Mirror/inav-configurator
1
0
Fork 0
mirror of https://github.com/iNavFlight/inav-configurator.git synced 2025-07-15 04:15:28 +03:00
Code Wiki Activity
inav-configurator/js/msp.js
Dominic Clifton 687c0f1a84 Remove legacy servo configuration which originated from the overloaded 
use of the servo 'rate'.  All servos are free to be configured
regardless of whether the mixer actually uses those servos.
2015-07-13 02:01:19 +01:00

1394 lines
56 KiB
JavaScript
Raw Blame History

'use strict';
// MSP_codes needs to be re-integrated inside MSP object
var MSP_codes = {
MSP_API_VERSION: 1,
MSP_FC_VARIANT: 2,
MSP_FC_VERSION: 3,
MSP_BOARD_INFO: 4,
MSP_BUILD_INFO: 5,
// MSP commands for Cleanflight original features
MSP_CHANNEL_FORWARDING: 32,
MSP_SET_CHANNEL_FORWARDING: 33,
MSP_MODE_RANGES: 34,
MSP_SET_MODE_RANGE: 35,
MSP_LED_STRIP_CONFIG: 48,
MSP_SET_LED_STRIP_CONFIG: 49,
MSP_ADJUSTMENT_RANGES: 52,
MSP_SET_ADJUSTMENT_RANGE: 53,
MSP_CF_SERIAL_CONFIG: 54,
MSP_SET_CF_SERIAL_CONFIG: 55,
MSP_SONAR: 58,
MSP_PID_CONTROLLER: 59,
MSP_SET_PID_CONTROLLER: 60,
MSP_ARMING_CONFIG: 61,
MSP_SET_ARMING_CONFIG: 62,
MSP_DATAFLASH_SUMMARY: 70,
MSP_DATAFLASH_READ: 71,
MSP_DATAFLASH_ERASE: 72,
MSP_LOOP_TIME: 73,
MSP_SET_LOOP_TIME: 74,
// Multiwii MSP commands
MSP_IDENT: 100,
MSP_STATUS: 101,
MSP_RAW_IMU: 102,
MSP_SERVO: 103,
MSP_MOTOR: 104,
MSP_RC: 105,
MSP_RAW_GPS: 106,
MSP_COMP_GPS: 107,
MSP_ATTITUDE: 108,
MSP_ALTITUDE: 109,
MSP_ANALOG: 110,
MSP_RC_TUNING: 111,
MSP_PID: 112,
MSP_BOX: 113,
MSP_MISC: 114,
MSP_MOTOR_PINS: 115,
MSP_BOXNAMES: 116,
MSP_PIDNAMES: 117,
MSP_WP: 118,
MSP_BOXIDS: 119,
MSP_SERVO_CONFIGURATIONS: 120,
MSP_SET_RAW_RC: 200,
MSP_SET_RAW_GPS: 201,
MSP_SET_PID: 202,
MSP_SET_BOX: 203,
MSP_SET_RC_TUNING: 204,
MSP_ACC_CALIBRATION: 205,
MSP_MAG_CALIBRATION: 206,
MSP_SET_MISC: 207,
MSP_RESET_CONF: 208,
MSP_SET_WP: 209,
MSP_SELECT_SETTING: 210,
MSP_SET_HEAD: 211,
MSP_SET_SERVO_CONFIGURATION: 212,
MSP_SET_MOTOR: 214,
// MSP_BIND: 240,
MSP_SERVO_MIX_RULES: 241,
MSP_SET_SERVO_MIX_RULE: 242,
MSP_EEPROM_WRITE: 250,
MSP_DEBUGMSG: 253,
MSP_DEBUG: 254,
// Additional baseflight commands that are not compatible with MultiWii
MSP_UID: 160, // Unique device ID
MSP_ACC_TRIM: 240, // get acc angle trim values
MSP_SET_ACC_TRIM: 239, // set acc angle trim values
MSP_GPS_SV_INFO: 164, // get Signal Strength
// Additional private MSP for baseflight configurator (yes thats us \o/)
MSP_RX_MAP: 64, // get channel map (also returns number of channels total)
MSP_SET_RX_MAP: 65, // set rc map, numchannels to set comes from MSP_RX_MAP
MSP_BF_CONFIG: 66, // baseflight-specific settings that aren't covered elsewhere
MSP_SET_BF_CONFIG: 67, // baseflight-specific settings save
MSP_SET_REBOOT: 68, // reboot settings
MSP_BF_BUILD_INFO: 69 // build date as well as some space for future expansion
};
var MSP = {
state: 0,
message_direction: 1,
code: 0,
message_length_expected: 0,
message_length_received: 0,
message_buffer: null,
message_buffer_uint8_view: null,
message_checksum: 0,
callbacks: [],
packet_error: 0,
ledDirectionLetters: ['n', 'e', 's', 'w', 'u', 'd'], // in LSB bit order
ledFunctionLetters: ['i', 'w', 'f', 'a', 't', 'r', 'c'], // in LSB bit order
supportedBaudRates: [ // 0 based index.
'AUTO',
'9600',
'19200',
'38400',
'57600',
'115200',
'230400',
'250000',
],
serialPortFunctions: // in LSB bit order
['MSP', 'GPS', 'TELEMETRY_FRSKY', 'TELEMETRY_HOTT', 'TELEMETRY_MSP', 'TELEMETRY_SMARTPORT', 'RX_SERIAL', 'BLACKBOX'],
read: function (readInfo) {
var data = new Uint8Array(readInfo.data);
for (var i = 0; i < data.length; i++) {
switch (this.state) {
case 0: // sync char 1
if (data[i] == 36) { // $
this.state++;
}
break;
case 1: // sync char 2
if (data[i] == 77) { // M
this.state++;
} else { // restart and try again
this.state = 0;
}
break;
case 2: // direction (should be >)
if (data[i] == 62) { // >
this.message_direction = 1;
} else { // <
this.message_direction = 0;
}
this.state++;
break;
case 3:
this.message_length_expected = data[i];
this.message_checksum = data[i];
// setup arraybuffer
this.message_buffer = new ArrayBuffer(this.message_length_expected);
this.message_buffer_uint8_view = new Uint8Array(this.message_buffer);
this.state++;
break;
case 4:
this.code = data[i];
this.message_checksum ^= data[i];
if (this.message_length_expected > 0) {
// process payload
this.state++;
} else {
// no payload
this.state += 2;
}
break;
case 5: // payload
this.message_buffer_uint8_view[this.message_length_received] = data[i];
this.message_checksum ^= data[i];
this.message_length_received++;
if (this.message_length_received >= this.message_length_expected) {
this.state++;
}
break;
case 6:
if (this.message_checksum == data[i]) {
// message received, process
this.process_data(this.code, this.message_buffer, this.message_length_expected);
} else {
console.log('code: ' + this.code + ' - crc failed');
this.packet_error++;
$('span.packet-error').html(this.packet_error);
}
// Reset variables
this.message_length_received = 0;
this.state = 0;
break;
default:
console.log('Unknown state detected: ' + this.state);
}
}
},
process_data: function (code, message_buffer, message_length) {
var data = new DataView(message_buffer, 0); // DataView (allowing us to view arrayBuffer as struct/union)
switch (code) {
case MSP_codes.MSP_IDENT:
console.log('Using deprecated msp command: MSP_IDENT');
// Deprecated
CONFIG.version = parseFloat((data.getUint8(0) / 100).toFixed(2));
CONFIG.multiType = data.getUint8(1);
CONFIG.msp_version = data.getUint8(2);
CONFIG.capability = data.getUint32(3, 1);
break;
case MSP_codes.MSP_STATUS:
CONFIG.cycleTime = data.getUint16(0, 1);
CONFIG.i2cError = data.getUint16(2, 1);
CONFIG.activeSensors = data.getUint16(4, 1);
CONFIG.mode = data.getUint32(6, 1);
CONFIG.profile = data.getUint8(10);
sensor_status(CONFIG.activeSensors);
$('span.i2c-error').text(CONFIG.i2cError);
$('span.cycle-time').text(CONFIG.cycleTime);
break;
case MSP_codes.MSP_RAW_IMU:
// 512 for mpu6050, 256 for mma
// currently we are unable to differentiate between the sensor types, so we are goign with 512
SENSOR_DATA.accelerometer[0] = data.getInt16(0, 1) / 512;
SENSOR_DATA.accelerometer[1] = data.getInt16(2, 1) / 512;
SENSOR_DATA.accelerometer[2] = data.getInt16(4, 1) / 512;
// properly scaled
SENSOR_DATA.gyroscope[0] = data.getInt16(6, 1) * (4 / 16.4);
SENSOR_DATA.gyroscope[1] = data.getInt16(8, 1) * (4 / 16.4);
SENSOR_DATA.gyroscope[2] = data.getInt16(10, 1) * (4 / 16.4);
// no clue about scaling factor
SENSOR_DATA.magnetometer[0] = data.getInt16(12, 1) / 1090;
SENSOR_DATA.magnetometer[1] = data.getInt16(14, 1) / 1090;
SENSOR_DATA.magnetometer[2] = data.getInt16(16, 1) / 1090;
break;
case MSP_codes.MSP_SERVO:
var servoCount = message_length / 2;
var needle = 0;
for (var i = 0; i < servoCount; i++) {
SERVO_DATA[i] = data.getUint16(needle, 1);
needle += 2;
}
break;
case MSP_codes.MSP_MOTOR:
var motorCount = message_length / 2;
var needle = 0;
for (var i = 0; i < motorCount; i++) {
MOTOR_DATA[i] = data.getUint16(needle, 1);
needle += 2;
}
break;
case MSP_codes.MSP_RC:
RC.active_channels = message_length / 2;
for (var i = 0; i < RC.active_channels; i++) {
RC.channels[i] = data.getUint16((i * 2), 1);
}
break;
case MSP_codes.MSP_RAW_GPS:
GPS_DATA.fix = data.getUint8(0);
GPS_DATA.numSat = data.getUint8(1);
GPS_DATA.lat = data.getInt32(2, 1);
GPS_DATA.lon = data.getInt32(6, 1);
GPS_DATA.alt = data.getUint16(10, 1);
GPS_DATA.speed = data.getUint16(12, 1);
GPS_DATA.ground_course = data.getUint16(14, 1);
break;
case MSP_codes.MSP_COMP_GPS:
GPS_DATA.distanceToHome = data.getUint16(0, 1);
GPS_DATA.directionToHome = data.getUint16(2, 1);
GPS_DATA.update = data.getUint8(4);
break;
case MSP_codes.MSP_ATTITUDE:
SENSOR_DATA.kinematics[0] = data.getInt16(0, 1) / 10.0; // x
SENSOR_DATA.kinematics[1] = data.getInt16(2, 1) / 10.0; // y
SENSOR_DATA.kinematics[2] = data.getInt16(4, 1); // z
break;
case MSP_codes.MSP_ALTITUDE:
SENSOR_DATA.altitude = parseFloat((data.getInt32(0, 1) / 100.0).toFixed(2)); // correct scale factor
break;
case MSP_codes.MSP_SONAR:
SENSOR_DATA.sonar = data.getInt32(0, 1);
break;
case MSP_codes.MSP_ANALOG:
ANALOG.voltage = data.getUint8(0) / 10.0;
ANALOG.mAhdrawn = data.getUint16(1, 1);
ANALOG.rssi = data.getUint16(3, 1); // 0-1023
ANALOG.amperage = data.getInt16(5, 1) / 100; // A
break;
case MSP_codes.MSP_RC_TUNING:
var offset = 0;
RC_tuning.RC_RATE = parseFloat((data.getUint8(offset++) / 100).toFixed(2));
RC_tuning.RC_EXPO = parseFloat((data.getUint8(offset++) / 100).toFixed(2));
if (semver.lt(CONFIG.apiVersion, "1.7.0")) {
RC_tuning.roll_pitch_rate = parseFloat((data.getUint8(offset++) / 100).toFixed(2));
RC_tuning.pitch_rate = 0;
RC_tuning.roll_rate = 0;
} else {
RC_tuning.roll_pitch_rate = 0;
RC_tuning.roll_rate = parseFloat((data.getUint8(offset++) / 100).toFixed(2));
RC_tuning.pitch_rate = parseFloat((data.getUint8(offset++) / 100).toFixed(2));
}
RC_tuning.yaw_rate = parseFloat((data.getUint8(offset++) / 100).toFixed(2));
RC_tuning.dynamic_THR_PID = parseFloat((data.getUint8(offset++) / 100).toFixed(2));
RC_tuning.throttle_MID = parseFloat((data.getUint8(offset++) / 100).toFixed(2));
RC_tuning.throttle_EXPO = parseFloat((data.getUint8(offset++) / 100).toFixed(2));
if (semver.gte(CONFIG.apiVersion, "1.7.0")) {
RC_tuning.dynamic_THR_breakpoint = data.getUint16(offset, 1);
offset += 2;
} else {
RC_tuning.dynamic_THR_breakpoint = 0;
}
if (semver.gte(CONFIG.apiVersion, "1.10.0")) {
RC_tuning.RC_YAW_EXPO = parseFloat((data.getUint8(offset++) / 100).toFixed(2));
} else {
RC_tuning.RC_YAW_EXPO = 0;
}
break;
case MSP_codes.MSP_PID:
// PID data arrived, we need to scale it and save to appropriate bank / array
for (var i = 0, needle = 0; i < (message_length / 3); i++, needle += 3) {
// main for loop selecting the pid section
switch (i) {
case 0:
case 1:
case 2:
case 3:
case 7:
case 8:
case 9:
PIDs[i][0] = data.getUint8(needle) / 10;
PIDs[i][1] = data.getUint8(needle + 1) / 1000;
PIDs[i][2] = data.getUint8(needle + 2);
break;
case 4:
PIDs[i][0] = data.getUint8(needle) / 100;
PIDs[i][1] = data.getUint8(needle + 1) / 100;
PIDs[i][2] = data.getUint8(needle + 2) / 1000;
break;
case 5:
case 6:
PIDs[i][0] = data.getUint8(needle) / 10;
PIDs[i][1] = data.getUint8(needle + 1) / 100;
PIDs[i][2] = data.getUint8(needle + 2) / 1000;
break;
}
}
break;
// Disabled, cleanflight does not use MSP_BOX.
/*
case MSP_codes.MSP_BOX:
AUX_CONFIG_values = []; // empty the array as new data is coming in
// fill in current data
for (var i = 0; i < data.byteLength; i += 2) { // + 2 because uint16_t = 2 bytes
AUX_CONFIG_values.push(data.getUint16(i, 1));
}
break;
*/
case MSP_codes.MSP_ARMING_CONFIG:
if (semver.gte(CONFIG.apiVersion, "1.8.0")) {
ARMING_CONFIG.auto_disarm_delay = data.getUint8(0, 1);
ARMING_CONFIG.disarm_kill_switch = data.getUint8(1);
}
break;
case MSP_codes.MSP_LOOP_TIME:
if (semver.gte(CONFIG.apiVersion, "1.8.0")) {
FC_CONFIG.loopTime = data.getInt16(0, 1);
}
break;
case MSP_codes.MSP_MISC: // 22 bytes
var offset = 0;
MISC.midrc = data.getInt16(offset, 1);
offset += 2;
MISC.minthrottle = data.getUint16(offset, 1); // 0-2000
offset += 2;
MISC.maxthrottle = data.getUint16(offset, 1); // 0-2000
offset += 2;
MISC.mincommand = data.getUint16(offset, 1); // 0-2000
offset += 2;
MISC.failsafe_throttle = data.getUint16(offset, 1); // 1000-2000
offset += 2;
MISC.gps_type = data.getUint8(offset++);
MISC.gps_baudrate = data.getUint8(offset++);
MISC.gps_ubx_sbas = data.getInt8(offset++);
MISC.multiwiicurrentoutput = data.getUint8(offset++);
MISC.rssi_channel = data.getUint8(offset++);
MISC.placeholder2 = data.getUint8(offset++);
MISC.mag_declination = data.getInt16(offset, 1) / 10; // -18000-18000
offset += 2;
MISC.vbatscale = data.getUint8(offset++, 1); // 10-200
MISC.vbatmincellvoltage = data.getUint8(offset++, 1) / 10; // 10-50
MISC.vbatmaxcellvoltage = data.getUint8(offset++, 1) / 10; // 10-50
MISC.vbatwarningcellvoltage = data.getUint8(offset++, 1) / 10; // 10-50
break;
case MSP_codes.MSP_MOTOR_PINS:
console.log(data);
break;
case MSP_codes.MSP_BOXNAMES:
AUX_CONFIG = []; // empty the array as new data is coming in
var buff = [];
for (var i = 0; i < data.byteLength; i++) {
if (data.getUint8(i) == 0x3B) { // ; (delimeter char)
AUX_CONFIG.push(String.fromCharCode.apply(null, buff)); // convert bytes into ASCII and save as strings
// empty buffer
buff = [];
} else {
buff.push(data.getUint8(i));
}
}
break;
case MSP_codes.MSP_PIDNAMES:
PID_names = []; // empty the array as new data is coming in
var buff = [];
for (var i = 0; i < data.byteLength; i++) {
if (data.getUint8(i) == 0x3B) { // ; (delimeter char)
PID_names.push(String.fromCharCode.apply(null, buff)); // convert bytes into ASCII and save as strings
// empty buffer
buff = [];
} else {
buff.push(data.getUint8(i));
}
}
break;
case MSP_codes.MSP_WP:
console.log(data);
break;
case MSP_codes.MSP_BOXIDS:
AUX_CONFIG_IDS = []; // empty the array as new data is coming in
for (var i = 0; i < data.byteLength; i++) {
AUX_CONFIG_IDS.push(data.getUint8(i));
}
break;
case MSP_codes.MSP_SERVO_MIX_RULES:
break;
case MSP_codes.MSP_SERVO_CONFIGURATIONS:
SERVO_CONFIG = []; // empty the array as new data is coming in
if (semver.gte(CONFIG.apiVersion, "1.12.0")) {
if (data.byteLength % 14 == 0) {
for (var i = 0; i < data.byteLength; i += 14) {
var arr = {
'min': data.getInt16(i + 0, 1),
'max': data.getInt16(i + 2, 1),
'middle': data.getInt16(i + 4, 1),
'rate': data.getInt8(i + 6),
'angleAtMin': data.getUint8(i + 7),
'angleAtMax': data.getUint8(i + 8),
'indexOfChannelToForward': data.getInt8(i + 9),
'reversedInputSources': data.getUint32(i + 10)
};
SERVO_CONFIG.push(arr);
}
}
} else {
if (data.byteLength % 7 == 0) {
for (var i = 0; i < data.byteLength; i += 7) {
var arr = {
'min': data.getInt16(i + 0, 1),
'max': data.getInt16(i + 2, 1),
'middle': data.getInt16(i + 4, 1),
'rate': data.getInt8(i + 6),
'angleAtMin': 90,
'angleAtMax': 90,
'indexOfChannelToForward': undefined,
'reversedInputSources': 0
};
SERVO_CONFIG.push(arr);
}
}
if (semver.eq(CONFIG.apiVersion, '1.10.0')) {
// drop two unused servo configurations due to MSP rx buffer to small)
while (SERVO_CONFIG.length > 8) {
SERVO_CONFIG.pop();
}
}
}
break;
case MSP_codes.MSP_SET_RAW_RC:
break;
case MSP_codes.MSP_SET_RAW_GPS:
break;
case MSP_codes.MSP_SET_PID:
console.log('PID settings saved');
break;
/*
case MSP_codes.MSP_SET_BOX:
console.log('AUX Configuration saved');
break;
*/
case MSP_codes.MSP_SET_RC_TUNING:
console.log('RC Tuning saved');
break;
case MSP_codes.MSP_ACC_CALIBRATION:
console.log('Accel calibration executed');
break;
case MSP_codes.MSP_MAG_CALIBRATION:
console.log('Mag calibration executed');
break;
case MSP_codes.MSP_SET_MISC:
console.log('MISC Configuration saved');
break;
case MSP_codes.MSP_RESET_CONF:
console.log('Settings Reset');
break;
case MSP_codes.MSP_SELECT_SETTING:
console.log('Profile selected');
break;
case MSP_codes.MSP_SET_SERVO_CONFIGURATION:
console.log('Servo Configuration saved');
break;
case MSP_codes.MSP_EEPROM_WRITE:
console.log('Settings Saved in EEPROM');
break;
case MSP_codes.MSP_DEBUGMSG:
break;
case MSP_codes.MSP_DEBUG:
for (var i = 0; i < 4; i++)
SENSOR_DATA.debug[i] = data.getInt16((2 * i), 1);
break;
case MSP_codes.MSP_SET_MOTOR:
console.log('Motor Speeds Updated');
break;
// Additional baseflight commands that are not compatible with MultiWii
case MSP_codes.MSP_UID:
CONFIG.uid[0] = data.getUint32(0, 1);
CONFIG.uid[1] = data.getUint32(4, 1);
CONFIG.uid[2] = data.getUint32(8, 1);
break;
case MSP_codes.MSP_ACC_TRIM:
CONFIG.accelerometerTrims[0] = data.getInt16(0, 1); // pitch
CONFIG.accelerometerTrims[1] = data.getInt16(2, 1); // roll
break;
case MSP_codes.MSP_SET_ACC_TRIM:
console.log('Accelerometer trimms saved.');
break;
case MSP_codes.MSP_GPS_SV_INFO:
if (data.byteLength > 0) {
var numCh = data.getUint8(0);
var needle = 1;
for (var i = 0; i < numCh; i++) {
GPS_DATA.chn[i] = data.getUint8(needle);
GPS_DATA.svid[i] = data.getUint8(needle + 1);
GPS_DATA.quality[i] = data.getUint8(needle + 2);
GPS_DATA.cno[i] = data.getUint8(needle + 3);
needle += 4;
}
}
break;
// Additional private MSP for baseflight configurator
case MSP_codes.MSP_RX_MAP:
RC_MAP = []; // empty the array as new data is coming in
for (var i = 0; i < data.byteLength; i++) {
RC_MAP.push(data.getUint8(i));
}
break;
case MSP_codes.MSP_SET_RX_MAP:
console.log('RCMAP saved');
break;
case MSP_codes.MSP_BF_CONFIG:
BF_CONFIG.mixerConfiguration = data.getUint8(0);
BF_CONFIG.features = data.getUint32(1, 1);
BF_CONFIG.serialrx_type = data.getUint8(5);
BF_CONFIG.board_align_roll = data.getInt16(6, 1); // -180 - 360
BF_CONFIG.board_align_pitch = data.getInt16(8, 1); // -180 - 360
BF_CONFIG.board_align_yaw = data.getInt16(10, 1); // -180 - 360
BF_CONFIG.currentscale = data.getInt16(12, 1);
BF_CONFIG.currentoffset = data.getUint16(14, 1);
break;
case MSP_codes.MSP_SET_BF_CONFIG:
break;
case MSP_codes.MSP_SET_REBOOT:
console.log('Reboot request accepted');
break;
//
// Cleanflight specific
//
case MSP_codes.MSP_API_VERSION:
var offset = 0;
CONFIG.mspProtocolVersion = data.getUint8(offset++);
CONFIG.apiVersion = data.getUint8(offset++) + '.' + data.getUint8(offset++) + '.0';
break;
case MSP_codes.MSP_FC_VARIANT:
var identifier = '';
var offset;
for (offset = 0; offset < 4; offset++) {
identifier += String.fromCharCode(data.getUint8(offset));
}
CONFIG.flightControllerIdentifier = identifier;
break;
case MSP_codes.MSP_FC_VERSION:
var offset = 0;
CONFIG.flightControllerVersion = data.getUint8(offset++) + '.' + data.getUint8(offset++) + '.' + data.getUint8(offset++);
break;
case MSP_codes.MSP_BUILD_INFO:
var offset = 0;
var dateLength = 11;
var buff = [];
for (var i = 0; i < dateLength; i++) {
buff.push(data.getUint8(offset++));
}
buff.push(32); // ascii space
var timeLength = 8;
for (var i = 0; i < timeLength; i++) {
buff.push(data.getUint8(offset++));
}
CONFIG.buildInfo = String.fromCharCode.apply(null, buff);
break;
case MSP_codes.MSP_BOARD_INFO:
var identifier = '';
var offset;
for (offset = 0; offset < 4; offset++) {
identifier += String.fromCharCode(data.getUint8(offset));
}
CONFIG.boardIdentifier = identifier;
CONFIG.boardVersion = data.getUint16(offset, 1);
offset+=2;
break;
case MSP_codes.MSP_SET_CHANNEL_FORWARDING:
console.log('Channel forwarding saved');
break;
case MSP_codes.MSP_CF_SERIAL_CONFIG:
if (semver.lt(CONFIG.apiVersion, "1.6.0")) {
SERIAL_CONFIG.ports = [];
var offset = 0;
var serialPortCount = (data.byteLength - (4 * 4)) / 2;
for (var i = 0; i < serialPortCount; i++) {
var serialPort = {
identifier: data.getUint8(offset++, 1),
scenario: data.getUint8(offset++, 1)
}
SERIAL_CONFIG.ports.push(serialPort);
}
SERIAL_CONFIG.mspBaudRate = data.getUint32(offset, 1);
offset+= 4;
SERIAL_CONFIG.cliBaudRate = data.getUint32(offset, 1);
offset+= 4;
SERIAL_CONFIG.gpsBaudRate = data.getUint32(offset, 1);
offset+= 4;
SERIAL_CONFIG.gpsPassthroughBaudRate = data.getUint32(offset, 1);
offset+= 4;
} else {
SERIAL_CONFIG.ports = [];
var offset = 0;
var bytesPerPort = 1 + 2 + (1 * 4);
var serialPortCount = data.byteLength / bytesPerPort;
for (var i = 0; i < serialPortCount; i++) {
var serialPort = {
identifier: data.getUint8(offset, 1),
functions: MSP.serialPortFunctionMaskToFunctions(data.getUint16(offset + 1, 1)),
msp_baudrate: MSP.supportedBaudRates[data.getUint8(offset + 3, 1)],
gps_baudrate: MSP.supportedBaudRates[data.getUint8(offset + 4, 1)],
telemetry_baudrate: MSP.supportedBaudRates[data.getUint8(offset + 5, 1)],
blackbox_baudrate: MSP.supportedBaudRates[data.getUint8(offset + 6, 1)]
}
offset += bytesPerPort;
SERIAL_CONFIG.ports.push(serialPort);
}
}
break;
case MSP_codes.MSP_SET_CF_SERIAL_CONFIG:
console.log('Serial config saved');
break;
case MSP_codes.MSP_MODE_RANGES:
MODE_RANGES = []; // empty the array as new data is coming in
var modeRangeCount = data.byteLength / 4; // 4 bytes per item.
var offset = 0;
for (var i = 0; offset < data.byteLength && i < modeRangeCount; i++) {
var modeRange = {
id: data.getUint8(offset++, 1),
auxChannelIndex: data.getUint8(offset++, 1),
range: {
start: 900 + (data.getUint8(offset++, 1) * 25),
end: 900 + (data.getUint8(offset++, 1) * 25)
}
};
MODE_RANGES.push(modeRange);
}
break;
case MSP_codes.MSP_ADJUSTMENT_RANGES:
ADJUSTMENT_RANGES = []; // empty the array as new data is coming in
var adjustmentRangeCount = data.byteLength / 6; // 6 bytes per item.
var offset = 0;
for (var i = 0; offset < data.byteLength && i < adjustmentRangeCount; i++) {
var adjustmentRange = {
slotIndex: data.getUint8(offset++, 1),
auxChannelIndex: data.getUint8(offset++, 1),
range: {
start: 900 + (data.getUint8(offset++, 1) * 25),
end: 900 + (data.getUint8(offset++, 1) * 25)
},
adjustmentFunction: data.getUint8(offset++, 1),
auxSwitchChannelIndex: data.getUint8(offset++, 1)
};
ADJUSTMENT_RANGES.push(adjustmentRange);
}
break;
case MSP_codes.MSP_CHANNEL_FORWARDING:
for (var i = 0; i < data.byteLength && i < SERVO_CONFIG.length; i ++) {
var channelIndex = data.getUint8(i);
if (channelIndex < 255) {
SERVO_CONFIG[i].indexOfChannelToForward = channelIndex;
} else {
SERVO_CONFIG[i].indexOfChannelToForward = undefined;
}
}
break;
case MSP_codes.MSP_LED_STRIP_CONFIG:
LED_STRIP = [];
var ledCount = data.byteLength / 7; // v1.4.0 and below incorrectly reported 4 bytes per led.
var offset = 0;
for (var i = 0; offset < data.byteLength && i < ledCount; i++) {
var directionMask = data.getUint16(offset, 1);
offset += 2;
var directions = [];
for (var directionLetterIndex = 0; directionLetterIndex < MSP.ledDirectionLetters.length; directionLetterIndex++) {
if (bit_check(directionMask, directionLetterIndex)) {
directions.push(MSP.ledDirectionLetters[directionLetterIndex]);
}
}
var functionMask = data.getUint16(offset, 1);
offset += 2;
var functions = [];
for (var functionLetterIndex = 0; functionLetterIndex < MSP.ledFunctionLetters.length; functionLetterIndex++) {
if (bit_check(functionMask, functionLetterIndex)) {
functions.push(MSP.ledFunctionLetters[functionLetterIndex]);
}
}
var led = {
directions: directions,
functions: functions,
x: data.getUint8(offset++, 1),
y: data.getUint8(offset++, 1),
color: data.getUint8(offset++, 1)
};
LED_STRIP.push(led);
}
break;
case MSP_codes.MSP_SET_LED_STRIP_CONFIG:
console.log('Led strip config saved');
break;
case MSP_codes.MSP_DATAFLASH_SUMMARY:
if (data.byteLength >= 13) {
DATAFLASH.ready = (data.getUint8(0) & 1) != 0;
DATAFLASH.sectors = data.getUint32(1, 1);
DATAFLASH.totalSize = data.getUint32(5, 1);
DATAFLASH.usedSize = data.getUint32(9, 1);
} else {
// Firmware version too old to support MSP_DATAFLASH_SUMMARY
DATAFLASH.ready = false;
DATAFLASH.sectors = 0;
DATAFLASH.totalSize = 0;
DATAFLASH.usedSize = 0;
}
break;
case MSP_codes.MSP_DATAFLASH_READ:
// No-op, let callback handle it
break;
case MSP_codes.MSP_DATAFLASH_ERASE:
console.log("Data flash erase begun...");
break;
case MSP_codes.MSP_SET_MODE_RANGE:
console.log('Mode range saved');
break;
case MSP_codes.MSP_SET_ADJUSTMENT_RANGE:
console.log('Adjustment range saved');
break;
case MSP_codes.MSP_PID_CONTROLLER:
PID.controller = data.getUint8(0, 1);
break;
case MSP_codes.MSP_SET_PID_CONTROLLER:
console.log('PID controller changed');
break;
case MSP_codes.MSP_SET_LOOP_TIME:
console.log('Looptime saved');
break;
case MSP_codes.MSP_SET_ARMING_CONFIG:
console.log('Arming config saved');
break;
default:
console.log('Unknown code detected: ' + code);
}
// trigger callbacks, cleanup/remove callback after trigger
for (var i = this.callbacks.length - 1; i >= 0; i--) { // itterating in reverse because we use .splice which modifies array length
if (this.callbacks[i].code == code) {
// save callback reference
var callback = this.callbacks[i].callback;
// remove timeout
clearInterval(this.callbacks[i].timer);
// remove object from array
this.callbacks.splice(i, 1);
// fire callback
if (callback) callback({'command': code, 'data': data, 'length': message_length});
}
}
},
send_message: function (code, data, callback_sent, callback_msp) {
var bufferOut,
bufView;
// always reserve 6 bytes for protocol overhead !
if (data) {
var size = data.length + 6,
checksum = 0;
bufferOut = new ArrayBuffer(size);
bufView = new Uint8Array(bufferOut);
bufView[0] = 36; // $
bufView[1] = 77; // M
bufView[2] = 60; // <
bufView[3] = data.length;
bufView[4] = code;
checksum = bufView[3] ^ bufView[4];
for (var i = 0; i < data.length; i++) {
bufView[i + 5] = data[i];
checksum ^= bufView[i + 5];
}
bufView[5 + data.length] = checksum;
} else {
bufferOut = new ArrayBuffer(6);
bufView = new Uint8Array(bufferOut);
bufView[0] = 36; // $
bufView[1] = 77; // M
bufView[2] = 60; // <
bufView[3] = 0; // data length
bufView[4] = code; // code
bufView[5] = bufView[3] ^ bufView[4]; // checksum
}
// dev version 0.57 code below got recently changed due to the fact that queueing same MSP codes was unsupported
// and was causing trouble while backup/restoring configurations
// watch out if the recent change create any inconsistencies and then adjust accordingly
var obj = {'code': code, 'requestBuffer': bufferOut, 'callback': (callback_msp) ? callback_msp : false, 'timer': false};
var requestExists = false;
for (var i = 0; i < MSP.callbacks.length; i++) {
if (MSP.callbacks[i].code == code) {
// request already exist, we will just attach
requestExists = true;
break;
}
}
if (!requestExists) {
obj.timer = setInterval(function () {
console.log('MSP data request timed-out: ' + code);
serial.send(bufferOut, false);
}, 1000); // we should be able to define timeout in the future
}
MSP.callbacks.push(obj);
// always send messages with data payload (even when there is a message already in the queue)
if (data || !requestExists) {
serial.send(bufferOut, function (sendInfo) {
if (sendInfo.bytesSent == bufferOut.byteLength) {
if (callback_sent) callback_sent();
}
});
}
return true;
},
callbacks_cleanup: function () {
for (var i = 0; i < this.callbacks.length; i++) {
clearInterval(this.callbacks[i].timer);
}
this.callbacks = [];
},
disconnect_cleanup: function () {
this.state = 0; // reset packet state for "clean" initial entry (this is only required if user hot-disconnects)
this.packet_error = 0; // reset CRC packet error counter for next session
this.callbacks_cleanup();
}
};
/**
* Encode the request body for the MSP request with the given code and return it as an array of bytes.
*/
MSP.crunch = function (code) {
var buffer = [];
switch (code) {
case MSP_codes.MSP_SET_BF_CONFIG:
buffer.push(BF_CONFIG.mixerConfiguration);
buffer.push(specificByte(BF_CONFIG.features, 0));
buffer.push(specificByte(BF_CONFIG.features, 1));
buffer.push(specificByte(BF_CONFIG.features, 2));
buffer.push(specificByte(BF_CONFIG.features, 3));
buffer.push(BF_CONFIG.serialrx_type);
buffer.push(specificByte(BF_CONFIG.board_align_roll, 0));
buffer.push(specificByte(BF_CONFIG.board_align_roll, 1));
buffer.push(specificByte(BF_CONFIG.board_align_pitch, 0));
buffer.push(specificByte(BF_CONFIG.board_align_pitch, 1));
buffer.push(specificByte(BF_CONFIG.board_align_yaw, 0));
buffer.push(specificByte(BF_CONFIG.board_align_yaw, 1));
buffer.push(lowByte(BF_CONFIG.currentscale));
buffer.push(highByte(BF_CONFIG.currentscale));
buffer.push(lowByte(BF_CONFIG.currentoffset));
buffer.push(highByte(BF_CONFIG.currentoffset));
break;
case MSP_codes.MSP_SET_PID_CONTROLLER:
buffer.push(PID.controller);
break;
case MSP_codes.MSP_SET_PID:
for (var i = 0; i < PIDs.length; i++) {
switch (i) {
case 0:
case 1:
case 2:
case 3:
case 7:
case 8:
case 9:
buffer.push(parseInt(PIDs[i][0] * 10));
buffer.push(parseInt(PIDs[i][1] * 1000));
buffer.push(parseInt(PIDs[i][2]));
break;
case 4:
buffer.push(parseInt(PIDs[i][0] * 100));
buffer.push(parseInt(PIDs[i][1] * 100));
buffer.push(parseInt(PIDs[i][2]));
break;
case 5:
case 6:
buffer.push(parseInt(PIDs[i][0] * 10));
buffer.push(parseInt(PIDs[i][1] * 100));
buffer.push(parseInt(PIDs[i][2] * 1000));
break;
}
}
break;
case MSP_codes.MSP_SET_RC_TUNING:
buffer.push(parseInt(RC_tuning.RC_RATE * 100));
buffer.push(parseInt(RC_tuning.RC_EXPO * 100));
if (semver.lt(CONFIG.apiVersion, "1.7.0")) {
buffer.push(parseInt(RC_tuning.roll_pitch_rate * 100));
} else {
buffer.push(parseInt(RC_tuning.roll_rate * 100));
buffer.push(parseInt(RC_tuning.pitch_rate * 100));
}
buffer.push(parseInt(RC_tuning.yaw_rate * 100));
buffer.push(parseInt(RC_tuning.dynamic_THR_PID * 100));
buffer.push(parseInt(RC_tuning.throttle_MID * 100));
buffer.push(parseInt(RC_tuning.throttle_EXPO * 100));
if (semver.gte(CONFIG.apiVersion, "1.7.0")) {
buffer.push(lowByte(RC_tuning.dynamic_THR_breakpoint));
buffer.push(highByte(RC_tuning.dynamic_THR_breakpoint));
}
if (semver.gte(CONFIG.apiVersion, "1.10.0")) {
buffer.push(parseInt(RC_tuning.RC_YAW_EXPO * 100));
}
break;
// Disabled, cleanflight does not use MSP_SET_BOX.
/*
case MSP_codes.MSP_SET_BOX:
for (var i = 0; i < AUX_CONFIG_values.length; i++) {
buffer.push(lowByte(AUX_CONFIG_values[i]));
buffer.push(highByte(AUX_CONFIG_values[i]));
}
break;
*/
case MSP_codes.MSP_SET_RX_MAP:
for (var i = 0; i < RC_MAP.length; i++) {
buffer.push(RC_MAP[i]);
}
break;
case MSP_codes.MSP_SET_ACC_TRIM:
buffer.push(lowByte(CONFIG.accelerometerTrims[0]));
buffer.push(highByte(CONFIG.accelerometerTrims[0]));
buffer.push(lowByte(CONFIG.accelerometerTrims[1]));
buffer.push(highByte(CONFIG.accelerometerTrims[1]));
break;
case MSP_codes.MSP_SET_ARMING_CONFIG:
buffer.push(ARMING_CONFIG.auto_disarm_delay);
buffer.push(ARMING_CONFIG.disarm_kill_switch);
break;
case MSP_codes.MSP_SET_LOOP_TIME:
buffer.push(lowByte(FC_CONFIG.loopTime));
buffer.push(highByte(FC_CONFIG.loopTime));
break;
case MSP_codes.MSP_SET_MISC:
buffer.push(lowByte(MISC.midrc));
buffer.push(highByte(MISC.midrc));
buffer.push(lowByte(MISC.minthrottle));
buffer.push(highByte(MISC.minthrottle));
buffer.push(lowByte(MISC.maxthrottle));
buffer.push(highByte(MISC.maxthrottle));
buffer.push(lowByte(MISC.mincommand));
buffer.push(highByte(MISC.mincommand));
buffer.push(lowByte(MISC.failsafe_throttle));
buffer.push(highByte(MISC.failsafe_throttle));
buffer.push(MISC.gps_type);
buffer.push(MISC.gps_baudrate);
buffer.push(MISC.gps_ubx_sbas);
buffer.push(MISC.multiwiicurrentoutput);
buffer.push(MISC.rssi_channel);
buffer.push(MISC.placeholder2);
buffer.push(lowByte(MISC.mag_declination * 10));
buffer.push(highByte(MISC.mag_declination * 10));
buffer.push(MISC.vbatscale);
buffer.push(MISC.vbatmincellvoltage * 10);
buffer.push(MISC.vbatmaxcellvoltage * 10);
buffer.push(MISC.vbatwarningcellvoltage * 10);
break;
case MSP_codes.MSP_SET_CHANNEL_FORWARDING:
for (var i = 0; i < SERVO_CONFIG.length; i++) {
var out = SERVO_CONFIG[i].indexOfChannelToForward;
if (out == undefined) {
out = 255; // Cleanflight defines "CHANNEL_FORWARDING_DISABLED" as "(uint8_t)0xFF"
}
buffer.push(out);
}
break;
case MSP_codes.MSP_SET_CF_SERIAL_CONFIG:
if (semver.lt(CONFIG.apiVersion, "1.6.0")) {
for (var i = 0; i < SERIAL_CONFIG.ports.length; i++) {
buffer.push(SERIAL_CONFIG.ports[i].scenario);
}
buffer.push(specificByte(SERIAL_CONFIG.mspBaudRate, 0));
buffer.push(specificByte(SERIAL_CONFIG.mspBaudRate, 1));
buffer.push(specificByte(SERIAL_CONFIG.mspBaudRate, 2));
buffer.push(specificByte(SERIAL_CONFIG.mspBaudRate, 3));
buffer.push(specificByte(SERIAL_CONFIG.cliBaudRate, 0));
buffer.push(specificByte(SERIAL_CONFIG.cliBaudRate, 1));
buffer.push(specificByte(SERIAL_CONFIG.cliBaudRate, 2));
buffer.push(specificByte(SERIAL_CONFIG.cliBaudRate, 3));
buffer.push(specificByte(SERIAL_CONFIG.gpsBaudRate, 0));
buffer.push(specificByte(SERIAL_CONFIG.gpsBaudRate, 1));
buffer.push(specificByte(SERIAL_CONFIG.gpsBaudRate, 2));
buffer.push(specificByte(SERIAL_CONFIG.gpsBaudRate, 3));
buffer.push(specificByte(SERIAL_CONFIG.gpsPassthroughBaudRate, 0));
buffer.push(specificByte(SERIAL_CONFIG.gpsPassthroughBaudRate, 1));
buffer.push(specificByte(SERIAL_CONFIG.gpsPassthroughBaudRate, 2));
buffer.push(specificByte(SERIAL_CONFIG.gpsPassthroughBaudRate, 3));
} else {
for (var i = 0; i < SERIAL_CONFIG.ports.length; i++) {
var serialPort = SERIAL_CONFIG.ports[i];
buffer.push(serialPort.identifier);
var functionMask = MSP.serialPortFunctionsToMask(serialPort.functions);
buffer.push(specificByte(functionMask, 0));
buffer.push(specificByte(functionMask, 1));
buffer.push(MSP.supportedBaudRates.indexOf(serialPort.msp_baudrate));
buffer.push(MSP.supportedBaudRates.indexOf(serialPort.gps_baudrate));
buffer.push(MSP.supportedBaudRates.indexOf(serialPort.telemetry_baudrate));
buffer.push(MSP.supportedBaudRates.indexOf(serialPort.blackbox_baudrate));
}
}
break;
default:
return false;
}
return buffer;
};
/**
* Send a request to read a block of data from the dataflash at the given address and pass that address and a dataview
* of the returned data to the given callback (or null for the data if an error occured).
*/
MSP.dataflashRead = function(address, onDataCallback) {
MSP.send_message(MSP_codes.MSP_DATAFLASH_READ, [address & 0xFF, (address >> 8) & 0xFF, (address >> 16) & 0xFF, (address >> 24) & 0xFF],
false, function(response) {
var chunkAddress = response.data.getUint32(0, 1);
// Verify that the address of the memory returned matches what the caller asked for
if (chunkAddress == address) {
/* Strip that address off the front of the reply and deliver it separately so the caller doesn't have to
* figure out the reply format:
*/
onDataCallback(address, new DataView(response.data.buffer, response.data.byteOffset + 4, response.data.buffer.byteLength - 4));
} else {
// Report error
onDataCallback(address, null);
}
});
};
MSP.sendServoMixRules = function(onCompleteCallback) {
// TODO implement
onCompleteCallback();
};
MSP.sendServoConfigurations = function(onCompleteCallback) {
var nextFunction = send_next_servo_configuration;
var servoIndex = 0;
if (SERVO_CONFIG.length == 0) {
onCompleteCallback();
}
nextFunction();
function send_next_servo_configuration() {
var buffer = [];
if (semver.lt(CONFIG.apiVersion, "1.12.0")) {
// send all in one go
// 1.9.0 had a bug where the MSP input buffer was too small, limit to 8.
for (var i = 0; i < SERVO_CONFIG.length && i < 8; i++) {
buffer.push(lowByte(SERVO_CONFIG[i].min));
buffer.push(highByte(SERVO_CONFIG[i].min));
buffer.push(lowByte(SERVO_CONFIG[i].max));
buffer.push(highByte(SERVO_CONFIG[i].max));
buffer.push(lowByte(SERVO_CONFIG[i].middle));
buffer.push(highByte(SERVO_CONFIG[i].middle));
buffer.push(lowByte(SERVO_CONFIG[i].rate));
}
nextFunction = send_channel_forwarding;
} else {
// send one at a time, with index
var servoConfiguration = SERVO_CONFIG[servoIndex];
buffer.push(servoIndex);
buffer.push(lowByte(servoConfiguration.min));
buffer.push(highByte(servoConfiguration.min));
buffer.push(lowByte(servoConfiguration.max));
buffer.push(highByte(servoConfiguration.max));
buffer.push(lowByte(servoConfiguration.middle));
buffer.push(highByte(servoConfiguration.middle));
buffer.push(lowByte(servoConfiguration.rate));
buffer.push(servoConfiguration.angleAtMin);
buffer.push(servoConfiguration.angleAtMax);
var out = servoConfiguration.indexOfChannelToForward;
if (out == undefined) {
out = 255; // Cleanflight defines "CHANNEL_FORWARDING_DISABLED" as "(uint8_t)0xFF"
}
buffer.push(out);
buffer.push(specificByte(servoConfiguration.reversedInputSources, 0));
buffer.push(specificByte(servoConfiguration.reversedInputSources, 1));
buffer.push(specificByte(servoConfiguration.reversedInputSources, 2));
buffer.push(specificByte(servoConfiguration.reversedInputSources, 3));
// prepare for next iteration
servoIndex++;
if (servoIndex == SERVO_CONFIG.length) {
nextFunction = onCompleteCallback;
}
}
MSP.send_message(MSP_codes.MSP_SET_SERVO_CONFIGURATION, buffer, false, nextFunction);
}
function send_channel_forwarding() {
var buffer = [];
for (var i = 0; i < SERVO_CONFIG.length; i++) {
var out = SERVO_CONFIG[i].indexOfChannelToForward;
if (out == undefined) {
out = 255; // Cleanflight defines "CHANNEL_FORWARDING_DISABLED" as "(uint8_t)0xFF"
}
buffer.push(out);
}
nextFunction = onCompleteCallback;
MSP.send_message(MSP_codes.MSP_SET_CHANNEL_FORWARDING, buffer, false, nextFunction);
}
};
MSP.sendModeRanges = function(onCompleteCallback) {
var nextFunction = send_next_mode_range;
var modeRangeIndex = 0;
if (MODE_RANGES.length == 0) {
onCompleteCallback();
}
send_next_mode_range();
function send_next_mode_range() {
var modeRange = MODE_RANGES[modeRangeIndex];
var buffer = [];
buffer.push(modeRangeIndex);
buffer.push(modeRange.id);
buffer.push(modeRange.auxChannelIndex);
buffer.push((modeRange.range.start - 900) / 25);
buffer.push((modeRange.range.end - 900) / 25);
// prepare for next iteration
modeRangeIndex++;
if (modeRangeIndex == MODE_RANGES.length) {
nextFunction = onCompleteCallback;
}
MSP.send_message(MSP_codes.MSP_SET_MODE_RANGE, buffer, false, nextFunction);
}
};
MSP.sendAdjustmentRanges = function(onCompleteCallback) {
var nextFunction = send_next_adjustment_range;
var adjustmentRangeIndex = 0;
if (ADJUSTMENT_RANGES.length == 0) {
onCompleteCallback();
}
send_next_adjustment_range();
function send_next_adjustment_range() {
var adjustmentRange = ADJUSTMENT_RANGES[adjustmentRangeIndex];
var buffer = [];
buffer.push(adjustmentRangeIndex);
buffer.push(adjustmentRange.slotIndex);
buffer.push(adjustmentRange.auxChannelIndex);
buffer.push((adjustmentRange.range.start - 900) / 25);
buffer.push((adjustmentRange.range.end - 900) / 25);
buffer.push(adjustmentRange.adjustmentFunction);
buffer.push(adjustmentRange.auxSwitchChannelIndex);
// prepare for next iteration
adjustmentRangeIndex++;
if (adjustmentRangeIndex == ADJUSTMENT_RANGES.length) {
nextFunction = onCompleteCallback;
}
MSP.send_message(MSP_codes.MSP_SET_ADJUSTMENT_RANGE, buffer, false, nextFunction);
}
};
MSP.sendLedStripConfig = function(onCompleteCallback) {
var nextFunction = send_next_led_strip_config;
var ledIndex = 0;
if (LED_STRIP.length == 0) {
onCompleteCallback();
}
send_next_led_strip_config();
function send_next_led_strip_config() {
var led = LED_STRIP[ledIndex];
var buffer = [];
buffer.push(ledIndex);
var directionMask = 0;
for (var directionLetterIndex = 0; directionLetterIndex < led.directions.length; directionLetterIndex++) {
var bitIndex = MSP.ledDirectionLetters.indexOf(led.directions[directionLetterIndex]);
if (bitIndex >= 0) {
directionMask = bit_set(directionMask, bitIndex);
}
}
buffer.push(specificByte(directionMask, 0));
buffer.push(specificByte(directionMask, 1));
var functionMask = 0;
for (var functionLetterIndex = 0; functionLetterIndex < led.functions.length; functionLetterIndex++) {
var bitIndex = MSP.ledFunctionLetters.indexOf(led.functions[functionLetterIndex]);
if (bitIndex >= 0) {
functionMask = bit_set(functionMask, bitIndex);
}
}
buffer.push(specificByte(functionMask, 0));
buffer.push(specificByte(functionMask, 1));
buffer.push(led.x);
buffer.push(led.y);
buffer.push(led.color);
// prepare for next iteration
ledIndex++;
if (ledIndex == LED_STRIP.length) {
nextFunction = onCompleteCallback;
}
MSP.send_message(MSP_codes.MSP_SET_LED_STRIP_CONFIG, buffer, false, nextFunction);
}
}
MSP.serialPortFunctionMaskToFunctions = function(functionMask) {
var functions = [];
for (var index = 0; index < MSP.serialPortFunctions.length; index++) {
if (bit_check(functionMask, index)) {
functions.push(MSP.serialPortFunctions[index]);
}
}
return functions;
}
MSP.serialPortFunctionsToMask = function(functions) {
var mask = 0;
for (var index = 0; index < functions.length; index++) {
var bitIndex = MSP.serialPortFunctions.indexOf(functions[index]);
if (bitIndex >= 0) {
mask = bit_set(mask, bitIndex);
}
}
return mask;
}
View git blame Copy permalink