Mirror/inav
1
0
Fork 0
mirror of https://github.com/iNavFlight/inav.git synced 2025-07-13 11:29:56 +03:00
Code Issues Wiki Activity

Wrong documentation regarding failsafe mode and skipping stage 1

Browse source 
According to @digitalentity this is wrong. 
Stage 1 cannot be bypassed by Failsafe mode and is threated the same way as example No pulses
This commit is contained in:
oleost 2017-01-03 22:12:55 +01:00 • committed by GitHub
parent eeaa20af43
commit 799833d1ce
1 changed files with 0 additions and 2 deletions
Download patch file Download diff file Expand all files Collapse all files

2
docs/Failsafe.md
View file

@ -25,8 +25,6 @@ __Stage 2__ is entered when your craft is __armed__ and __stage 1__ persists lon
__Stage 2__ is not activated until 5 seconds after the flight controller boots up. This is to prevent unwanted activation, as in the case of TX/RX gear with long bind procedures, before the RX sends out valid data. __Stage 2__ is not activated until 5 seconds after the flight controller boots up. This is to prevent unwanted activation, as in the case of TX/RX gear with long bind procedures, before the RX sends out valid data.
__Stage 2__ can also directly be activated when a transmitter switch that is configured to control the failsafe mode is switched ON (and `failsafe_kill_switch` is set to OFF).
__Stage 2__ will be aborted when it was due to: __Stage 2__ will be aborted when it was due to:
* a lost RC signal and the RC signal has recovered. * a lost RC signal and the RC signal has recovered.