Open Source Flight Controller Firmware

betaflightcleanflightflight-controllerhacktoberfest

timecop@gmail.com f2a931d248 OLIMEXINO - Initial support for the OLIMEXINO board. ... PWM and ADC configuration is the same as the naze32 for now. Requires an accelerometer is connected via I2C2. I2C signals SDA2 and SCL2 are on the UEXT header (Pins 6 and 5 respectively) USART signals TX and RX are on the CON3/CON4 headers (TX = D7, RX = D8) Onboard LEDs (LED1/LED2) working. Buzzer support removed for now as it conflicted with PWM map and LEDs. mma845x support disabled as it conflicted with an LED. Relocated some NAZE specific comments. git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@302 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61		2013-04-07 13:18:37 +00:00
lib	Applied patch from trunet for running at 64MHz off HSI for broken Chinese kcopter clones	2012-10-06 14:40:24 +00:00
obj	added some more configurable frobs to cli. commit before 2.2 merge.	2013-03-11 06:18:20 +00:00
src	OLIMEXINO - Initial support for the OLIMEXINO board.	2013-04-07 13:18:37 +00:00
support	corrected short options for getopt.	2013-02-16 11:16:53 +00:00
baseflight.uvproj	added MSP_UID patch from cGiessen	2013-03-04 00:17:50 +00:00
JLinkSettings.ini	imported STM32 multiwii port into baseflight dir	2012-02-16 09:39:58 +00:00
Makefile	OLIMEXINO - Initial support for the OLIMEXINO board.	2013-04-07 13:18:37 +00:00
stm32_flash.ld	added test driver for software i2c. disabled by default. no, that wasn't the cause of cycletime jumps.	2012-07-14 02:00:39 +00:00