borisbstyle
34c6077b5c
Yaw Expo Feature
2015-05-22 21:37:01 +02:00
Dominic Clifton
0f95f4ec4c
Improve MSP handling of servo configuration. Fixes backup of CJMCU
...
boards.
2015-05-07 22:47:32 +01:00
Dominic Clifton
244685c9a6
Update version checking code to use semantic versioning - see
...
http://semver.org/
semver.js creating using browserify.
https://www.brcdn.org/?module=semver&version=4.3.4
2015-05-07 22:10:26 +01:00
Mauro Mombelli
e781e14617
fix for undefined function
...
ArrayBuffer does NOT have length but byteLength parameter.
2015-04-28 10:20:48 +02:00
Dominic Clifton
045d2b0ca4
Use updated IDs for MSP_LOOP_TIME and MSP_SET_LOOP_TIME. Cleanup and
...
fix backup/restore arming config. Backup restore/looptime. Add config
migration of looptime and arming config. Rename MSP_RCMAP to
MSP_RX_MAP to match cleanflight code.
2015-03-29 15:01:54 +01:00
Dominic Clifton
2e046db53e
Ensure offset variable is updated consistently in MSP_MISC.
...
See 9261163ca2
2015-03-29 12:06:33 +01:00
tricopterY
54c5d9b44c
Reworked msp.js - MSP_ARMING_CONFIG, MSP_SET_ARMING_CONFIG
2015-03-29 08:58:01 +11:00
tricopterY
a1f932f36a
Reworked msp.js - new code MSP_ARM_CONFIG etc
2015-03-18 14:46:24 +11:00
tricopterY
9261163ca2
Reworked msp.js
...
MISC.auto_disarm_delay, MISC.disarm_kill_switch are CONFIG.apiVersion dependent
2015-03-15 17:04:40 +11:00
tricopterY
fde8edfe1e
MISC auto_disarm_delay and disarm_kill_switch
2015-03-14 11:17:30 +11:00
Nicholas Sherlock
2863077ee3
Merge remote-tracking branch 'upstream/development' into development
2015-03-14 10:19:24 +13:00
Dominic Clifton
4b2704e784
Support independent configuration of pitch and roll rates. Cleanup of
...
tpa breakpoint configuration support.
2015-03-11 22:50:07 +00:00
tricopterY
6380a7a821
Merge pull request #8 from tricopterY/development
...
development sync
2015-03-11 14:07:33 +11:00
tricopterY
2b5296884a
Update msp.js
...
Added TPA Breakpoint handling via PID Tuning tab
2015-03-10 14:51:23 +11:00
Nicholas Sherlock
b331315b76
Add 250000 baudrate for blackbox
2015-03-07 13:07:32 +13:00
Nicholas Sherlock
aa8d5300e5
Support new Blackbox baudrates including new 230400 rate
2015-03-06 19:58:57 +13:00
Dominic Clifton
24dba62144
First working cut of new port configuration tab.
...
Migration from or configuration of pre 1.8.x firmware is not supported
but may be added later.
2015-03-03 22:56:48 +00:00
Dominic Clifton
f3e14b73a2
Merge remote-tracking branch 'cleanflight/development' into serial-cleanup
2015-03-03 18:27:58 +00:00
Dominic Clifton
9ba21f773f
Fix servo channel forwarding configuration. Closes #117 .
...
Editor mishap during refactoring in
34d72feb69
2015-02-27 10:52:56 +00:00
Dominic Clifton
bbab895dd8
Merge branch 'development' into serial-cleanup
2015-02-27 01:16:44 +00:00
Dominic Clifton
c423aaf44d
work-in-progress changes to go with the corresponding serial-cleanup
...
firmware branch.
2015-02-27 01:15:37 +00:00
Nicholas Sherlock
289719b81a
Merge remote-tracking branch 'upstream/development' into development
2015-02-27 00:45:01 +13:00
Nicholas Sherlock
66e767881e
Fix endianness of board version read
2015-02-23 22:47:47 +13:00
Nicholas Sherlock
d0ae8dd921
Show "dataflash unsupported" for old versions missing new MSP commands
2015-02-16 19:13:09 +13:00
Nicholas Sherlock
7fb9f43b00
Merge remote-tracking branch 'upstream/development' into blackbox-flash
2015-02-16 17:45:47 +13:00
Nicholas Sherlock
49741b45a8
Add progress dialogs for flash save and erase
2015-02-13 21:05:36 +13:00
Dominic Clifton
34d72feb69
Move handling of servo channel forwarding into the MSP.
2015-02-10 01:12:26 +00:00
Dominic Clifton
6901aa2dbc
Cleanup serial port count code.
2015-02-08 23:16:17 +00:00
Dominic Clifton
cfe6949c84
Allow same rnage of values for board alignment as cli (-180 - 360)
2015-02-02 00:08:09 +00:00
Nicholas Sherlock
0f22b92e35
Add dataflash tab: Very basic functionality is working
2015-01-31 00:41:41 +13:00
tracernz
c78bd800db
Fix MSP_GPS_SV_INFO comment
...
Depends on #437
2015-01-29 19:26:42 +01:00
Dominic Clifton
e96839d3d8
Merge pull request #80 from ledvinap/feature-negative-current
...
Allow negative current draw
2015-01-29 18:29:01 +01:00
Dominic Clifton
35200e5a36
Support changing PID controller in the GUI.
2015-01-29 18:27:50 +01:00
Dominic Clifton
aaab850407
Change MSP_SONAR_ALTITUDE to be in the range used for cleanflight
...
original commands.
See
https://code.google.com/p/multiwii/source/browse/trunk/MultiWii_shared/Protocol.cpp#18
2015-01-29 15:29:12 +01:00
Krzysztof Rosinski
f933dbf330
Sonar altitude added to sensors
2015-01-28 22:24:44 +01:00
Petr Ledvina
943d33ba4d
Allow negative current draw
...
Interpret MSP_ANALOG.amperage value as signed
2015-01-28 17:15:23 +01:00
Dominic Clifton
342a5134a5
Merge branch 'feature-negative-currentsensors' of https://github.com/frog32/cleanflight-configurator into frog32-feature-negative-currentsensors
2015-01-26 19:01:01 +01:00
Dominic Clifton
994b04b0aa
Add support for LED strip 'color' mode.
2015-01-25 16:22:57 +01:00
Marc Egli
126beedf9c
Allow negative current scales and allow an offset between 0 and 3.3V
2015-01-23 12:01:52 +01:00
Dominic Clifton
a5de593da7
Allow LED strip colors to be used. Requires new firmware.
...
At the moment colors are only used by the thrust ring mode.
2015-01-23 02:12:20 +01:00
Dominic Clifton
8c10f39606
Add support for backup and restore of led strip config.
...
Various minor code cleanups.
2015-01-19 20:41:41 +01:00
Dominic Clifton
519de30f6e
Allow saving of LED Strip configuratiion via MSP. Requires firmware
...
with new MSP_SET_LED_STRIP_CONFIG.
Remove some .toUpperCase() duplication since it was only needed for the
CLI commands panel.
Minor CSS cleanups.
Some variable and class renaming to align with firmware code.
2015-01-16 00:15:41 +00:00
Dominic Clifton
683e68b036
Add support for MSP_LED_STRIP_CONFIG.
2015-01-08 23:21:17 +00:00
Dominic Clifton
835e665017
Fix 'unknown code' messages in console log.
2015-01-07 20:15:21 +00:00
Dominic Clifton
eda54f13db
Update RSSI channel configuration.
2015-01-07 13:51:08 +00:00
Dominic Clifton
d671bff583
First cut of functional 'Ports' tab. Support backup and restore of
...
serial port scenarios and baud rates. Add note to 'features' tab.
2015-01-03 00:58:52 +00:00
Dominic Clifton
32820853ce
Updating to use API version 1.1.
2015-01-02 19:31:50 +00:00
Dominic Clifton
502cf718ab
Update backup/restore functionality so that it restores adjustments,
...
auxiliary settings and channel forwarding (per-profile). Add "Warning
Cell Voltage" to the UI.
2014-12-21 12:29:36 +00:00
Dominic Clifton
7692b7354a
Update configuration for Cleanflight settings.
2014-12-20 02:50:36 +00:00
Dominic Clifton
a8cf910f51
Merge remote-tracking branch 'multiwii/master'
...
Conflicts:
README.md
_locales/en/messages.json
changelog.html
js/backup_restore.js
js/data_storage.js
js/msp.js
js/protocols/stm32.js
js/serial_backend.js
main.css
main.html
main.js
manifest.json
tabs/auxiliary_configuration.css
tabs/default.css
tabs/firmware_flasher.js
tabs/initial_setup.css
tabs/initial_setup.html
tabs/initial_setup.js
tabs/modes.html
tabs/modes.js
tabs/motor_outputs.css
tabs/motors.html
tabs/receiver.css
tabs/servos.js
2014-12-18 22:40:03 +00:00
