Add the "GEPRCF722_BT_HD" target

src/main/target/GEPRCF722_BT_HD/CMakeLists.txt

@@ -0,0 +1 @@
+target_stm32f722xe(GEPRCF722_BT_HD)

src/main/target/GEPRCF722_BT_HD/config.c

@@ -0,0 +1,62 @@
+/*
+ * This file is part of INAV.
+ *
+ * INAV is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * INAV is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with INAV.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdbool.h>
+#include <stdint.h>
+
+#include <platform.h>
+
+#include "common/axis.h"
+
+#include "config/config_master.h"
+#include "config/feature.h"
+
+#include "drivers/sensor.h"
+#include "drivers/pwm_esc_detect.h"
+#include "drivers/pwm_output.h"
+#include "drivers/serial.h"
+
+#include "fc/rc_controls.h"
+
+#include "flight/failsafe.h"
+#include "flight/mixer.h"
+#include "flight/pid.h"
+
+#include "rx/rx.h"
+
+#include "io/serial.h"
+
+#include "sensors/battery.h"
+#include "sensors/sensors.h"
+
+#include "telemetry/telemetry.h"
+
+#include "fc/fc_msp_box.h"
+
+#include "io/piniobox.h"
+
+
+#define BLUETOOTH_MSP_BAUDRATE      BAUD_115200
+
+void targetConfiguration(void)
+{
+    pinioBoxConfigMutable()->permanentId[1] = BOX_PERMANENT_ID_USER1;
+
+    serialConfigMutable()->portConfigs[findSerialPortIndexByIdentifier(SERIAL_PORT_USART4)].functionMask = FUNCTION_MSP;
+    serialConfigMutable()->portConfigs[findSerialPortIndexByIdentifier(SERIAL_PORT_USART4)].msp_baudrateIndex = BLUETOOTH_MSP_BAUDRATE;
+}
+

src/main/target/GEPRCF722_BT_HD/target.c

@@ -0,0 +1,47 @@
+/*
+* This file is part of INAV Project.
+*
+* INAV is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation, either version 3 of the License, or
+* (at your option) any later version.
+*
+* INAV is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with INAV.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+
+#include "platform.h"
+
+#include "drivers/bus.h"
+#include "drivers/io.h"
+#include "drivers/pwm_mapping.h"
+#include "drivers/timer.h"
+#include "drivers/sensor.h"
+
+
+
+timerHardware_t timerHardware[] = {
+    DEF_TIM(TIM5, CH4, PA3, TIM_USE_PPM,                         0, 0),
+
+    DEF_TIM(TIM8, CH3, PC8, TIM_USE_MC_MOTOR | TIM_USE_FW_SERVO, 0, 0),
+    DEF_TIM(TIM8, CH1, PC6, TIM_USE_MC_MOTOR | TIM_USE_FW_SERVO, 0, 0),
+    DEF_TIM(TIM8, CH4, PC9, TIM_USE_MC_MOTOR | TIM_USE_FW_SERVO, 0, 0),
+    DEF_TIM(TIM8, CH2, PC7, TIM_USE_MC_MOTOR | TIM_USE_FW_SERVO, 0, 0),
+
+    DEF_TIM(TIM4, CH1, PB6, TIM_USE_MC_MOTOR | TIM_USE_FW_MOTOR | TIM_USE_MC_SERVO, 0, 0),
+    DEF_TIM(TIM4, CH2, PB7, TIM_USE_MC_MOTOR | TIM_USE_FW_MOTOR | TIM_USE_MC_SERVO, 0, 0),
+
+    DEF_TIM(TIM3, CH4, PB1, TIM_USE_MC_MOTOR | TIM_USE_FW_SERVO | TIM_USE_MC_SERVO, 0, 0),
+    DEF_TIM(TIM3, CH3, PB0, TIM_USE_MC_MOTOR | TIM_USE_FW_SERVO | TIM_USE_MC_SERVO, 0, 0),
+
+    DEF_TIM(TIM2, CH2, PA1, TIM_USE_LED,                         0, 0),
+};
+
+const int timerHardwareCount = sizeof(timerHardware) / sizeof(timerHardware[0]);

src/main/target/GEPRCF722_BT_HD/target.h

@@ -0,0 +1,180 @@
+/*
+ * This file is part of INAV Project.
+ *
+ * INAV is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * INAV is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with INAV.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define TARGET_BOARD_IDENTIFIER "GEPR"
+
+#define USBD_PRODUCT_STRING     "GEPRCF722_BT_HD"
+
+#define LED0                    PC4
+
+#define BEEPER                  PC15
+#define BEEPER_INVERTED
+
+// *************** Gyro & ACC **********************
+
+#define USE_SPI
+#define USE_SPI_DEVICE_1
+
+#define SPI1_SCK_PIN            PA5
+#define SPI1_MISO_PIN           PA6
+#define SPI1_MOSI_PIN           PA7
+
+
+#define USE_IMU_MPU6000
+#define IMU_MPU6000_ALIGN       CW0_DEG
+#define MPU6000_CS_PIN          PA15
+#define MPU6000_SPI_BUS         BUS_SPI1
+#define MPU6000_EXTI_PIN        PA8
+
+#define USE_IMU_BMI270
+#define IMU_BMI270_ALIGN        CW0_DEG
+#define BMI270_CS_PIN           PA15
+#define BMI270_SPI_BUS          BUS_SPI1
+#define BMI270_EXTI_PIN         PA8
+
+#define USE_IMU_ICM42605
+#define IMU_ICM42605_ALIGN      CW0_DEG
+#define ICM42605_CS_PIN         PA15
+#define ICM42605_SPI_BUS        BUS_SPI1
+#define ICM42605_EXTI_PIN       PA8
+
+#define USE_EXTI
+#define USE_MPU_DATA_READY_SIGNAL
+
+// *************** I2C/Baro/Mag *********************
+#define USE_I2C
+#define USE_I2C_DEVICE_2
+#define I2C2_SCL                PB10
+#define I2C2_SDA                PB11
+
+#define USE_BARO
+#define BARO_I2C_BUS            BUS_I2C2
+#define USE_BARO_BMP280
+#define USE_BARO_DPS310
+#define USE_BARO_MS5611
+
+#define USE_MAG
+#define MAG_I2C_BUS             BUS_I2C2
+#define USE_MAG_HMC5883
+#define USE_MAG_QMC5883
+#define USE_MAG_IST8310
+#define USE_MAG_IST8308
+#define USE_MAG_MAG3110
+#define USE_MAG_LIS3MDL
+
+#define TEMPERATURE_I2C_BUS     BUS_I2C2
+
+#define PITOT_I2C_BUS           BUS_I2C2
+
+#define USE_RANGEFINDER
+#define RANGEFINDER_I2C_BUS     BUS_I2C2
+#define BNO055_I2C_BUS          BUS_I2C2
+
+// *************** FLASH **************************
+#define USE_SDCARD
+#define USE_SDCARD_SPI
+#define SDCARD_SPI_BUS          BUS_SPI3
+#define SDCARD_CS_PIN           PB9
+
+
+#define USE_SPI_DEVICE_3
+#define SPI3_SCK_PIN            PB3
+#define SPI3_MISO_PIN   	    PB4
+#define SPI3_MOSI_PIN   	    PB5
+
+
+// ************PINIO to disable BT*****************
+#define USE_PINIO
+#define USE_PINIOBOX
+#define PINIO1_PIN                  PC13
+#define PINIO1_FLAGS                PINIO_FLAGS_INVERTED
+
+
+// ************PINIO to other
+#define PINIO2_PIN                  PC14                //Enable vsw
+#define PINIO3_PIN                  PB8
+
+
+// *************** OSD *****************************
+#define USE_SPI_DEVICE_2
+#define SPI2_SCK_PIN            PB13
+#define SPI2_MISO_PIN           PB14
+#define SPI2_MOSI_PIN           PB15
+
+#define USE_MAX7456
+#define MAX7456_SPI_BUS         BUS_SPI2
+#define MAX7456_CS_PIN          PB12
+
+// *************** UART *****************************
+#define USE_VCP
+
+#define USE_UART1
+#define UART1_RX_PIN            PA10
+#define UART1_TX_PIN            PA9
+
+#define USE_UART2
+#define UART2_RX_PIN            PA3
+#define UART2_TX_PIN            PA2
+
+#define USE_UART4
+#define UART4_RX_PIN            PC11
+#define UART4_TX_PIN            PC10
+
+#define USE_UART5
+#define UART5_RX_PIN            PD2
+#define UART5_TX_PIN            PC12
+
+#define USE_UART6
+#define UART6_RX_PIN            PC7
+#define UART6_TX_PIN            PC6
+
+#define SERIAL_PORT_COUNT       6
+
+#define DEFAULT_RX_TYPE         RX_TYPE_SERIAL
+#define SERIALRX_PROVIDER       SERIALRX_SBUS
+#define SERIALRX_UART           SERIAL_PORT_USART2
+
+// *************** ADC *****************************
+#define USE_ADC
+#define ADC_INSTANCE                ADC1
+#define ADC1_DMA_STREAM             DMA2_Stream0
+#define ADC_CHANNEL_1_PIN           PC1
+#define ADC_CHANNEL_2_PIN           PC2
+#define ADC_CHANNEL_3_PIN           PC0
+
+#define VBAT_ADC_CHANNEL            ADC_CHN_1
+#define CURRENT_METER_ADC_CHANNEL   ADC_CHN_2
+#define RSSI_ADC_CHANNEL            ADC_CHN_3
+
+#define DEFAULT_FEATURES            (FEATURE_TX_PROF_SEL | FEATURE_CURRENT_METER | FEATURE_TELEMETRY | FEATURE_VBAT | FEATURE_OSD | FEATURE_BLACKBOX)
+
+#define USE_LED_STRIP
+#define WS2811_PIN                  PA1
+
+#define USE_SERIAL_4WAY_BLHELI_INTERFACE
+
+#define TARGET_IO_PORTA             0xffff
+#define TARGET_IO_PORTB             0xffff
+#define TARGET_IO_PORTC             0xffff
+#define TARGET_IO_PORTD             (BIT(2))
+
+#define MAX_PWM_OUTPUT_PORTS        8
+
+#define USE_DSHOT
+#define USE_ESC_SENSOR