Mirror/inav
1
0
Fork 0
mirror of https://github.com/iNavFlight/inav.git synced 2025-07-13 03:19:58 +03:00
Code Issues Wiki Activity

Merge pull request #4430 from shellixyz/update_cli_docs

Browse source 
Update CLI documentation
This commit is contained in:
Konstantin Sharlaimov 2019-03-01 20:13:29 +01:00 • committed by GitHub
commit c13d1ec0d1
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 5 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

5
docs/Cli.md
View file

@ -298,8 +298,13 @@ After restoring it's always a good idea to `dump` or `diff` the settings once ag
| osd_dist_alarm | 1000 | Value above which to make the OSD distance from home indicator blink (meters) |
| osd_alt_alarm | 100 | Value above which to make the OSD relative altitude indicator blink (meters) |
| osd_neg_alt_alarm | 5 | Value bellow which (negative altitude) to make the OSD relative altitude indicator blink (meters) |
| osd_imu_temp_alarm_min | -200 | Temperature under which the IMU temperature OSD element will start blinking (decidegrees centigrade) |
| osd_imu_temp_alarm_max | 600 | Temperature above which the IMU temperature OSD element will start blinking (decidegrees centigrade) |
| osd_baro_temp_alarm_min | -200 | Temperature under which the baro temperature OSD element will start blinking (decidegrees centigrade) |
| osd_baro_temp_alarm_max | 600 | Temperature above which the baro temperature OSD element will start blinking (decidegrees centigrade) |
| osd_estimations_wind_compensation | ON | Use wind estimation for remaining flight time/distance estimation |
| osd_failsafe_switch_layout | OFF | If enabled the OSD automatically switches to the first layout during failsafe |
| osd_temp_label_align | LEFT | Allows to chose between left and right alignment for the OSD temperature sensor labels. Valid values are `LEFT` and `RIGHT` |
| display_force_sw_blink | OFF | OFF = OSD hardware blink / ON = OSD software blink. If OSD warning text/values are invisible, try setting this to ON |
| magzero_x | 0 | Magnetometer calibration X offset. If its 0 none offset has been applied and calibration is failed. |
| magzero_y | 0 | Magnetometer calibration Y offset. If its 0 none offset has been applied and calibration is failed. |