mirror of
https://github.com/betaflight/betaflight.git
synced 2025-07-15 04:15:44 +03:00
7cb34205b3
Moved vtxtable frequency mode implementation into `vtx_common.c`. This makes the implementation available for all vtx types and allows for some code deduplication (see point below) Removed band and channel tracking from tramp and rtc6705. The hardware underlying both only support frequency mode and the tracking is now done in `vtx_common.c` using the new factory flag. Deleted vtxStringXXX. to continue supporting builds without `USE_VTX_TABLE`, new infrastructure was created in `drivers/vtx_table.c`, which loads fixed tables into vtxTableXXX when built witout `USE_VTX_TABLE`. Individual vtx implementations no longer need to load any band/channel tables. They only need to load their individual power tables when built without `USE_VTX_TABLE`. Additionally this allows for the next point: Fully integrated vtxTableXXX and removed the old and no longer needed indirection of frequency and power tables in `vtxDevice_t`. Removed VTX_SETTINGS_* constants from `vtx_common.h` and replaced them with the vtxtable equivalent. rtc6705 implementation now uses power values from vtxtable instead of using indices directly. It also stops using index 0. This makes it consistent with other vtx implementations and is more user configurable. It also cleans up `telemetry\srxl.c` which had to have a special case for rtc6705. Finally, frequency entries in the vtxtable can now be marked as empty by setting their frequency to 0. Betaflight will never allow a blocked channel to be selected. This is useful for vtxtable index mode (FACTORY flag set) where manufacturer-defined bands can be truncated to ensure compliance with local laws and regulations.
414 lines
14 KiB
Makefile
414 lines
14 KiB
Makefile
COMMON_SRC = \
|
|
build/build_config.c \
|
|
build/debug.c \
|
|
build/version.c \
|
|
$(TARGET_DIR_SRC) \
|
|
main.c \
|
|
$(addprefix pg/,$(notdir $(wildcard $(SRC_DIR)/pg/*.c))) \
|
|
$(addprefix common/,$(notdir $(wildcard $(SRC_DIR)/common/*.c))) \
|
|
$(addprefix config/,$(notdir $(wildcard $(SRC_DIR)/config/*.c))) \
|
|
cli/cli.c \
|
|
cli/settings.c \
|
|
drivers/adc.c \
|
|
drivers/buf_writer.c \
|
|
drivers/bus.c \
|
|
drivers/bus_i2c_config.c \
|
|
drivers/bus_i2c_busdev.c \
|
|
drivers/bus_i2c_soft.c \
|
|
drivers/bus_quadspi.c \
|
|
drivers/bus_spi.c \
|
|
drivers/bus_spi_config.c \
|
|
drivers/bus_spi_pinconfig.c \
|
|
drivers/buttons.c \
|
|
drivers/display.c \
|
|
drivers/dma_reqmap.c \
|
|
drivers/exti.c \
|
|
drivers/io.c \
|
|
drivers/light_led.c \
|
|
drivers/mco.c \
|
|
drivers/pinio.c \
|
|
drivers/resource.c \
|
|
drivers/rcc.c \
|
|
drivers/serial.c \
|
|
drivers/serial_pinconfig.c \
|
|
drivers/serial_uart.c \
|
|
drivers/serial_uart_pinconfig.c \
|
|
drivers/sound_beeper.c \
|
|
drivers/stack_check.c \
|
|
drivers/system.c \
|
|
drivers/timer_common.c \
|
|
drivers/timer.c \
|
|
drivers/transponder_ir_arcitimer.c \
|
|
drivers/transponder_ir_ilap.c \
|
|
drivers/transponder_ir_erlt.c \
|
|
fc/board_info.c \
|
|
fc/config.c \
|
|
fc/dispatch.c \
|
|
fc/hardfaults.c \
|
|
fc/tasks.c \
|
|
fc/runtime_config.c \
|
|
fc/stats.c \
|
|
io/beeper.c \
|
|
io/piniobox.c \
|
|
io/serial.c \
|
|
io/smartaudio_protocol.c \
|
|
io/statusindicator.c \
|
|
io/tramp_protocol.c \
|
|
io/transponder_ir.c \
|
|
io/usb_cdc_hid.c \
|
|
io/usb_msc.c \
|
|
msp/msp.c \
|
|
msp/msp_box.c \
|
|
msp/msp_serial.c \
|
|
scheduler/scheduler.c \
|
|
sensors/adcinternal.c \
|
|
sensors/battery.c \
|
|
sensors/current.c \
|
|
sensors/voltage.c \
|
|
target/config_helper.c \
|
|
fc/init.c \
|
|
fc/controlrate_profile.c \
|
|
drivers/camera_control.c \
|
|
drivers/accgyro/gyro_sync.c \
|
|
drivers/pwm_esc_detect.c \
|
|
drivers/pwm_output.c \
|
|
drivers/rx/rx_spi.c \
|
|
drivers/rx/rx_xn297.c \
|
|
drivers/rx/rx_pwm.c \
|
|
drivers/serial_softserial.c \
|
|
fc/core.c \
|
|
fc/rc.c \
|
|
fc/rc_adjustments.c \
|
|
fc/rc_controls.c \
|
|
fc/rc_modes.c \
|
|
flight/position.c \
|
|
flight/failsafe.c \
|
|
flight/gps_rescue.c \
|
|
flight/gyroanalyse.c \
|
|
flight/imu.c \
|
|
flight/mixer.c \
|
|
flight/mixer_tricopter.c \
|
|
flight/pid.c \
|
|
flight/rpm_filter.c \
|
|
flight/servos.c \
|
|
flight/servos_tricopter.c \
|
|
io/serial_4way.c \
|
|
io/serial_4way_avrootloader.c \
|
|
io/serial_4way_stk500v2.c \
|
|
rx/ibus.c \
|
|
rx/jetiexbus.c \
|
|
rx/msp.c \
|
|
rx/pwm.c \
|
|
rx/rx.c \
|
|
rx/rx_spi.c \
|
|
rx/rx_spi_common.c \
|
|
rx/crsf.c \
|
|
rx/sbus.c \
|
|
rx/sbus_channels.c \
|
|
rx/spektrum.c \
|
|
io/spektrum_vtx_control.c \
|
|
io/spektrum_rssi.c \
|
|
rx/sumd.c \
|
|
rx/sumh.c \
|
|
rx/xbus.c \
|
|
rx/fport.c \
|
|
sensors/acceleration.c \
|
|
sensors/boardalignment.c \
|
|
sensors/compass.c \
|
|
sensors/gyro.c \
|
|
sensors/initialisation.c \
|
|
blackbox/blackbox.c \
|
|
blackbox/blackbox_encoding.c \
|
|
blackbox/blackbox_io.c \
|
|
cms/cms.c \
|
|
cms/cms_menu_blackbox.c \
|
|
cms/cms_menu_builtin.c \
|
|
cms/cms_menu_failsafe.c \
|
|
cms/cms_menu_gps_rescue.c\
|
|
cms/cms_menu_imu.c \
|
|
cms/cms_menu_ledstrip.c \
|
|
cms/cms_menu_misc.c \
|
|
cms/cms_menu_osd.c \
|
|
cms/cms_menu_power.c \
|
|
cms/cms_menu_saveexit.c \
|
|
cms/cms_menu_vtx_rtc6705.c \
|
|
cms/cms_menu_vtx_smartaudio.c \
|
|
cms/cms_menu_vtx_tramp.c \
|
|
drivers/display_ug2864hsweg01.c \
|
|
drivers/light_ws2811strip.c \
|
|
drivers/rangefinder/rangefinder_hcsr04.c \
|
|
drivers/rangefinder/rangefinder_lidartf.c \
|
|
drivers/serial_escserial.c \
|
|
drivers/vtx_common.c \
|
|
drivers/vtx_table.c \
|
|
io/dashboard.c \
|
|
io/displayport_max7456.c \
|
|
io/displayport_msp.c \
|
|
io/displayport_oled.c \
|
|
io/displayport_srxl.c \
|
|
io/displayport_crsf.c \
|
|
io/displayport_hott.c \
|
|
io/rcdevice_cam.c \
|
|
io/rcdevice.c \
|
|
io/gps.c \
|
|
io/ledstrip.c \
|
|
io/pidaudio.c \
|
|
osd/osd.c \
|
|
osd/osd_elements.c \
|
|
sensors/barometer.c \
|
|
sensors/rangefinder.c \
|
|
telemetry/telemetry.c \
|
|
telemetry/crsf.c \
|
|
telemetry/srxl.c \
|
|
telemetry/frsky_hub.c \
|
|
telemetry/hott.c \
|
|
telemetry/jetiexbus.c \
|
|
telemetry/smartport.c \
|
|
telemetry/ltm.c \
|
|
telemetry/mavlink.c \
|
|
telemetry/msp_shared.c \
|
|
telemetry/ibus.c \
|
|
telemetry/ibus_shared.c \
|
|
sensors/esc_sensor.c \
|
|
io/vtx.c \
|
|
io/vtx_rtc6705.c \
|
|
io/vtx_smartaudio.c \
|
|
io/vtx_tramp.c \
|
|
io/vtx_control.c
|
|
|
|
COMMON_DEVICE_SRC = \
|
|
$(CMSIS_SRC) \
|
|
$(DEVICE_STDPERIPH_SRC)
|
|
|
|
COMMON_SRC := $(COMMON_SRC) $(COMMON_DEVICE_SRC)
|
|
|
|
ifeq ($(EXST),yes)
|
|
TARGET_FLAGS := -DUSE_EXST $(TARGET_FLAGS)
|
|
endif
|
|
|
|
ifeq ($(SIMULATOR_BUILD),yes)
|
|
TARGET_FLAGS := -DSIMULATOR_BUILD $(TARGET_FLAGS)
|
|
endif
|
|
|
|
SPEED_OPTIMISED_SRC := ""
|
|
SIZE_OPTIMISED_SRC := ""
|
|
|
|
ifneq ($(TARGET),$(filter $(TARGET),$(F1_TARGETS)))
|
|
SPEED_OPTIMISED_SRC := $(SPEED_OPTIMISED_SRC) \
|
|
common/encoding.c \
|
|
common/filter.c \
|
|
common/maths.c \
|
|
common/typeconversion.c \
|
|
drivers/accgyro/accgyro_fake.c \
|
|
drivers/accgyro/accgyro_mpu.c \
|
|
drivers/accgyro/accgyro_mpu3050.c \
|
|
drivers/accgyro/accgyro_mpu6050.c \
|
|
drivers/accgyro/accgyro_mpu6500.c \
|
|
drivers/accgyro/accgyro_spi_bmi160.c \
|
|
drivers/accgyro/accgyro_spi_icm20689.c \
|
|
drivers/accgyro/accgyro_spi_mpu6000.c \
|
|
drivers/accgyro/accgyro_spi_mpu6500.c \
|
|
drivers/accgyro/accgyro_spi_mpu9250.c \
|
|
drivers/accgyro_legacy/accgyro_adxl345.c \
|
|
drivers/accgyro_legacy/accgyro_bma280.c \
|
|
drivers/accgyro_legacy/accgyro_l3g4200d.c \
|
|
drivers/accgyro_legacy/accgyro_l3gd20.c \
|
|
drivers/accgyro_legacy/accgyro_lsm303dlhc.c \
|
|
drivers/accgyro_legacy/accgyro_mma845x.c \
|
|
drivers/adc.c \
|
|
drivers/buf_writer.c \
|
|
drivers/bus.c \
|
|
drivers/bus_quadspi.c \
|
|
drivers/bus_spi.c \
|
|
drivers/exti.c \
|
|
drivers/io.c \
|
|
drivers/pwm_output.c \
|
|
drivers/rcc.c \
|
|
drivers/serial.c \
|
|
drivers/serial_uart.c \
|
|
drivers/system.c \
|
|
drivers/timer.c \
|
|
fc/core.c \
|
|
fc/tasks.c \
|
|
fc/rc.c \
|
|
fc/rc_controls.c \
|
|
fc/runtime_config.c \
|
|
flight/gyroanalyse.c \
|
|
flight/imu.c \
|
|
flight/mixer.c \
|
|
flight/pid.c \
|
|
flight/rpm_filter.c \
|
|
rx/ibus.c \
|
|
rx/rx.c \
|
|
rx/rx_spi.c \
|
|
rx/crsf.c \
|
|
rx/sbus.c \
|
|
rx/sbus_channels.c \
|
|
rx/spektrum.c \
|
|
rx/sumd.c \
|
|
rx/xbus.c \
|
|
rx/fport.c \
|
|
scheduler/scheduler.c \
|
|
sensors/acceleration.c \
|
|
sensors/boardalignment.c \
|
|
sensors/gyro.c \
|
|
$(CMSIS_SRC) \
|
|
$(DEVICE_STDPERIPH_SRC) \
|
|
|
|
SIZE_OPTIMISED_SRC := $(SIZE_OPTIMISED_SRC) \
|
|
bus_bst_stm32f30x.c \
|
|
cli/cli.c \
|
|
cli/settings.c \
|
|
drivers/barometer/barometer_bmp085.c \
|
|
drivers/barometer/barometer_bmp280.c \
|
|
drivers/barometer/barometer_fake.c \
|
|
drivers/barometer/barometer_ms5611.c \
|
|
drivers/barometer/barometer_lps.c \
|
|
drivers/barometer/barometer_qmp6988.c \
|
|
drivers/bus_i2c_config.c \
|
|
drivers/bus_spi_config.c \
|
|
drivers/bus_spi_pinconfig.c \
|
|
drivers/compass/compass_ak8963.c \
|
|
drivers/compass/compass_ak8975.c \
|
|
drivers/compass/compass_fake.c \
|
|
drivers/compass/compass_hmc5883l.c \
|
|
drivers/compass/compass_qmc5883l.c \
|
|
drivers/compass/compass_lis3mdl.c \
|
|
drivers/display_ug2864hsweg01.c \
|
|
drivers/inverter.c \
|
|
drivers/light_ws2811strip.c \
|
|
drivers/light_ws2811strip_hal.c \
|
|
drivers/light_ws2811strip_stdperiph.c \
|
|
drivers/serial_escserial.c \
|
|
drivers/serial_pinconfig.c \
|
|
drivers/serial_tcp.c \
|
|
drivers/serial_uart_init.c \
|
|
drivers/serial_uart_pinconfig.c \
|
|
drivers/serial_usb_vcp.c \
|
|
drivers/transponder_ir_io_hal.c \
|
|
drivers/transponder_ir_io_stdperiph.c \
|
|
drivers/vtx_rtc6705_soft_spi.c \
|
|
drivers/vtx_rtc6705.c \
|
|
drivers/vtx_common.c \
|
|
fc/init.c \
|
|
fc/board_info.c \
|
|
config/config_eeprom.c \
|
|
config/feature.c \
|
|
config/config_streamer.c \
|
|
i2c_bst.c \
|
|
io/dashboard.c \
|
|
io/serial.c \
|
|
io/serial_4way.c \
|
|
io/serial_4way_avrootloader.c \
|
|
io/serial_4way_stk500v2.c \
|
|
io/transponder_ir.c \
|
|
io/usb_cdc_hid.c \
|
|
msp/msp_serial.c \
|
|
cms/cms.c \
|
|
cms/cms_menu_blackbox.c \
|
|
cms/cms_menu_builtin.c \
|
|
cms/cms_menu_failsafe.c \
|
|
cms/cms_menu_gps_rescue.c\
|
|
cms/cms_menu_imu.c \
|
|
cms/cms_menu_ledstrip.c \
|
|
cms/cms_menu_misc.c \
|
|
cms/cms_menu_osd.c \
|
|
cms/cms_menu_power.c \
|
|
cms/cms_menu_saveexit.c \
|
|
cms/cms_menu_vtx_rtc6705.c \
|
|
cms/cms_menu_vtx_smartaudio.c \
|
|
cms/cms_menu_vtx_tramp.c \
|
|
io/vtx.c \
|
|
io/vtx_rtc6705.c \
|
|
io/vtx_smartaudio.c \
|
|
io/vtx_tramp.c \
|
|
io/vtx_control.c \
|
|
io/spektrum_vtx_control.c \
|
|
osd/osd.c \
|
|
osd/osd_elements.c \
|
|
pg/pg.h
|
|
|
|
# F4 and F7 optimizations
|
|
ifneq ($(TARGET),$(filter $(TARGET),$(F3_TARGETS)))
|
|
SPEED_OPTIMISED_SRC := $(SPEED_OPTIMISED_SRC) \
|
|
drivers/bus_i2c_hal.c \
|
|
drivers/bus_spi_ll.c \
|
|
drivers/max7456.c \
|
|
drivers/pwm_output_dshot.c \
|
|
drivers/pwm_output_dshot_shared.c \
|
|
drivers/pwm_output_dshot_hal.c
|
|
endif #!F3
|
|
endif #!F1
|
|
|
|
# check if target.mk supplied
|
|
SRC := $(STARTUP_SRC) $(MCU_COMMON_SRC) $(TARGET_SRC) $(VARIANT_SRC)
|
|
|
|
# Files that should not be optimized, useful for debugging IMPRECISE cpu faults.
|
|
# Specify FULL PATH, e.g. "./lib/main/STM32F7/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_sdmmc.c"
|
|
NOT_OPTIMISED_SRC := $(NOT_OPTIMISED_SRC) \
|
|
|
|
ifneq ($(DSP_LIB),)
|
|
|
|
INCLUDE_DIRS += $(DSP_LIB)/Include
|
|
|
|
SRC += $(DSP_LIB)/Source/BasicMathFunctions/arm_mult_f32.c
|
|
SRC += $(DSP_LIB)/Source/TransformFunctions/arm_rfft_fast_f32.c
|
|
SRC += $(DSP_LIB)/Source/TransformFunctions/arm_cfft_f32.c
|
|
SRC += $(DSP_LIB)/Source/TransformFunctions/arm_rfft_fast_init_f32.c
|
|
SRC += $(DSP_LIB)/Source/TransformFunctions/arm_cfft_radix8_f32.c
|
|
SRC += $(DSP_LIB)/Source/CommonTables/arm_common_tables.c
|
|
|
|
SRC += $(DSP_LIB)/Source/ComplexMathFunctions/arm_cmplx_mag_f32.c
|
|
SRC += $(DSP_LIB)/Source/StatisticsFunctions/arm_max_f32.c
|
|
|
|
SRC += $(wildcard $(DSP_LIB)/Source/*/*.S)
|
|
endif
|
|
|
|
ifneq ($(filter ONBOARDFLASH,$(FEATURES)),)
|
|
SRC += \
|
|
drivers/flash.c \
|
|
drivers/flash_m25p16.c \
|
|
drivers/flash_w25n01g.c \
|
|
drivers/flash_w25m.c \
|
|
io/flashfs.c \
|
|
pg/flash.c \
|
|
$(MSC_SRC)
|
|
endif
|
|
|
|
SRC += $(COMMON_SRC)
|
|
|
|
#excludes
|
|
SRC := $(filter-out $(MCU_EXCLUDES), $(SRC))
|
|
|
|
ifneq ($(filter SDCARD_SPI,$(FEATURES)),)
|
|
SRC += \
|
|
drivers/sdcard.c \
|
|
drivers/sdcard_spi.c \
|
|
drivers/sdcard_standard.c \
|
|
io/asyncfatfs/asyncfatfs.c \
|
|
io/asyncfatfs/fat_standard.c \
|
|
$(MSC_SRC)
|
|
endif
|
|
|
|
ifneq ($(filter SDCARD_SDIO,$(FEATURES)),)
|
|
SRC += \
|
|
drivers/sdcard.c \
|
|
drivers/sdcard_sdio_baremetal.c \
|
|
drivers/sdcard_standard.c \
|
|
io/asyncfatfs/asyncfatfs.c \
|
|
io/asyncfatfs/fat_standard.c \
|
|
pg/sdio.c \
|
|
$(MSC_SRC)
|
|
endif
|
|
|
|
ifneq ($(filter VCP,$(FEATURES)),)
|
|
SRC += $(VCP_SRC)
|
|
endif
|
|
|
|
ifneq ($(filter MSC,$(FEATURES)),)
|
|
SRC += $(MSC_SRC)
|
|
endif
|
|
# end target specific make file checks
|
|
|
|
# Search path and source files for the ST stdperiph library
|
|
VPATH := $(VPATH):$(STDPERIPH_DIR)/src
|