diff --git a/src/main/target/JHEMCUF405WING/CMakeLists.txt b/src/main/target/JHEMCUF405WING/CMakeLists.txt
new file mode 100644
index 0000000000..fb99881c9b
--- /dev/null
+++ b/src/main/target/JHEMCUF405WING/CMakeLists.txt
@@ -0,0 +1 @@
+target_stm32f405xg(JHEMCUF405WING)
diff --git a/src/main/target/JHEMCUF405WING/config.c b/src/main/target/JHEMCUF405WING/config.c
new file mode 100644
index 0000000000..07f44ab29f
--- /dev/null
+++ b/src/main/target/JHEMCUF405WING/config.c
@@ -0,0 +1,42 @@
+/*
+ * This file is part of INAV Project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this file,
+ * You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * Alternatively, the contents of this file may be used under the terms
+ * of the GNU General Public License Version 3, as described below:
+ *
+ * This file is free software: you may copy, redistribute and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+ * Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see http://www.gnu.org/licenses/.
+ */
+
+#include <stdbool.h>
+#include <stdint.h>
+
+#include "platform.h"
+
+#include "fc/fc_msp_box.h"
+#include "fc/config.h"
+#include "io/serial.h"
+#include "io/piniobox.h"
+
+void targetConfiguration(void)
+{
+    serialConfigMutable()->portConfigs[findSerialPortIndexByIdentifier(SERIAL_PORT_USART1)].functionMask = FUNCTION_RX_SERIAL;
+    serialConfigMutable()->portConfigs[findSerialPortIndexByIdentifier(SERIAL_PORT_USART3)].functionMask = FUNCTION_GPS;
+    serialConfigMutable()->portConfigs[findSerialPortIndexByIdentifier(SERIAL_PORT_USART6)].functionMask = FUNCTION_MSP;
+	
+    pinioBoxConfigMutable()->permanentId[0] = BOX_PERMANENT_ID_USER1;
+}
diff --git a/src/main/target/JHEMCUF405WING/target.c b/src/main/target/JHEMCUF405WING/target.c
new file mode 100644
index 0000000000..e8187f936b
--- /dev/null
+++ b/src/main/target/JHEMCUF405WING/target.c
@@ -0,0 +1,47 @@
+/*
+ * This file is part of INAV.
+ *
+ * INAV is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * INAV is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with INAV.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <platform.h>
+
+#include "drivers/bus.h"
+#include "drivers/io.h"
+#include "drivers/pwm_mapping.h"
+#include "drivers/timer.h"
+#include "drivers/pinio.h"
+#include "drivers/sensor.h"
+
+timerHardware_t timerHardware[] = {
+    DEF_TIM(TIM4, CH2, PB7, TIM_USE_OUTPUT_AUTO, 1, 0), // S1 D(1,3,2)
+    DEF_TIM(TIM4, CH1, PB6, TIM_USE_OUTPUT_AUTO, 1, 0), // S2 D(1,0,2)
+
+    DEF_TIM(TIM3, CH3, PB0, TIM_USE_OUTPUT_AUTO, 1, 0), // S3 D(1,7,5)
+    DEF_TIM(TIM3, CH4, PB1, TIM_USE_OUTPUT_AUTO, 1, 0), // S4 D(1,2,5)
+    DEF_TIM(TIM8, CH3, PC8, TIM_USE_OUTPUT_AUTO, 1, 0), // S5 D(2,4,7)
+    DEF_TIM(TIM8, CH4, PC9, TIM_USE_OUTPUT_AUTO, 1, 0), // S6 D(2,7,7)
+    
+    DEF_TIM(TIM8, CH2N,PB14, TIM_USE_OUTPUT_AUTO, 1, 0), // S7
+    DEF_TIM(TIM2, CH1, PA15, TIM_USE_OUTPUT_AUTO, 1, 0), // S8
+    DEF_TIM(TIM2, CH3, PB10, TIM_USE_OUTPUT_AUTO, 1, 0), // S9
+    DEF_TIM(TIM2, CH4, PB11, TIM_USE_OUTPUT_AUTO, 1, 0), // S10
+    DEF_TIM(TIM12, CH2,PB15, TIM_USE_OUTPUT_AUTO, 1, 0), // S11 
+
+    DEF_TIM(TIM1, CH1, PA8, TIM_USE_LED, 0, 0), // 2812LED
+    DEF_TIM(TIM5, CH3, PA2, TIM_USE_ANY, 0, 0), // TX2
+};
+
+const int timerHardwareCount = sizeof(timerHardware) / sizeof(timerHardware[0]);
diff --git a/src/main/target/JHEMCUF405WING/target.h b/src/main/target/JHEMCUF405WING/target.h
new file mode 100644
index 0000000000..fd64ff153d
--- /dev/null
+++ b/src/main/target/JHEMCUF405WING/target.h
@@ -0,0 +1,163 @@
+/*
+ * This file is part of INAV.
+ *
+ * INAV is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * INAV is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with INAV.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define USE_TARGET_CONFIG
+
+#define TARGET_BOARD_IDENTIFIER "JH45"
+#define USBD_PRODUCT_STRING     "JHEMCUF405WING"
+
+// LEDs
+#define LED0                    PA14  //Blue
+#define LED1                    PA13  //Green
+
+// Beeper
+#define BEEPER                  PC15
+#define BEEPER_INVERTED
+
+// SPI1
+#define USE_SPI
+#define USE_SPI_DEVICE_1
+#define SPI1_SCK_PIN            PA5
+#define SPI1_MISO_PIN   	    PA6
+#define SPI1_MOSI_PIN   	    PA7
+
+// SPI2
+#define USE_SPI_DEVICE_2
+#define SPI2_SCK_PIN            PB13
+#define SPI2_MISO_PIN   	    PC2
+#define SPI2_MOSI_PIN   	    PC3
+
+// SPI3
+#define USE_SPI_DEVICE_3
+#define SPI3_SCK_PIN            PB3
+#define SPI3_MISO_PIN   	    PB4
+#define SPI3_MOSI_PIN   	    PB5
+
+// Serial ports
+#define USE_VCP
+
+#define USE_UART1
+#define UART1_TX_PIN            PA9
+#define UART1_RX_PIN            PA10
+
+#define USE_UART2
+#define UART2_TX_PIN            PA2
+#define UART2_RX_PIN            PA3
+
+#define USE_UART3
+#define UART3_TX_PIN            PC10
+#define UART3_RX_PIN            PC11
+
+#define USE_UART4
+#define UART4_TX_PIN            PA0
+#define UART4_RX_PIN            PA1
+
+#define USE_UART5
+#define UART5_TX_PIN            PC12
+#define UART5_RX_PIN            PD2
+
+#define USE_UART6
+#define UART6_TX_PIN            PC6
+#define UART6_RX_PIN            PC7
+
+// Optional Softserial on UART2 TX Pin PA2
+#define USE_SOFTSERIAL1
+#define SOFTSERIAL_1_TX_PIN      PA2
+#define SOFTSERIAL_1_RX_PIN      PA2
+
+#define SERIAL_PORT_COUNT       8
+
+#define USE_I2C
+#define USE_I2C_DEVICE_1
+#define I2C1_SCL                PB8
+#define I2C1_SDA                PB9
+
+// ICM42605/ICM42688P
+#define USE_IMU_ICM42605
+#define IMU_ICM42605_ALIGN      CW270_DEG
+#define ICM42605_CS_PIN         PA4
+#define ICM42605_SPI_BUS        BUS_SPI1
+
+// Baro
+#define USE_BARO
+#define BARO_I2C_BUS            BUS_I2C1
+#define USE_BARO_ALL
+
+// Mag
+#define USE_MAG
+#define MAG_I2C_BUS             BUS_I2C1
+#define USE_MAG_ALL 
+
+#define RANGEFINDER_I2C_BUS     BUS_I2C1
+#define PITOT_I2C_BUS           BUS_I2C1
+#define TEMPERATURE_I2C_BUS     BUS_I2C1
+
+// OSD
+#define USE_MAX7456
+#define MAX7456_CS_PIN          PB12
+#define MAX7456_SPI_BUS         BUS_SPI2
+
+// SD Card
+#define USE_SDCARD
+#define USE_SDCARD_SPI
+#define SDCARD_SPI_BUS          BUS_SPI3
+#define SDCARD_CS_PIN           PC14
+
+#define ENABLE_BLACKBOX_LOGGING_ON_SDCARD_BY_DEFAULT
+
+#define DEFAULT_RX_TYPE         RX_TYPE_SERIAL
+#define SERIALRX_PROVIDER       SERIALRX_CRSF
+#define SERIALRX_UART           SERIAL_PORT_USART1
+
+// ADC
+#define USE_ADC
+#define ADC_INSTANCE                ADC1
+#define ADC1_DMA_STREAM             DMA2_Stream0
+#define ADC_CHANNEL_1_PIN           PC0
+#define ADC_CHANNEL_2_PIN           PC1
+#define ADC_CHANNEL_3_PIN           PC5
+#define ADC_CHANNEL_4_PIN           PC4
+#define VBAT_ADC_CHANNEL            ADC_CHN_1
+#define CURRENT_METER_ADC_CHANNEL   ADC_CHN_2
+#define RSSI_ADC_CHANNEL            ADC_CHN_4
+#define AIRSPEED_ADC_CHANNEL        ADC_CHN_3
+
+// LED2812
+#define USE_LED_STRIP
+#define WS2811_PIN              PA8
+
+// PINIO
+#define USE_PINIO
+#define USE_PINIOBOX
+#define PINIO1_PIN              PC13  // 2xCamera switcher
+
+// OTHERS
+#define DEFAULT_FEATURES        (FEATURE_TX_PROF_SEL | FEATURE_OSD | FEATURE_CURRENT_METER | FEATURE_VBAT | FEATURE_TELEMETRY | FEATURE_BLACKBOX | FEATURE_AIRMODE)
+#define CURRENT_METER_SCALE     175
+
+#define USE_DSHOT
+#define USE_ESC_SENSOR
+#define USE_SERIAL_4WAY_BLHELI_INTERFACE
+
+#define TARGET_IO_PORTA         0xffff
+#define TARGET_IO_PORTB         0xffff
+#define TARGET_IO_PORTC         0xffff
+#define TARGET_IO_PORTD         (BIT(2))
+
+#define MAX_PWM_OUTPUT_PORTS    11
\ No newline at end of file
diff --git a/src/main/target/JHEMCUF745/CMakeLists.txt b/src/main/target/JHEMCUF745/CMakeLists.txt
new file mode 100644
index 0000000000..5f5a85e7c5
--- /dev/null
+++ b/src/main/target/JHEMCUF745/CMakeLists.txt
@@ -0,0 +1 @@
+target_stm32f745xg(JHEMCUF745)
diff --git a/src/main/target/JHEMCUF745/config.c b/src/main/target/JHEMCUF745/config.c
new file mode 100644
index 0000000000..fb2fe04f96
--- /dev/null
+++ b/src/main/target/JHEMCUF745/config.c
@@ -0,0 +1,29 @@
+/*
+ * This file is part of INAV.
+ *
+ * INAV is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * INAV is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with INAV.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdbool.h>
+#include <stdint.h>
+
+#include <platform.h>
+
+#include "drivers/pwm_mapping.h"
+
+void targetConfiguration(void)
+{
+    timerOverridesMutable(timer2id(TIM1))->outputMode = OUTPUT_MODE_MOTORS;
+    timerOverridesMutable(timer2id(TIM3))->outputMode = OUTPUT_MODE_MOTORS;
+}
diff --git a/src/main/target/JHEMCUF745/target.c b/src/main/target/JHEMCUF745/target.c
new file mode 100644
index 0000000000..f603cbe43b
--- /dev/null
+++ b/src/main/target/JHEMCUF745/target.c
@@ -0,0 +1,44 @@
+/*
+ * This file is part of INAV.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this file,
+ * You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * Alternatively, the contents of this file may be used under the terms
+ * of the GNU General Public License Version 3, as described below:
+ *
+ * This file is free software: you may copy, redistribute and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+ * Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see http://www.gnu.org/licenses/.
+ */
+
+#include <platform.h>
+#include "drivers/io.h"
+#include "drivers/pwm_mapping.h"
+#include "drivers/timer.h"
+#include "drivers/bus.h"
+#include "drivers/pinio.h"
+
+timerHardware_t timerHardware[] = {
+    DEF_TIM(TIM3, CH3, PB0,  TIM_USE_OUTPUT_AUTO,   0, 0), // M1, DMA1_ST7
+    DEF_TIM(TIM3, CH4, PB1,  TIM_USE_OUTPUT_AUTO,   0, 0), // M2, DMA1_ST2
+    DEF_TIM(TIM1, CH1, PE9,  TIM_USE_OUTPUT_AUTO,   0, 0), // M3
+    DEF_TIM(TIM1, CH2, PE11, TIM_USE_OUTPUT_AUTO,   0, 1), // M4, DMA2_ST4
+    DEF_TIM(TIM8, CH4, PC9,  TIM_USE_OUTPUT_AUTO,   0, 0), // M5, DMA2_ST7
+    DEF_TIM(TIM5, CH4, PA3,  TIM_USE_OUTPUT_AUTO,   0, 0), // M6, DMA1_ST1
+    DEF_TIM(TIM3, CH1, PB4,  TIM_USE_OUTPUT_AUTO,   0, 0), // S7
+    DEF_TIM(TIM3, CH2, PB5,  TIM_USE_OUTPUT_AUTO,   0, 0), // S8
+    DEF_TIM(TIM4, CH1, PD12, TIM_USE_LED,           0, 0), // LED_STRIP, DMA1_ST0
+};
+
+const int timerHardwareCount = sizeof(timerHardware) / sizeof(timerHardware[0]);
diff --git a/src/main/target/JHEMCUF745/target.h b/src/main/target/JHEMCUF745/target.h
new file mode 100644
index 0000000000..dfd45749d2
--- /dev/null
+++ b/src/main/target/JHEMCUF745/target.h
@@ -0,0 +1,157 @@
+/*
+ * This file is part of INAV.
+ *
+ * Cleanflight and Betaflight are free software. You can redistribute
+ * this software and/or modify this software under the terms of the
+ * GNU General Public License as published by the Free Software
+ * Foundation, either version 3 of the License, or (at your option)
+ * any later version.
+ *
+ * Cleanflight and Betaflight are distributed in the hope that they
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define TARGET_BOARD_IDENTIFIER "JHF7"
+#define USBD_PRODUCT_STRING     "JHEMCUF745"
+
+#define LED0                PA2
+
+#define BEEPER              PD15
+#define BEEPER_INVERTED
+
+#define USE_DSHOT
+#define USE_DSHOT_DMAR
+#define USE_ESC_SENSOR
+
+#define USE_IMU_MPU6000
+#define IMU_MPU6000_ALIGN    CW270_DEG
+#define GYRO_INT_EXTI        PE1
+#define MPU6000_CS_PIN       SPI4_NSS_PIN
+#define MPU6000_SPI_BUS      BUS_SPI4
+
+#define USE_IMU_ICM42605
+#define IMU_ICM42605_ALIGN   CW270_DEG
+#define ICM42605_CS_PIN      SPI4_NSS_PIN
+#define ICM42605_SPI_BUS     BUS_SPI4
+#define ICM42605_EXTI_PIN    PE1 
+
+#define USB_IO
+#define USE_VCP
+#define VBUS_SENSING_ENABLED
+#define VBUS_SENSING_PIN    PA8
+
+#define USE_UART1
+#define UART1_TX_PIN        PA9
+#define UART1_RX_PIN        PA10
+
+#define USE_UART2
+#define UART2_TX_PIN        PD5
+#define UART2_RX_PIN        PD6
+
+#define USE_UART3
+#define UART3_TX_PIN        PB10
+#define UART3_RX_PIN        PB11
+
+#define USE_UART4
+#define UART4_TX_PIN        PA0
+#define UART4_RX_PIN        PA1
+
+#define USE_UART5
+#define UART5_TX_PIN        PC12
+#define UART5_RX_PIN        PD2
+
+#define USE_UART6
+#define UART6_TX_PIN        PC6
+#define UART6_RX_PIN        PC7
+
+#define USE_UART7
+#define UART7_RX_PIN PE7
+#define UART7_TX_PIN PE8
+
+#define SERIAL_PORT_COUNT   8 // VCP,UART1,UART2,UART3,UART4,UART5,UART6
+
+#define USE_SPI
+#define USE_SPI_DEVICE_1    // FLASH
+#define USE_SPI_DEVICE_2    // OSD
+#define USE_SPI_DEVICE_4    // ICM20689
+
+#define SPI1_NSS_PIN        PA4
+#define SPI1_SCK_PIN        PA5
+#define SPI1_MISO_PIN       PA6
+#define SPI1_MOSI_PIN       PA7
+
+#define SPI2_NSS_PIN        PB12
+#define SPI2_SCK_PIN        PB13
+#define SPI2_MISO_PIN       PB14
+#define SPI2_MOSI_PIN       PB15
+
+#define SPI4_NSS_PIN        PE4
+#define SPI4_SCK_PIN        PE2
+#define SPI4_MISO_PIN       PE5
+#define SPI4_MOSI_PIN       PE6
+
+#define USE_MAX7456
+#define MAX7456_SPI_BUS     BUS_SPI2
+#define MAX7456_CS_PIN      SPI2_NSS_PIN
+
+#define M25P16_CS_PIN       SPI1_NSS_PIN
+#define M25P16_SPI_BUS      BUS_SPI1
+#define USE_FLASHFS
+#define USE_FLASH_M25P16
+#define ENABLE_BLACKBOX_LOGGING_ON_SPIFLASH_BY_DEFAULT
+
+#define USE_I2C
+#define USE_I2C_DEVICE_1
+#define I2C1_SCL            PB6
+#define I2C1_SDA            PB7
+
+// External I2C bus is the same as interal one
+#define MAG_I2C_BUS         BUS_I2C1
+#define TEMPERATURE_I2C_BUS BUS_I2C1
+#define RANGEFINDER_I2C_BUS BUS_I2C1
+#define DEFAULT_I2C_BUS     BUS_I2C1
+
+#define USE_BARO
+#define USE_BARO_ALL
+#define BARO_I2C_BUS        BUS_I2C1
+
+#define USE_MAG
+#define USE_MAG_ALL
+
+#define USE_ADC
+#define ADC_CHANNEL_1_PIN   PC2
+#define ADC_CHANNEL_2_PIN   PC3
+#define ADC_CHANNEL_3_PIN   PC5
+
+#define CURRENT_METER_ADC_CHANNEL   ADC_CHN_1
+#define VBAT_ADC_CHANNEL            ADC_CHN_2
+#define RSSI_ADC_CHANNEL            ADC_CHN_3
+
+#define ENABLE_BLACKBOX_LOGGING_ON_SDCARD_BY_DEFAULT
+
+#define DEFAULT_FEATURES    (FEATURE_TX_PROF_SEL | FEATURE_TELEMETRY | FEATURE_OSD | FEATURE_VBAT | FEATURE_BLACKBOX)
+#define DEFAULT_RX_TYPE     RX_TYPE_SERIAL
+#define SERIALRX_UART       SERIAL_PORT_USART1
+#define SERIALRX_PROVIDER   SERIALRX_SBUS
+
+#define USE_LED_STRIP
+#define WS2811_PIN          PD12
+
+#define USE_SERIAL_4WAY_BLHELI_INTERFACE
+
+#define TARGET_IO_PORTA 0xffff
+#define TARGET_IO_PORTB 0xffff
+#define TARGET_IO_PORTC 0xffff
+#define TARGET_IO_PORTD 0xffff
+#define TARGET_IO_PORTE 0xffff
+
+#define MAX_PWM_OUTPUT_PORTS    8
diff --git a/src/main/target/JHEMCUH743HD/CMakeLists.txt b/src/main/target/JHEMCUH743HD/CMakeLists.txt
new file mode 100644
index 0000000000..b0192886d6
--- /dev/null
+++ b/src/main/target/JHEMCUH743HD/CMakeLists.txt
@@ -0,0 +1 @@
+target_stm32h743xi(JHEMCUH743HD)
\ No newline at end of file
diff --git a/src/main/target/JHEMCUH743HD/config.c b/src/main/target/JHEMCUH743HD/config.c
new file mode 100644
index 0000000000..4f0aea919e
--- /dev/null
+++ b/src/main/target/JHEMCUH743HD/config.c
@@ -0,0 +1,66 @@
+/*
+ * This file is part of Cleanflight.
+ *
+ * Cleanflight is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * Cleanflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with Cleanflight.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdbool.h>
+#include <stdint.h>
+
+#include <platform.h>
+
+#include "common/axis.h"
+
+#include "config/config_master.h"
+#include "config/feature.h"
+
+#include "drivers/sensor.h"
+#include "drivers/pwm_esc_detect.h"
+#include "drivers/pwm_output.h"
+#include "drivers/serial.h"
+
+#include "fc/rc_controls.h"
+
+#include "flight/failsafe.h"
+#include "flight/mixer.h"
+#include "flight/pid.h"
+
+#include "rx/rx.h"
+
+#include "io/serial.h"
+
+#include "sensors/battery.h"
+#include "sensors/sensors.h"
+
+#include "telemetry/telemetry.h"
+
+#include "io/piniobox.h"
+
+void targetConfiguration(void)
+{
+    pinioBoxConfigMutable()->permanentId[0] = BOX_PERMANENT_ID_USER1;
+    pinioBoxConfigMutable()->permanentId[1] = BOX_PERMANENT_ID_USER2;
+
+
+    /*
+     * UART1 is SerialRX
+     */
+    serialConfigMutable()->portConfigs[findSerialPortIndexByIdentifier(SERIAL_PORT_USART1)].functionMask = FUNCTION_RX_SERIAL;
+    
+    /*
+     * Enable MSP at 115200 at UART4
+     */
+    serialConfigMutable()->portConfigs[findSerialPortIndexByIdentifier(SERIAL_PORT_USART4)].functionMask = FUNCTION_MSP;
+    serialConfigMutable()->portConfigs[findSerialPortIndexByIdentifier(SERIAL_PORT_USART4)].msp_baudrateIndex = BAUD_115200;
+}
diff --git a/src/main/target/JHEMCUH743HD/target.c b/src/main/target/JHEMCUH743HD/target.c
new file mode 100644
index 0000000000..adb753b9d1
--- /dev/null
+++ b/src/main/target/JHEMCUH743HD/target.c
@@ -0,0 +1,49 @@
+/*
+ * This file is part of INAV.
+ *
+ * INAV is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * INAV is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with INAV.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+
+#include "platform.h"
+
+#include "drivers/bus.h"
+#include "drivers/io.h"
+#include "drivers/pwm_mapping.h"
+#include "drivers/timer.h"
+#include "drivers/pinio.h"
+#include "drivers/sensor.h"
+
+BUSDEV_REGISTER_SPI_TAG(busdev_mpu6000,   DEVHW_MPU6000,  MPU6000_SPI_BUS,   MPU6000_CS_PIN,   NONE,   0,  DEVFLAGS_NONE,  IMU_MPU6000_ALIGN);
+BUSDEV_REGISTER_SPI_TAG(busdev_bmi270,   DEVHW_BMI270,  BMI270_SPI_BUS,   BMI270_CS_PIN,   NONE,   0,  DEVFLAGS_NONE,  IMU_BMI270_ALIGN);
+BUSDEV_REGISTER_SPI_TAG(busdev_icm42605,    DEVHW_ICM42605, ICM42605_SPI_BUS,   ICM42605_CS_PIN,    NONE,  0,  DEVFLAGS_NONE,  IMU_ICM42605_ALIGN);
+
+
+timerHardware_t timerHardware[] = {
+
+    DEF_TIM(TIM5, CH1, PA0, TIM_USE_OUTPUT_AUTO, 0, 0),   // S1  
+    DEF_TIM(TIM5, CH2, PA1, TIM_USE_OUTPUT_AUTO, 0, 1),   // S2
+    DEF_TIM(TIM5, CH3, PA2, TIM_USE_OUTPUT_AUTO, 0, 2),   // S3
+    DEF_TIM(TIM5, CH4, PA3, TIM_USE_OUTPUT_AUTO, 0, 3),   // S4
+
+    DEF_TIM(TIM3, CH3, PB0, TIM_USE_OUTPUT_AUTO, 0, 4),   // S5
+    DEF_TIM(TIM3, CH4, PB1, TIM_USE_OUTPUT_AUTO, 0, 5),   // S6
+    DEF_TIM(TIM8, CH3, PC8, TIM_USE_OUTPUT_AUTO, 0, 6),   // S7
+    DEF_TIM(TIM8, CH4, PC9, TIM_USE_OUTPUT_AUTO, 0, 7),   // S8
+
+    DEF_TIM(TIM1,  CH1, PA8,  TIM_USE_LED, 0, 9),    // LED_2812
+};
+
+const int timerHardwareCount = sizeof(timerHardware) / sizeof(timerHardware[0]);
diff --git a/src/main/target/JHEMCUH743HD/target.h b/src/main/target/JHEMCUH743HD/target.h
new file mode 100644
index 0000000000..92300b5256
--- /dev/null
+++ b/src/main/target/JHEMCUH743HD/target.h
@@ -0,0 +1,205 @@
+/*
+ * This file is part of INAV.
+ *
+ * INAV is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * INAV is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with INAV.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define TARGET_BOARD_IDENTIFIER "JHEH743HD"
+#define USBD_PRODUCT_STRING     "JHEMCUH743HD"
+
+#define USE_TARGET_CONFIG
+
+#define LED0 PE5
+#define LED1 PE4
+
+#define BEEPER PE3
+#define BEEPER_INVERTED
+
+// *************** IMU generic ***********************
+#define USE_DUAL_GYRO
+#define USE_TARGET_IMU_HARDWARE_DESCRIPTORS
+
+// *************** SPI1 IMU0 MPU6000 ****************
+#define USE_SPI
+#define USE_SPI_DEVICE_1
+#define SPI1_SCK_PIN PA5
+#define SPI1_MISO_PIN PA6
+#define SPI1_MOSI_PIN PA7
+
+#define USE_IMU_MPU6000
+#define IMU_MPU6000_ALIGN CW180_DEG
+#define MPU6000_SPI_BUS BUS_SPI1
+#define MPU6000_CS_PIN PA4
+
+#define USE_IMU_BMI270
+#define IMU_BMI270_ALIGN CW180_DEG
+#define BMI270_SPI_BUS BUS_SPI1
+#define BMI270_CS_PIN PA4
+
+#define USE_IMU_ICM42605
+#define IMU_ICM42605_ALIGN      CW180_DEG
+#define ICM42605_SPI_BUS        BUS_SPI1
+#define ICM42605_CS_PIN         PA4
+
+// *************** SPI2 OSD ***********************
+#define USE_SPI_DEVICE_2
+#define SPI2_SCK_PIN PB13
+#define SPI2_MISO_PIN PB14
+#define SPI2_MOSI_PIN PB15
+
+#define USE_MAX7456
+#define MAX7456_SPI_BUS BUS_SPI2
+#define MAX7456_CS_PIN PB12
+
+// *************** SPI3 FLASH ***********************
+#define USE_SPI_DEVICE_3
+#define SPI3_SCK_PIN PC10
+#define SPI3_MISO_PIN PC11
+#define SPI3_MOSI_PIN PB2
+#define SPI3_NSS_PIN PA15
+#define SPI3_SCK_AF GPIO_AF6_SPI3
+#define SPI3_MISO_AF GPIO_AF6_SPI3
+#define SPI3_MOSI_AF GPIO_AF7_SPI3
+
+#define M25P16_SPI_BUS BUS_SPI3
+#define M25P16_CS_PIN SPI3_NSS_PIN
+
+#define W25N01G_SPI_BUS BUS_SPI3
+#define W25N01G_CS_PIN SPI3_NSS_PIN
+
+#define USE_BLACKBOX
+#define USE_FLASHFS
+#define USE_FLASH_M25P16
+#define USE_FLASH_W25N01G
+#define ENABLE_BLACKBOX_LOGGING_ON_SPIFLASH_BY_DEFAULT
+
+// *************** I2C /Baro/Mag *********************
+#define USE_I2C
+#define USE_I2C_DEVICE_1
+#define I2C1_SCL PB6
+#define I2C1_SDA PB7
+
+#define USE_I2C_DEVICE_2
+#define I2C2_SCL PB10
+#define I2C2_SDA PB11
+
+#define USE_BARO
+#define BARO_I2C_BUS BUS_I2C1
+#define USE_BARO_ALL
+
+#define USE_MAG
+#define MAG_I2C_BUS BUS_I2C1
+#define USE_MAG_ALL
+
+#define TEMPERATURE_I2C_BUS     BUS_I2C1
+#define PITOT_I2C_BUS           BUS_I2C1
+
+#define USE_RANGEFINDER
+#define RANGEFINDER_I2C_BUS BUS_I2C1
+
+// *************** UART *****************************
+#define USE_VCP
+
+#define USE_UART1
+#define UART1_TX_PIN PA9
+#define UART1_RX_PIN PA10
+
+#define USE_UART2
+#define UART2_TX_PIN PD5
+#define UART2_RX_PIN PD6
+
+#define USE_UART3
+#define UART3_TX_PIN PD8
+#define UART3_RX_PIN PD9
+
+#define USE_UART4
+#define UART4_TX_PIN PD1
+#define UART4_RX_PIN PD0
+
+#define USE_UART5
+#define UART5_TX_PIN PC12
+#define UART5_RX_PIN PD2
+
+#define USE_UART6
+#define UART6_TX_PIN PC6
+#define UART6_RX_PIN PC7
+
+#define USE_UART7
+#define UART7_TX_PIN PE8
+#define UART7_RX_PIN PE7
+
+#define USE_UART8
+#define UART8_TX_PIN PE1
+#define UART8_RX_PIN PE0
+
+#define SERIAL_PORT_COUNT 9
+
+#define DEFAULT_RX_TYPE RX_TYPE_SERIAL
+#define SERIALRX_PROVIDER SERIALRX_SBUS
+
+// *************** ADC *****************************
+#define USE_ADC
+#define ADC_INSTANCE ADC3
+
+#ifdef MAMBAH743_2022B
+
+#define ADC_CHANNEL_1_PIN PC1
+#define ADC_CHANNEL_2_PIN PC3
+#define ADC_CHANNEL_3_PIN PC0
+
+#define VBAT_ADC_CHANNEL ADC_CHN_1
+#define CURRENT_METER_ADC_CHANNEL ADC_CHN_2
+#define AIRSPEED_ADC_CHANNEL ADC_CHN_3
+
+#else
+
+#define ADC_CHANNEL_1_PIN PC1
+#define ADC_CHANNEL_2_PIN PC3
+#define ADC_CHANNEL_3_PIN PC2
+#define ADC_CHANNEL_4_PIN PC0
+
+#define VBAT_ADC_CHANNEL ADC_CHN_1
+#define CURRENT_METER_ADC_CHANNEL ADC_CHN_2
+#define RSSI_ADC_CHANNEL ADC_CHN_3
+#define AIRSPEED_ADC_CHANNEL ADC_CHN_4
+
+#endif
+
+// *************** PINIO ***************************
+#define USE_PINIO
+#define USE_PINIOBOX
+
+#define PINIO1_PIN PC2
+#define PINIO2_PIN PC5
+
+// *************** LEDSTRIP ************************
+#define USE_LED_STRIP
+#define WS2811_PIN PA8
+
+#define DEFAULT_FEATURES (FEATURE_OSD | FEATURE_TELEMETRY | FEATURE_CURRENT_METER | FEATURE_VBAT | FEATURE_TX_PROF_SEL)
+#define CURRENT_METER_SCALE 250
+
+#define USE_SERIAL_4WAY_BLHELI_INTERFACE
+
+#define TARGET_IO_PORTA 0xffff
+#define TARGET_IO_PORTB 0xffff
+#define TARGET_IO_PORTC 0xffff
+#define TARGET_IO_PORTD 0xffff
+#define TARGET_IO_PORTE 0xffff
+
+#define MAX_PWM_OUTPUT_PORTS 8
+#define USE_DSHOT
+#define USE_ESC_SENSOR
\ No newline at end of file