Mirror/betaflight
1
0
Fork 0
mirror of https://github.com/betaflight/betaflight.git synced 2025-07-13 03:20:00 +03:00
Code Issues Wiki Activity
Open Source Flight Controller Firmware
204 commits 10 branches 287 tags 524 MiB
Find a file
Dominic Clifton b92c3fa192 Replacing calls to isUartTransmitEmpty with isSoftSerialTransmitBufferEmpty. Replacing remaing calls to uartWrite with serialWrite. Adding isSoftSerialTransmitBufferEmpty to the serial API. Adding serialSet/GetBaudRate to the serial API. Since softSerial does not implement serialSetBaudRate some GPS serial initialisation code has been updated. 
At this point it is probably possible to switch around all the ports and use a software serial implementation if desired.
2013-10-01 00:24:23 +01:00
lib a couple optimizations for dynamic HSE frequency - moved SetSysClock() to run after reset vector + bss init, and changed rcc which used hardcoded HSE_VALUE. 2013-07-02 00:58:50 +00:00
obj fixed mag gain during testmode (thanks pm1) and added some explicit float definitions to mag test code. 2013-09-12 10:50:13 +00:00
src Replacing calls to isUartTransmitEmpty with isSoftSerialTransmitBufferEmpty. Replacing remaing calls to uartWrite with serialWrite. Adding isSoftSerialTransmitBufferEmpty to the serial API. Adding serialSet/GetBaudRate to the serial API. Since softSerial does not implement serialSetBaudRate some GPS serial initialisation code has been updated. 2013-10-01 00:24:23 +01:00
support Changing all line endings to WINDOWS line endings (CR+LF) and removing all End-Of-Line whitespace and using spaces instead of tabs. Please ensure you configure your editors and tools to follow suit. If using git please enable autocrlf in your .git/config file. 2013-09-06 23:14:48 +00:00
.gitignore [PATCH 2/4] gitignore 2013-05-29 00:08:38 +00:00
baseflight.uvproj reorganization of uart-based receiver drivers 2013-09-29 14:40:20 +00:00
JLinkSettings.ini imported STM32 multiwii port into baseflight dir 2012-02-16 09:39:58 +00:00
Makefile Renaming serialRead to softSerialRead. Adding serialRead to serial API and updating calls to uartRead and softSerialRead to use the serial API. Renamed uartPrint to serialPrint which now works on any serialPort implementation. 2013-09-30 23:30:12 +01:00
stm32_flash.ld added test driver for software i2c. disabled by default. no, that wasn't the cause of cycletime jumps. 2012-07-14 02:00:39 +00:00