Bsongis/sport power line on off (#7435)

SmartPort Power

radio/src/datastructs.h

@@ -783,7 +783,7 @@ PACK(struct RadioData {
   NOBACKUP(uint8_t  disableRssiPoweroffAlarm:1);
   NOBACKUP(uint8_t  USBMode:2);
   NOBACKUP(uint8_t  jackMode:2);
-  NOBACKUP(uint8_t  spare3:1);
+  NOBACKUP(uint8_t  sportUpdatePower:1);
   NOBACKUP(char     ttsLanguage[2]);
   NOBACKUP(int8_t   beepVolume:4);
   NOBACKUP(int8_t   wavVolume:4);

radio/src/gui/480x272/radio_hardware.cpp

@@ -72,6 +72,9 @@ enum MenuRadioHardwareItems {
 #endif
 
   ITEM_RADIO_HARDWARE_JITTER_FILTER,
+#if defined(SPORT_UPDATE_PWR_GPIO)
+  ITEM_RADIO_HARDWARE_SPORT_UPDATE_POWER,
+#endif
   ITEM_RADIO_HARDWARE_DEBUG,
   ITEM_RADIO_HARDWARE_MAX
 };
@@ -119,6 +122,12 @@ void onHardwareAntennaSwitchConfirm(const char * result)
   #define MAX_BAUDRATE_ROW          HIDDEN_ROW
 #endif
 
+#if defined(SPORT_UPDATE_PWR_GPIO)
+  #define SPORT_POWER_ROWS 0,
+#else
+  #define SPORT_POWER_ROWS
+#endif
+
 bool menuRadioHardware(event_t event)
 {
   MENU(STR_HARDWARE, RADIO_ICONS, menuTabGeneral, MENU_RADIO_HARDWARE, ITEM_RADIO_HARDWARE_MAX, {
@@ -148,6 +157,7 @@ bool menuRadioHardware(event_t event)
 
     AUX_SERIAL_ROW /* aux serial mode */
     0, /* ADC filter */
+    SPORT_POWER_ROWS
     1, /* Debug */
   });
 
@@ -365,6 +375,16 @@ bool menuRadioHardware(event_t event)
         break;
       }
 
+#if defined(SPORT_UPDATE_PWR_GPIO)
+      case ITEM_RADIO_HARDWARE_SPORT_UPDATE_POWER:
+        lcdDrawText(MENUS_MARGIN_LEFT, y, STR_SPORT_UPDATE_POWER_MODE);
+        g_eeGeneral.sportUpdatePower = editChoice(HW_SETTINGS_COLUMN + 50, y, STR_SPORT_UPDATE_POWER_MODES, g_eeGeneral.sportUpdatePower, 0, 1, attr, event);
+        if (attr && checkIncDec_Ret) {
+          SPORT_UPDATE_POWER_INIT();
+        }
+        break;
+#endif
+
       case ITEM_RADIO_HARDWARE_DEBUG:
         lcdDrawText(MENUS_MARGIN_LEFT, y, STR_DEBUG);
         lcdDrawText(HW_SETTINGS_COLUMN + 50, y, STR_ANALOGS_BTN, menuHorizontalPosition == 0 ? attr : 0);

radio/src/gui/common/stdlcd/radio_hardware.cpp

@@ -184,6 +184,9 @@ enum {
 
   ITEM_RADIO_HARDWARE_JITTER_FILTER,
   ITEM_RADIO_HARDWARE_RAS,
+#if defined(SPORT_UPDATE_PWR_GPIO)
+  ITEM_RADIO_HARDWARE_SPORT_UPDATE_POWER,
+#endif
   ITEM_RADIO_HARDWARE_DEBUG,
 #if defined(EEPROM_RLC)
   ITEM_RADIO_BACKUP_EEPROM,
@@ -295,6 +298,12 @@ void onHardwareAntennaSwitchConfirm(const char * result)
   #define HW_SETTINGS_COLUMN2            (HW_SETTINGS_COLUMN1 + 5*FW)
 #endif
 
+#if defined(SPORT_UPDATE_PWR_GPIO)
+  #define SPORT_POWER_ROWS 0,
+#else
+  #define SPORT_POWER_ROWS
+#endif
+
 #if defined(EEPROM_RLC)
 void onFactoryResetConfirm(const char * result)
 {
@@ -334,7 +343,7 @@ void menuRadioHardware(event_t event)
 
     0 /* ADC filter */,
     READONLY_ROW /* RAS */,
-
+    SPORT_POWER_ROWS
     1 /* debugs */,
 
     0,
@@ -631,6 +640,14 @@ void menuRadioHardware(event_t event)
         else
           lcdDrawText(lcdNextPos, y, "---");
         break;
+#if defined(SPORT_UPDATE_PWR_GPIO)
+      case ITEM_RADIO_HARDWARE_SPORT_UPDATE_POWER:
+        g_eeGeneral.sportUpdatePower = editChoice(HW_SETTINGS_COLUMN2, y, STR_SPORT_UPDATE_POWER_MODE, STR_SPORT_UPDATE_POWER_MODES, g_eeGeneral.sportUpdatePower, 0, 1, attr, event);
+        if (attr && checkIncDec_Ret) {
+          SPORT_UPDATE_POWER_INIT();
+        }
+        break;
+#endif
 
       case ITEM_RADIO_HARDWARE_DEBUG:
         lcdDrawTextAlignedLeft(y, STR_DEBUG);

radio/src/io/frsky_firmware_update.cpp

@@ -487,6 +487,7 @@ const char * FrskyDeviceFirmwareUpdate::flashFirmware(const char * filename)
   uint8_t extPwr = IS_EXTERNAL_MODULE_ON();
   EXTERNAL_MODULE_OFF();
 
+  uint8_t spuPwr = IS_SPORT_UPDATE_POWER_ON();
   SPORT_UPDATE_POWER_OFF();
 
   drawProgressScreen(getBasename(filename), STR_DEVICE_RESET, 0, 0);
@@ -531,6 +532,10 @@ const char * FrskyDeviceFirmwareUpdate::flashFirmware(const char * filename)
     setupPulsesExternalModule();
   }
 
+  if (spuPwr) {
+    SPORT_UPDATE_POWER_ON();
+  }
+
   state = SPORT_IDLE;
   resumePulses();
 
@@ -752,6 +757,7 @@ const char * FrskyChipFirmwareUpdate::flashFirmware(const char * filename, bool
   uint8_t extPwr = IS_EXTERNAL_MODULE_ON();
   EXTERNAL_MODULE_OFF();
 
+  uint8_t spuPwr = IS_SPORT_UPDATE_POWER_ON();
   SPORT_UPDATE_POWER_OFF();
 
   if (wait) {
@@ -791,6 +797,10 @@ const char * FrskyChipFirmwareUpdate::flashFirmware(const char * filename, bool
     setupPulsesExternalModule();
   }
 
+  if (spuPwr) {
+    SPORT_UPDATE_POWER_ON();
+  }
+
   resumePulses();
 
   return result;

radio/src/io/multi_firmware_update.cpp

@@ -528,6 +528,7 @@ bool multiFlashFirmware(uint8_t moduleIdx, const char * filename)
   uint8_t extPwr = IS_EXTERNAL_MODULE_ON();
   EXTERNAL_MODULE_OFF();
 
+  uint8_t spuPwr = IS_SPORT_UPDATE_POWER_ON();
   SPORT_UPDATE_POWER_OFF();
 
   drawProgressScreen(getBasename(filename), STR_DEVICE_RESET, 0, 0);
@@ -575,6 +576,10 @@ bool multiFlashFirmware(uint8_t moduleIdx, const char * filename)
     setupPulsesExternalModule();
   }
 
+  if (spuPwr) {
+    SPORT_UPDATE_POWER_ON();
+  }
+
   resumePulses();
 
   return result == nullptr;

radio/src/opentx.cpp

@@ -1966,6 +1966,10 @@ void opentxInit()
   btInit();
 #endif
 
+#if defined(SPORT_UPDATE_PWR_GPIO)
+  SPORT_UPDATE_POWER_INIT();
+#endif
+
 #if defined(COLORLCD)
   loadTheme();
   loadFontCache();

radio/src/targets/horus/board.cpp

@@ -74,6 +74,14 @@ void sportUpdatePowerOff()
 {
   GPIO_ResetBits(SPORT_UPDATE_PWR_GPIO, SPORT_UPDATE_PWR_GPIO_PIN);
 }
+
+void sportUpdatePowerInit()
+{
+  if (g_eeGeneral.sportUpdatePower == 1)
+    sportUpdatePowerOn();
+  else
+    sportUpdatePowerOff();
+}
 #endif
 
 void boardInit()

radio/src/targets/horus/board.h

@@ -599,11 +599,16 @@ void telemetryPortInvertedInit(uint32_t baudrate);
 #if HAS_SPORT_UPDATE_CONNECTOR()
 void sportUpdatePowerOn();
 void sportUpdatePowerOff();
+void sportUpdatePowerInit();
 #define SPORT_UPDATE_POWER_ON()        sportUpdatePowerOn()
 #define SPORT_UPDATE_POWER_OFF()       sportUpdatePowerOff()
+#define SPORT_UPDATE_POWER_INIT()      sportUpdatePowerInit()
+#define IS_SPORT_UPDATE_POWER_ON()     (GPIO_ReadInputDataBit(SPORT_UPDATE_PWR_GPIO, SPORT_UPDATE_PWR_GPIO_PIN) == Bit_SET)
 #else
 #define SPORT_UPDATE_POWER_ON()
 #define SPORT_UPDATE_POWER_OFF()
+#define SPORT_UPDATE_POWER_INIT()
+#define IS_SPORT_UPDATE_POWER_ON()     (false)
 #endif
 
 // Second serial port driver

radio/src/targets/simu/simpgmspace.cpp

@@ -437,6 +437,10 @@ void sportUpdatePowerOff()
 {
 }
 
+void sportUpdatePowerInit()
+{
+}
+
 void boardInit()
 {
 }

radio/src/targets/taranis/board.cpp

@@ -62,6 +62,14 @@ void sportUpdatePowerOff()
 {
   GPIO_SPORT_UPDATE_PWR_GPIO_OFF(SPORT_UPDATE_PWR_GPIO, SPORT_UPDATE_PWR_GPIO_PIN);
 }
+
+void sportUpdatePowerInit()
+{
+  if (g_eeGeneral.sportUpdatePower == 1)
+    sportUpdatePowerOn();
+  else
+    sportUpdatePowerOff();
+}
 #endif
 
 void boardInit()

radio/src/targets/taranis/board.h

@@ -720,12 +720,17 @@ void telemetryPortInvertedInit(uint32_t baudrate);
 void sportUpdateInit();
 void sportUpdatePowerOn();
 void sportUpdatePowerOff();
+void sportUpdatePowerInit();
 #define SPORT_UPDATE_POWER_ON()         sportUpdatePowerOn()
 #define SPORT_UPDATE_POWER_OFF()        sportUpdatePowerOff()
+#define SPORT_UPDATE_POWER_INIT()       sportUpdatePowerInit()
+#define IS_SPORT_UPDATE_POWER_ON()      (GPIO_ReadInputDataBit(SPORT_UPDATE_PWR_GPIO, SPORT_UPDATE_PWR_GPIO_PIN) == Bit_SET)
 #else
 #define sportUpdateInit()
 #define SPORT_UPDATE_POWER_ON()
 #define SPORT_UPDATE_POWER_OFF()
+#define SPORT_UPDATE_POWER_INIT()
+#define IS_SPORT_UPDATE_POWER_ON()      (false)
 #endif
 
 // Audio driver

radio/src/translations.cpp

@@ -78,6 +78,7 @@ ISTR(SWTYPES);
 ISTR(POTTYPES);
 ISTR(SLIDERTYPES);
 ISTR(ANTENNA_MODES);
+ISTR(SPORT_UPDATE_POWER_MODES);
 
 #if defined(PCBSKY9X) && defined(REVX)
 ISTR(VOUTPUT_TYPE);
@@ -580,6 +581,7 @@ const char STR_RTC_CHECK[]  = TR_RTC_CHECK;
 const char STR_EXIT[] = TR_EXIT;
 const char STR_MODULE_RANGE[] = TR_MODULE_RANGE;
 const char STR_RECEIVER_OPTIONS[] = TR_RECEIVER_OPTIONS;
+const char STR_SPORT_UPDATE_POWER_MODE[] = TR_SPORT_UPDATE_POWER_MODE;
 
 #if defined(PCBHORUS)
 const char STR_ASSIGN_SPLASH[] = TR_ASSIGN_SPLASH;

radio/src/translations.h

@@ -863,6 +863,8 @@ extern const char STR_MENU_OTHER[];
 extern const char STR_MENU_INVERT[];
 extern const char STR_JITTER_FILTER[];
 extern const char STR_RTC_CHECK[];
+extern const char STR_SPORT_UPDATE_POWER_MODE[];
+extern const char STR_SPORT_UPDATE_POWER_MODES[];
 
 #if MENUS_LOCK == 1
   extern const char STR_UNLOCKED[];

radio/src/translations/cz.h.txt

@@ -980,6 +980,9 @@
 #define STR_FACTORYRESET               "Tovární reset"
 #define TR_CONFIRMRESET                TR("Smazat vše ?", "Smazat modely a nastavení?")
 #define TR_TOO_MANY_LUA_SCRIPTS        "Příliš mnoho skriptů!"
+#define TR_SPORT_UPDATE_POWER_MODE     "SP Power"
+#define LEN_SPORT_UPDATE_POWER_MODES   "\004"
+#define TR_SPORT_UPDATE_POWER_MODES    "AUTO""ON\0 "
 
 // Horus and Taranis column headers
 #define TR_PHASES_HEADERS_NAME         "Název"

radio/src/translations/de.h.txt

@@ -986,6 +986,9 @@
 #define STR_FACTORYRESET                TR("Werksreset", "Auf Werkseinstellungen")
 #define TR_CONFIRMRESET                 TR("Alles löschen? ","ALLE Modelle+Einst. löschen?")
 #define TR_TOO_MANY_LUA_SCRIPTS         "Zu viele Skripte!"
+#define TR_SPORT_UPDATE_POWER_MODE      "SP Power"
+#define LEN_SPORT_UPDATE_POWER_MODES    "\004"
+#define TR_SPORT_UPDATE_POWER_MODES     "AUTO""ON\0 "
 
 // Horus and Taranis specific column headers
 #define TR_PHASES_HEADERS_NAME         "Name "

radio/src/translations/en.h.txt

@@ -985,6 +985,9 @@
 #define STR_FACTORYRESET               "Factory reset"
 #define TR_CONFIRMRESET                TR("Erase ALL", "Erase ALL models and settings?")
 #define TR_TOO_MANY_LUA_SCRIPTS         "Too many Lua scripts!"
+#define TR_SPORT_UPDATE_POWER_MODE     "SP Power"
+#define LEN_SPORT_UPDATE_POWER_MODES   "\004"
+#define TR_SPORT_UPDATE_POWER_MODES    "AUTO""ON\0 "
 
 // Horus and Taranis column headers
 #define TR_PHASES_HEADERS_NAME         "Name"

radio/src/translations/es.h.txt

@@ -1005,6 +1005,9 @@
 #define STR_FACTORYRESET       "Factory reset"
 #define TR_CONFIRMRESET        "Erase ALL models and settings?"
 #define TR_TOO_MANY_LUA_SCRIPTS "Too many Lua scripts!"
+#define TR_SPORT_UPDATE_POWER_MODE     "SP Power"
+#define LEN_SPORT_UPDATE_POWER_MODES   "\004"
+#define TR_SPORT_UPDATE_POWER_MODES    "AUTO""ON\0 "
 
 
 // Horus and Taranis column headers

radio/src/translations/fi.h.txt

@@ -999,6 +999,9 @@
 #define STR_FACTORYRESET        "Factory reset"
 #define TR_CONFIRMRESET        "Erase ALL models and settings?"
 #define TR_TOO_MANY_LUA_SCRIPTS "Too many Lua scripts!"
+#define TR_SPORT_UPDATE_POWER_MODE     "SP Power"
+#define LEN_SPORT_UPDATE_POWER_MODES   "\004"
+#define TR_SPORT_UPDATE_POWER_MODES    "AUTO""ON\0 "
 
 
 // Horus and Taranis column headers

radio/src/translations/fr.h.txt

@@ -1009,6 +1009,9 @@
 #endif
 #define TR_CONFIRMRESET                TR("Effacer TOUT?","Effacer TOUS modèles/réglages?")
 #define TR_TOO_MANY_LUA_SCRIPTS         "Trop de scripts lua!"
+#define TR_SPORT_UPDATE_POWER_MODE     "SP Power"
+#define LEN_SPORT_UPDATE_POWER_MODES   "\004"
+#define TR_SPORT_UPDATE_POWER_MODES    "AUTO""ON\0 "
 
 // Horus and Taranis column headers
 #define TR_PHASES_HEADERS_NAME         "Nom"

radio/src/translations/it.h.txt

@@ -1001,6 +1001,9 @@
 #define STR_FACTORYRESET       "Inizializza dati"
 #define TR_CONFIRMRESET        "Resettare TUTTI i dati?"
 #define TR_TOO_MANY_LUA_SCRIPTS "Troppi Scripts Lua!"
+#define TR_SPORT_UPDATE_POWER_MODE     "SP Power"
+#define LEN_SPORT_UPDATE_POWER_MODES   "\004"
+#define TR_SPORT_UPDATE_POWER_MODES    "AUTO""ON\0 "
 
 
 // Horus and Taranis column headers

radio/src/translations/nl.h.txt

@@ -993,6 +993,9 @@
 #endif
 #define TR_CONFIRMRESET        TR("Wis Alles?", "Wis ALLE modellen en instellingen?")
 #define TR_TOO_MANY_LUA_SCRIPTS "Te veel Lua scripts!"
+#define TR_SPORT_UPDATE_POWER_MODE     "SP Power"
+#define LEN_SPORT_UPDATE_POWER_MODES   "\004"
+#define TR_SPORT_UPDATE_POWER_MODES    "AUTO""ON\0 "
 
 
 // Horus and Taranis column headers

radio/src/translations/pl.h.txt

@@ -1000,6 +1000,9 @@
 #define STR_FACTORYRESET        "Ustaw.Fabrycz"
 #define TR_CONFIRMRESET        "WYkasować wszytkie modele?    "
 #define TR_TOO_MANY_LUA_SCRIPTS "Za dużo skryptów Lua!"
+#define TR_SPORT_UPDATE_POWER_MODE     "SP Power"
+#define LEN_SPORT_UPDATE_POWER_MODES   "\004"
+#define TR_SPORT_UPDATE_POWER_MODES    "AUTO""ON\0 "
 
 
 // Horus and Taranis column headers

radio/src/translations/pt.h.txt

@@ -990,6 +990,9 @@
 #define STR_FACTORYRESET       "Factory reset"
 #define TR_CONFIRMRESET        "Erase ALL models and settings?"
 #define TR_TOO_MANY_LUA_SCRIPTS "Too many Lua scripts!"
+#define TR_SPORT_UPDATE_POWER_MODE     "SP Power"
+#define LEN_SPORT_UPDATE_POWER_MODES   "\004"
+#define TR_SPORT_UPDATE_POWER_MODES    "AUTO""ON\0 "
 
 
 // Horus and Taranis column headers

radio/src/translations/se.h.txt

@@ -1000,6 +1000,9 @@
 #define STR_FACTORYRESET        "Factory reset"
 #define TR_CONFIRMRESET        "Erase ALL models and settings?"
 #define TR_TOO_MANY_LUA_SCRIPTS "För många Lua-scripts!"
+#define TR_SPORT_UPDATE_POWER_MODE     "SP Power"
+#define LEN_SPORT_UPDATE_POWER_MODES   "\004"
+#define TR_SPORT_UPDATE_POWER_MODES    "AUTO""ON\0 "
 
 
 // Horus and Taranis column headers