Mirror/inav
1
0
Fork 0
mirror of https://github.com/iNavFlight/inav.git synced 2025-07-12 10:59:59 +03:00
Code Issues Wiki Activity

fix broken links to modes.md

Browse source
This commit is contained in:
Ray Morris 2024-03-31 23:53:16 -05:00
parent 2612c135ee
commit 91460013c2
4 changed files with 6 additions and 7 deletions
Download patch file Download diff file Expand all files Collapse all files

3
build_docs.sh
View file

@ -21,7 +21,6 @@ doc_files=(
'Buzzer.md'
'Sonar.md'
'Profiles.md'
'Modes.md'
'Inflight Adjustments.md'
'Controls.md'
'Gtune.md'
@ -49,7 +48,7 @@ if which gimli >/dev/null; then
done
rm -f ${filename}.pdf
gimli -f ${filename}.md -stylesheet override.css \
-w '--toc --title "Cleanflight Manual" --footer-right "[page]" --toc-depth 1'
-w '--toc --title "INAV Manual" --footer-right "[page]" --toc-depth 1'
rm ${filename}.md
popd >/dev/null
else

6
docs/API/MSP_extensions.md
View file

@ -23,7 +23,7 @@ Unassigned slots have rangeStartStep == rangeEndStep. Each element contains the
| Data | Type | Notes |
|------|------|-------|
| permanentId | uint8 | See Modes.md for a definition of the permanent ids |
| permanentId | uint8 | See [Modes in the wiki](https://github.com/iNavFlight/inav/wiki/Modes) for a definition of the permanent ids |
| auxChannelIndex | uint8 | The Aux switch number (indexed from 0) |
| rangeStartStep | uint8 | The start value for this element in 'blocks' of 25 where 0 == 900 and 48 == 2100 |
| rangeEndStep | uint8 | The end value for this element in 'blocks' of 25 where 0 == 900 and 48 == 2100 |
@ -45,7 +45,7 @@ sending this message for all auxiliary slots.
| Data | Type | Notes |
|------|------|-------|
| sequence id | uint8 | A monotonically increasing ID, from 0 to the number of slots -1 |
| permanentId | uint8 | See Modes.md for a definition of the permanent ids |
| permanentId | uint8 | See [Modes in the wiki](https://github.com/iNavFlight/inav/wiki/Modes) for a definition of the permanent ids |
| auxChannelIndex | uint8 | The Aux channel number (indexed from 0) |
| rangeStartStep | uint8 | The start value for this element in 'blocks' of 25 where 0 == 900 and 48 == 2100 |
| rangeEndStep | uint8 | The end value for this element in 'blocks' of 25 where 0 == 900 and 48 == 2100 |
@ -157,5 +157,5 @@ INAV.
See also
--------
Modes.md describes the user visible implementation for the INAV
[The wiki](https://github.com/iNavFlight/inav/wiki/Modes) describes the user visible implementation for the INAV
modes extension.

2
docs/Getting Started.md
View file

@ -70,7 +70,7 @@ Now, there are two ways to [configure CF](Configuration.md); via the Configurat
* Verify the range of each channel goes from ~1000 to ~2000. See also [controls](Controls.md). and `rx_min_usec` and `rx_max_usec`.
* You can also set EXPO here instead of your Tx.
* Click Save!
* Modes tab: Setup the desired modes. See the [modes](Modes.md) chapter for what each mode does, but for the beginning you mainly need HORIZON, if any.
* Modes tab: Setup the desired modes. See the [Modes in the wiki](https://github.com/iNavFlight/inav/wiki/Modes) for what each mode does.
* Before finishing this section, you should calibrate the ESCs, install the FC to the frame, and connect the RSSI cable, buzzer and battery if you have chosen to use those.

2
docs/Safety.md
View file

@ -6,7 +6,7 @@ As many can attest, multirotors and RC models in general can be very dangerous,
## Before Installing
Please consult the [Cli](Cli.md), [Controls](Controls.md), [Failsafe](Failsafe.md) and [Modes](Modes.md)
Please consult the [Cli](Cli.md), [Controls](Controls.md), [Failsafe](Failsafe.md) and [Modes](https://github.com/iNavFlight/inav/wiki/Modes)
pages for further important information.
You are highly advised to use the Receiver tab in the INAV Configurator, making sure your Rx channel