diff --git a/src/main/target/SPEEDYBEEF7MINI/CMakeLists.txt b/src/main/target/SPEEDYBEEF7MINI/CMakeLists.txt
new file mode 100644
index 0000000000..c7a9261274
--- /dev/null
+++ b/src/main/target/SPEEDYBEEF7MINI/CMakeLists.txt
@@ -0,0 +1 @@
+target_stm32f722xe(SPEEDYBEEF7MINI)
diff --git a/src/main/target/SPEEDYBEEF7MINI/config.c b/src/main/target/SPEEDYBEEF7MINI/config.c
new file mode 100644
index 0000000000..1e69aaa33c
--- /dev/null
+++ b/src/main/target/SPEEDYBEEF7MINI/config.c
@@ -0,0 +1,33 @@
+/*
+ * This file is part of Cleanflight.
+ *
+ * Cleanflight is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * Cleanflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with Cleanflight.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+
+#include "platform.h"
+
+#include "fc/fc_msp_box.h"
+
+#include "io/piniobox.h"
+#include "io/serial.h"
+
+void targetConfiguration(void)
+{
+    serialConfigMutable()->portConfigs[findSerialPortIndexByIdentifier(SERIAL_PORT_USART6)].functionMask = FUNCTION_MSP;
+    serialConfigMutable()->portConfigs[findSerialPortIndexByIdentifier(SERIAL_PORT_USART6)].msp_baudrateIndex = BAUD_115200;
+
+    pinioBoxConfigMutable()->permanentId[0] = BOXARM;
+}
diff --git a/src/main/target/SPEEDYBEEF7MINI/target.c b/src/main/target/SPEEDYBEEF7MINI/target.c
new file mode 100644
index 0000000000..e2fa12d545
--- /dev/null
+++ b/src/main/target/SPEEDYBEEF7MINI/target.c
@@ -0,0 +1,50 @@
+/*
+ * This file is part of INAV.
+ *
+ * INAV is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * INAV is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with INAV.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+
+#include "platform.h"
+
+#include "drivers/bus.h"
+#include "drivers/io.h"
+#include "drivers/pwm_mapping.h"
+#include "drivers/timer.h"
+#include "drivers/pinio.h"
+#include "drivers/sensor.h"
+
+BUSDEV_REGISTER_SPI_TAG(busdev_mpu6000,     DEVHW_MPU6000,      MPU6000_SPI_BUS,    MPU6000_CS_PIN,     MPU6000_EXTI_PIN,       0,  DEVFLAGS_NONE,  IMU_MPU6000_ALIGN);
+
+const timerHardware_t timerHardware[] = {
+    DEF_TIM(TIM3, CH1, PB4,   TIM_USE_MC_MOTOR | TIM_USE_FW_SERVO, 0, 0),   // S1   UP1-2   D(1, 4, 5)
+    DEF_TIM(TIM3, CH2, PB5,   TIM_USE_MC_MOTOR | TIM_USE_FW_SERVO, 0, 0),   // S2   UP1-2   D(1, 5, 5)
+    DEF_TIM(TIM3, CH3, PB0,   TIM_USE_MC_MOTOR | TIM_USE_FW_SERVO, 0, 0),   // S3   UP1-2   D(1, 7, 5)
+    DEF_TIM(TIM3, CH4, PB1,   TIM_USE_MC_MOTOR | TIM_USE_FW_SERVO, 0, 0),   // S4   UP1-2   D(1, 2, 5)
+
+    DEF_TIM(TIM2, CH1, PA15,  TIM_USE_MC_MOTOR | TIM_USE_FW_SERVO, 0, 0),   // S5   UP1-7   D(1, 5, 3) - clash with S2
+    DEF_TIM(TIM2, CH2, PB3,   TIM_USE_MC_MOTOR | TIM_USE_FW_SERVO, 0, 0),   // S6   UP1-7   D(1, 6, 3)
+
+    DEF_TIM(TIM4, CH1, PB6,   TIM_USE_MC_SERVO | TIM_USE_FW_MOTOR, 0, 0),   // S7   UP1-6   D(1, 0, 2)
+    DEF_TIM(TIM4, CH2, PB7,   TIM_USE_MC_SERVO | TIM_USE_FW_MOTOR, 0, 0),   // S8   UP1-6   D(1, 3, 2)
+
+    DEF_TIM(TIM8, CH3, PC8,  TIM_USE_LED, 0, 0),                            // LED          D(2, 6, 0)
+
+    DEF_TIM(TIM1, CH3, PA10,  TIM_USE_PPM, 0, 0),                            // PPM, RX1
+
+    DEF_TIM(TIM5, CH3, PA2,  TIM_USE_PWM, 0, 0),                            // TX2 & softserial1
+};
+
+const int timerHardwareCount = sizeof(timerHardware) / sizeof(timerHardware[0]);
diff --git a/src/main/target/SPEEDYBEEF7MINI/target.h b/src/main/target/SPEEDYBEEF7MINI/target.h
new file mode 100644
index 0000000000..b0b8a051b6
--- /dev/null
+++ b/src/main/target/SPEEDYBEEF7MINI/target.h
@@ -0,0 +1,175 @@
+/*
+ * This file is part of INAV.
+ *
+ * INAV is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * INAV is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with INAV.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#pragma once
+
+#define TARGET_BOARD_IDENTIFIER "SBMN"
+#define USBD_PRODUCT_STRING  "SPEEDYBEEF7MINI"
+
+#define LED0                    PA14  //Blue   SWCLK
+
+#define BEEPER                  PC13
+#define BEEPER_INVERTED
+
+// *************** SPI1 Gyro & ACC *******************
+#define USE_TARGET_IMU_HARDWARE_DESCRIPTORS
+
+#define USE_SPI
+#define USE_SPI_DEVICE_1
+#define SPI1_SCK_PIN            PA5
+#define SPI1_MISO_PIN           PA6
+#define SPI1_MOSI_PIN           PA7
+
+#define USE_IMU_MPU6000
+#define IMU_MPU6000_ALIGN       CW0_DEG
+#define MPU6000_CS_PIN          PB2
+#define MPU6000_SPI_BUS         BUS_SPI1
+#define MPU6000_EXTI_PIN        PC4
+
+#define USE_EXTI
+#define USE_MPU_DATA_READY_SIGNAL
+
+// *************** I2C /Baro/Mag *********************
+#define USE_I2C
+#define USE_I2C_DEVICE_1
+#define I2C1_SCL                PB8
+#define I2C1_SDA                PB9
+
+#define USE_BARO
+#define BARO_I2C_BUS            BUS_I2C1
+#define USE_BARO_BMP280
+#define USE_BARO_MS5611
+#define USE_BARO_DPS310
+
+#define USE_MAG
+#define MAG_I2C_BUS             BUS_I2C1
+#define USE_MAG_AK8975
+#define USE_MAG_HMC5883
+#define USE_MAG_QMC5883
+#define USE_MAG_IST8310
+#define USE_MAG_IST8308
+#define USE_MAG_MAG3110
+#define USE_MAG_LIS3MDL
+
+#define TEMPERATURE_I2C_BUS     BUS_I2C1
+
+#define PITOT_I2C_BUS           BUS_I2C1
+
+#define USE_RANGEFINDER
+#define RANGEFINDER_I2C_BUS     BUS_I2C1
+
+// *************** SPI2 OSD ***********************
+#define USE_SPI_DEVICE_2
+#define SPI2_SCK_PIN            PB13
+#define SPI2_MISO_PIN           PB14
+#define SPI2_MOSI_PIN           PB15
+
+#define USE_MAX7456
+#define MAX7456_SPI_BUS         BUS_SPI2
+#define MAX7456_CS_PIN          PB12
+
+// *************** SPI3 SD BLACKBOX*******************
+#define USE_SPI_DEVICE_3
+#define SPI3_SCK_PIN            PC10
+#define SPI3_MISO_PIN           PC11
+#define SPI3_MOSI_PIN           PC12
+
+#define USE_FLASHFS
+#define USE_FLASH_M25P16
+#define M25P16_SPI_BUS          BUS_SPI3
+#define M25P16_CS_PIN           PD2
+#define ENABLE_BLACKBOX_LOGGING_ON_SPIFLASH_BY_DEFAULT
+
+// *************** UART *****************************
+#define USE_VCP
+#define USB_DETECT_PIN          PC14
+#define USE_USB_DETECT
+
+#define USE_UART1
+#define UART1_TX_PIN            PA9
+#define UART1_RX_PIN            PA10
+
+#define USE_UART2
+#define UART2_TX_PIN            PA2
+#define UART2_RX_PIN            PA3
+
+#define USE_UART3
+#define UART3_TX_PIN            PB10
+#define UART3_RX_PIN            PB11
+
+#define USE_UART4
+#define UART4_TX_PIN            PA0
+#define UART4_RX_PIN            PA1
+
+#define USE_UART6
+#define UART6_TX_PIN            PC6
+#define UART6_RX_PIN            PC7
+     
+#define USE_SOFTSERIAL1
+#define SOFTSERIAL_1_TX_PIN      PA2
+#define SOFTSERIAL_1_RX_PIN      PA2
+
+#define SERIAL_PORT_COUNT       7
+
+#define DEFAULT_RX_TYPE         RX_TYPE_SERIAL
+#define SERIALRX_PROVIDER       SERIALRX_SBUS
+#define SERIALRX_UART           SERIAL_PORT_USART1
+
+// *************** ADC *****************************
+#define USE_ADC
+#define ADC_INSTANCE                ADC1
+#define ADC1_DMA_STREAM             DMA2_Stream0
+
+#define ADC_CHANNEL_1_PIN           PC2
+#define ADC_CHANNEL_2_PIN           PC1
+#define ADC_CHANNEL_3_PIN           PC0
+#define ADC_CHANNEL_4_PIN           PA4
+
+#define VBAT_ADC_CHANNEL            ADC_CHN_1
+#define CURRENT_METER_ADC_CHANNEL   ADC_CHN_2
+#define RSSI_ADC_CHANNEL            ADC_CHN_3
+#define AIRSPEED_ADC_CHANNEL           ADC_CHN_4
+
+// *************** PINIO ***************************
+#define USE_PINIO
+#define USE_PINIOBOX
+#define PINIO1_PIN                  PC9 // RF Switch
+#define PINIO1_FLAGS                PINIO_FLAGS_INVERTED
+
+// *************** LEDSTRIP ************************
+#define USE_LED_STRIP
+#define WS2811_PIN                  PC8
+
+#define DEFAULT_FEATURES                (FEATURE_OSD | FEATURE_CURRENT_METER | FEATURE_VBAT | FEATURE_TX_PROF_SEL | FEATURE_BLACKBOX)
+#define CURRENT_METER_SCALE     250
+#define CURRENT_METER_OFFSET    -500
+
+#define USE_SERIAL_4WAY_BLHELI_INTERFACE
+
+#define TARGET_IO_PORTA 0xffff
+#define TARGET_IO_PORTB 0xffff
+#define TARGET_IO_PORTC 0xffff
+#define TARGET_IO_PORTD 0xffff
+
+#define MAX_PWM_OUTPUT_PORTS        8
+#define USE_DSHOT
+#define USE_SERIALSHOT
+#define USE_ESC_SENSOR
+
+#define BNO055_I2C_BUS          BUS_I2C1
+