBOX)) {
handleBlackbox();
}
#endif
}
#ifdef TELEMETRY
if (!cliMode && feature(FEATURE_TELEMETRY)) {
telemetryProcess(&masterConfig.rxConfig, masterConfig.flight3DConfig.deadband3d_throttle);
}
#endif
#ifdef LED_STRIP
if (feature(FEATURE_LED_STRIP)) {
updateLedStrip();
}
#endif
}
Reference in a new issue View git blame Copy permalink