Mirror/inav
1
0
Fork 0
mirror of https://github.com/iNavFlight/inav.git synced 2025-07-12 19:10:27 +03:00
Code Issues Wiki Activity

Merge pull request #4755 from shellixyz/fix_cli_docs

Browse source 
Improve Cli.md
This commit is contained in:
Konstantin Sharlaimov 2019-05-27 23:24:41 +02:00 • committed by GitHub
commit 370544a0eb
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 3 additions and 3 deletions
Download patch file Download diff file Expand all files Collapse all files

6
docs/Cli.md
View file

@ -178,11 +178,11 @@ A shorter form is also supported to enable and disable functions using `serial <
| nav_disarm_on_landing | OFF | If set to ON, iNav disarms the FC after landing |
| nav_use_midthr_for_althold | OFF | If set to OFF, the FC remembers your throttle stick position when enabling ALTHOLD and treats it as a neutral midpoint for holding altitude |
| nav_extra_arming_safety | ON | If set to ON drone won't arm if no GPS fix and any navigation mode like RTH or POSHOLD is configured. ALLOW_BYPASS allows the user to momentarily disable this check by holding yaw high (left stick held at the bottom right in mode 2) when switch arming is used |
| nav_user_control_mode | ATTI | Defines how Pitch/Roll input from RC receiver affects flight in POSHOLD mode: ATTI - right stick controls attitude like in ANGLE mode; CRUISE - right stick controls velocity in forward and right direction. |
| nav_user_control_mode | ATTI | Defines how Pitch/Roll input from RC receiver affects flight in POSHOLD mode: ATTI - pitch/roll controls attitude like in ANGLE mode; CRUISE - pitch/roll controls velocity in forward and right direction. |
| nav_position_timeout | 5 | If GPS fails wait for this much seconds before switching to emergency landing mode (0 - disable) |
| nav_wp_radius | 100 | Waypoint radius [cm]. Waypoint would be considered reached if machine is within this radius |
| nav_wp_safe_distance | 10000 | First waypoint in the mission should be closer than this value [cm] |
| nav_auto_speed | 300 | Maximum velocity firmware is allowed in full auto modes (POSHOLD, RTH, WP) [cm/s] [Multirotor only] |
| nav_auto_speed | 300 | Maximum velocity firmware is allowed in full auto modes (RTH, WP) [cm/s] [Multirotor only] |
| nav_auto_climb_rate | 500 | Maximum climb/descent rate that UAV is allowed to reach during navigation modes. [cm/s] |
| nav_manual_speed | 500 | Maximum velocity firmware is allowed when processing pilot input for POSHOLD/CRUISE control mode [cm/s] [Multirotor only] |
| nav_manual_climb_rate | 200 | Maximum climb/descent rate firmware is allowed when processing pilot input for ALTHOLD control mode [cm/s] |
@ -483,4 +483,4 @@ A shorter form is also supported to enable and disable functions using `serial <
| sim_transmission_interval | -60 | Text message transmission interval in seconds for SIM module. Negative value means transmission is off but can be switched on by sending a "T" message. |
| acc_event_threshold_high | 0 | Acceleration threshold [cm/s/s] for impact detection text messages sent by SIM module. 0 = detection off. |
| acc_event_threshold_low | 0 | Acceleration threshold [cm/s/s] for low-g / freefall detection text messages sent by SIM module. Valid values: [0-900] |
| acc_event_threshold_neg_x | 0 | Acceleration threshold [cm/s/s] for backwards acceleration / fixed wing landing detection text messages sent by SIM module. 0 = detection off. |
| acc_event_threshold_neg_x | 0 | Acceleration threshold [cm/s/s] for backwards acceleration / fixed wing landing detection text messages sent by SIM module. 0 = detection off. |